Used Messersi Tch 1500 for sale (22,850)

Condition: good (used), workbench, work table, assembly bench, assembly table, work table -Workbench: with vice, solid construction with drawers -Worktop: 1500/715/H890 mm Kfsdpfewwg Ebjx Ah Usa -Drawer/door: lockable, without key -Vice: clamping jaws: 140 x 25 mm clamping width 230 mm -Transport dimensions: 1500/830/H1065 mm - Weight: 121 kg

Condition: good (used), Year of construction: 2012, Coolant Filtration System KNOLL KF 600 -1500 - CE marking - Coolant tank - Paper band filter Kfodpfjxrmzpox Ah Uoa - OP-3 control unit - Coolant pumps Dimensions: LxWxH 2.4x1.2x1.8 meters / Weight 800 kg Subject to errors and omissions.

Year of construction: 1987, condition: ready for operation (used), A conventional lead and feed screw lathe Nardini is available. Swing over bed/cross slide: 440mm/260mm, turning length: 1380mm, taper cylindricity over 100mm: 0.3mm, roundness: 0.03mm, runout: 0.03mm, squareness over 100mm: 0.05mm. An on-site inspection is possible. Kodpoxq Eyzjfx Ah Uofa

Condition: used, machine/vehicle number: 0257391, height of centers: 160 mm distance between centers: 1500 mm grinding wheel measures: 500 x 127 x 40 mm grinding wheel rotations: 1570/2050 Upm Kedpfxsgayiwe Ah Ujfa electrical connection: 380 V kW space needed: 4400/6400 x 2000 x 1400 mm weight: ca. 4000 kg

Condition: ready for operation (used), Year of construction: 2002, Extruders and oil screw presses for soybean processing, obtaining oil and soybean cake. There are two extruders and two presses. One extruder and one press work in tandem and form a pressing line. The motor power of the press is 22 kW and the power of the extruder is 55 kW. the capacity of one line is 500-800kg/h The price refers to one line (exstruder+press) Kfjdotxinaopfx Ah Usa

Condition: new, spindle bore: 105 mm, turning diameter: 500 mm, turning diameter over bed slide: 300 mm, turning length: 1,500 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 36 rpm, type of input current: three-phase, overall weight: 2,600 kg, three-jaw chuck diameter: 315 mm, New lathe with large bore. Brand: KMS Type: CS6250C TDC: 1500 mm Turning diameter over bed: Ø 500 mm Turning diameter over slide: Ø 300 mm Kfjdpjvxz R Nefx Ah Usa Turning diameter in pocket: Ø 710 mm Turning length in pocket: 240 mm Bed width: 390 mm Spindle passage: Ø 105 mm Spindle speeds: 12 (36 - 1600 rpm) Tailstock spindle diameter: 75 mm Tailstock range: 150 mm Tailstock mounting: MC5 Machine dimensions: ± 3132 x 975 x 1270 mm (L x W x H) Machine weight: ± 2600 kg Machine equipped with: - Longitudinal and cross feed. - Rapid traverse on longitudinal and cross feed. - Adjustable and movable stops for automatic longitudinal feed. - Thread cutting axis (cutting of Metric/Inch/Module/DP thread possible. - Quick-change tool holder. - 2-axis digital readout (Brand: Sino). - 3-jaw chuck Ø 315 mm, passage 100 mm (Camlock). - 4-jaw chuck Ø 400, passage 105 mm (Camlock). - Drive plate Ø 630 mm (Camlock). - Fixed steady rest Ø 120- Ø 260 mm. - Follow steady rest Ø 20 – Ø80 mm. - Coolant device.

Condition: excellent (used), Clamping plate, marking plate, measuring plate, measuring table, surface plate, marking plate Kjdpfswgdh Ejx Ah Uofa -Manufacturer: Stolle, clamping plate with support ribs -Length: 2005 mm -Width: 1500 mm -Plate thickness: 40 mm -Plate: with support ribs -Transport dimensions: 1500/2005/H500 mm -Weight: 1800 kg

Condition: excellent (used), Year of construction: 2011, Center height 330 mm Turning diameter over bed 660 mm turning diameter over support 430 mm center width 1500 mm bed width 400 mm spindle mounting DIN 55029 A 8 spindle bore 82 mm speed range, 3 steps 7 - 135, 30 - 550, 110 - 2200 rpm feed range X/Z 3000 / 6000 mm/min rapid traverse X/Z 4/8 m/min quill taper MK 5 Drive power approx. 9 kW dimensions L x W x H 3450 x 1750 x 1770 mm Ksdpel D Rddefx Ah Uofa Weight 2850 kg Accessories / special features: - Cycle control make FAGOR 8055-i A TC with TFT color screen. - Electronic handwheels - Interface - 4-fold tool turret, programmable change by motor drive - 3 jaw chucks make BISON, diameter 300 mm - full enclosure, sliding doors electrically protected - coolant system - air conditioning for the control cabinet - central lubrication - machine feet - lighting - CE conformity Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm Kfjdpfxora Rrhe Ah Usa table height 850 mm x-axis 550 mm travel R-axis +/- 50 weight ca. 3600 kg a lot of lower and upper tools incl. work light

Year of construction: 2006, condition: ready for operation (used), A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China. Kfedpfx Ahexf Ikls Uja

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW mains connection 400 Volt, 50 Hz Kfedpfel Nbqcox Ah Uja - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Year of construction: 2000, condition: good (used), Cieffe FNCm 2.5/0.8/1500 hardening furnace chamber furnace 1120 °C Manufacturer: Cieffe Type: FNCm 2.5/0.8/1500 Max temperature: 1120 °C Series: 4185/1B Rated current: 70A 37 kVA 400 Volt Year: 2000 Kfsdpfxonucguj Ah Uea Maße: Außen (L x B x H) 3000 x 1480 x 1750 mm Brennkammer (L x B x H) 2600 x 270 x 100 mm Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: used, Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Manufacturer: Rübenach, clamping plate: with support ribs on a solid base -Length: 2500mm -Width: 1500mm -Height: 835mm Kedpfjkrgimox Ah Usfa -Dimension: 2500/1500/H835 mm -Weight: 2440 kg

Condition: used, Workbench, work table, assembly bench, assembly table, work table Kfedpon Hbcrofx Ah Uja -Workbench: solid construction -Width: 1500mm -Depth: 700mm -Height: 840mm -Weight: 48 kg

Condition: used, Workbench, workbench, assembly bench, electrician's workbench -without: vice -with: electrician test board -Width: 1500 mm -Depth: 750 mm -Height: 800 mm -Number: 5x pieces available -Price: per piece -Weight: 100 kg Kjdpfxod S Unns Ah Ujfa

Condition: used, T-slot plate, clamping plate with T-slots, plate field, welding table, welding table -Dimensions: 1500/3510/H950 mm -Plate thickness: 20 mm -Plate is: with supporting ribs -1x T slot: 18 mm Kodpfx Ahscbtwdo Uefa -with: detachable stop -Weight: 2600 kg

Condition: used, Workbench, work table, assembly bench -Workbench: with drawers, solid construction Ksdpfx Ahomch T Te Ujfa -Width: 1500mm -Depth: 700mm -Height: 880mm -Drawers/cabinet doors: each 2x, lockable/without lock -Number: 1x workbench available -Price per piece -Weight: 110 kg/pc.

Condition: used, Workbench, work table, assembly bench, assembly table, work table -Workbench: solid construction -Width: 1500mm -Depth: 700mm -Height: 855mm Kjden Hbcvjpfx Ah Ujfa -Weight: 75 kg

Condition: used, T-slot plate, clamping plate with T-slots, plate field, welding table, welding table -Dimensions: 1500/3516/H260 mm -Plate thickness: 30 mm Ksdpfxjcbqqis Ah Uofa -Plate is: with supporting ribs -1x T slot: 17 mm -Weight: 1800 kg

Condition: used, Workbench, work table, assembly bench -Width: 1500 mm -Depth: 700 mm Kfedpod Rbtrefx Ah Uoa -Height: 840 mm -Work top thickness: 40 mm -Lockable drawer: 1 -Weight: 74 kg

Condition: used, Workbench, work table, assembly bench -Width: 1500 mm -Depth: 710 mm Ksdpfxsd R N H Sj Ah Ujfa -Height: 890 mm -Thick worktop: 50 mm -Drawer: 1 -Door: 1 -Trays: 4 -Weight: 103 kg

Condition: used, Clamping plate, welding table, welding table, straightening plate -Mounting plate: steel , with a vice -Width: 1500 mm -Length: 2005 mm -Height: 845 mm -Plate thickness: 45 mm -Plate: is on steel frame -Vise: clamping jaws 110 x 15 mm -Transport dimensions: 1525/2230/H990 mm Kodpfxoft Tcie Ah Uefa -Weight: 1250 kg

Condition: used, Clamping plate with T-slots, tensioning aid, plate field, welding table, welding table, plate boring machine -Width: 200 mm -Length: 1500 mm -Height: 40 mm Kfjdpfx Aed N Hznoh Uja -Groove width: 14 mm -Weight: 80 kg

Condition: used, Clamping plate, welding table, welding table, straightening plate Kfodpfx Asb Hzggsh Uea -Width: 1500 mm -Length: 1500 mm -Height: 125 mm -Surface: good -Holes: Ø 50 mm -Transport dimensions: 1500/1500/H125 mm -Weight: 1500 kg

Condition: used, Commission trolleys, rack trolleys, paint drying trolleys, specialist transport trolleys, transport trolleys, window profile trolleys -Total length: 1500 mm -Total depth: 450 mm -Total height: 1530 mm -Arm length: 250 mm -Intermediate dimension: 26 mm -Number: 4x cars available -Price: per piece -Weight: 50 kg/piece Kfedpfjb Uvtrox Ah Uoa