Used Cantilever Rack Shelf for sale (8,303)

Condition: good (used), Technical data for the shelf connector: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x shelf connector, used for shelf spacing: 700 mm Total length: 700 mm Cross section: U 35x25 mm Vr9Octwuu Material thickness: approx. 2.00 mm Material color: blue Drill hole diameter: 11 mm Weight: 0.930 kg | piece 02x screws M10 x 35 mm 02x nuts M10 Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this article is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: used, load per truss pair (max.): 3,000 kg, total height: 4,050 mm, shelf length: 16,900 mm, Technical data for the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Shelf length: approx. 16,900 mm Number of bays per rack row: 06 pcs. 2,700 mm each Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 09 pcs. Pallet spaces per rack row: 54 pcs. Total pallet spaces: 54 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 1,000 kg The scope of delivery includes: 07x pallet rack uprights, used Material color: grey Frame profile: PLFB155 Pskjtzbfcd Profile dimensions: 100 x 65 x 2.25 mm Incl. cross and diagonal braces, foot plates The uprights are pre-assembled ( bolted framework ) 4,050 mm high 1,100 mm deep 24x pallet rack traverse, new Material color: Ral 2004 orange Box profile: 130 x 50 mm Beam type: PNB 0413 S355MC Agraffe: 4 HK (hooks) Clear width: 2,700 mm Max. load per pair of beams 3,000 kg with evenly distributed load 48x locking pins, new Version: completely galvanized To secure the longitudinal beams against unintentional lifting out 28x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 14x shims, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x load plates with details of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 22,300 mm Number of bays / row of shelves: 06 units of 3,600 mm each Number of levels plus floor level: 04 pcs. Technical data on volume: Pallet spaces per bay: 20 pcs. Pallet spaces per row: 120 pcs. Total pallet spaces: 120 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 800 kg The scope of delivery includes: 07x pallet rack uprights, used Dlftq82Gz Material color frame: Ral 5015 blue Material color of framework: galvanized Frame profile: PLFB 16 Profile dimensions: P 100 x 68 x 2.5 mm Incl. cross and diagonal struts, base plates The uprights are pre-assembled ( bolted framework ) 8,110 mm high 1,100 mm deep 48x pallet rack cross member, used Material color: RAL 2004 orange Box profile: 145 x 50 x 1.75 mm Beam type: PNB0445 Bracket: 4 HK (hooks) Clear width: 3,600 mm Max. load per pair of beams 3,200 kg with evenly distributed load 96x locking pin, used Version: completely galvanized For securing the longitudinal beams against unintentional lifting out 28x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 14x shim plate, used Version: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, load per truss pair (max.): 3,000 kg, total height: 4,050 mm, shelf length: 67,300 mm, Technical data for the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Shelf length: approx. 67,300 mm Number of bays per rack row: 24 pcs. 2,700 mm each Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 09 pcs. Pallet spaces per rack row: 216 pcs. Total pallet spaces: 216 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 1,000 kg The scope of delivery includes: 25x pallet rack uprights, used Material color: grey Frame profile: PLFB155 Profile dimensions: 100 x 65 x 2.25 mm Incl. cross and diagonal braces, foot plates The uprights are pre-assembled ( bolted framework ) 4,050 mm high 1,100 mm deep 96x pallet rack traverse, new Material color: Ral 2004 orange Doeer7 Box profile: 130 x 50 mm Beam type: PNB 0413 S355MC Agraffe: 4 HK (hooks) Clear width: 2,700 mm Max. load per pair of beams 3,000 kg with evenly distributed load 192x locking pins, new Version: completely galvanized To secure the longitudinal beams against unintentional lifting out 100x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 50x shims, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x load plates with details of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), load per truss pair (max.): 3,000 kg, shelf length: 11,225 mm, frame height: 4,100 mm, Technical data for the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Shelf length: approx. 11,225 mm Number of bays per rack row: 04 pcs. 2,700 mm each Number of levels plus base level: 02 pcs. Technical data on volume: Pallet spaces per bay: 09 pcs. Pallet spaces per rack row: 36 pcs. Total pallet spaces: 36 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 1,000 kg The scope of delivery includes: 05x pallet rack uprights, used Material color: light blue Frame profile: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Incl. cross and diagonal braces, foot plates The uprights are pre-assembled ( bolted framework ) 4,100 mm high 1,100 mm deep 16x pallet rack traverse, new Material color: Ral 2004 orange Box profile: 130 x 50 mm Beam type: PNB 0413 S355MC Agraffe: 4 HK (hooks) Clear width: 2,700 mm Max. load per pair of beams 3,000 kg with evenly distributed load 32x locking pins, new Version: completely galvanized Cpote79F To secure the longitudinal beams against unintentional lifting out 20x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 10x shims, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x load plates with details of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), load per truss pair (max.): 3,000 kg, shelf length: 14,010 mm, shelf height: 3,300 mm, Technical data for the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Shelf length: approx. 14,010 mm Number of bays per rack row: 05 pcs. 2,700 mm each Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 09 pcs. Cei9B92N Pallet spaces per rack row: 45 pcs. Total pallet spaces: 45 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 1,000 kg The scope of delivery includes: 06x pallet rack uprights, used Material color: light blue Frame profile: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Incl. cross and diagonal braces, foot plates The uprights are pre-assembled ( bolted framework ) 3,300 mm high 1,100 mm deep 20x pallet rack traverse, new Material color: Ral 2004 orange Box profile: 130 x 50 mm Beam type: PNB 0413 S355MC Agraffe: 4 HK (hooks) Clear width: 2,700 mm Max. load per pair of beams 3,000 kg with evenly distributed load 40x locking pins, new Version: completely galvanized To secure the longitudinal beams against unintentional lifting out 24x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x shims, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x load plates with details of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), load per truss pair (max.): 3,000 kg, total height: 5,000 mm, shelf length: 14,220 mm, Technical data for the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Shelf length: approx. 14,220 mm Number of bays per rack row: 05 pcs. 2,700 mm each Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 09 pcs. Pallet spaces per rack row: 45 pcs. Total pallet spaces: 45 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 1,000 kg The scope of delivery includes: 06x pallet rack uprights, used Material color: RAL 5015 sky blue Frame profile: PLFB30 Bl93Umezvfa Profile dimensions: 120 x 92.5 x 2.50 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled ( bolted framework ) 5,000 mm high 1,050 mm deep 20x pallet rack traverse, new Material color: Ral 2004 orange Box profile: 130 x 50 mm Beam type: PNB 0413 S355MC Agraffe: 4 HK (hooks) Clear width: 2,700 mm Max. load per pair of beams 3,000 kg with evenly distributed load 40x locking pins, new Version: completely galvanized To secure the longitudinal beams against unintentional lifting out 24x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x shims, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x load plates with details of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Technical data for the pallet rack upright: Rack system: Stow Type: Pal Rack NS The scope of delivery includes: 01x pallet rack stand, used Material color: sendzimir galvanized frame profile: 140 x 80 x 2,25 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled ( screwed truss ) Height: 9.650 mm Depth: 1.100 mm General information about the item: This item is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Dpogcv7

Condition: used, Technical data for the frame profile: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x frame profile, used Material color: RAL 5015 blue Frame profile: PLUPA 33 Profile dimensions: 140 x 92.5 x 2.5 mm Frame height: approx. 11,260 mm Weight per unit: approx. 85.00 kg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery. Dqpfxd

Condition: good (used), Cantilever racking, heavy-duty racking, single-sided cantilever racking, pallet racking Bhnfi77X -Cantilever rack: one-sided, 4 bays, solid design, height 2000 mm -Stands: 5 pieces 2000/1370/85 mm -Cantilever arms: 26 pieces 185 x 70 mm -Cantilever length: 17x 850 mm 4x 1060mm / 5x 650 mm -Accessories: Cross braces/angle profiles/mounting clamps see photos -Transport dimensions: 2000/1370/H450 mm -Total weight: 590 kg

Condition: used, Four wins – The success factors of DLK – Storage technology | Levelmaker® | Logistics | Solutions WE OFFER Cantilever rack Cantilever rack fields Heavy-duty rack full-surface Grating floors Examples: No. 1 Net price: €20,000.00 Width: 23,750 mm Height: 5,100 mm Depth: 1,250 mm Ccnlyuor Axis dimension: 1,250 mm Levels: 5 Number of uprights: 20 Number of rows: 1 No. 2/3 Net price: €41,400.00 Width: 30,140 mm Height: 5,100 mm Depth: 1,250 mm Axis dimension: 1,370 mm Levels: 6 Number of uprights: 23 Number of rows: double row This is a used item. PROJECT PLANNING Our sales team will be happy to provide you with a non-binding offer tailored to your needs. TRANSPORT & ASSEMBLY We will be happy to help you with the transport and assembly of the goods. PAYMENT TERMS Payment terms must be agreed upon when placing an order. The price is understood as a unit price/net price or as stated in the description text (plus VAT). You will of course receive an invoice with VAT shown. ABOUT US The DLK company in Nordhorn deals with new and used products from the areas of warehouse logistics, conveyor technology, storage platforms, textile warehouses as well as machines for trade, industry and crafts. We continually offer you interesting used offers from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us.

Condition: new, Cantilever rack, new H: 400cm, base +3 storage levels with roof & rear panel Dqxscj Free delivery within Germany, except islands Data : - H : approx. 400 cm - D : approx. 147 cm - L : approx. 1420 cm - Cantilever arms : approx. 125 cm - Axial dimension: 290 cm (can be adapted to customer requirements) - New goods - made in Germany. - Delivery time approx. 6 weeks after commercial clarification. - 1000 kg load per arm - 4000 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 200 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 06 x uprights, incl. base approx. 400 cm made of IPE270. - 18 x cantilever arms approx. 125 cm made of IPE 120. - 06 x roof girder approx. 150 cm made of IPE 120, 5° rising roof pitch. - incl. roof and rear wall material. - incl. all necessary connecting elements and screws. Why BLT cantilever racks ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright base and upright back are welded together, providing additional safety and short assembly times because the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 12.250,00 € net plus statutory value added tax. You will receive an invoice with VAT shown. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your operating equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: good (used), Cantilever rack, heavy-duty rack 8Dcq8Et -Cantilever rack: base field double-sided, 2 uprights -Cantilever arms: 4 per side, length 500 mm -Compartment height: variably adjustable -Quantity: 2x shelves available -Price per piece -Dimensions: 1180/1195/H2960 mm -Weight: 139kg / 140kg

Condition: new, Year of construction: 2020, Cantilever rack NEW Data : - H : approx. 426 cm - D : approx. 137 cm - L : approx. 403 cm Dqxsb9 - Cantilever arms : approx. 120 cm - Axial dimension: 131 cm - NEW GOODS immediately from stock. - 675 kg load per arm - 2700 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 426 cm made of IPE180. - 16 x cantilever arms approx. 120 cm made of IPE 100 - incl. all necessary connecting elements and screws. Why BLT cantilever racking ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright base and upright back are welded together, providing additional safety and short assembly times because the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 3213,00 € net + legally valid value added tax. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: excellent (used), Year of construction: 2011, Cantilever rack, heavy-duty rack, single-sided cantilever rack, pallet rack Nkvaovh -Manufacturer: Bito,Cantilever rack one-sided, base field type KR29 L height 2480 mm -Cantilever arms: 6 levels / shelf height adjustable in 60 mm increments -Cantilever arm length: 600 mm -Load capacity per cantilever arm, max. 140 kg, see photo type plate -Dimensions: 1130/730/H2480 mm -Total weight: 100 kg

Condition: new, Year of construction: 2024, Functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, axle spacing: 1,030 mm, total width: 810 mm, total height: 2,500 mm, load capacity per stand: 560 kg, approx. 3.15 running meters. Cantilever shelf H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - incl. all necessary connecting elements and screws. -- Available immediately Price : 1525,00 € net 1814,75 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation : Tk7Ez7Fzq Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: excellent (used), Year of construction: 2013, Cantilever rack, heavy-duty rack, single-sided cantilever rack, pallet rack Plghgz00 --Manufacturer: Bito,Cantilever rack one-sided, 3 bays type S height 3220 mm -Stands: 4 pieces 3220/750/75 mm grid 60 mm adjustable -Cantilever arms: 28 pieces 630/40/120 mm usable depth 600 mm -Load capacity level: 1600 kg -Transport dimensions: 3220/800/H360 mm -Total weight: 350 kg

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 350 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm Tk2Jgsay3 - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 350 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2356.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: excellent (used), Year of construction: 2007, Cantilever racking, heavy-duty racking, single-sided cantilever racking, pallet racking -Manufacturer: Bito, cantilever rack double-sided 5 bays height 2500 mm -Stands: 6 pieces type 29.408 Load capacity: 3550 kg Compartment height adjustable in 60 mm increments -Cantilever arms: 72 pieces type S usable depth 600 mm Dppfkf -Number: 3x complete shelves available -Price: per piece -Dimensions: 2500/1350/H960 mm -Weight: 720 kg

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 400 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. Tk0Lm3Ois - Arms adjustable in 200 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 400 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2462.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Cantilever racking to your desired dimensions! Ideal for storing your long goods. Easy access to your products thanks to configurations that can be used on one or both sides. Expandable system that allows you to add elements as your requirements evolve. Perfect for offcuts or long goods in metal and wood businesses. Why BLT cantilever racking? Tkzntg2Yi - Certified German manufacturer DIN EN 1090 - Made in Germany- - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load! - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - We use the legally prescribed C4 load plates in accordance with DIN EN 15635 / BGR 234 - Long after-sales guarantee - The upright base and upright back are welded together, providing additional safety and short assembly times because the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the upright profile. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: new, Year of construction: 2024, Functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, axle spacing: 1,030 mm, total height: 2,500 mm, load capacity per stand: 1,120 kg, approx. 3.15 running meters Cantilever rack with shelves 60 cm deep H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - 12 x META shelf, approx. 100 x 60 cm - incl. all necessary connecting elements and screws. -- Available immediately Price : 1765,00 € net Dqxr9P 2100,35 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2020, Cantilever rack NEW Data : - H : approx. 416 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilever arms : approx. 120 cm - Axial dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 416 cm made of IPE160. Dqxr82 - 12 x cantilever arms approx. 120 cm made of IPE 80 - incl. all necessary connecting elements and screws. Why BLT cantilever racking ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright foot and upright back are welded together, providing additional safety and short assembly times, as the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 2578,00 € net + statutory value added tax. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 426 cm - D: approx. 137 cm - L: approx. 403 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 900 kg load per arm - 2700 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 426 cm made of IPE180. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: Tkr9F0Hvy €3031.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2024, Functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,000 mm, total length: 3,150 mm, axle spacing: 1,030 mm, total width: 810 mm, total height: 2,000 mm, load capacity per stand: 1,300 kg, approx. 3.15 running meters Cantilever rack with shelves 60 cm deep H: 200 cm 140 kg/arm META Multistrong Data : - H : approx. 200 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1300 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 200 cm made of IPE120. - 12 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - 09 x META shelf, approx. 100 x 60 cm. - incl. all necessary connecting elements and screws. -- Available immediately Price : 1449,00 € net 1724,31 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Dqxr7J Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.