Used Mesh Basket Shelf for sale (2,972)

Condition: as good as new (ex-display), Year of construction: 2026, Ultrasonic washing system – ultrasonic cleaning device Chamber made of stainless steel 1.4401 (AISI 316L) - includes insulated hinged lid - includes level monitoring / dry-run protection - includes 1 stainless steel wire mesh basket - Bottom ultrasonic transducer, frequency: 25 kHz, power (effective/peak): 600/1,200 watts - Heating up to 80°C, adjustable; power: 2,600 watts - Basket dimensions: L x W x H 320 x 320 x 280 mm - Tank dimensions: L x W x H 420 x 400 x 350 mm - External dimensions: L x W x H 520 x 650 x 850 mm - Max. load capacity of the basket: 30 kg Ndsdpfjlccuzjx Aazsb - Device is mobile

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Nodpfxsmhh Dto Aazodb Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Year of construction: 2002, 040 USED Semi-Stal tunnel basket washer. Ndjdpfx Aasvy Uxiezjb EXTERNAL DIMENSIONS (in cm.): - H: 230, - W: 250, - L: 1150. WASHING BASKET DIMENSIONS (in cm.): - W: 40, - H: 20-25. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, shelf length: 2,700 mm, load capacity: 600 kg, frame height: 9,000 mm, Jungheinrich MPB pallet racking – over 1,000 frames and several thousand beams We offer for sale a very large quantity of used Jungheinrich MPB pallet racking. Available components: Frames: heights from 3000 mm to 10,000 mm, over 1,000 units, various height and load-bearing capacity options. Beams, 2700 mm long: load capacity 3 x 500 kg, load capacity 3 x 600 kg, load capacity 3 x 800 kg. Ndjdpezrnnkofx Aazeb Beams, 3600 mm long: load capacity 4 x 500 kg, load capacity 4 x 600 kg. A total of several thousand beams are available, allowing for the preparation of both individual racking rows and complete warehouse installations. It is possible to purchase entire batches or selected quantities. Upon request, we will prepare a configuration tailored to the warehouse height, the type of pallets, and the required number of pallet spaces. We also offer: dismantling and assembly of racking, transport, preparation of a layout plan, selection of additional components and safety features. Please contact us to obtain a detailed offer, an up-to-date list of available components, and photographs.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 09/2019, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1340cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 8 mm Front right - 8 mm Ndsdpfxszzk Sqe Aazsb Middle left - 10 mm Middle right - 10 mm Rear left - 10 mm Rear right - 11 mm

Condition: good (used), total length: 1,380 mm, total width: 500 mm, total height: 2,000 mm, Technical data for the firewood rack: Rack system: Dexion Type: HI280 Technical data for installation: Number of rack rows: 01 unit Rack length: 1,380 mm Number of bays per rack row: 01 unit Number of shelves plus base level: 05 units Note: The rack is offered without firewood. The firewood is for decorative purposes only. Included in the scope of delivery: 02x Rack uprights, used Material color: Sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm Incl. mesh side panels Mesh size: 50 x 50 mm The uprights are pre-assembled 2,000 mm high 500 mm deep Njdpfx Aaezrgxhjzsdb 05x Mesh grating shelf, used Material color: hot-dip galvanized Overall depth: approx. 482 mm (direction of the supporting bars) Overall width: approx. 1,270 mm (direction of the crossbars) Supporting bar dimensions: 20|1.80 mm Bearing: approx. 20 mm Frame height: approx. 20 mm Mesh size: 68 x 35 mm Weight/piece: approx. 6.72 kg 04x Shims, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: Sendzimir galvanized 10x Shelf crossbars, used Overall length: 1,280 mm Z-profile: 52 x 25 mm Number of hooks: 02 units Weight/piece: approx. 0.84 kg Material color: Sendzimir galvanized 01x Cross brace, used Material color: Sendzimir galvanized 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 297 x 210 x 2 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 04/2019, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1340cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg Nsdpfxezxkiqe Aazedb 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 10 mm Front right - 10 mm Middle left - 7 mm Middle right - 6 mm Rear left - 7 mm Rear right - 7 mm

Condition: new, Year of construction: 2019, Filter tank / gravel filter tank made of stainless steel (V2A), unused Technical data / dimensions Available quantity: 2 Volume: approx. 21,800 liters Tank type: Pressure tank Condition: unused Suitable for food: yes Design: upright Diameter inside: approx. 2,384 mm External diameter: approx. 2,396 mm Cylindrical height: approx. 4,000 mm Total height: approx. 6,576 mm Operating pressure: Overpressure Operating pressure: 6 bar Test pressure: 8 bar Wall thickness bottom: approx. 7 mm Wall thickness top: approx. 8 mm Wall thickness jacket / cylinder: approx. 6 mm Ground clearance: approx. 1,114 mm Operating temperature: 35 degrees Celsius Notes: Filter tank (gravel/water) with nozzle base, Filter area: approx. 4.5 m² Material / properties Material inner casing: V2A (1.4301) Feet material: V2A (1.4301) Surface outside: Glass bead blasted Surface inside: Rolled bright (2B) Features Stand shape: Feet Number: 4 Njdpfxoty Tids Aazodb Fastening: fixed Top shelf type: Basket arch base Bottom shelf type: Basket arch shelf Shelf type: Basket arch shelf Top floor: 1 x flange DN 600 with hinged cover 1 x DN 150 hole in the hinged cover 2 x crane eye Jacket: 1 x flange DN 200 with internal distributor pipe with 3 inlet nozzles 1 x type plate 1 x DN 500 manhole with hinged cover 1 x flange DN 100 in the cover of the manhole flange Underbody: 1 x flange DN 600 with hinged cover 1 x flange DN 100 in the cover Internal: 1 x nozzle base with filter nozzles (filter area approx. 4.5 m²) Documentation Drawing Test certificate Other: Material certificates Manufacturer's declaration

Year of construction: 2024, condition: new, weight max. in kg 300 kg dimensions 1200 x 900 x 1300 mm weight 125 kg For attaching to the forks. fastening with safety bolts, checker plate floor, entry door, safety grille, storage basket for tools, Fork pockets 190 x 100 mm, powder-coated. Approved for a maximum of 2 people, approved by Ndjdpfxjxcywrj Aazsb the dekra. Basket height 1050 mm Basket width 1100 mm Basket depth 700 mm

Condition: used, Year of construction: 2013, axle configuration: 4x4, fuel type: diesel, color: red, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 15.950 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 2.560 cm Dimensions of cargo space: 1201 x 238 x 271 cm Nsdov Tiqmepfx Aazodb CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 1610 m Production country: FR Additional information Please contact Christian Theißen for more information Manufacturer: Haulotte Model: HA260PX Year of build: 2013 Condition: Used Data: Max. working height: 25,60 m Platform height: 23,60 m Max. reach: 16,10 m Platform lifting capacity: 230kg Platform dimensions LxW: 1,80 x 0,74 m Swivel range: 360° Max. climbing capacity: 40% Total dimensions LxWxH: 12,01 x 2,38 x 2,71 m Movable up to working height: 25,60 m Wheel pressure max.: 64,5 kN Ground clearance: 0,30 m Drive type: Diesel Own weight: 15.950 kg Special features: Rotating work basket, basket arm/vertical rotation angle 140°, all-wheel drive, differential lock, permanently installed soot filter. Location: 41468 Neuss immediately available

Condition: ready for operation (used), pressure 30.0 t Njdpfxjznng Sj Aazsdb punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. Features: - Electro-hydraulic punch press with long reach - Material/sheet metal scraper - Very large material support table (!) * with adjustable depth stops - Continuously variable stroke adjustment - Freely movable foot switch, including protective cover - Side storage shelf - Assortment of punches and dies - Original operating instructions

Condition: used, maximum load weight: 1,500 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 10/2023, total width: 2,090 mm, total height: 1,980 mm, Errors and prior sale excepted! Internal number: 1411. AAA0483 ----EQUIPMENT * Sales vehicle * Stainless steel cladding * Sales hatch on the left * Sales counter in stainless steel * Accessory shelf * Hygiene package with double sink * Hot water boiler with cold water pump * Deep fryer with 2 baskets * Bain-marie BMH160 * Storage refrigerator * Refrigerated table with 6 drawers * Refrigerated counter top * 2x extractor hood * LED counter and ceiling lights * Overrun brake system * Supports at the front and rear Ndedpfxozfdm Ns Aazjb * Support wheel * Compartment for 2 gas cylinders ... and more ----The vehicle is in original condition! Nationwide delivery possible for an additional charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing / leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: good (used), Year of construction: 2023, lifting height: 9,030 mm, Lifting capacity: 120 kg Working height: 1.103 cm Dimensions of cargo space: 612 x 202 x 268 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Max. horizontal reach: 600 m Ndedpjwn Hr Ajfx Aazob Please contact Christian Theißen for more information Manufacturer: France Elevateur Model: Topy 11.1 Year of build: 2023 Condition: Used Data: Max. working height: 11,03 m Max. platform height: 9,03 m Max. reach: 6,00 m Total dimensions LxWxH: 6,12 x 2,02 x 2,68 m Platform dimension WxD: 0,68 x 0,63 m Length of transport position: 6,12 m Height transport position: 2,68 m Max. basket load: 120 kg Swivel range: 2 x 210°=400° Ground clearance: 0,19 m Own weight: 2.623 kg Total permissible weight: 2.743 kg Special features: Trailer hitch, reversing camera, paint in RAL 9003 white, motor start/stop in the work cage, 2x LED beacon + triflash, 2x wheel chocks incl. bracket, socket in the basket, without supports. Information: TÜV and UVV new

Condition: new, I - beam section - flat steel 100 x 15 (d 450) mm I-beam section - upend 60 x 10 (d 500) mm L-beam 50 x 6 (d 1000) mm round material 35.0 (d 600) mm bar material dia. max. 70 x 2 (d 1000) mm square material 50 x 50 x 3 mm bending speed 4.5 m/min roll diam. toproll 155 mm bore 50.0 mm total power requirement 1.5 kW weight 400 kg range L-W-H 990 x 750 x 1350 mm Equipment: Nodszx Hd Repfx Aazedb - robust electro-motorized ring/profile bending machine - machine base frame, with rear shelf - horizontal and vertical work possible - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity - operating instructions in German

Condition: as good as new (ex-display), Year of construction: 2023, I - beam section - flat steel 120 x 15 (d 750) mm I-beam section - upend 60 x 10 (d 800) mm L-beam 50 x 5 (d 1200) mm round material 35,0 (d 800) mm bar material dia. max. 70 x 2 (d 1200) mm square material 50 x 40 x 3 mm bending speed 4,3 m/min roll diam. toproll 155 mm bore 50,0 mm total power requirement 1,5 kW Ndedjxcui Aepfx Aazsb weight 320 kg range L-W-H 730 x 830 x 1350 mm Exhibition machine from 2023 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - robust electro-motorized ring/profile bending machine - machine base frame, with rear shelf - horizontal and vertical work possible - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity - operating instructions in German

Condition: good (used), Year of construction: 2014, lifting height: 30,500 mm, fuel type: diesel, General information Mileage: 73.006 km Weights Empty weight: 7.240 kg Functional Lifting capacity: 320 kg Working height: 3.250 cm Dimensions of cargo space: 880 x 255 x 355 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 2088 m Max swing of platform in degrees: 500 Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: T 330 Year of build: 2014 Ndjdpfx Aaszzvygszsb Condition: Used Data: Max. working height: 32,50 m Max. platform height: 30,50 m Max. reach: 20,88 m Platform dimensions LxW: 1,71 x 0,86 m Max. basket load: 320 kg Swivel range: 500° Ground pressure: 56 kN (front) / 42 kN (back) Ground clearance: 0,15 m Support width both sides: 5.30 m (front) / 5.20 m (back) Support length: 4,87 m Total dimensions LxWxH: 8,80 x 2,55 x 3,55 m Driving license category: C1/3 Empty weight: 7.240 kg Total permissible weight: 7.490 kg Special features: Rotatable work basket, basket arm, rotation angle, power connection in the basket, loading area with loading side panels, van body. WITHOUT roof protection. Information: TÜV und UVV new Location: 41468 Neuss immediately available

Condition: used, Year of construction: 1991, HAMBA BK 8006-P Ultra-Clean Cup Filling and Sealing Machine The HAMBA BK 8006-P is a high-performance, fully automatic, linear multi-lane cup filling and sealing machine engineered for the precise packaging of dairy, dessert, and liquid food products. Built to rigorous German engineering standards, this system combines exceptional throughput with advanced "Ultra-Clean" hygienic technology, ensuring extended product shelf life and uncompromising safety. Key Performance Capabilities - High-Speed Output: Delivers high-volume production capacities reaching up to approximately 12,000 cups per hour (depending on container dimensions and product viscosity). - Multi-Lane Linear Efficiency: Utilizes a space-saving, index-motion linear conveyor system for continuous, stable container handling. - Precise Multi-Component Dosing: Configured to accurately portion multi-layer products, making it ideal for puddings with toppings, yogurts, and layered desserts. Ndedpfozqtkzjx Aazob Advanced Hygiene & Ultra-Clean Standards - Contamination Control: Equipped with integrated sterile air and containment enclosures to safeguard open product zones. - Container Sterilization: Employs specialized sterilization modules (such as steam, UV, or chemical sanitization) to treat cups and lidding foil prior to filling. - CIP/SIP Ready: Designed for seamless integration into Clean-in-Place and Sterilize-in-Place plant loops to minimize changeover downtime. * Station 1: Cup station Station 2: For level control and for double or missing cup Station 3: H2O2 disinfection station for cups * Station 4: Filling station Station 5: Aluminum lid H2O2 disinfection station * Station 6: Thermal sealing station * Station 7: Expiration date print station * Station 8: Integrated gripper

Condition: new, Year of construction: 2026, power: 15 kW (20.39 HP), BASKET MILL Nodpfxjzzvyas Aazsdb

Condition: used, Consisting of: “Thermopac - WANSON” thermic oil installation Type 200B 10 FT container natural gas burner power: 233 kW 3 x 400 V, 50 Hz 7.5 kW dimensions (L x W x H): ± 3,000 x 2,450 x 2,600 mm + Thermal oil pump Bathyscaphe Flue gas exhaust stack + “GEA-CFS” fryer Type BR 6000/600 all stainless steel suitable for thermal oil heating infeed height : ± 900-950 mm outfeed height : ± 1.150 mm max. oil level above the belt : 120 mm suitable for fire protection Ndedpfxozzwmhe Aazsb with top hold down belt Oil circulation system net belt length 6.000 mm net belt width 600 mm adjustable speed sediment removal system filter lifting unit with electrical hoists dimensions (l x w x h) : ± 8.700 x 2.200 x 3.800 mm “Saval” fire suppression system + Paper filter Type OMR 120-60 50 Hz - 400 V 4.5 kW 525 kg dimensions (L x W x H): ± 2.800 x 1.700 x 2.200 mm + Cooling conveyor with ambient temperature all stainless steel variable speed 50 Hz, 400 V 2.61 kW net conveyor length ± 6.000 mm net conveyor width ± 900 mm wire mesh belt (3 mm) dimensions (L x W x H): ± 7.600 x 1.700 x 2.000 mm

Condition: good (used), Year of construction: 2015, lifting height: 30,500 mm, fuel type: diesel, Weights Empty weight: 7.240 kg Functional Lifting capacity: 320 kg Working height: 3.250 cm Dimensions of cargo space: 880 x 255 x 355 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 2090 m Max swing of platform in degrees: 180 Production country: DE Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: T 330.1 Year of build: 2015 Condition: Used Data: Max. working height: 32,50 m Max. platform height: 30,50 m Max. reach: 20,88 m Total dimensions LxWxH: 8,80 x 2,55 x 3,55 m Platform dimensions LxW: 1,71 x 0,86 m Max. basket load: 320 kg Swivel range: 180° Ground pressure: 56 kN Ground clearance: 0,15 m Support width vertical: 2,53 m Support width one side: 3,86 m Support width both sides: 5,30 m Ndedpfx Aozzxypeazeb Support length: 4,87 m Empty weight: 7.240 kg Driving license category: C1 / 3 Special features: Rotating work basket, jib arm, rotation angle, WITHOUT overhead guard, advantage: power and water connections in the basket, cargo bed with drop sides, box body, exceptional lateral outreach, automatic setup and stowing, greatest outreach on a 7.5t chassis. Information: TÜV and UVV inspections new

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, working width: 1,650 mm, wire diameter (max.): 7 mm, Schlatter MG930, quick change, DC welding machine with 5 DC transformer, 1092 kVA. Schlatter control from 2007 with S7-300 PLC. Automatic line wire loader up to 3m, automatic line wire channel positioning, open portal DC welding machine, quick change cross wire hopper, MLV1 pullout and stacker. Nedpfxszd Sule Aazedb

Condition: excellent (used), Year of construction: 2013, PRATTO equipment for zinc coated welded meshes Technical data for the machine : STARWELD PE is a high-performance mesh welding line for the production of fine & light mesh in rolls or rolls & sheets • 2 pay-off for feeding the cross wire • 36 pay-off for feeding the line wire • Fence dimensions between 1 and 3 m (2 types can be made simultaneous, example 1 m with 2 m, 1.5 m with 1.5 m, 1.2 m with 1.8 m) • Range of wire diameter 1.2 – 3 mm • Working speed (strokes/min) Up to 130 • Automatic stacking of rolls Ndedeyxn Rnspfx Aazjb • ⁠PLC management

Year of construction: 2010, condition: excellent (used), Technical Details : Ndsdsfwm D Topfx Aazsb - For sale Full automatic mesh welding line PITTINI / EVG - Mesh width - max. 2400 mm - Mesh length - max. 8000 mm - Dia. Longitudinal wire - max. 10 mm - Dia. Cross wire - ma. 10 mm - Max. number of longitudinal wire - 24 - Longitudinal and cross wire from spools - Cross wire feeding unit - EVG - Speed - max. 110 tacts / min. - installed power - 1,5 Mw - Automatic mesh packing unit

Condition: good (used), Year of construction: 2006, lifting height: 25,000 mm, fuel type: diesel, General information Mileage: 112.606 km Weights Empty weight: 7.420 kg Functional Lifting capacity: 350 kg Working height: 2.700 cm Working width: 248 cm Dimensions of cargo space: 800 x 248 x 350 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1980 m Max swing of platform in degrees: 540 Additional information Please contact Christian Theißen for more information Manufacturer: Wumag Model: WT 270 Year of build: 2006 Condition: Used Data: Max. working height: 27,00 m Max. platform height: 25,00 m Max. reach: 19,80 m Total dimensions LxWxH: 8,00 x 2,48 x 3,50 m Platform dimensions LxW: 1,60 x 0,80 m Max. basket load: 350 kg Swivel range: +/- 540° Ground pressure: 24/20kN Ground clearance: 0,20 m Support width vertical: 2,48 m Support width one side: 3,69 m Support width both sides: 4,90 m Support length: 5,03 m Empty weight: 7.420 kg Special features: Rotating work basket Ndedpfx Ajy Rk U Teazjb Information: The vehicle is sold as standard WITHOUT roof protection. TÜV and UVV new. Location: 41468 Neuss immediately available

Condition: good (used), Platform trolley, transport trolley, shelf trolley, sorting trolley, order picking trolley, box trolley, tray trolley, embroidery trolley Ndjdpfx Aajz Ahqgozeb -Transport vehicle: Box van -Case capacity: 220 liters -Chassis: 2 fixed casters, 2 swivel casters with brakes -Number: 7 cars available -Price: per piece -Overall dimensions: 1250/575/H700 mm -Weight: 46 kg/unit