Used Melamine Press for sale (12,253)

Condition: used, Year of construction: 2015, functionality: fully functional, pressing force: 54 t, bale length: 1,200 mm, bale width: 800 mm, bale height: 1,100 mm, bale weight: 400 kg, total width: 2,150 mm, total height: 2,160 mm, total length: 1,700 mm, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Strautmann AutoLoadBaler baling press – Year of manufacture: 2015 Used automatic Strautmann AutoLoadBaler baling press for efficient compression of cardboard and other suitable recyclable materials. Technical data: Manufacturer: Strautmann Model: AutoLoadBaler Year of manufacture: 2015 Pressing force: 530 kN (approx. 54 tons) Lrjdpfx Ahjz Huhkj Ssu Motor power: 4 kW Power supply: 3 x 400 V / 50 Hz Bale dimensions: approx. 1,200 x 800 x 1,100 mm Bale weight: approx. 400 kg, depending on the material External dimensions: approx. 1,700 x 2,150 x 2,160 mm (L x W x H) The AutoLoadBaler enables comfortable and efficient compression of recyclable materials and significantly reduces the volume of material. For transport, the machine can be partially disassembled. The hydraulic ram must then be professionally reassembled. Inspection possible by arrangement. All information without guarantee. Subject to prior sale.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Baling press Presona LP 85 VH2, year of manufacture 2018 Technical data: Manufacturer Presona Sweden Type LP 85 VH2 Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Effective operating hours approx. 22,000 Pre-compression force 28 t Main compression force 85 t Infeed chute 1500 x 1100 mm Lodoz H I E Aopfx Ah Soru Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volume output: 1200 cbm/h Throughput at 30-100 kg/cbm: 13-30 t/h Tying 5-strand vertical, (3-strand horizontal) Oil tank volume 2000 L Transport dimensions press 10400 x 2400 x 2800 mm (L x W x H) Weight approx. 27,000 kg Materials: Paper, cardboard, PET bottles, films, light waste. Note: The press is in good condition. It was dismantled from ongoing operation. The horizontal tying is currently not functioning. The technical documentation is available. The following work has been carried out by us: New wear plates (Hardox) in the press channel Seals completely replaced on the main cylinder Oil filter changed Vertical tying system overhauled and made operational. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made with advance payment, ex works, without warranty. Our payment terms are 100% advance payment.

Condition: good (used), Year of construction: 2005, stroke length: 1,000 mm, throat depth: 400 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, overall weight: 9,650 kg, total length: 5,700 mm, total width: 1,800 mm, total height: 3,100 mm, power: 7.5 kW (10.20 HP), pressing force: 120 t, clearance between the columns: 2,550 mm, Equipment: documentation/manual, Press brake SAFAN - H-Brake 120TS1 MACH-ID 9820 Make: SAFAN Type: H-Brake 120TS1 Control: TS1 Lsdpfxjz Hka Aj Ah Seru YOP: 2005 Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X/ Z1 / Z2 / R-Central Control: TS1 Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1987, machine/vehicle number: 17251, Pressing force: 63 tons, with draw cushion and separate hydraulic unit. Lrodpfxoz Nhp Is Ah Sju

Condition: good (used), functionality: fully functional, Year of construction: 2015, bending force (max.): 230 t, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame in all-steel construction - Press beam, stress-relieved by annealing - Spherical mounting of the press beam with inclination - Electro-hydraulic upper drive with 4-cylinder technology - Generous bending clearance - Flat front covers - Modern block hydraulics - Electronic pressure gauge - Measuring system with glass scale and spring compensation - Hydraulic oil in the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Back gauge system - Rear back gauge system, 2 axes, X and R axes - 2 back gauge fingers with secure adjustment from the front Lredpfx Ahsz Rl Nhs Seu Tool clamping - Upper tool holder, manual clamping, hardened - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - Manual crowning Control system - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15-inch touch screen - Network capable - Teleservice via modem Operation - Control panel with LCD keypad and foot switch - Communication bus Safety - Standard safety devices

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 94,201 h, control type: CNC control, bending force (max.): 400 t, installation height: 595 mm, Bending length [mm] 3550 Pressing force [tons] 400 Control system Cybelec ModEva 10s Standard equipment: - Sturdy machine frame as a welded construction in all-steel design - Press beam with high bending strength - Electro-hydraulic upper drive via proportional valves - Modern block hydraulics Lredez Rmcvopfx Ah Sju - CNC rear stop for X and R axes, safe displacement of the stop fingers from the front by means of a safety interlock - Upper tool clamping system "EHT", manual, head width 26mm, load max. 3000 kN/m - Lower tool clamping system EHT, manual, clamping width 90mm for block tools and 13mm for single V-dies, without clamping - Control system: CYBELEC ModEva 10S on Windows, 2D graphic control with a 10.4" color screen - Control cabinet air conditioning + Rear stop - System 1, 5 axes, straight finger, 140mm wide, adjustment of R axis 150mm + EHT quick clamping device, for upper tools, pneumatic, head width 26mm, load max. 3000 kN/m (self-centering horizontally) + EHT lower tool clamping, pneumatic, clamping width 55mm + Hardened insert strip, for EHT lower tool clamping 55mm / 90mm + Lower tool displacement, CNC-controlled, infinitely adjustable via rear stop 1 (max. 4550 mm working length) + Crowning device CNC-controlled, in the table without tool clamping, load max. 3000 kN/m + Safety device LaserSafe (up to max. upper tool height 440mm) + Additional foot switch + Bending aid 1st arm, load max. 1500N with 2 integrated support strips in standard design + Bending aid 2nd arm, load max. 1500N with 2 integrated support strips in standard design + 2 pcs. support strips for a bending aid with T-slot 14mm and scale and ball rollers + 2 pcs. table extension for bending aid + Short park position left + Short park position right

Condition: used, Year of construction: 2016, Waste disposal system consisting of: 1 Clean air dust collector with briquetting press JP 350-L 1 Clean air dust collector with rotary valve airlock JZ 350-L Year of manufacture: 2016 Technical data JP 350-L: Lrsdoz Rrbdjpfx Ah Sju Suction nozzle: 350 mm Nominal volume flow: 6580 m³/h Maximum volume flow: 8000 m³/h Negative pressure at nominal volume flow: 2750 Pa Motor power: 11 kW Rated speed: 3000 rpm Technical data briquetting press CS3-12: Throughput capacity max. 50 kg/h or 0.75 m³/h (material-dependent) Motor, hydraulic pump: 3.0 kW Motor, agitator: 0.37 kW Motor, dosing screw: 0.75 kW External fuse: 16A Briquet diameter: 65 mm Weight: 780 kg Storage container: 1200 x 1200 mm Overall external dimensions: 3150 x 1625 x 2742 mm Space required: 4500 x 3000 x 2900 mm Availability: approximately 11/2027 Location: Hesse

Condition: used, Year of construction: 1998, pressing force: 100 t, For sale is a used die-setting press from the manufacturer REIS with a maximum pressing force of 100 tons. The machine has a table size of 1,100 × 800 mm, a maximum installation height of 950 mm, and numerous features, including an ejector in the table, oil connection boxes for core pulls, and a 180° pivoting ram plate. It is therefore particularly suitable for die-setting operations, tool try-out, and testing in mold and tool making. ##### Technical Data + Information: Die-setting press – 100 tons – 1,100 × 800 mm Lredpjxd Tiqofx Ah Seu ==== General Information - Design: 4-column die-setting press - Manufacturer: REIS - Type: TUS 80–100 - Year of construction: 1998 - Pressing force: 26–100 tons (adjustable) - Retraction force max.: 45 tons - Table size: 1,100 × 800 mm - Max. table load: 5,000 kg - Installation height max.: 950 mm - Overall dimensions (W x D x H): approx. 2,100 × 3,395 × 3,670 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm ==== Hydraulic Cylinder - Pressing force range: 26–100 tons - Retraction force: 45 tons ==== Hydraulics & Drive - Hydraulic pump: REXROTH SYDFE11x71RN0030CAM - Motor power: 7.5 kW - Working pressure max.: 200 bar - Pressure accuracy: ±5 bar - Tank volume: 200 l - Hydraulic oil: HLP 36 ==== Motion System - 180° pivoting ram plate - Load capacity of the pivoted ram plate: up to 3 tons - Ejector in the ram: 3.5 tons - Ejector stroke: 130 mm - Extendable table - Table can be tilted to both sides - Movable ejector in the table - Oil connection boxes for core pulls - Injection molding filling device in the ram - Quick clamping plate on the ram ==== Control - Operation via control panel - Press force setting - Operation of core pulls - Control: Siemens / Pilz - Digital measuring device ==== Safety - Industrial machine control - Operator panel with safety functions ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connection power main motor: 7.5 kW - Total connection power: 10 kW ##### Application areas: Die-setting, tool try-out, mold making, tool making, injection molding tools, automotive, prototype construction, trial tools, maintenance, production preparation (Die-setting press, try-out press, tool try-out press, hydraulic press, REIS TUS 100, 100 ton press, 4-column press, testing press, mold making press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety standard NR 12, which is based on these. Our core strength lies in special machine construction and press automation. We distribute customized hydraulic presses at surprisingly favorable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 417 h, Amada HFE M2 5012 Press Brake (2021) Manufacturer: Amada Type: HFE M2 5012 Press Brake Condition: used, currently in production Year of manufacture: 10/2020 Operating hours: 6830 h Working hours: 417 h (still in use) Pressing force (kN): 500 Press beam length (mm): 1270 Distance between machine uprights (mm): 1035 Stroke (mm): 150 Opening width without die holder (mm): 480 Overhang (mm): 100 Lrjdpfxezwppys Ah Sou Working height (mm): 920 Working speed (mm/sec): 15 Approach speed (mm/sec): 185 Opening speed (mm/sec): 185 Dimensions: Length (mm): 2585 Width (mm): 2190 Height (mm): 2420 Weight (kg): 3600

Condition: as good as new (ex-display), functionality: fully functional, A very nice paper drill is for sale (like new). Lrodpfx Ajz N Ag Ish Seu Type 290, with 2 drilling heads and a sliding table, 230 volts. Powerful motor. User-friendly. You are welcome to test this machine at our location. We can arrange transport and packaging for you and load it into a truck or container. Please inquire about a price including transport (within the Netherlands). Best regards, Henk Hoos.

Condition: used, Technical details: pressure: 200 t stroke: ca. 200mm mm table surface area: L:1200xH:450 mm jaw width: 1000x200 mm total power requirement: 18 kW weight of the machine ca.: 15 t dimension machine xH: 4,5x1,5x2,2 m Beam - Straight Bending Machine - electric box (LxWxH:0,85x0,8x2,7m) - chuck intake: LxW 1200x220mm Ljdpfxju Nfrpe Ah Sjru - chuck adjustment 200mm moveable - opening width of chucks 300mm - manual control accessories: - div. limit stops, tools, try square and marking gauges i.D. *

Condition: used, Technical details: Lodpfxsu Nfr Ne Ah Seru pressure: manuell t stroke: 15 mm machine weight approx.: 8,4 kg dimensions of machine: 600x250x70 mm Pneumatic Cable Terminal Press - application: press of cable terminal on electrical cable and air-conditioning lines futher details: - press cylinder: slide Ø 25mm: outer diameter Ø 68mm: maximum extension length approx 15mm - tool fork: width=30mm ; length=70mm - maunal lever Ø 30 x L:300mm equipment - toolbox with div. round and hexagonal tool jaws i.D. *

Condition: used, Year of construction: 1960, Technical details: pressure: 10 t throat: 255 mm max. ram stroke: 400 mm ram speed - reverse: 0,180 m/sec. m/sec. ram speed - forward: 0,080 m/sec. m/sec daylight dimension : table/slide up: 630 mm daylight dimension : table/slide low: 230 mm table clamping surface:: 420 x 400 mm passage opening in table: 220 mm surface area of ram: 200 x 200 x 65 mm total power requirement: 1,6 kW weight of the machine ca.: 1,1 t Lrsdpfx Aeu Nfudoh Sou dimension machine xH: 1,1 x 0,5 x 2,1 m

Condition: used, Technical details: Pressure: 2,5 t throat: 155 mm max. ram stroke: 280 mm distance table/ram: 450 mm clamping plate on table: 260 x 1000 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 930 mm total power requirement: 1,1 kW Lredpfeu Nfv Uex Ah Sou weight of the machine ca.: 500 kg dimension machine xH: 0,85 x 1,0 x 17 m The machine is equipped for straightening work. *

Condition: used, Technical details: pressure: 0,9 t daylight dimension : table/slide up: 350 mm throat: 295 mm ram diameter: 40 mm Table dimensions: 600 x 330 mm height over floor: 935 mm weight of the machine ca.: - t dimension machine xH: 1,2 x 0,8 x 2,1 m Punch holder with M24x60mm internal thread Hydraulic power unit Röhm-Gamet, type 1E1 HS299, pressure 38bar, tank capacity approx. 50 liters One-hand operation Ljdpeu Nfw Sefx Ah Sjru *

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t stroke: 20 fest mm no. of strokes: 55 Hub/min throat: 355 mm mortise hole in ram: Ø 36 mm Lredpeu Nfizjfx Ah Sju table surface area: 900x640 mm ram adjustment: 150 mm clamping surface ram: 500x415 mm height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimension machine xH: 1,46x1,58x2,57 m transport dimensions LxWxH: 1,9x1,6x3,1 m Press is without electric cabinet, optional construction of electric cabinet possible. *

Year of construction: 2019, condition: new, We offer bending tools and punching tools for TRUMPF, AMADA, BYSTRONIC, LVD, SALVAGNINI, DURMA, ERMAKSAN, MVD, and HACO machines. Lrjdpfxed H T Tfo Ah Sou Standard and custom tools. Please send us your requirements, and we will provide you with the appropriate tool.

Year of construction: 1994, condition: good (used), machine/vehicle number: 24.105, A used, well-maintained hydraulic press brake HATASTAR, equipped with: - CYBELEC DNC 70 control system - Controlled axes Y1, Y2, X, R - Hydraulic upper tool clamping - Hydraulic crowning - FIESSLER AKAS safety system - Tools - Press brake manual - Documentation Bending length 4600 mm Frame width 4100 mm Pressing force 1350 kN Stroke 220 mm Rapid traverse 140 mm/sec Working speed 10 mm/sec Return speed 100 mm/sec Lredpfxsfthzko Ah Seu Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Year of construction: 1966, condition: good (used), Used, well-maintained eccentric press, Weingarten, with pneumatic retraction, piece counter, documentation, press test book, spare parts (2 pallets). Pressing force: 1500 kN (150 tons) Stroke: 60 mm Ledpfx Ahoir I Slj Sjru Ram, small/large stroke: 10 – 140 mm Overhang: 550 mm Cylindrical mounting: 30 mm Table width x depth: 1200 x 1000 mm Dimensions width x depth x height: 150 x 270 x 290 cm Weight: 13,500 kg Technical data and dimensions: Subject to change without notice.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Table size 2600*1800mm Lrjdpfxorl Irkj Ah Ssu maximum daylight 2200 mm clamping force 300T table size 2600*1800mm max day light 2200mm clamping force 300T

Condition: new, Year of construction: 2026, pressing force: 120 t, DURENDUS 120 T Workshop Press – Single-Column Press – 1,250 mm clear width, 400 mm stroke The machine shown here has already been built and delivered to a customer. We can supply you with this machine from our stock or manufacture it new – and we will gladly consider individual options. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial environments. Options (on request): The listed options are based on realized customer projects and enable a targeted adaptation of the machine to the specific application. The basic machine represents a functional standard version – in practice, it is usually expanded with additional equipment and configured accordingly to the project. Tabletop with X-shaped T-slot 700 × 1,000 × 100 mm Pressure adjustment Lateral displacement of the press ram (900 mm) Bending tool Torsion-proof cylinder with manual stroke adjustment V-profile straightening bolster in combination with a tabletop LED lighting Foot switch Cooling ===== Technical data + information: ==== General information Type: Workshop press Press force: 120 t (optionally adjustable) Total weight: approx. 1,300 kg Overall dimensions (W × D × H): 1,800 × 900 × 2,550 mm ==== Working area Clear width: 1,250 mm Open depth: 400 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,250 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 200 mm Piston rod: Ø 125 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 7.7 mm/s Return speed: 12.6 mm/s ==== Hydraulics & Drive Pump output: 14.5 l/min Motor power: 4 kW Hydraulic tank: 29 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Hand lever operation Manual fine adjustment via hand lever Connection: 400 V / 50 Hz Total connected power: approx. 4.5 kW ==== Equipment Lrjdpfx Ahjy Hqwgs Sou Height-adjustable crossbeams with bolt locking Chain mechanism for table adjustment Pressure gauge for pressure indication Emergency stop switch CE certification Two-layer paint finish according to RAL ===== Pressing, extracting, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed the Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our great strength is special machine construction and press automation. We distribute tailor-made hydraulic presses at surprisingly favorable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Condition: new, Year of construction: 2026, pressing force: 180 t, DURENDUS 180 T Workshop Press – Single-Column Press – 1,400 mm clear width, 400 mm stroke The machine shown here has already been built and delivered for a customer order. We can supply you with this machine from stock or manufacture it new – and are happy to take individual options into account. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial environments. Options (on request): The options listed are based on realized customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional standard version – in practice, it is usually expanded with additional equipment and configured accordingly for the specific project. Tabletop with X-shaped T-slot 700 × 1,000 × 100 mm Pressure adjustment Lateral displacement of the press ram (900 mm) Bending tool Twist-proof cylinder with manual stroke adjustment V-profile straightening bolster in combination with the tabletop Lrsdpfx Ahey H A T Ts Ssu LED lighting Foot switch Cooling ===== Technical Data + Information: ==== General Information Type: Workshop press Press force: 180 t (optionally adjustable) Total weight: approx. 1,700 kg Overall dimensions (W × D × H): 1,900 × 900 × 2,700 mm ==== Working Area Clear width: 1,400 mm Open depth: 400 mm Installation height: 250–900 mm (variable) ==== Table & Ram Cross member usable width: 1,400 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 240 mm Piston rod: Ø 135 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 8.1 mm/s Return speed: 11.8 mm/s ==== Hydraulics & Drive Pump capacity: 22 l/min Motor power: 7.5 kW Hydraulic tank: 42 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Hand lever operation Manual fine adjustment via hand lever Connection: 400 V / 50 Hz Total connected power: approx. 8 kW ==== Equipment Height-adjustable cross members with pin locking Chain mechanism for table adjustment Pressure gauge for pressure indication Emergency stop switch CE certification Two-layer paint finish according to RAL ===== Pressing, expelling, assembly operations, straightening operations, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Directives and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all aspects of the national Brazilian safety directive NR 12, which is based on these. Our great strength lies in the design and manufacture of special machines and press automation. We distribute customized hydraulic presses at surprisingly favorable prices. The hydraulics of the presses predominantly use components from leading European manufacturers.

Condition: new, Year of construction: 2026, pressing force: 300 t, DURENDUS 300 T Workshop Press – Single-Column Press – 1,600 mm clear width, 550 mm stroke The machine shown here was already manufactured and delivered for a customer order. We can produce this machine for you very quickly – and we are happy to take into account individual options. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial environments. Options (on request): The listed options are based on realized customer projects and enable a targeted adaptation of the machine to the respective application. The basic machine represents a functional standard version – in practice, it is usually expanded with additional equipment and configured accordingly to the specific project. Lodpfx Ahoy H Df Re Sjru * Tabletop with X-shaped T-slot 800 × 1,200 × 120 mm * Pressure adjustment * Lateral displacement of the press ram (1,000 mm) * Bending tool * Twist-resistant cylinder with manual stroke adjustment * V-profile straightening bolster in combination with the tabletop * LED lighting * Foot switch * Cooling ===== Technical Data + Information: ==== General Information * Design: Workshop press * Press force: 300 t (optionally adjustable) * Total weight: approx. 3,200 kg * Overall dimensions (W × D × H): 2,950 × 1,100 × 2,800 mm ==== Working Area * Clear width: 1,600 mm * Open depth: 550 mm * Installation height: 250–900 mm (variable) ==== Table & Ram * Crossmember usable width: 1,600 / 600 mm * Ram stroke: 400 mm * Cylinder diameter: Ø 330 mm * Piston rod: Ø 205 mm * Height adjustment: via chain mechanism ==== Speeds * No-load speed: 9.3 mm/s * Return speed: 15.2 mm/s ==== Hydraulics & Drive * Pump output: 48 l/min * Motor power: 22 kW * Hydraulic tank: 90 l * Pressure accuracy: ±5 bar * Hydraulic system: DUPLOMATIC ==== Control & Operation * Hand lever operation * Manual fine adjustment via hand lever * Connection: 400 V / 50 Hz * Total connection power: approx. 23 kW ==== Equipment * Height-adjustable crossmembers with pin locking * Chain mechanism for table adjustment * Pressure gauge for pressure indication * Emergency stop switch * CE certification * Two-layer paint finish according to RAL ===== Pressing, unpressing, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety regulation NR 12, which is based on these. Our great strength lies in special machine construction and press automation. We distribute custom-made hydraulic presses at surprisingly affordable prices. Leading European manufacturers' components are mainly used for the presses' hydraulics.

Condition: good (used), Year of construction: 2019, Schuler BEUTLER press Type: MC 4000 Year of manufacture: 2017 Ledpfxsz Szrhj Ah Seru Pressing force: 4,000 kN Stroke rate: 20-80 strokes/min Stroke adjustment: 40-315 mm Ram adjustment: 200 mm Installed height: 750 mm Table area: 3,000 x 1,400 mm Ram area: 3,000 x 1,300 mm Press weight: 72,000 kg including GSW Schwabe strip feed line Strip width: 80 - 500 mm Strip thickness: 0.8 - 4.0 mm Coil capacity: 5,000 kg

Condition: used, Heavy-duty pneumatic gluing press with perforated sheet metal for flexible positioning of the press cylinders. One cylinder without a pressure shoe. Lrodozryy Eepfx Ah Sou Technical data: - Pressing area: approx. 2,800 x 1,000 mm - Width: 600 mm - Height: 1,800 mm - Press cylinders: 6