Used Mdf for sale (220)

Condition: new, Year of construction: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Commodity code: 84659600 Feed opening 800x1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3-phase Blades: multiple, rotatable Hydraulically operated slide Screen opening as desired (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (l x w x h) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard features include: - Automatic star/delta starter - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing stepped control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant The shredder is designed for shredding untreated wood, chipboard and MDF boards, and other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,140 net - Articulating conveyor belt + €8,770 net Horizontal section: 1200 mm Rising section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Over-band magnet + €5,980 net - Control system for conveyor belt and over-band magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the raw material: Bdedpfsd Dgw Uex Al Uog - Moisture content (as received) must be below 30% - Installation temperature: temperature-controlled room at a minimum of +5°C - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear.

Condition: used, Used Italpresse UT/6 hot press for surface finishing by applying veneers to chipboard, plywood, MDF, solid wood, or plastic laminates, also suitable for aluminum and other metals. The press platens are solid plates made of perforated steel. Platen dimensions: 3000 x 1300 mm. Maximum opening: 400 mm. Platen heating is achieved with heat transfer oil and an electric boiler, complete with a circulation pump. Boiler: 27 kW - 380 V. Selector switch for using 50% of the boiler's power (13.5 kW in 1st position) or 27 kW in 2nd position. Pressing time can be set with automatic opening. Maximum pressure: 300 bar. Bdsdpfx Aszkt Tiel Uog Option to exclude 2 lateral cylinders from the control panel. Protective Mylar film on the platens. Machine dimensions: 3700 x 1700 x H. 2100 mm. Weight: 6600 kg. Machine complies with CE standards.

Condition: as good as new (ex-display), Year of construction: 2021, input current: 81 A, input frequency: 60 Hz, type of input current: three-phase, total length: 1,830 mm, total width: 1,618 mm, total height: 2,400 mm, overall weight: 5,000 kg, operating temperature: 140 °C, cylinder diameter: 65 mm, opening width: 100 mm, Shelf press for veneer , plywood , MDF, particle board, solid wood, etc. Manufacturer : JOOS Model: HPS 20 year of production 2021 Total pressure force : 200 kN 4 cylinders ⌀ 65 mm x 400 mm Maximum hydraulic working pressure : 150 bar Pressure : 2.0 daN / cm2 5 heating plates size : 1000mm x 1000mm Operating temperature : 0℃ - 140℃. Infinitely adjustable temperature. Timer to set the working time , after the set time the press automatically opens. Heating power - 5 x 12 kW Total power - 64 kW (81A , 60Hz) Bjdpfx Aet Eq E Sol Uedg Weight - 5000 kg Press new - never used Full technical documentation included.

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK MZS21X1 Multi-Spindle Boring Machine – Professional Precision for Furniture Manufacturing The CORMAK MZS21X1 multi-spindle boring machine is a professional solution for woodworking shops and furniture manufacturers that demand maximum precision, productivity, and reliability in high-volume drilling operations. Designed for accurate drilling in solid wood, MDF, plywood, and other wood-based materials, the machine provides complete process control and exceptional repeatability when producing holes for furniture fittings and joinery. Main advantages of the machine Pneumatic drilling head with 0°–90° tilt adjustment – features intermediate locking positions and a 45° reference point for quick setup. 21 working spindles – allow multiple holes to be drilled simultaneously, making the machine ideal for cabinet and furniture production. Mechanical digital position indicator – enables precise drilling height adjustment. 1.5 kW motor – delivers stable power and high operating efficiency. Pneumatic workpiece clamping system – ensures secure material positioning and consistent drilling accuracy. Automatic return of the drilling head – the unit automatically retracts after reaching the preset drilling depth. Adjustable feed speed – allows drilling parameters to be optimized for different materials. Support rollers and aluminum fence – extendable for workpieces up to 3 m in length. Quiet and efficient operation – achieved through precision-engineered components and a rigid machine design. Construction and technology The CORMAK MZS21X1 is built on a rigid steel frame that minimizes vibration and ensures outstanding drilling accuracy. The drilling head can be quickly adjusted to the required angle, while tool changes are simple and efficient. All spindle drive components are robustly mounted to ensure long service life, even under intensive industrial use. The pneumatic system is compatible with standard workshop air supplies operating at 6–8 bar. Precision and work efficiency The machine enables accurate drilling for dowels, hinges, and other furniture fittings in a single operation. With 21 spindles and adjustable drilling position and angle, operators gain exceptional flexibility for complex production tasks. The mechanical position indicator and digital adjustment display allow fast machine setup and significantly reduce changeover times between production batches, improving overall manufacturing efficiency. Applications The CORMAK MZS21X1 multi-spindle boring machine is suitable for: furniture manufacturing plants, woodworking workshops, interior fitting and cabinet production, manufacturers of wooden components, small and medium-sized production facilities requiring fast and repeatable drilling operations. Standard equipment 21-spindle drilling head Pneumatic workpiece clamps Aluminum fence with support rollers Digital height indicator Foot pedal control Complete set of drill holders and tool mounts Optional equipment Dust extraction systems Technical specifications Parameter Value Number of spindles 21 Spindle spacing 32 mm Maximum drill bit diameter 10 mm Bjdpfx Ajvuf Rljl Uedg Maximum drilling depth 60 mm Maximum drilling diameter 35 mm Power supply 400 V Maximum working area 3000 × 2500 mm Spindle speed 2,840 rpm Required air pressure 0.6–0.8 MPa Motor power 1.5 kW Dimensions (without table extensions) 1400 × 1300 × 1400 mm Weight 350 kg

Condition: used, power: 185 kW (251.53 HP), gearing type: automatic, fuel type: diesel, first registration: 01/2017, emission class: euro4, The Forus SE 250 (2017) is a powerful two-shaft pre-shredder, specially designed for processing various materials such as household waste, commercial waste, waste wood, green cuttings, electronic scrap, film, and paper. With its robust design and versatile equipment, it is ideal for use in recycling companies, composting plants, and by agricultural contractors. Technical data: Drive: Diesel engine: Volvo TAD8, 185 kW (251 HP), EU Stage IV Alternatively: Electric motor with 132 kW Shredding unit: Two rotors with a diameter of 570 mm Multifunctional unit (asynchronous) or triangle blades (synchronous) Number of blades: 65 (multifunctional) or 40 or 80 (triangle blades) Rotor speed: 5–30 rpm (multifunctional) or 14–26 rpm (triangle blades) Throughput (depending on material): Household waste: up to 25 t/h Waste wood: up to 20 t/h Commercial waste: up to 12 t/h Green cuttings: up to 15 t/h Biomass: up to 50 t/h Final grain sizes: 150–500 mm, depending on selected breaker bar Dimensions: Working position (L×W×H): 10,000 × 2,500 × 3,300 mm Transport position (L×W×H): 7,800 × 2,500 × 2,500 mm Weight: approx. 15,000 Equipment & options: Hydraulically raisable and lowerable overband magnet Hydraulically adjustable breaker bar (type A1–A4) Radio remote control for all functions Large loading hopper for easy filling Galvanized conveyor frame Optional: crawler chassis Areas of application: The Forus SE 250 is excellent for: Shredding household and commercial waste Processing waste wood, chipboard, and MDF boards Composting green cuttings and rootstocks Preparation of biomass for energy production Recycling of electronic waste, film, and paper Bjdewqqyvepfx Al Uedg

Condition: new, storage positions 24 Boxen weight 25 kg Bjdeupxm Sepfx Al Ujdg dimensions 850 x 400 x 1650 mm Dimensions of the container 26 x 40 x 16 cm. Internal dimensions of the containers 23 x 35 x 15.5 cm. MDF cover plate thickness 10 mm. PP material (polypropylene) Overall dimensions 85 x 40 x 165 cm.

Condition: used, Year of construction: 2016, operating hours: 2,000 h, functionality: fully functional, Panel Laminating Line for AKRYL, PET, PVC, HPL, CPL MASTER PUR-1400 Professional line for single-sided laminating of panels using PUR hot melt adhesive. Application: The machine is designed for laminating: MDF particleboard plywood PVC boards gypsum boards other wood-based materials Supported finishing materials: AKRYL PVC HPL PET CPL decorative paper Technical specifications: Working width: 1400 mm Maximum panel size: 2800 × 1300 mm Panel thickness: 2–40 mm Operating speed: 5–17 m/min Output: 3–5 pieces/min Maximum output: approx. 1200 pieces/8 h Drive power: 21.49 Kw Heating power: 51.7 Kw Line dimensions: approx. 16 × 2.5 × 2 m Required floor space: min. 6 × 22 m Line equipment: Bdodszkmqbspfx Al Ueg feeder with roller conveyor brushing machine for cleaning panels IR oven for preheating the material 3-roller PUR adhesive applicator foil feeding station roller nip press receiving conveyor 208-liter PUR adhesive melting tank Advantages: high surface quality even adhesive application possibility of laminating high-gloss films low adhesive consumption stable operation in serial production

Condition: new, Year of construction: 2026, The CORMAK PS315-2000 sliding table saw with scoring unit is a solid, precise, and versatile panel saw designed for use in woodworking shops, furniture manufacturing facilities, and material processing workshops. Thanks to its compact 2000 mm sliding table length, robust guides, and reliable scoring system, this model is perfectly suited for serial cutting of MDF, HDF, plywood, and solid wood. Main advantages of the machine Sliding table saw with scoring blade – the two-blade cutting system ensures clean cuts without chipping, even in laminated and single-sided coated materials. Stable and durable construction – a strong frame, cast iron tables, and steel guide systems guarantee long service life and resistance to deformation. Wide adjustment range – blade tilt from 90° to 45° and main blade height adjustment allow a wide range of angled and deep cuts. High spindle speed – 5800 rpm of the main blade ensures fast, clean cutting without burning the material. Dust extraction compatibility – an integrated extraction port enables effective connection to a dust collection system. Safety and ergonomics – blade guard, graduated side fence, and protective components improve operator comfort and workplace safety. Construction and technology The PS315-2000 sliding table saw has been designed with maximum stability and reliability in mind. The machine is built on a rigid steel frame, while the main working surfaces are made of precisely ground cast iron. The main cutting blade (Ø315 mm) works together with the scoring blade (Ø90 mm), eliminating the risk of chipping and splintering. The machine is equipped with two independent drives, ensuring separate operation of both cutting systems. Material movement is supported by a sliding carriage with a bearing-guided system, while clear length and angle scales allow quick and accurate adjustment of cutting parameters. Precision and working efficiency The CORMAK PS315-2000 panel saw has been optimized for accurate processing and ease of operation. Thanks to rotational speeds of 5800 rpm for the main blade and 4000 rpm for the scoring blade, cuts are smooth, precise, and free from burrs, reducing the need for additional finishing. The adjustable blade tilt system allows precise angled cuts without repositioning the material. Applications The PS315-2000 is a versatile panel saw designed for: Professional woodworking companies, Furniture manufacturers and wooden component producers, Workshops processing MDF, HDF, OSB, plywood, and solid wood, Companies cutting structural and finishing elements. Standard equipment Main cutting blade Scoring blade 2000 mm sliding table with support Rip fence and crosscut fence Mitre guide for angled cuts Blade guard with extraction port Table extension Eccentric clamp Blade angle indicator Polish-language operating manual (DTR) CE declaration of conformity Technical specifications Parameter Specification Sliding table length 2000 mm Cutting width 1220 mm Blade tilt range 45° Cutting height at 45° 80 mm Cutting height at 90° 100 mm Maximum blade diameter 315 mm Maximum scoring blade diameter 100 mm Bodevuf Rfepfx Al Ujdg Main blade speed 5800 rpm Scoring blade speed 4000 rpm Motor power 3.8 kW Power supply 3-phase, 400 V Dust extraction port 100 mm Weight 350 kg Warranty 12 months Technical documentation (DTR) Included CE declaration Yes

Condition: new, Year of construction: 2026, CORMAK MJ45-KB4 - 1600 Panel Saw with Scoring Unit The CORMAK MJ45-KB4 - 1600 is a professional panel saw with a scoring unit, designed for precise woodworking in carpentry workshops, production facilities, and service workshops. The machine combines industrial performance with the cutting accuracy required for processing furniture boards, MDF, and plywood. Its stable construction, independent scoring blade drive, and carefully engineered guiding systems ensure repeatability and industrial-level cutting quality. Main Advantages of the Machine 1600 mm aluminium sliding table – ensures smooth movement and precise guidance of the workpiece. Independent 0.75 kW scoring motor – eliminates the risk of chipping and tearing on the underside of the material. Powerful main saw motor – 5.5 kW (9 HP) motor provides efficient cutting performance even in hard materials. Stable cast iron construction – resistant to vibrations, improving precision and operational safety. Telescopic support arm with ruler and two stops – enables accurate positioning of the workpiece. Cutting width up to 1250 mm – ideal for formatting large panels. Ergonomic blade height and angle adjustment knobs – allow quick and tool-free setup. Construction and Technology The MJ45-KB4 - 1600 is built on a heavy cast iron body, providing high resistance to twisting and maintaining stable geometry throughout years of operation. The cutting unit operates inside a rigid housing, which reduces vibrations and increases blade durability. The sliding table guidance system is based on hardened steel rods and precision linear bearings, ensuring smooth movement and eliminating play during cutting. The machine is also equipped with a roller support table, making it easier to handle large-format materials. Precision and Work Efficiency Thanks to high blade speeds of up to 6000 rpm and a precise guiding system, the MJ45-KB4 panel saw provides perfectly straight and clean cutting edges, even when processing layered boards. The scoring blade, rotating at 8000 rpm, effectively eliminates laminate chipping and tearing. The adjustable cutting angle range of 0–45° allows complex formatting operations to be carried out with full control and accuracy. Applications Bdsdetz Srlepfx Al Ujg The MJ45-KB4 - 1600 panel saw with scoring unit is designed for intensive use in: woodworking workshops, furniture manufacturing plants, prototype departments, architectural and model-making studios. It is ideal for processing: MDF boards, HDF boards, OSB panels, plywood, laminates, solid wood. The machine design enables quick setup changes and efficient production of both short series and individual projects without compromising quality. Standard Equipment 1600 mm aluminium sliding table Independently driven 0.75 kW scoring unit Telescopic support arm with ruler and two stops Roller support table Folding parallel fence Telescopic rip fence Adjustment knobs for blade angle and height Technical Specifications Parameter Value Sliding table length 1600 mm Cutting width 1250 mm Saw blade tilt range 0–45° Cutting height at 90° 80 mm Cutting height at 45° 56 mm Maximum main blade diameter 315 mm Maximum scoring blade diameter 125 mm Main saw speed 4000 / 6000 rpm Scoring blade speed 8000 rpm Main motor power (S1/S6) 5.5 kW / 9 HP Scoring motor power (S1/S6) 0.75 kW / 1.2 HP Machine weight 460 kg

Condition: new, Year of construction: 2026, The CORMAK PS12E-3000 is an industrial panel saw with a scoring unit, designed for intensive operation in woodworking plants, furniture workshops, and production facilities. It is a high-performance machine for precise processing of wood-based panels, MDF, HDF, plywood, and solid wood. Equipped with an advanced cutting system, the PS12E-3000 panel saw enables chip-free operation, even when performing complex angled formatting cuts. Main Advantages of the Machine Precise chip-free cutting – thanks to the additional scoring blade, the panel saw perfectly handles laminated boards, preventing surface damage and chipping. Large 3000 × 270 mm sliding table – the bearing-mounted carriage ensures stable material guidance while maintaining maximum cutting accuracy. Cutting width up to 1220 mm – suitable for large-format panels and oversized workpieces. Angled cutting capability (0–45°) – precise adjustment of the main blade tilt allows a wide range of woodworking applications. High-performance motor – 3.8 kW (S1) power ensures continuous and reliable operation during demanding production tasks. Thought-out ergonomics – convenient control panel, blade height locking system, and connection point for dust extraction. Construction and Technology The construction of the PS12E-3000 panel saw is based on a rigid steel frame resistant to twisting and vibration. The main worktable (800 × 385 mm) and side table (880 × 800 mm) are made from durable materials, ensuring long-term stability and reliability. The sliding carriage moves smoothly on precision guides, allowing accurate positioning and controlled movement of the workpiece. The main cutting blade with a diameter of 315 mm works together with a 100 mm scoring blade, providing excellent results when formatting panels. Blade replacement is quick and convenient thanks to the practical mounting system. Precision and Work Efficiency The PS12E-3000 circular panel saw for wood provides excellent dimensional repeatability and clean cutting edges during every operation. Thanks to high rotational speeds: 4000 rpm – main blade 5800 rpm – scoring blade the machine enables fast and accurate cutting, even in demanding materials. Performance is supported by a powerful drive system and precise adjustment of cutting depth and blade angle. Applications The CORMAK PS12E-3000 panel saw is used in: furniture manufacturing and interior fitting production, professional woodworking and carpentry workshops, cutting prefabricated wood-based panels, precision sizing of structural and finishing materials. It is an ideal solution for companies looking for a machine that combines high power, accuracy, and versatility. Standard Equipment Main cutting blade 305 × 30 mm Scoring blade 90 × 20 mm Support arm and rip fence Worktable extension Mitre fence Blade angle indicator Eccentric clamp Technical Specifications Parameter Value Sliding table dimensions 3000 × 270 mm Main table dimensions 800 × 385 mm Side auxiliary table dimensions 880 × 800 mm Cutting width 1220 mm Bdsdpfx Aovugc Ajl Uog Saw blade tilt range 0–45° Cutting height at 90° 100 mm Cutting height at 45° 80 mm Maximum main blade diameter 315 mm Maximum scoring blade diameter 100 mm Main blade speed 4000 rpm Scoring blade speed 5800 rpm Motor power S6 5.3 kW / 7.1 HP Motor power S1 3.8 kW / 5.1 HP Power supply 400 V Weight 309 kg

Condition: new, Year of construction: 2026, CORMAK MJ45-KB4 - 2000 Panel Saw with Scoring Unit The CORMAK MJ45-KB4 - 2000 is a professional panel saw with a scoring unit, designed for precise woodworking in professional woodworking shops, production facilities, and service workshops. The machine combines industrial-level performance with the cutting accuracy required for processing furniture boards, MDF, and plywood. Its stable construction, independent scoring blade drive, and carefully engineered guiding systems ensure repeatability and cutting quality at an industrial level. Main Advantages of the Machine 2000 mm aluminium sliding table – ensures smooth movement and precise material guidance. Independent 0.75 kW scoring motor – eliminates chipping and tearing on the underside of the material. Powerful main saw motor – 5.5 kW (9 HP) motor provides efficient cutting performance in hard materials. Stable cast iron construction – resistant to vibrations, improving precision and operator safety. Telescopic support arm with ruler and two stops – enables accurate positioning of the workpiece. Cutting width up to 1250 mm – ideal for formatting large panels. Ergonomic adjustment knobs for blade angle and height – allow fast tool-free setup. Construction and Technology The MJ45-KB4 - 2000 is based on a heavy cast iron body, providing excellent resistance to twisting and maintaining stable geometry throughout years of operation. The cutting unit operates inside a rigid housing, which reduces vibrations and increases blade durability. The sliding table guidance system is based on hardened steel rods and precision linear bearings, ensuring smooth movement and eliminating play during cutting. The machine is also equipped with a roller support table, making it easier to handle large-format materials. Precision and Work Efficiency Thanks to high blade speeds of up to 6000 rpm and a precise guiding system, the MJ45-KB4 panel saw provides perfectly straight and clean cutting edges, even when processing layered panels. The scoring blade, rotating at 8000 rpm, effectively eliminates laminate chipping and tearing. The adjustable cutting angle range of 0–45° allows the operator to perform complex formatting operations with full control. Applications The MJ45-KB4 - 2000 panel saw with scoring unit is designed for intensive use in: woodworking workshops, furniture manufacturing plants, prototype production departments, architectural and model-making studios. It is ideal for processing: MDF boards, HDF boards, OSB panels, plywood, laminates, solid wood. Bdedetz Sm Aopfx Al Ueg The machine design allows quick setup changes and efficient production of both short series and individual projects without compromising quality. Standard Equipment 2000 mm aluminium sliding table Independently driven 0.75 kW scoring unit Telescopic support arm with ruler and two stops Roller support table Folding parallel fence Telescopic rip fence Adjustment knobs for blade angle and height Technical Specifications Parameter Value Sliding table length 2000 mm Cutting width 1250 mm Saw blade tilt range 0–45° Maximum cutting height at 90° 80 mm Maximum cutting height at 45° 56 mm Maximum main blade diameter 315 mm Maximum scoring blade diameter 125 mm Main saw speed 4000 / 6000 rpm Scoring blade speed 8000 rpm Main motor power S1/S6 5.5 kW / 9 HP Scoring motor power S1/S6 0.75 kW / 1.2 HP Weight 460 kg

Condition: new, Year of construction: 2026, The CORMAK PS315PRO-2000 sliding table saw with scoring unit is a solid, precise, and versatile machine designed for use in carpentry workshops, furniture manufacturing plants, and wood-based material processing facilities. Thanks to its compact 2000 mm sliding table length, heavy-duty guides, and reliable scoring system, this model performs excellently in the serial cutting of MDF, HDF, plywood, and solid wood panels. Main Advantages of the Machine Sliding table saw with scoring unit – a dual-blade system ensures chip-free cutting, even in laminated and single-sided foil-coated materials. Stable and durable construction – a robust frame, cast iron tables, and steel guides guarantee long service life and resistance to deformation. Wide adjustment range – blade tilt from 90° to 45° and adjustable main blade height allow for a wide variety of angle and depth cuts. High rotational speed – 5800 RPM of the main blade ensures clean, fast cuts without material burn marks. Dust extraction compatibility – an integrated extraction port enables efficient connection to a dust collection system. Safety and ergonomics – blade guard, rip fence with scale, and safety components increase comfort and operational safety. Construction and Technology The PS315PRO-2000 sliding table saw has been designed for maximum stability and reliability. It features a rigid steel frame base, while the main working surfaces are made of precision-ground cast iron. The main cutting blade (Ø 315 mm) works together with a scoring blade (Ø 90 mm), eliminating the risk of chipping. The machine is equipped with two separate motors, ensuring independent operation of both cutting systems. Material movement is supported by a sliding carriage with a bearing-mounted guide. Clear length and angle scales allow for quick and precise cutting parameter adjustments. Precision and Performance The CORMAK PS315PRO-2000 sliding table saw has been optimized for machining accuracy and ease of use. With rotational speeds of 5800 RPM (main blade) and 4000 RPM (scoring blade), cuts are smooth, burr-free, and minimize the need for further finishing. The adjustable blade tilt enables precise angle cuts without the need to reposition the material. Standard Equipment Main cutting blade Scoring blade 2000 mm sliding table with support Rip fence and crosscut fence Mitre guide Blade guard with dust extraction port Table extension Bdedpfxeylxhve Al Ueg Eccentric clamp Blade tilt angle indicator Operation manual CE Declaration of Conformity Optional Equipment Additional cutting blades Dust extraction system Technical Specifications Parameter Value Sliding table length 2000 mm Cutting width 1220 mm Blade tilt 45° Cutting height at 45° 80 mm Cutting height at 90° 100 mm Max. main blade diameter 315 mm Max. scoring blade diameter 100 mm Main blade speed 5800 RPM Scoring blade speed 4000 RPM Motor power 3.0 kW Power supply 400 V Dust extraction port 100 mm Weight 350 kg Warranty 12 months Manual included YES CE Declaration YES

Condition: new, Year of construction: 2026, CORMAK PS12E-2000 Panel Saw with Scoring Unit The CORMAK PS12E-2000 panel saw with scoring unit is a solid and precise woodworking machine designed for cutting furniture boards, MDF, HDF, plywood, and other wood-based materials. Thanks to its dual cutting system (main blade + scoring blade), the machine guarantees clean cutting edges without chipping or splintering, which is essential in furniture production and interior finishing applications. Main Advantages of the Machine Dual cutting system: main blade + scoring blade – eliminates the risk of laminate tearing and ensures clean edges. Stable cast iron worktable – provides precision and rigidity even under heavy loads. Large 2000 mm sliding table – designed for cutting large-size workpieces. Powerful 3.8 kW (400V) motor – enables effortless cutting of even hard materials. Adjustable cutting angle up to 45° – allows precise bevel cuts without loss of accuracy. Precision side fence – equipped with an accurate scale for repetitive cutting operations. Dust extraction system – efficient removal of sawdust improves cleanliness and workplace safety. Complete standard equipment – includes scoring blade, measuring guides, blade guard, angle indicator, and accessories. Construction and Technology The construction of the CORMAK PS12E-2000 panel saw is based on a precision-ground cast iron table and a bearing-mounted sliding table with support, ensuring stability and full control over the material during cutting. High-quality guide rails provide smooth and accurate table movement, while the reinforced machine body minimizes vibrations. The ergonomic front-mounted control panel allows convenient adjustment of cutting height and blade angle. Bjdpovuf Tmsfx Al Usdg The blades are driven by a 3.8 kW motor, providing sufficient power reserve for demanding applications and difficult-to-cut materials. Precision and Work Efficiency The CORMAK PS12E-2000 panel saw with scoring unit has been designed for high repeatability and accuracy. Cutting depth and angle adjustments are carried out using locking adjustment knobs, increasing both safety and operator comfort. High blade speeds, including up to 5800 rpm for the scoring blade, enable fast and clean cuts without burning or damaging the material surface. Applications This panel saw is designed for: Professional woodworking workshops Furniture manufacturing companies Custom woodworking businesses Prototype production departments It is ideal for daily production, dimension cutting, and complex projects requiring precise angled cuts. It is the perfect solution wherever cutting accuracy, edge quality, and reliability are essential. Standard Equipment Main cutting blade Scoring blade Crosscut fence Rip fence Blade guard Table extension Mitre fence Blade angle indicator Eccentric clamp User manual EC Declaration of Conformity Technical Specifications Parameter Value Sliding table length 2000 mm Cutting width on right side 1260 mm Saw blade tilt range 45° Cutting height at 45° 80 mm Cutting height with 315 mm blade at 90° 100 mm Cutting height with 300 mm blade at 90° 95 mm Maximum main blade size 315 × 30 mm Maximum scoring blade size 100 × 20 mm Main blade speed 4500 rpm Scoring blade speed 5800 rpm Motor power S1/S6 3.8 kW / 6.1 HP Power supply 3-phase, 400V Weight 275 kg Warranty 12 months Technical documentation (DTR) Included CE Declaration Yes

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK MJ45-KD3 Sliding Table Saw The CORMAK MJ45-KD3 sliding table saw is a high-class panel saw designed for precise cutting of MDF, HDF, chipboard, laminated boards, ABS, PVC, and solid wood. Thanks to its integrated scoring unit and large sliding table, the machine delivers perfect cuts without chipping or tearing. It is a reliable solution for furniture manufacturers, woodworking workshops, and companies processing wood materials that require high productivity, precision, and repeatability in daily operation. Main Advantages of the Machine High-performance sliding table saw with scoring unit – ideal for cutting furniture boards and composite materials. 5.5 kW Kacperek main motor – provides reliability, durability, and sufficient power for operation with Ø350 mm saw blades. Bdjdovuf Iqjpfx Al Ueg Precision Ø125 mm scoring unit – rotating at 7500 rpm, it eliminates chipping on the underside of panels. Strong welded closed-profile steel frame – ensures maximum rigidity and structural stability. Cutting angle range from 0° to 45° – enabled by a patented tilting system of the cutting unit. Large and stable 3200 × 420 mm sliding table – facilitates precise cutting of large-format panels. Automatic blade lifting system – improves convenience and safety during setup. Construction and Technology The CORMAK MJ45-KD3 panel saw has been designed for intensive industrial operation. The machine is built on a durable steel frame that effectively reduces vibration and improves machining accuracy. The cutting unit allows installation of saw blades ranging from Ø250 to Ø350 mm and works together with a precise Ø125 mm scoring blade, making the machine highly versatile for various woodworking applications. High-quality components ensure long-term reliability, easy maintenance, and stable performance even during demanding production processes. Precision and Working Efficiency The CORMAK MJ45-KD3 sliding table saw with scoring unit provides excellent repeatability and clean cutting edges thanks to precise table guidance and high spindle speeds. The main blade can operate at speeds of up to 4800 rpm, while the scoring blade reaches 7500 rpm, ensuring smooth processing of laminated panels and delicate surfaces. With a maximum cutting height of 100 mm, the machine is capable of handling thicker materials, significantly expanding its range of applications. Standard Equipment Main motor 5.5 kW and scoring motor 1.1 kW Cutting unit with tilt and height adjustment Sliding table 3200 × 420 mm Crosscut fence and rip fence with precision adjustment Tilting upper blade guard Integrated dust extraction system with Ø100/80 mm outlets Blade angle and height indicators Complete technical documentation Technical Specifications Parameter Specification Main saw blade diameter / bore 350 / 30 mm Saw blade tilt range 0°–45° Main blade speed 2800 / 4000 / 4800 rpm Scoring blade diameter / bore 125 / 20 mm Scoring blade speed 7500 rpm Work table dimensions 945 × 720 mm Sliding table dimensions 3200 × 420 mm Maximum cutting height 100 mm Cutting width with rip fence 1250 mm Crosscut capacity with crosscut fence 3200 mm Dust extraction outlet under table Ø100 mm Dust extraction outlet on blade guard Ø80 mm Minimum air velocity 20 m/s Minimum air flow 565 m³/h Main motor power S1/S6 5.5 kW / 9 HP Scoring motor power S1/S6 1.1 kW / 1.8 HP Weight 850 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK MJ45-KB4 Sliding Table Saw The CORMAK MJ45-KB4 sliding table saw is a high-performance industrial woodworking machine designed for precise cutting of furniture boards, MDF, plywood, and other wood-based materials. Equipped with a scoring unit and a large 3200 mm sliding table, it ensures excellent edge quality without chipping or tearing. It is a reliable solution for furniture manufacturers, professional woodworking workshops, and industrial facilities requiring high productivity, precision, and repeatability. Main Advantages of the CORMAK MJ45-KB4 Precision scoring unit – eliminates chipping when cutting laminated boards and coated panels. Powerful 5.5 kW main motor – enables cutting of thick materials up to 105 mm. 3200 mm sliding table guided on hardened steel rods – ensures stability, smooth movement, and high cutting accuracy. Cutting angle adjustment from 0° to 45° – provides flexibility for various woodworking applications. Ergonomic and intuitive controls – quick access to essential machine functions improves workflow efficiency. Solid steel construction – guarantees durability, rigidity, and minimal vibration during operation. Construction and Technology – Component Quality Determines Performance The CORMAK MJ45-KB4 panel saw has been designed with a focus on durability, precision, and long-term industrial operation. The steel machine bed and reinforced frame increase structural rigidity, ensuring stable performance even during intensive production cycles. The linear guide system and ball bearings provide smooth and accurate movement of the sliding table, allowing precise positioning of workpieces. The scoring unit, equipped with a Ø125 mm blade rotating at 8000 rpm, performs a precise preliminary cut on the underside of the panel, preventing surface damage and eliminating chipping. The main Ø350 mm saw blade provides excellent cutting quality even at the maximum cutting height of 105 mm. Precision and Working Efficiency – Reliable Performance Every Day The main spindle speed range of 4000 / 6000 rpm allows the operator to select the optimal cutting speed depending on the processed material. The blade tilt adjustment from 0° to 45° enables accurate bevel cuts, while manual adjustment of the scoring blade allows quick setup without interrupting production. The machine is designed for companies that require: repeatable cutting results, high dimensional accuracy, reduced material waste, reliable operation in continuous production. Standard Equipment Crosscut fence Rip fence Ergonomic blade guard Table extension Mitre fence for angled cuts Dial blade tilt indicator operating manual EC declaration of conformity Technical Specifications Parameter Specification Work table dimensions 990 × 575 mm Sliding table length 3200 mm Cutting width with rip fence 1250 mm Crosscut capacity with crosscut fence 3100 mm Saw blade tilt range 0°–45° Main saw blade diameter Ø350 mm Bedpfotz Smijx Al Usdg Main saw blade bore Ø30 mm Maximum cutting height 0–105 mm Maximum cutting height at 45° 0–80 mm Main saw spindle speed 4000 / 6000 rpm Scoring blade diameter Ø125 mm Scoring blade bore Ø20 mm Scoring unit speed 8000 rpm Main motor power S1/S6 5.5 kW / 9 HP Scoring motor power S1/S6 0.75 kW / 1.2 HP Dust extraction outlet under table 100 mm Dust extraction outlet on blade guard 80 mm Machine weight 680 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Pneumatic Hold-Down for a Sliding Table Saw – Essential Equipment for Maximum Material Stability A pneumatic hold-down for a sliding table saw is an essential piece of equipment for facilities that require maximum stabilization of the material being cut. The two-section model with a length of 3,200 mm ensures secure and even pressure against the worktable, eliminating problems commonly associated with working without a hold-down – chipping, material waste, and inaccurate cuts. Key Advantages Bdedpfxevxtcqe Al Usg Pneumatic hold-down with two independent sections – each equipped with two cylinders, allowing flexible control of the pressure applied to different areas of the table. Extended 3,200 mm beam – provides full coverage of a typical sliding table saw table length and is ideal for processing large-format panels. Optimal working force at low pressure – effective operation from just 2.0 bar, resulting in lower energy consumption and simpler installation. Improved operator safety – securing the material reduces the risk of panel movement and uncontrolled shifting during cutting. Reduced material waste – stable positioning eliminates cutting errors and reduces the amount of waste. Higher edge quality – with no material vibration or movement, cuts are clean and free from burrs and fraying. Construction and Technology The hold-down beam is made of a durable steel profile, ensuring long service life and resistance to deformation. The pneumatic cylinders are arranged in two independent sections, providing even pressure along the entire length of the material being cut. The separation of the pressure zones makes it possible to adjust the clamping force to different panel sizes and thicknesses. The entire system is designed for quick installation on most sliding table saw worktables, making it easy to integrate into existing production lines without modifying the machine's structure. Precision and Work Efficiency Using a pneumatic hold-down on a sliding table saw directly improves cutting efficiency and dimensional repeatability. Even when cutting thin or laminated panels with finished surfaces, the operator can be confident that the material will remain securely in position. This has a direct impact on the quality and appearance of the finished component. Applications The two-section hold-down for sliding table saws is suitable for: furniture manufacturing facilities specializing in cutting laminated panels and MDF, production of structural components from wood and wood-based materials, precision applications where excellent cutting quality and defect-free edges are required, workstation automation, as a component supporting serial cutting processes. Standard Equipment 3,200 mm hold-down beam 4 pneumatic cylinders (2 per section) Set of connectors for connection to the pneumatic system Mounting brackets for installation on the worktable Optional Equipment Quick-release air connection module Additional safety valve Foot control system (pneumatic pedal) Integration with the saw's control panel Technical Specifications Parameter Specification Hold-down length 3,200 mm Maximum material height 100 mm Number of cylinders 4 Operating pressure 2.0 bar

Condition: new, Year of construction: 2026, CORMAK TS250 / 400V Table Saw The CORMAK TS250 / 400V is an industrial-grade table saw designed for high efficiency and reliability in professional woodworking shops, furniture manufacturing facilities, and craft workshops. Thanks to its three-phase power supply, stable construction, and robust technical parameters, the machine enables fast, accurate, and repeatable cutting of solid wood and wood-based materials. Main advantages of the machine 2.2 kW (S1) / 3.1 kW (S6) motor – provides high working power even during long-term operation under heavy loads. Large cutting depth – up to 80 mm at 90° – allows machining of thick wooden elements. Blade tilt adjustment from 90° to 45° – enables precise bevel and angled cuts. Sliding table with 1000 mm travel – ideal for processing large panels and workpieces. Blade speed of 4000 rpm – ensures clean and precise cuts without burning the material. 890 mm table height – provides an ergonomic and comfortable working position for the operator. 400V three-phase power supply – guarantees stable operation even during intensive use. Construction and technology The TS250 / 400V table saw is based on a rigid welded steel construction resistant to vibrations and dynamic loads. High-quality mechanical components and a reliable drive system allow efficient processing of hardwood, plywood, MDF, HDF, and composite materials. The blade height and tilt adjustment system operates smoothly and precisely thanks to screw-guided mechanisms. The solid parallel fence with an accurate adjustment system allows quick and safe positioning of the workpiece. The housing and working components have been designed for convenient operation and safe use. The table construction allows easy expansion of the working area, especially when combined with additional accessories. Precision and work efficiency The TS250 model offers a maximum cutting depth of 80 mm at 90° and 56 mm at 45°, making it a versatile solution for a wide range of woodworking applications. Thanks to the 400V power supply and optimized blade speed, the table saw provides industrial-level cutting quality and repeatability, both for individual production and serial manufacturing. Applications Bdsdpsvxhhbsfx Al Ujg The TS250 / 400V is an ideal solution for: Woodworking and furniture manufacturing companies – for cutting furniture carcasses, countertops, fronts, frames, and mouldings. Craft workshops – requiring a durable and accurate machine for processing wood and wood-based materials. Production of structural components – for machining boards, panels, and construction materials. Installation and assembly companies – for precise cutting of components directly at the workplace. Standard equipment Carbide-tipped saw blade 250 × 30 × 2 mm Parallel fence Sliding table Blade guard Blade height and angle adjustment system Optional equipment Dust extraction system with 100 mm connection port Format sliding table for large panels Additional saw blade sets Technical specifications Parameter Specification Maximum saw blade diameter / bore 254 mm Blade speed 4000 rpm Blade tilt range 90° – 45° Maximum cutting depth at 45° 56 mm Maximum cutting depth at 90° 80 mm Sliding table travel 1000 mm Cutting width on right side of blade 620 mm Table height 890 mm Motor power 2.2 kW (S1) / 3.1 kW (S6) Power supply 400 V Weight 125 kg Machine dimensions 1090 × 1330 × 910 mm

Condition: new, Year of construction: 2026, CORMAK TS315 Table Saw The CORMAK TS315 is a robust, efficient, and precise table saw designed for intensive use in professional woodworking and manufacturing facilities. Equipped with a 315 mm diameter saw blade and a rigid industrial-grade construction, this panel saw is ideal for cutting solid wood, MDF, HDF boards, as well as plastics with similar properties. The powerful motor and extensive working capabilities make the machine suitable for even the most demanding users. Main advantages of the machine 315 mm saw blade – enables cutting materials up to 100 mm thick at a 90° cutting angle. Powerful motor 2.8 kW (S1) / 3.3 kW (S6) – ensures stable operation even under maximum load. Blade speed of 4250 rpm – provides high-quality, smooth cutting results. Sliding format table 1600 × 238 mm – allows comfortable handling of large furniture panels and sheet materials. Stable industrial construction – reduces vibrations and improves machining accuracy. Multi-section table system – table extensions and widening elements increase the total working area. Precision rip fence – ensures repeatable dimensions during serial cutting operations. Design and technology The TS315 table saw has been developed as a professional woodworking saw, combining a heavy-duty structure with carefully designed ergonomics. The machine body is made of high-quality steel, providing maximum rigidity and resistance to deformation during intensive operation. The table system, including the main table, sliding format table, extensions, and widening sections, allows comfortable handling of large workpieces. This significantly improves workflow efficiency and increases operator safety. Smooth adjustment of cutting height and blade angle is carried out using precise handwheels, allowing quick setup according to the requirements of each task. All moving components are mounted on bearings, while the guide mechanisms ensure long-lasting and trouble-free operation. Bedpfx Alsvxhm Dj Uedg Precision and working efficiency Thanks to the large 315 mm blade diameter, the TS315 table saw can cut materials up to 100 mm thick while maintaining excellent accuracy. The blade speed of 4250 rpm guarantees clean, precise cuts without burning or tearing of the material. The sliding format table combined with precision guides enables accurate material positioning and perfect angle cutting, which is essential when processing furniture boards, cabinet fronts, and structural components. The CORMAK TS315 table saw is suitable for: Professional woodworking factories – for intensive daily production work. Furniture manufacturing – precise cutting of large MDF, HDF, plywood, and laminate panels. Craft workshops – as a versatile professional table saw. Specialized production facilities – for cutting PVC, ABS panels, and materials with similar density. Standard equipment Saw blade 315 × 30 × 3.2 mm Mitre gauge Parallel rip fence Sliding table Table extension and widening section Technical specifications Saw blade dimensions 315 × 30 × 3.2 mm Blade speed 4250 rpm Maximum cutting height at 90° / 45° 100 / 75 mm Maximum cutting width with rip fence 940 mm Main working table dimensions 800 × 365 mm Table extension 760 × 600 mm Table widening section 500 × 350 mm Sliding format table 1600 × 238 mm Dust extraction port diameter 100 mm Motor power S1/S6 2.8 kW / 3.3 kW Power supply 400 V Weight 245 kg Machine dimensions 1540 × 2400 × 1300 mm

Condition: new, Year of construction: 2026, CORMAK TS250CL Table Saw The TS250CL is a high-quality table saw designed for professional users who require reliability, precision, and a compact machine design. The saw combines advanced technical solutions found in higher-class models with an accessible and practical format. It is an excellent choice for small woodworking workshops, furniture production, and craft applications, providing high cutting efficiency and excellent machining quality. Main Advantages of the Machine Maximum blade diameter of 254 mm – enables deep cuts at various angles. 2.2 kW (S1) / 3.1 kW (S6) motor – provides constant power even during intensive operation. Blade tilt adjustment from 90° to 45° – allows precise bevel and angled cuts. Compact construction – allows optimal use of limited workshop space. Stable and extended work table up to 1000 mm in length – ensures accurate material guidance. Efficient dust extraction system with 100/25 mm outlets – improves cleanliness and operator comfort. Construction and Technology The TS250CL table saw is built on a robust welded frame that provides excellent rigidity and resistance to vibration. The main mechanical components are manufactured from high-quality steel and cast iron, ensuring durability and long service life. The heart of the machine is a powerful induction motor with a continuous operating power of 2.2 kW (S1), supported by an increased power mode of 3.1 kW (S6), allowing efficient cutting of hard wood species and wood-based materials. The installed 254 mm carbide-tipped saw blade enables effective cutting with a maximum depth of 80 mm at 90° and 65 mm at 45°, meeting the requirements of most woodworking operations. The blade speed of 4000 rpm ensures clean and accurate cutting lines. Precision and Working Efficiency The combination of a rigid construction and a precise blade guidance system allows the TS250CL table saw to deliver repeatable and accurate results. Thanks to the possibility of extending the work table to a length of 1000 mm, large workpieces can be guided comfortably and safely. Smooth adjustment of the cutting angle and height significantly improves operator convenience and increases daily production efficiency. Applications The CORMAK TS250CL table saw is an excellent solution for: Woodworking workshops – for cutting solid wood, MDF boards, plywood, and laminates. Furniture manufacturers – where dimensional accuracy and high surface quality are essential. Craft workshops – as a versatile and compact table saw for professional use. Individual users – looking for a professional machine for a home workshop. Standard Equipment Circular saw blade 250 × 30 × 2 mm Work table extension Dust extraction outlets 100/25 mm Stops and guards ensuring safe operation Optional Equipment Parallel guide system Crosscut sliding carriage for repetitive cutting Dedicated dust extraction system Technical Specifications Bdedpfsvxhi Esx Al Uog Parameter Specification Maximum blade diameter / bore 254 × 30 mm Blade speed 4000 rpm Blade tilt range 90°–45° Maximum cutting depth at 45° 65 mm Maximum cutting depth at 90° 80 mm Cutting width with table extension 750 mm Maximum cutting length 1000 mm Dust extraction outlet 100/25 mm Work table dimensions 635 × 420 mm Work table dimensions with extension 635 × 1500 mm Motor power 2.2 kW (S1) 400V / 3.1 kW (S6) Weight 110 kg Dimensions 1450 × 1000 × 1100 mm

Condition: new, Year of construction: 2026, CORMAK TS250CL Table Saw The TS250CL is a high-quality table saw designed for professional users who require reliability, precision, and a compact machine design. The saw combines advanced technical solutions found in higher-class models with an accessible and practical format. It is an excellent choice for small woodworking workshops, furniture production, and craft applications, providing high cutting efficiency for various wood materials. Main advantages of the machine Maximum blade diameter of 254 mm – enables deep and precise cuts at different cutting angles. 2.2 kW (S1) / 3.1 kW (S6) motor – provides stable power output even during intensive operation. Blade tilting range from 90° to 45° – allows accurate bevel cutting. Compact construction – ensures efficient use of limited workshop space. Stable and expandable work table up to 1000 mm in length – provides precise material guidance. Efficient dust extraction system with 100/25 mm ports – improves cleanliness and operator comfort. Design and technology The TS250CL table saw is built on a solid welded frame that provides excellent rigidity and vibration resistance. The main mechanical components are manufactured from high-quality steel and cast iron, ensuring long service life and reliable operation. The machine is powered by an induction motor with 2.2 kW continuous power rating (S1), with an increased output of 3.1 kW in S6 mode. This allows efficient cutting of hardwood and wood-based materials. The 254 mm carbide-tipped saw blade provides effective cutting with a maximum depth of 80 mm at 90° and 65 mm at 45°, meeting the requirements of most woodworking applications. The blade speed of 4000 rpm ensures clean, accurate cutting lines and high-quality finished surfaces. Precision and working efficiency The rigid construction combined with precise blade guidance allows the TS250CL table saw to deliver repeatable and accurate results. The possibility of extending the work table up to 1000 mm makes handling larger workpieces easier and more comfortable. Smooth adjustment of the cutting angle and height significantly improves daily operation, allowing the user to quickly adapt the machine settings to different production requirements. Applications The TS250CL table saw is an ideal solution for: Woodworking workshops – for cutting solid wood, MDF boards, plywood, and laminates. Furniture manufacturers – where dimensional accuracy and high-quality surfaces are essential. Craft workshops – as a versatile and compact professional table saw. Individual users – looking for a reliable machine for a professional home workshop. Standard equipment Circular saw blade 250 × 30 × 2 mm Work table extension Dust extraction ports 100/25 mm Safety guards and limit stops Optional equipment Parallel guide system Cross-cut sliding carriage for repetitive cuts Dedicated dust extraction system Technical specifications Parameter Specification Maximum blade diameter / bore 254 × 30 mm Blade speed 4000 rpm Blade tilt range 90°–45° Maximum cutting depth at 45° 65 mm Maximum cutting depth at 90° 80 mm Cutting width with table extension 750 mm Maximum cutting length 1000 mm Bsdevxhkiepfx Al Usdg Dust extraction port 100/25 mm Working table dimensions 635 × 420 mm Working table dimensions with extension 635 × 1500 mm Motor power 2.2 kW (S1) 230V / 3.1 kW (S6) Weight 110 kg Machine dimensions 1450 × 1000 × 1100 mm

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK MM3166P 400V Drum Roller Sander is an advanced through-feed sanding machine designed for precise sanding of solid wood, MDF boards, veneer, and other woodworking materials. Equipped with two sanding drums and a 635 mm working width, this model is an excellent solution for serial production and facilities requiring high-quality surface finishing. Main advantages of the machine Two sanding drums with a diameter of 150 mm ensure uniform sanding without the risk of burns or scratches. Conveyor belt system provides smooth transport of the workpiece and stable guidance under the sanding unit. Adjustable feed speed from 1.8–7.3 m/min allows the operator to adapt the working speed to the type of processed material. Dust extraction system with two Ø100 mm ports ensures efficient removal of chips and dust, improving working comfort and extending the service life of components. Solid industrial construction weighing 220 kg provides excellent stability even during intensive operation. Construction and technology The CORMAK MM3166P has been designed with stability, precision, and durability in mind. The main steel frame provides resistance to vibration and deformation. The 2.2 kW main motor drives the sanding rollers at 1800 rpm, enabling efficient removal of excess material, even when processing hard wood species. The 120 W feed motor works together with the adjustable speed control system, allowing the operator to precisely control the sanding process. The large belt width of 635 mm makes it possible to process wide components in a single pass, reducing operating time. Precision and working efficiency The machine provides accurate control of the workpiece thickness in the range of 7 to 130 mm. The sanding belt speed of 14 m/s ensures a high-quality surface finish without overheating or burning the material. The roller diameter and working roller length (635 mm) provide even contact pressure and a consistent final sanding effect. Applications Bdodoxfhh Dspfx Al Ueg The CORMAK MM3166P drum roller sander is widely used in: woodworking plants producing stairs, doors, and furniture fronts, factories manufacturing wooden components and panel materials, workshops specializing in wood and veneer restoration, solid wood and veneered furniture production facilities, production of large-area components where repeatability and sanding quality are essential. Standard equipment Two sanding rollers Ø150 mm Conveyor belt with a width of 635 mm Main motor 2.2 kW Feed motor 120 W Dust extraction system with Ø100 mm ports Adjustable table height control Optional equipment Sanding belts with different grit sizes Dust and chip extraction system Mobile base Technical specifications Parameter Value Belt length 800 mm Belt width 635 mm Radius [R] 120 Maximum material thickness 130 mm Main motor power 2.2 kW Voltage 400 V Frequency 50 Hz Speed 1800 rpm Feed motor power 120 W Feed speed 1.8–7.3 m/min Dust extraction port diameter 100 mm Weight (net/gross) 220 / 260 kg Machine height 1113 mm Machine width (side view) 1100 mm Machine width (top view) 1060 mm Roller length 635 mm

Condition: new, functionality: fully functional, Year of construction: 2026, color: other, overall weight: 12,000 kg, loading space width: 4,200 mm, loading space length: 13,000 mm, loading space height: 3,000 mm, Equipment: cooling unit, General Data: Model: Premium Mobile Home Type: Complete Container Solution External Dimensions: 13.0 m x 4.2 m (approx. 54.6 m²) Price Overview: Base Version: 83,000 EUR gross / 67,500 EUR net Full Equipment: 93,000 EUR gross / 75,500 EUR net VAT: plus 19% Technical Design: Dimensions & Weight: Weight: approx. 12 tons External Height: approx. 275 cm Internal Height: approx. 225 cm A major advantage of this model is the high-quality insulation with 180 mm PU foam, making the house ideally suited for year-round use. The floor structure consists of a sturdy steel frame, a waterproof plywood panel, PU foam insulation, a wooden sub-structure, an OSB panel, and a high-quality vinyl floor. The roof structure comprises a combination of steel and wood, PU foam insulation, a vapor-permeable membrane, an OSB panel, and a durable aluminum roofing system. The interior of the roof is clad in wood, and a modern Fibo system is used in the bathroom. The walls consist of an external steel and wood structure with OSB, PU insulation, and wind and moisture protection. Inside, MDF cladding and additional sound insulation ensure a comfortable living environment. This is complemented by modern decorative elements. The facade is based on an aluminum facade system and is additionally coated with a high-quality vinyl coating (PVC). This provides a modern look in wood, stone or concrete appearance and is also easy to maintain, weather-resistant and durable. Windows & Doors: Of particular note is the large window front, approximately 3 meters wide, on the short side of the house, which provides plenty of daylight and significantly enhances the appearance of the living area. This is complemented by floor-to-ceiling glazing and further windows along the long side according to the floor plan. The entrance door is made of aluminum/glass with triple glazing, and the interior doors are made of PVC. Room Layout: The house features an open-plan living and dining area with a kitchen and direct access to the large glass front. In addition, there is a bedroom with a double bed and wardrobe, a guest room with single beds, and a bathroom with a shower, toilet, and sink. Equipment: Bdsdpfjzlq Tvjx Al Uog The mobile home is delivered fully furnished according to the drawings. This includes, among other things, a fitted kitchen with all essential appliances, a dining table with chairs, a living area with a sofa and TV area, a double bed in the bedroom, and single beds in the guest room. Storage solutions are also integrated. Technology: The house is equipped with an air conditioning system (heating and cooling), a 3-phase electrical installation, and modern LED lighting in the interior and exterior. Additional Information: Delivery is turnkey, including furniture. Transport costs are calculated individually. On-site installation is not included in the price. Modifications are possible at any time. The offer is valid for 30 days. If you have any questions or would like to request changes, please do not hesitate to contact us. We look forward to hearing from you. Sebastian Witka Omega Container

Condition: new, functionality: fully functional, Year of construction: 2026, The CORMAK FM300S Dust Collector is a high-performance dust extraction system designed for intensive operation in woodworking shops, furniture manufacturing facilities, and the timber industry. Equipped with a 2.2 kW motor, large-capacity collection bags, and an extraction capacity of up to 3,900 m³/h, this industrial sawdust collector provides efficient and safe dust removal even in demanding production environments. Key Features 2.2 kW / 400 V motor – designed for continuous industrial operation. Airflow capacity of 3,900 m³/h – efficiently extracts sawdust and wood chips from multiple workstations simultaneously. WhirlWind multi-blade metal impeller – dynamically balanced to ensure quiet, stable, and vibration-free operation. Reinforced steel construction with additional supports – provides excellent durability and structural rigidity. Quick-release bag mounting system – enables convenient operation and fast bag replacement without tools. Mobile base with bearing-mounted wheels – allows easy movement around production halls and workshops. Highly sealed extraction system – four flexible sealing elements at critical points minimize air leakage and maintain suction efficiency. Construction and Technology The CORMAK FM300S woodworking dust collector is equipped with a WhirlWind series metal impeller, precisely balanced and designed for intensive industrial use. The entire structure has been reinforced with additional supports and brackets capable of handling the weight of fully loaded collection bags. The housing is manufactured from thick steel resistant to deformation, while specially designed sealing elements improve system tightness by reducing vacuum losses and increasing overall extraction efficiency. Performance and Efficiency The FM300S delivers excellent extraction performance when operating with multiple machines simultaneously. The system allows connection through: 1 × Ø150 mm extraction inlet, or 3 × Ø100 mm extraction inlets The large filtration surface and four high-capacity bags (2 filter bags and 2 waste collection bags) enable long periods of maintenance-free operation with minimal downtime. This powerful sawdust extraction system is designed to meet the requirements of demanding professional users. Applications The CORMAK FM300S is ideal for: Furniture manufacturing plants and professional woodworking shops – as a central chip extraction system for multiple machines. Industrial workshops processing wood, MDF, plywood, and other wood-based materials. Production lines requiring reliable dust extraction as part of automated processes. Technical schools and training centres – providing an efficient and safe solution for educational workshops. Standard Equipment 2 fabric filter bags 2 plastic waste collection bags Metal mobile base with bearing-mounted wheels Optional Equipment Galvanized hose clamps High-efficiency filter cartridge with filtration down to 2 microns Technical Specifications Specification Value Airflow capacity 3,900 m³/h Maximum vacuum pressure 1,750 Pa Noise level 75 dB Collection bag capacity 150 L Number of bags 2 × fabric (filtering), 2 × plastic (waste collection) Extraction inlet 1 × Ø150 mm or 3 × Ø100 mm Overall dimensions (L × W × H) 1,400 × 570 × 1,960 mm Bsdpfx Alovu Artj Ujdg Weight 64 kg Motor power 2.2 kW Power supply 3-phase, 400 V Operating manual (DTR) CE Declaration of Conformity Yes

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK DC2200 Model The CORMAK DC2200 is a powerful and robust cyclone dust extractor, designed to efficiently purify the air in woodworking shops, furniture factories, and metalworking facilities. Thanks to its cyclone separator, high-performance radial fan, and modern filtration system, the machine ensures effective particle separation and long-term high efficiency. Bdsdpfx Asxrdhael Usg Main Advantages of the CORMAK DC2200 High extraction capacity – up to 2800 m³/h – effective removal of dust and shavings from multiple workstations simultaneously Cyclone separator – separates larger particles before the filter, extending its service life Powerful 2.2 kW (2200 W / 50 Hz) motor – stable and reliable continuous operation Large 151-liter metal container – convenient and safe waste collection Filtration area of 4.8 m² – ensures high efficiency in capturing fine dust particles Compact, mobile design – sturdy frame with transport wheels for easy movement Quiet operation – optimized fan design reduces noise without sacrificing performance Design and Technology The CORMAK DC2200 is equipped with a 365 mm radial fan, generating a maximum static pressure of 2220 Pa. This allows efficient air suction through long ducting systems and multiple workstations. The extractor offers three suction inlets (3 × Ø100 mm) and one main inlet (Ø200 mm) for flexible setup according to the production area layout. The cyclone separation system effectively removes heavier particles at the inlet, directing only pre-cleaned air to the container. The cylindrical filter (Ø370 × 612 mm) ensures consistent airflow even during intensive operation. Performance and Ergonomics The DC2200 extractor is designed for daily use in small and medium-sized workshops. The 151-liter container (Ø620 × 570 mm) provides long working cycles without frequent emptying. With its compact dimensions (1320 × 900 × 1840 mm) and lightweight design (136 kg net), the unit fits easily into any workspace. Applications The CORMAK DC2200 is ideal for use in: Carpentry and furniture workshops Sawmills and wood-processing facilities Model-making and metalworking shops Production of composite and MDF components Standard Equipment Cyclone separator Cylindrical filter with large filtration surface 151 L metal container for dust and shavings Transport wheels Suction inlets: Ø200 mm and 3 × Ø100 mm Technical Specifications Parameter Specification Motor power 2.2 kW / 50 Hz Airflow (without filter) 3900 m³/h Max. static pressure 2220 Pa Fan diameter 365 mm Inlet diameter 1 × Ø200 mm / 3 × Ø100 mm Container volume 151 L Container dimensions Ø620 × 570 mm Filter surface area 4.8 m² Filter dimensions Ø370 × 612 mm Overall dimensions (L × W × H) 1320 × 900 × 1840 mm Weight (net / gross) 136 / 170 kg

Condition: new, Year of construction: 2026, CORMAK FAN5500 Material Handling Fan – High-Capacity Industrial Blower for Sawdust and Dust Extraction The CORMAK FAN5500 is a high-performance centrifugal material handling fan engineered for intensive industrial extraction of sawdust, wood chips, dust, and other dry particulate materials. Powered by a 5.5 kW three-phase motor and equipped with a high-efficiency centrifugal impeller, the FAN5500 delivers an impressive airflow of up to 8,000 m³/h, making it an ideal solution for woodworking factories, furniture production facilities, and centralized dust collection systems. Key Advantages Airflow up to 8,000 m³/h – ideal for multi-machine installations and production lines Powerful 5.5 kW motor – ensures reliable performance under continuous heavy-duty operation Large connection ports – Ø300 mm inlet and Ø250 mm outlet for compatibility with various extraction systems Compact yet robust construction – excellent vibration resistance and long service life 400 V three-phase power supply – designed for industrial installations Construction and Technology The FAN5500 features a high-efficiency centrifugal impeller driven directly by a powerful electric motor, minimizing power losses while maximizing airflow. Its heavy-gauge steel housing is powder-coated for superior resistance to corrosion, abrasion, and mechanical damage. The aerodynamic design optimizes air movement while reducing energy consumption. Despite its high performance, the compact footprint allows easy installation where space is limited. Performance and Efficiency The CORMAK FAN5500 efficiently extracts large volumes of sawdust and airborne particles from multiple workstations simultaneously. Maintaining continuous high airflow helps prevent duct blockages, extends the service life of machinery and filtration systems, and significantly improves workplace cleanliness. Effective dust extraction also enhances operator safety by reducing airborne dust concentration and minimizing fire hazards. Applications The FAN5500 is ideally suited for: Woodworking and furniture manufacturing facilities Workshops processing solid wood, MDF, plywood, and engineered wood products Centralized industrial dust collection systems CNC routers, panel saws, spindle moulders, planers, and sanding machines Pneumatic conveying systems for dry wood waste Standard Equipment 5.5 kW / 400 V three-phase electric motor Heavy-duty steel centrifugal impeller Powder-coated steel housing Ø300 mm inlet connection Ø250 mm outlet connection Heavy-duty support frame Optional Equipment Wear-resistant flexible extraction hoses Cyclone separators Automatic start/stop control systems Extraction arms, adapters, and duct reducers Technical Specifications Parameter Value Maximum Airflow 8,000 m³/h Inlet Diameter 300 mm Outlet Diameter 250 mm Bsdpfsvughlex Al Uedg Motor Speed 2850 rpm Motor Power 5.5 kW Power Supply 400 V Dimensions (L × W × H) 670 × 600 × 600 mm Weight 55 kg