Used Maka for sale (49)

Condition: repair required (used), Year of construction: 2014, operating hours: 23,000 h, functionality: not functional, machine/vehicle number: 21066714, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 20,000 rpm, controller model: Siemens Sinumerik 840D sl, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,000 mm Travel Z-axis: 600 mm Spindle speed: 20,000 rpm Rapid traverse X/Y-axis: 60 m/min Rapid traverse Z-axis: 45 m/min Tool holder: HSK-63F Clamping table dimensions: 2,000 x 1,000 mm MACHINE DETAILS Control model: Siemens Sinumerik 840D sl Operating hours: 23,000 h Itsdpfx Asyq Ra Uobvod EQUIPMENT Swiveling spindle External cooling unit (manufacturer: Pfannenberg) Note: There is a fault in the control system. It does not respond to any inputs. Repair by Siemens Service is required!

Condition: ready for operation (used), Year of construction: 2008, operating hours: 53,216 h, functionality: fully functional, machine/vehicle number: 22024211, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,000 mm Travel Z-axis: 600 mm Spindle speed: 20,000 rpm Rapid traverse X/Y-axis: 60 m/min Rapid traverse Z-axis: 45 m/min Tool holder: HSK-63F Clamping table dimensions: 2,000 x 1,000 mm MACHINE DETAILS Control model: BWO CNC Itjdpfxsyq Nx Ns Abvod Operating hours: 53,216 h EQUIPMENT 5 compact clamps (Model: Kopal Duo) Custom machine enclosure Swiveling spindle External chiller (Manufacturer: Pfannenberg, cooling capacity: 1.7 kW)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 73,695 h, functionality: fully functional, machine/vehicle number: 22021508, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 20,000 rpm, controller model: BWO RC, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,000 mm Travel Z-axis: 600 mm Itjdpfx Aoyq Nx Aebved Spindle speed: 20,000 rpm Rapid traverse speed X/Y-axis: 60 m/min Rapid traverse speed Z-axis: 45 m/min Tool holder: HSK-63F Clamping table dimensions: 2,000 x 1,000 mm MACHINE DETAILS Control unit: BWO RC Operating hours: 73,695 h EQUIPMENT Swiveling spindle Coolant system (MMS) External chiller unit (Manufacturer: Maka) New ball screw for Z-axis, installed by Maka Service in 2024

Condition: used, Year of construction: 2008, machine/vehicle number: 26010808, functionality: fully functional, Used machine Year of manufacture: 2008 Condition: Currently still in production Equipment and Technical Data: CNC Control: Siemens 840 D Maximum travel paths of controlled axes: X = 1800 mm Y = 6590 mm Z = 460 mm A = ± 90 degrees C = ± 270 degrees HSD milling unit with 10 kW, liquid-cooled Ijdpfx Asyr Nwnobvetd Continuously variable spindle speed up to 24,000 rpm Lifetime grease lubrication Tool holder HSK 63F 1 multi-spindle drilling unit with pneumatic advance, mounted on the milling unit 16 individually selectable vertical drilling spindles 1 horizontal double drilling spindle in X direction and 1 x the same in Y direction Drill holders each 10 mm diameter Note: Workpieces machined with the drilling unit = 900 mm using X/Y reference spindle Milling unit and drilling unit with 200 mm extraction connections, each equipped with pneumatic shut-off valve, joint connection to customer-side extraction system, diameter 300 mm Tool changer: 1 drum-type tool magazine for 5-axis milling unit, 20 positions for tool diameter 90 mm resp. max. 160 mm with sorted placement, maximum tool length 160 mm One saw blade up to max. 300 mm diameter can be stored and changed; this occupies 3 storage positions Special tool lengths up to max. 180 mm possible with corresponding restriction of working area Maximum tool weight 6 kg (including HSK holder) Total magazine weight approx. 60 kg Magazine positioned at the unit output position Machine table: 8 support beams, manually adjustable along the machine length, each beam with 1 lowerable workpiece stop, fixed facing the operator Table area can be split into two clamping zones, per station: - 1 length stop, pneumatically raisable and lowerable - 2 pneumatically raisable and lowerable sliding rails - 1 vacuum circuit Workpiece positioning: 1 Maka laser system Workpiece clamping: 1 vacuum pump 128 m³/h, dry-running, with 250-liter buffer tank 16 vacuum suction cups, 110 mm diameter Vacuum cup kit for stair production incl. touch valve 1 clamping fixture for posts/curved parts Including chip conveyor Including NC-Hops 5, Wop system Including bumper safety device at the front and fencing on the sides and at the rear Central lubrication Rated power: 21 kW Fuse: 63 A Availability: approx. March 2026 Location: Westerwald

Condition: ready for operation (used), Year of construction: 1999, number of axes: 5, This 5-axis MAKA FPM 470 CNC Wood Machining Centre was manufactured in 1999. Ideal for complex woodworking projects, it offers precision and versatility. If you are looking to get high-quality milling capabilities, consider the MAKA FPM 470 machine we have for sale. Contact us for more information about this machine. Additional equipment • Energy Chains: Various models Machine Benefits Technical Machine Benefits • Universal 2-axis module • 5-axis cnc machining center • A-axis rotation: 540° • B-axis swivel: ±100° (200° total) • Z-axis travel: increased from 350mm to 700mm • Harmonie drive upgrade for a and b axis • Pre-configured measuring system cables • Robot cable assembly and guide carriages Extra Information Control Unit Upgraded Control Interface Supports 32 axes and 8 channels 256MB NC Memory Dual-Core Processor Ethernet RJ45 (1 Gbit/s) No buffer battery needed Controller Upgraded from previous model to new unit Machine-Specific Data New Z-Axis Components: Ball screw drive Ijdpfx Abex D Ebxsvotd Gear rack Bearings Guide rails and carriages Energy chain

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,740 mm, travel distance Z-axis: 1,050 mm, total height: 3,400 mm, overall weight: 7,000 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 10,000 W, tool weight: 3,000 g, number of axes: 5, This 5-axis MAKA MK 7s was manufactured in 2007. It features a robust 7000 kg frame, operates on 400V/50Hz, and has a rated power of 18.5 kW. The machine includes a BWO 910 RC control system and a versatile HSK 63F milling spindle. Its linear tool magazine holds tools and saw blades, complemented by an aluminum surface table measuring 2000 x 1000 mm. Consider the opportunity to buy this MAKA MK 7s horizontal machining centre. Contact us for more information. • A-axis: +- 100 degrees • C-axis: +- 270 degrees • Verfahrwege: X-2900 mm / Y-1740 mm / Z-1050 mm / A +- 100 Grad / C +- 270Grad. • Table size: 2000 x 1000 mm • Adapter aluminum plates: 1200 x 980 mm, 40 x 40 mm grid, m12 thread • Tool cooling: minimum quantity lubrication • Tool magazine: linear tool magazine with 5 pockets for tools up to 60 mm in diameter and max. 130 mm in length • Saw blade pocket: 1 pocket for saw blades up to 175 mm in diameter • The last series was processed using aluminum rating voltage: 400V / 50 Hz Rated current: 50 A Rated power: 18.5 kW Operating pressure: 6 bar Pneumatic pressure: 6 bar Additional equipment • Maka protective enclosure, open at the top and with two manually opening doors at the front Dimensions Machine Depth 6000 mm Itjdpfxox D Dlcj Abvod

Condition: good (used), Net price: €2,850 MAKA surface planer with Centrofix cutter block and 4kW motor! - Tables adjusted Itjdpfxeyvh Alj Abved - Newly degreased - New Centrofix planer knives (quick-change system) - 4kW motor - Control panel on top You will receive an invoice with VAT shown separately. Delivery by freight forwarder possible. Price ex stock Haldensleben.

Condition: used, Year of construction: 1992, with Centrofix cutterhead Used, good condition, low operating hours Manufacturer: Maka Model: AH 430 Year of manufacture: 1992 Machine no.: 9201531 GS-tested for wood dust Motor: 3.0 kW Control panel on top Planing width: approx. 430 mm Infeed table length: approx. 1500 mm Outfeed table length: approx. 1200 mm Pendulum guard Table lips slotted/low-noise Itjdpfx Aexuv Rrsbved Number of knives: 4 pcs Centrofix cutter block Table adjustment via handwheel automatic brake Extraction connection: D 140 mm Required space: approx. 2700 mm x 1200 mm x 1400 mm Weight: approx. 800 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery as is, as inspected, without any warranty or guarantee

Condition: good (used), Year of construction: 1994, functionality: fully functional, Forward/reverse operation, 3–1,000 rpm, brake motor with Haffner 3-roller feed, 8 speeds, good condition. Transport available at additional cost! Isdpfx Aeybv A Ajbvstd

Condition: used, Year of construction: 1999, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.5 kW Itodpfxjv S Diuj Abvsd Speed: 2800 rpm Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 250 kg

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 with many mortising tools, see pictures Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Pneumatic workpiece clamping on the side 1 piece Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. Itedpov Hm Nmjfx Abvsd (We will only answer inquiries if you provide your address + telephone number!)

Condition: excellent (used), Catalogue number 7266 TECHNICAL DATA - Shaft width: 530mm - 4-knife shaft - Noise-reducing comb - Shaft guard - Table length: 2900mm - Longer infeed table: 1655mm - Cast iron tables - Both tables adjustable - Original adjustable cast iron fence - Brake - Extraction port diameter: 140mm - Motor: 4kW - Dimensions (L/W/H): 2900x1000x1210mm - Weight: 695kg ADVANTAGES – German-made – 4-knife shaft – Brake – Noise-reducing comb – Longer infeed table Iodjx Symbopfx Abvetd – Unpainted – Used jointer, in very good condition Original photos Start-up video of the machine: youtube.com/watch?v=v_3ECkLDWVI Net price: 18,900 PLN Net price: 4,500 EUR (depending on exchange rate 4.2 EUR) (Prices may change with greater fluctuations)

Condition: used, Year of construction: 1973, Storage location: Nattheim Itjdpfx Abjvvkt Uevjd

Condition: excellent (used), Number of agregats 1 St. Iodpfx Ajyi Hufjbvstd Lock depth max. ca. 130 mm connected load 2,5 kW vertical movement 100 mm

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Equipment and technical data: - Fixed milling spindle; newly fitted bearings Iedjw I Uinepfx Abvetd - with table extension and extendable frame support 2500 mm - Motor 5.5 kW - Speeds 3000/4500/6000/8000/10000 rpm - Milling fence with 2 adjustment options: - complete fence - rear take-off jaws - Extraction hoods: 2 x 120 mm - Automatic motor brake - Right/left rotation - with Haffner power feed with 4 rollers Weight approx. 700 kg Availability: by arrangement Location: Flörsheim

Condition: used, Three-phase motor, electric motor, Maka milling motor -Power: 1.3 kW -Speed: 2800 rpm -Shaft: Ø 18 x 40 mm Itedpfx Abjdwhuqovod -Construction with: dovetail guide -Dimensions: 330/135/H195 mm -Weight: 15.7 kg

Year of construction: 2005, condition: ready for operation (used), A Maka CNC 4-axis milling and drilling machine for plastic, wood and aluminum is available. Travel X/Y/Z: 2000mm/6000mm/250mm, C-axis: 360°, rapid traverse X/Y/Z: 45m/min/45m/min/24m/min, spindle mount: HSK63, spindle power: 12kW, spindle speed: 24000rpm. Tool places: 12, angle head places: 3, machine dimensions X/Y/Z: 12000mm/5700mm/3200mm, control: BWO 920, documentation available. On-site inspection is possible. Itjdpfxjvmq Tvj Abved

Year of construction: 2000, condition: ready for operation (used), Max. cutting height: 100mm, saw blade diameter: 250-400mm, bore: 30mm, carriage length: 2600mm, motor power: 5.5kW, length: 3100mm, width: 2400mm, height: 1500mm, weight: 770kg. On-site inspection is possible. Itedpfxeurwyve Abved

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 12100mm/2350mm/800mm, swivel A-axis: +/-98°, rapid traverse X/Y/Z/A: 45/45/24/10 m/min, processing length: 11000mm, speed: 24000 rpm, table: 10 support crossbars, 2 hydraulically swiveling workpiece stops, control: BWO 930, operating hours: 23792h, dimensions X/Y: 18300mm/6250mm. Including moving gantry version with Gentry drive on both sides, coolant spraying system with minimum quantity fine atomization. Documentation available. Itjdpfx Abotqfqxevsd

Condition: reconditioned (used), Year of construction: 1998, machine/vehicle number: M000039046, drilling depth: 180 mm, height adjustment type: mechanical, table width: 315 mm, table length: 565 mm, drill chuck size: 20 mm, overall weight: 260 kg, rotational speed (max.): 2,840 rpm, power: 1.5 kW (2.04 HP), working height: 850 mm, MAKA Slot Mortising Machine LB-1 Sturdy, heavy cast iron work tables and supports, combined with a large machine base, ensure flawless and smooth operation. Height and depth adjustments are monitored via graduated scales, while the ultra-smooth single-lever adjustment on ball guides allows for fatigue-free working. Technical data: Table size: 565 x 315 mm Work table height: 850 mm Longitudinal travel of drill head: 240 mm Max. drilling depth: 180 mm Vertical adjustment of drill head: 140/160 mm Two-jaw drill chuck: 0-20 mm Spindle speed: 2,850 rpm Motor power: 1.5 kW Extraction nozzle diameter: 90 mm Net weight: 60 kg Sound level according to DIN 45635/1600: 66.9 dB The machine is in excellent technical and visual condition and has been inspected in our workshop. It features a dowel hole drilling device for 16-22-25-32 mm and a precision mitre stop 45°- 0 -45°. Shipping available at additional cost. We only ship within the EU. No shipping outside the EU. Iodpjyc Rz Aofx Abvotd

Condition: ready for operation (used), Year of construction: 1999, Two Maka Machines: Year: 1999 · Machine No: 422 799 Key specifications Model: MAKA KPF 334R Control: BWO 900C CNC (integrated PC, ~1 MB memory) Working area: X = 1,000 mm, Y = 1,000 mm, Z = 300 mm (fixture height ~120 mm) A/B axes: A = 540°, B = ±100° (200° total) Rapid traverse: X/Y = 45 m/min, Z = 15 m/min, A/B = 10,000°/min Spindle: HSD high-speed spindle — 6.8 kW, 2,000–24,000 rpm, ceramic bearings, air-cooled (nominal power from 12,000 rpm) Tooling: SK30 spindle taper; 10-place drum tool magazine (tools up to Ø60 mm, length ≈130 mm depending on diameter) Table: Aluminium work table ~1,000 × 1,000 mm (T-slots / grid) Vacuum: Vacuum clamping system (vacuum pump spec commonly listed as ~54 m³/h on similar units) Lube: Central automatic lubrication system Electrical: 400 V, 50 Hz (verify on site) MAKA KPF 334 RT – 5-Axis CNC Machining Centre Year: 1999 · Machine No: 422 799 Key Specifications – MAKA KPF 334 RT Itjdoxwux Tspfx Abvjd Working travel: X ≈ 2,750 mm · Y ≈ 2,400 mm · Z ≈ 700 mm A-axis rotation: ~540° · B-axis swivel: ~200° Rapid traverse: X/Y ~40 m/min · Z ~15 m/min · A/B ~10,000°/min Dual work tables: ~1,000 × 1,000 mm each (coupleable) Control system: BWO 900 / BWO 900C CNC Spindle: High-speed milling spindle (eg ~27,000 rpm capacity) Tool magazine: Multi-station drum (tools up to Ø60 mm / L approx 130 mm, check actual) Vacuum clamping system & automatic central lubrication Electric: 400 V / 50 Hz (buyer to verify local connection)

Condition: used, Feed unit MAKA -used- infinitely variable feed speed Iodpfou R S R Ujx Abvjtd ----- Technical data ----- Rollers: 3 pieces

Condition: used, Year of construction: 1986, comb. with handle olive drilling unitused, great condition, little usedMake MakaType STV-71-BYear of construction 1986Machine no. 864653pneumatic workpiece clamping laterally 1 piecepneumatic workpiece clamping from above 2 piecesRequired space approx. 1350 mm x 1200 x 1200 mmWeight approx. 1000 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seenwithout guarantee and guarantee Itsdpfx Absvwfz Noved

Condition: used, used, top equipmentincluding setting gaugeMake MakaType STV-71Column machinewith caulking tools see picturesWorkpiece stop 2 piecesStop rail right / left 2150 mmWorkpiece blow-out 2xFoot switch2-hand safety circuitpneumatic workpiece clamping at the side 1 piecepneumatic workpiece clamping from above 2 piecesExtraction connection D 120 mmSpace requirement approx. 1200 mm x 800 mm x 1500 mmStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without overhaul,without guarantee and warranty Itjdpfx Ajvwf I Njbvod

Condition: ready for operation (used), Year of construction: 1990, machine/vehicle number: 8905829, power: 3 kW (4.08 HP), input voltage: 380 V, planing width: 430 mm, total width: 600 mm, total height: 1,200 mm, table length: 2,750 mm, Planing width: max. 430mm, table length 2750mm 4-blade shaft with reversible blade, toothed table lips Chip thickness adjustment via handwheel with magnifying glass display Itedpeuivw Tsfx Abvsd Motor: 3kW, 380V Condition and details see pictures