Used Michael Relay for sale (661)

Condition: used, Programmable AC Power Source Voltage Regulator Laboratory power supply, power supply, Programmable AC Power Source CHROMA Type 6415 : 64150296 Year of manufacture approx. 2000 Input values: Input voltage: 190 ~ 250 Volts AC Input frequency: 47-63 Hz Input current: max. 12 Amps Output values: Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency: 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation: 0.1% Output frequency: 45 - 1000 Hz Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output isolation relay Nedpfx Afedz Srajwjda - EEPROM memory for user-defined voltage and frequency combinations for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short-circuit protection - Temperature-controlled fan speed - Self-test on power-up - Condition as shown, without additional accessories and connection cables Additional connections: - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) Dimensions H x W x D 221.5 x 425 x 567 mm Weight: 23 kg Good condition

Condition: excellent (used), Kontron 325 Tenary Low-Pressure Gradient Pump HPLC up to 10 mL - Pump system for tenary low-pressure gradients - All low-pressure gradient devices integrated into one solution system - 10 programs with customized instructions - Column shock protection extends shelf life - Intelligent compressibility compensation Nodpfelkbptox Afwoda - Stackable with other/additional HPLC modules - Full control of the AUtosampler 360 via the keypad with a display Type: Double series-piston wetted Materials: SS 316, PTFE, KEL-F, ceramic, ruby, and sapphire Flow rate: 0.05 to 10 mL per minute Flow rate precision: 0.3% RSD (at 1.5 mL/min) Flow rate accuracy: 2% (at 1.5 mL/min) Flow linearity: r2 > 0.998 Pressure: 40 MPa or 7500 psi (flow-dependent) Pressure sensor: Piezoelectric sensor Display: 2x40-character LCD External control: RS-232C Inputs: Injection synchronization, flow stop Outputs: Pressure and drive alarm, pressure signal, relay injection, relay step, RS-232 (for Autosample 360) Power supply: 110/220 V +-10%, 50/60 Hz, 120 VA Dimensions: 40 cm wide, 54 cm deep, and 17 cm high Find more items - new and used - in our shop! International shipping costs upon request!

Year of construction: 2005, condition: good (used), Schrack 300 kvar Reactive power compensation equipment Manufacturer: Schrack Energietechnik Type: KRSMO-P-TS-25/12 Fi 7% Nominal power: 300 kvar Rated voltage: 400 V Nominal frequency: 50 Hz Rated current: 432 A Reactive power control relay: Frako RM9612 Ndedpfxjk D Dxbj Afwsa Rittal electrical switch cabinet: Freestanding with built-in fan. Manufacturer: Rittal Type: TS8806 Dimensions: 610x830x2000 mm

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW medium: oil up to 350°C Maximum external volume: 66 ltr at 350°C max. flow rate: up to 150 l/min  max. delivery pressure: up to 8,0 bar Motor power: 2.8 or 4 kW Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Weight approx. 225-320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Regulation and control unit Smart Controller (7" Touch-Displ) -Heating control via solid-state relay -Control box IP54 -Cooling controlled via solenoid valve -Flow measurement using the differential pressure principle -Bypass between flow and return with reduced cross-section -Level monitoring by means of magnetic float switch -flow monitoring by recording the heating rod surface temperature and the flow rate -dirt filter in the cooling water supply and in the return of the circulation system -monitoring of the flow temperature by electronic safety temperature limiter -external oil filler neck -Dilo fittings on internal piping connections (except pump connections) -at 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanketing with pressure gauge and safety valve 0.5 bar at 350°C (option) Visit our website for more details or for other performance classes. Njdpfx Ajg Ey Rfofweda *Unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be stated in quotations or order confirmations.

Condition: used, Technical details: dimensions electric cabinet LxWxH: 1,6x0,6x2,0 m connected load: 2x11 kW connected load: 2x15 kW electric cabinet - revolution regulator application: - pump - rack system with stepless rpm adjustment application area: - heating/air conditioning /climate , water supply , heat exchanger , recycling plants , fountains , pump drive via AC motor - control device 89 MA relais output 220V / 1A - display via control unit with micro computer - equipped with differential pressure indicator i.D. Ndsdpfju N Eytox Afwea *

Condition: new, PROTON P-V LINE  PROTON equipment offers the right solution to recovering and conveying of blast medias, powders, plastic pellets, grains, sands, aggregates and other bulk metarials in both cleanup and material transfer functions. The main type of industry using our equipments are blast cleaning companies, shipyards, tank cleaning companies, metallurgical plants and steel mills, foundries, power plants, cement industries, chemical industries etc..   The dust in the air is collected by a Vacuum Cleaner and the grit in the Stock Silo by its separator. Especially in inaccessable or enclosed areas such as storage tanks, box girder constructions, tank internals at shipyards etc., the equipment offers great savings in time and manpower.  A PROTON Vacuum system cuts costs by reducing cleanup time and reclaiming valuable materials.  This versatile vacuum system can be used to pick up any material that will flow through a hose.  With its long reach and powerful suction, PROTON cleans out tanks, pipes. There are 2 types of stock silos, Cylindrical and Square, having 2 floors. Technical Specifications for standard machines: Nodpfx Afeghbkyjwoda VC Unit’s cost-cutting power has been proven hundreds of times. In fact, most VC units pay for themselves in less than 3 months through reduced labour costs and reclaimed materials. Units are available with capacities up to twelve tons per hour, conveying distances up to 330’’(100m),and motors with 7,5 kW-90 kW (3,98m³/min-72m³/min). Performance data for air (p₁=1,0 bar, t₁=20 °C, ρ=1,2 kg/m³) The heart of the PROTON VC is a very robust AERZEN blower made in GERMANY. All sets include the following equipment: - Suction Hose (rubber-wired) - Suction Hose for connection between Vacuum Unit and Hopper - Suction Nozzle - Cam-lock and clamp Connections - Cartridge Filter (spare) - Oil for Blower (spare) - Manometer (spare) - Phase Protection Relay - all necessary fasteners

Condition: new, *Technical Specification: device type: 6/95 heating capacity: 6 kW cooling capacity: 45 kW Medium: water up to 95°C maximum external volume: 50 ltr at 95°C *Equipment hydraulic: - Cooling and filling controlled by solenoid valve - Automatic from cooling water or manual filling (at filling nozzle/option) - Level monitoring by magnet float-switch - Dirt trap in from process line of circulating system and cooling water inlet - Pump reversing for leak-stop operation - Manual mould draining via leak-stop operation and venting by tap at backside of unit - Filling time monitoring and aquatimer - Cool down mode (temperature adjustable) - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow metering *Equipment electrical: - Controller SBCmini, with relay for collective alarm 230V switchable, on the back of controller on terminal - Heating control by SSR - Control cabinet IP54 - Interface 20mA TTY; pinning Arburg - Cekon plug 16A *General equipment: - Corrosion resistant components (stainless stell, brass) - Heating rod made of Incoloy - Unit mounted on rolls, two pieces steerable with break - Additional temperature fuse for safe heating switch-off by contactor *Cooling: Power: 45 kW (stainless steel plate heat exchanger) Ndodpfofnvviex Afwea Cooling water connection: Socket G3/8" IG (Performance data at 80°C flow and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of 3 bar) *Pump: Type: T401 Output rate (max): 40 ltr/min Pressure (max): 3,8 bar Motor capacity: 0,5 kW Construction: submersible pump / peripheral wheel *Dimensions/Weights/Colours Dimensions L/W/H: 514 mm x 238 mm x 493 mm (w/o conne.) Weight: approx. 30 kg Colour: Case: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulating medium int. thread G1/2" Cooling water int. thread G3/8" Filling (option) *This unit complies to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment; customer requests deviating from the standard will be indicated in offers or order confirmations.

Condition: repair required (used), Year of construction: 1989, functionality: limited functionality, !!! SPECIAL OFFER!!! For sale are 2 active milling machines of the brand Hermle and the type UWF 801 Ndsdpfst Ifm Nex Afwsa Price for both machines in a package One machine has an error when moving in Y, the 2nd machine is missing relays. The idea would be to make one machine out of 2. The value of a functional machine would be approx. 10,000 € What makes the machine special is its active control, which allows it to set feeds that stop at a predetermined level. The machine is easy to operate and yet efficient, which makes it ideal for the do-it-yourselfer but also for industry. x-travel: 500 mm y-travel: 430 mm z-travel: 400 mm Spindle holder ISO: SK40 Control: TNC 114 Spindle head swivels left and right: right/left = 90° ° Vertical quill stroke: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed rate:: X+Y: 4 - 1600 steples mm/min Feed rate:: Z: 4 - 1000 steples mm/min Rapid traverse: X+Y: 1.6 iand Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Weight approx.: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Chip collection tray Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Demo system AccurioPress C7090 Very low print count, as it was only used for presentations. Njdpjxgqptjfx Afwsda Counter reading available upon request. Configuration can be customized as desired. As pictured: C7090 with KM Controller IC-609 incl. UK-220 (APPE) PF-713 vacuum paper feed with scanning unit RU-518 relay unit (cooling/smoothing unit) IQ-501 with VI-515 FS-541 stapling finisher with banner output Sale/rental exclusively within Germany! Price upon request! Unfortunately, we regret to inform you that we do not conduct sales outside of Germany. We kindly ask for your understanding in this matter and request that you refrain from making further inquiries regarding this issue.

Condition: ready for operation (used), Year of construction: 2001, Model SCM RECORD-130 TV Year of manufacture: 2001 Work table: 2930 x 1245 Ndedpjzmmmbsfx Afwea Spindle: HSK63F, 11 kW Vector axis Laser for positioning the suction cups 4x lifting devices Conveyor belt for chips 12x tool changer Milling spindle for lock case or saw F18 drilling head Clamping devices

Condition: good (used), Year of construction: 1998, total length: 52,000 mm, total height: 17,000 mm, total width: 20,000 mm, overall weight: 1,600 kg, GHD Hartmann GBK-420 Bread packing machine Ndjdpetryd Aofx Afwsa Capacity- up to 60 pcs/min, product depended Condition – As seen in video, good, maintained. Inverters, safty relays, additional electrical componenets were recently replaced. Products: Whole breads, not sliced, Length: up to 400 mm, Width: up to 260 mm, Height: up to 170 mm Can also pack connected burger buns. upto 120mm

Condition: new, Year of construction: 2025, New machine Year of manufacture 2025 Equipment and technical data: · Wheel diameter: 600 mm · Belt speed: 1550 m/min · Cutting height: 400 mm Nodpovymg Eofx Afwsda · Cutting width: 580 mm · Blade length max.: 4735 mm · Saw blade width min. / max.: 15 mm / 30 mm · Optional with special covering saw blade width min. / max.: 8 mm / 25 mm · Table size: 810 x 590 mm · Table height: 920 mm · Extraction nozzle: 2 x Ø 100 mm · Motor power: 2.2 kW / 3 HP · Voltage: 400 V / 50 Hz · Color: RAL 7035 light gray and RAL 5000 violet blue · Net weight: approx. 275 kg TECHNICAL DESCRIPTION · Solid German mechanical engineering · Machine stand in an attractive, modern, torsion-free double-chamber welded steel construction · Upper and lower doors secured by limit switches · Upper and lower precision band saw blade guide APA 2, size. 2 · Finely planed gray cast iron table · Swiveling table top up to 45° · Dynamically balanced band saw wheels with vulcanized rubber bandages · Stop ruler can be used to the left of the saw blade, stop profile can be folded over · Blade tension indicator · 1 saw blade 4735 x 25 x 0.6 mm, tooth width 9 mm, No. 3780.250D · Mechanical height adjustment of the saw blade guard using a handwheel with locking pinion · From 2.2 kW - rotary cam switch with direct start and emergency stop button · From 3.0 kW - rotary cam switch with star-delta start and emergency stop button · Mechanical motor brake with main switch and motor protection relay · CE-compliant Availability: short term Storage location: Flörsheim

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Ndjdpfx Asww Ravofwoa TECHNICAL DATA Wheel diameter: 800 mm Belt speed: 1800 m/min Cutting height: 520 mm Cutting width: 780 mm Max. blade length: 5775 mm Min./max. blade width: 15 mm / 40 mm With special lining (optional), min./max. blade width: 10 mm / 35 mm Table size: 1145 x 760 mm Table height: 930 mm Extraction port: 2 x Ø 120 mm Motor power: 4 kW / 5.5 HP Voltage: 400 V / 50 Hz Color: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 525 kg TECHNICAL DESCRIPTION Robust German engineering Machine frame in a modern, visually appealing, torsion-free double chamber steel welded construction Upper and lower doors protected by limit switches Upper and lower precision bandsaw blade guides APA 2, Size 2 Finely planed cast-iron table Table can be tilted up to 45° Dynamically balanced bandsaw wheels with vulcanized rubber tyres Rip fence can be used on the left of the saw blade, fence profile can be folded down Blade tension indicator 1 bandsaw blade 5775 x 30 x 0.8 mm, tooth pitch 9 mm, No. 3780.30I Mechanical height adjustment of blade guard by handwheel with locking ratchet Cam switch with star-delta starting and emergency stop button Mechanical motor brake with main switch and motor protection relay CE compliant GS tested Machine frame, left-hand version Drive motor: 4.0 kW / 5.5 HP Push-button control, 3 to 4 kW With automatic star-delta start (for 3.0 – 4.0 kW motor), (instead of cam switch) Availability: Short-term Location: Flörsheim

Condition: used, functionality: fully functional, machine/vehicle number: E4F8F4, For sale: National Instruments PXI-6238 Bank-Isolated Multifunction DAQ Module, in fully working condition. Manufacturer: National Instruments (NI) Model: PXI-6238 Condition: Used – Fully Tested and Working Tested: NI MAX – operational functionality verified Analog inputs: 16 AI (16-bit, 1.25 MS/s), ±20 mA Analog outputs: 2 AO Digital inputs: 6 DI Digital outputs: 4 DO Counters: Two 32-bit counter/timers Isolation: Bank-isolated Interface: PXI / PXI Express hybrid-slot compatible Ndedpfx Afozh Ip Hewoa Tested with NI MAX software and confirmed to be fully functional. Ideal for reading encoders, flow meters, and proximity sensors, as well as controlling valves, pumps, and relays in high-voltage and electrically noisy industrial environments. Removed from a working industrial environment; no faults found. Shipping from Hungary. International shipping available. Carefully packaged with antistatic protection.

Condition: used, mileage: 52,050 km, power: 120 kW (163.15 HP), first registration: 10/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 6, total length: 5,932 mm, total width: 2,020 mm, total height: 2,620 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Internal vehicle number: 2327X ----Why autonext? Over 400 immediately available cars & commercial vehicles. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually – top customer ratings. Attractive financing & trade-in options available. Complete vehicle selection on autonext. Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Top condition! 1st owner, German vehicle, non-smoking vehicle Complete service history, exclusively at Mercedes Benz Next service in 217 days New front and rear brakes Mixto Number of seats: 6 Workshop "Bott" with workbench and shelving systems Trailer hitch, increased trailer load 3,500 kg Parking package with reversing camera Multimedia system MBUX (touchscreen 7") Speed control system (cruise control) Regulated air conditioning (Tempmatik) Auxiliary heating (electric air and hot water heating) 230V socket in the cab Parameterizable special module Theft alarm system Heated seats for driver and front passenger ---- Special features: * Multimedia system MBUX (touchscreen 7") * Hands-free system Bluetooth * Multifunction steering wheel * Parking package with reversing camera * Reversing camera * 2nd battery (additional battery) inside * Airbag passenger side * Hill-start assist * Trailer socket 13-pin * Armrest, driver and front passenger door * Body type: station wagon * DAB tuner (digital radio reception) * Roof lining * Interior light in the cargo area with door contact * Theft alarm system Ndsdeycnv Repfx Afwsa * AdBlue filler neck, lockable * Entry handle on the rear pillar, left rear * Entry handle on the rear pillar, right rear * Tachograph operation in front under the headliner * Suspension: Stabilization Level II * Window in the cargo/passenger compartment: - fixed, front left * Window in the cargo/passenger compartment: - sliding, front right * Vehicle without lowering * Vehicle without start/stop system * Speed control system (cruise control) * Rear door (opening angle 270 degrees) * Wooden floor in the cargo area * Connection strip for electrical connections (driver's seat box) * Regulated air conditioning (Tempmatik) * Cargo area bulkhead between C-pillars * Cable duct on the rear portal * Cable duct on the side wall * Marker lights on the side * Parameterizable special module * Crossmember with integrated step * Spare wheel in driving condition * Spare wheel holder under the frame end incl. jack * Windscreen wiper with rain sensor * Off-road suspension * Mud flaps rear * Mud flaps front * Safety belt system with warning system (passenger side) * Seats in the cab: double passenger seat * Seats in the cab: heated passenger seat * Seats in the cab: heated driver's seat * Seats in the cab: driver's seat comfort * Seats in the cab: driver's seat with lumbar support * Seats in the cargo/passenger compartment: 1st row, 3-seater bench, narrow * Socket (12V connection) in the cab * 230V socket in the cab * Separation relay for additional battery * Paneling in the cargo/passenger compartment: high plastic (up to the roof) * Fleece battery 92 Ah * Front axle reinforced * Preparation for tachograph * Thermal insulation driver cabin * Thermal insulation cargo/passenger compartment * Heat protection glazing (windshield with band filter above)

Condition: new, Year of construction: 2023, Transformer substation, concrete construction, UF2742 Dimensions (L × W × H): 2.70 m × 4.18 m × 3.32 m Medium-voltage switchgear, Siemens 8DJH type • 2 ring cable feeder bays • Auxiliary switch • Short-circuit indicator • Capacitive voltage indication system • 1 transformer feeder bay • Auxiliary switch Ndodpoznmuhofx Afwoa • Overcurrent and earth-fault protection with WIC relay • Capacitive voltage indication system Three-phase oil transformer • Type: SBG • Power: 1,250 kVA • Hermetically sealed design

Condition: used, Year of construction: 2023, ---- Demonstration unit A total of 3 units available: AC generator QAS30 KD S5 50Hz 400V3PH EQ: 100583713 Serial No.: ESF373329 Year of manufacture: 2023 AC generator QAS30 KD S5 50Hz 400V3PH EQ: 100583714 Serial No.: ESF373330 Year of manufacture: 2023 Equipment: Language pack 3 EN+DE+NL+FR+IT 5-pole sockets 63 A ELP-B 32?16 A + DS DS-RIM 3P 16A Insulation monitoring relay Ndodpfx Aszkz Diofwoa Battery disconnect switch Operating manual, German

Condition: used, mileage: 20,699 km, power: 174 kW (236.57 HP), first registration: 02/2025, fuel type: diesel, overall weight: 3,100 kg, color: white, gearing type: automatic, number of seats: 4, total length: 5,140 mm, total height: 1,980 mm, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal Vehicle No.: 95691A Equipment lines and packages * Aerodynamics package * Acoustics package * AMG Line * Version: Marco Polo * Equipment package: Premium * Driving Assistance Package * Parking package with 360° camera * Mirror package * Winter package Njdpfxezag T Ne Afwoda Exterior * 12V socket in the driver's cab * Active sliding door lock * Towing capacity 2500 kg * Trailer coupling: ball head, removable * Drive type: rear-wheel drive * Pop-top roof painted in vehicle color * Exterior mirrors, electrically foldable * Exterior mirrors, electrically adjustable and heated, both sides * Exterior mirrors with integrated turn signal * Exterior mirrors with blind spot assist * Exterior mirrors with ambient lighting * Additional battery (reinforced) * Brake calipers with lettering (Mercedes-Benz) * Camping table and chairs * AMG roof edge spoiler * Third brake light * EASY PACK package - electric sliding door/tailgate * Door sill strips with Mercedes-Benz lettering (illuminated) * Windows in the cargo/passenger compartment: - can be opened at the rear right, fixed on the left * Windows in the cargo/passenger compartment: - fixed, front right * Windows in the cargo/passenger compartment: - sliding, front left * Fly screen for sliding windows * Front opening of the pop-top roof (bellows) * Rear lights LED * Rear window can be opened * Body/superstructure: motor caravan * Body variant: pop-top roof * Fuel tank: 70 liters * Fuel tank with anti-siphoning device * Radiator grille with LED light bar * Light alloy wheels 8x19 (AMG, 5-twin-spoke, black) * Awning, side, passenger side (housing black) * Metallic paint * Multibeam LED including high beam assist Plus * Wheelbase 3200 mm * Heated windshield washer system * Sliding door, cargo/passenger compartment, right * Sliding door, right, electric * Bumpers and attachments painted in vehicle color * Separating relay for additional battery * Ambient lighting in tailgate * Permissible total weight 3.10 t Interior * Storage net on the back of the left front seat * Storage net on the back of the right front seat * Ambient lighting (64 colors) cockpit and rear / complete * Ambient lighting, passenger compartment * Dashboard lower part, black * Outside temperature display * Floor covering: carpet in the driver's cab * Roof bed * Headliner / interior roof lining, fabric, black * Entry handle at the rear * Entry lights * Electric windows with comfort closing function * Floor mats, driver's cab: velour, AMG * Cupholders, rear * Interior trim: decorative elements, wood-look, olive * Interior mirror, digital (camera system, can be switched off) * Air conditioning, controlled (Tempmatik) * Automatic climate control, rear (Tempmatik) * Head/side airbag system (window bag) * Steering wheel (leather) * Center console with storage compartment and cupholder * Seat equipment: quick-release mechanism for seat rail system * Seat upholstery / covering: fabric, Santos * Seats in the driver's cab: passenger seat, heated * Seats in the driver's cab: passenger seat, comfort, swiveling, 1 armrest * Seats in the driver's cab: passenger seat with lumbar support * Seats in the driver's cab: passenger seat with seat depth adjustment * Seats in the driver's cab: driver's seat, heated * Seats in the driver's cab: driver's seat, comfort, swiveling, 1 armrest * Seats in the driver's cab: driver's seat with lumbar support * Seats in the driver's cab: driver's seat with seat depth adjustment * Sun visors with mirror (illuminated) * Sports pedals,

Year of construction: 2010, operating hours: 8 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 9587-00-001, Equipment: CE marking, Dear Sir/Madam, I am contacting you because I have a Derrick Corporation DE-1000 GBD industrial centrifuge available for sale. The machine is currently located in Douala, Cameroon. It is a genuine Derrick Corporation centrifuge and is available for inspection and purchase by a serious buyer. Equipment details: Manufacturer: Derrick Corporation, Buffalo, New York, USA Model: DE-1000 GBD Part No.: 9587-00-001 Drawing No.: 13744-01 Customer ID: UNIT#0F001322 Serial No.: CENT-1322 Condition: Used, good condition Location: Douala, Cameroon I am looking for a serious international buyer, dealer, equipment reseller, or industrial company interested in purchasing this centrifuge. I can provide: Additional photos Videos of the machine Technical information Details about inspection and shipping from Cameroon Please let me know if your company is interested in buying this machine or making an offer. Ndedpezqy Itefx Afwsa I look forward to hearing from you. Best regards, Michael Chirac 📍 Douala, Cameroon

Year of construction: 1980, condition: excellent (used), 1 drilling beam 21 drill bits, grid system 32 mm Ndodpfofhn Irjx Afwsa max. travel range of the drilling beam min. 22 mm to max. 624 mm row spacing min. 125 mm, max. 603 mm (drilling line) Motor: 4.4 kW drilling stroke: 98 mm oil brake cylinder with a stroke of 70 mm operating pressure: approx. 6.0 bar air consumption: approx. 3 l/cycle travel range from min. 20 mm to max. 650 mm Weight: approx. 540 kg Dimensions: 2500 x 1100 x 1700 mm The machine will be refurbished and its functionality will be tested. Condition: very good.

Condition: used, mileage: 58,004 km, power: 125 kW (169.95 HP), first registration: 05/2025, fuel type: diesel, empty load weight: 2,635 kg, maximum load weight: 865 kg, overall weight: 3,500 kg, wheelbase: 4,325 mm, fuel: diesel, color: white, gearing type: mechanical, suspension: other, number of seats: 3, total length: 7,000 mm, loading space length: 4,370 mm, loading space width: 2,100 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), onboard computer, soot filter, traction control, Disc brakes, double passenger seat, interior trim, wooden load floor, extra-long, tailgate lift, touchscreen, heat-insulating glass, clock & tachometer, brake pad indicator, 2-door, 1st owner, Euro6e, green environmental badge (4), Apple CarPlay, Android Auto, steel rims, puncture repair kit, rear view camera, black, 6-speed gearbox, passenger airbag, navigation with color monitor, color monitor for navigation system, parking assist camera, electric windows, 2-way, seat heating, radio/MP3, outside temperature display, heated exterior mirrors, power steering, electric exterior mirrors, brake assist, speed limiter, comfort seats, roof spoiler, rear-wheel drive, center armrest, German version, further equipment available, errors and prior sale excepted, trade-in possible, financing possible, please contact us, we will create a customized offer for you. 502 Digital extra: updates for intelligent speed assistant, A5 front axle with increased load capacity, A axle ratio i = 3.923, B25 parking brake, electric, BA3 active brake assist, C6L multifunction steering wheel, CB7 stabilization level I, CL1 steering wheel adjustable in height and inclination, CT1 vibration damper, E07 hill start assist, E1D digital radio (DAB), E1E digital extra: hard drive navigation, E1U USB socket 5 V, E2A connection for special signals in the cockpit, E2I additional battery for retrofitted consumers, interior, E30 battery main switch, single-pole, E36 separating relay for additional battery, E46 socket in the driver's cab, E4S digital extra: smartphone integration, E57 electrical system for trailer socket, E7M MBUX multimedia system, ED4 fleece battery 12 V 92 Ah, ED8 pre-wiring, electrical system, parameterizable special module, EK1 terminal block for electrical connection, ES0 jump start - contact, ES5 charging package, dashboard, EV3 pre-wiring, electrical equipment for tailgate lift, EW6 digital extra: Remote Services Plus, EY2 digital extra: Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 breakdown management, F2W winter package, F68 exterior mirrors, heated and electrically adjustable, FF5A. Nsdpfezlt A Hox Afwjda

Condition: new, Core Drive Specifications NXI: NX Inverter Unit. It is designed to be fed by a shared, common DC bus arrangement rather than direct AC mains input. 0072: 72 Amps Nominal Current Rating.Low Overload (Pumps/Fans): Continuous maximum output of 72 A. High Overload (Heavy Duty): Continuous maximum output of 61 A. 5: Mains Voltage Class. Rated for 380 V to 500 V AC grid systems (which corresponds to a DC bus voltage range of 465 V to 800 V DC). A: Includes the Standard Alpha-numeric Control Keypad. 5: IP54 (NEMA 12) Enclosure Class. This offers strong, dust-protected, splash-resistant defense for hash operational environments. T: Standard EMC Emission Level adhering to the IEC61800-3 specification for IT networks. 0: No integrated brake chopper. C: Physical frame generation / module sizing designated as Frame FR7. Internal Hardware & Control Boards (SVA1AF00000) Nsdpfxey Ud Afo Afwoda The suffix code segment details the exact internal logic, system software, and factory expansion board routing layout: S: Air-cooled design system. V: Internal coating option. It features varnished/coated circuit boards for moisture and corrosive air resilience. A: Standard Vacon System Interface architecture setup. 1AF00000: This sequence identifies the specific hardware configuration across the control expansion slots (A, B, C, D, and E):A1: OPT-A1 Basic I/O Board installed in Slot A. It provides 6 digital inputs, 1 digital output, 2 analog inputs, 1 analog output, +10V reference voltage, and a +24V auxiliary supply. AF: OPT-AF Dual Relay Output Board installed in Slot B. It provides 2 programmable changeover relay outputs (NO/NC configuration). 00000: Slots C, D, and E are left empty from the factory, giving you expansion headroom for fieldbus communications (such as Profinet or EtherCAT) if needed Brand new never used. Please check out our other listings as well.

Condition: used, mileage: 201,000 km, power: 103 kW (140.04 HP), first registration: 10/2016, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 2,650 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Special equipment: Euro 5 without AdBlue! Second battery, RSD 2000 audio system (front speakers), exterior mirrors electrically adjustable and heated, main battery disconnect switch, rear roof-mounted indicator lights, entry handle on rear left D-pillar, driver assistance system: front and rear parking sensors, adjustable steering column (steering wheel), tire pressure monitoring system, full-size spare wheel, front and rear mud flaps, driver’s side front side airbag, cab seats: air-suspended driver’s seat, integrated rear step in the bumper, auxiliary hot water heater with programmable parking heater function. Further equipment: Loading area dimensions: Length: 2,600 mm, Width before wheel arches: 1,780 mm, Width between wheel arches: 1,350 mm, Height: 1,650 mm, Floor to loading area height: 670 mm, Luggage compartment volume: 7,500 l, and manufacturer’s specifications: in-house production! - 2 additional vehicle keys with remote control - Second battery with isolation relay, maintenance-free (100 Ah/450 A) - Armrest for left front seat - Electrically adjustable and heated exterior mirrors - Main battery disconnect switch - Onboard tools and jack - Rear roof marker lights, right and left - Entry handles on the rear D-pillars, left and right - All-season tires - Steering column adjustable axially and vertically - ParkPilot, front and rear - Price adjustment - Radio "RSD 2000" (2-DIN) with 4.3" monochrome display, front speakers Nsdpfjxzl S Ssx Afwjda - Radio preparation with front speakers - Tire pressure monitoring system - Standard spare wheel holder - Rear mud flaps - Front mud flaps - Front and rear mud flaps - Driver’s side side airbag - Seat cushion tilt adjustment in 1st row - Steel spare wheel (full size) - Rear step integrated into the bumper - Additional water heater (5 kW) with programmable parking heater function Service recently performed in April '24 Storage: tray/flat compartment above windshield, driver’s side airbag, traction control (ASR), version: BlueMotion Technology, entry handle on rear right D-pillar, driver assistance system: brake assist (HBA), rear wing doors without windows, body/configuration: panel van, body variant: standard roof, fuel tank: 75 liters, high solid partition without window, facelift model, engine 2.0 l – 103 kW TDI, parking light circuit, wheelbase 3,250 mm, low-emission according to Euro 5 emissions standard, sliding door, loading/passenger area right, seat upholstery: fabric, front stabilizer, gross vehicle weight rating 3.5 t, additional brake light.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Nedoznkx Dspfx Afweda Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, KRÜSI chalet building machine / log house production line type CM 40 Year of construction 2002 Krüsi CM40, consisting of the following components: Circular saw ( cross-cut saw ) Horizontal and vertical log house router Groove milling machine (horizontal) boring mill Infeed table 6m Outfeed table 6 m KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 CE-marked Ie Dkovfv Tfjk Ddfetk Condition: good, technically checked and cleaned / ready for use Functional principle Processing of wood for chalet construction / log house construction The beams can be processed in a single operation - Cutting to length - Horizontal and vertical milling of necks / grooves in one clamping operation - Drilling - Milling the face grooves Workpiece: - Cutting height max. 200mm - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for maximum machining accuracy. Slide guidance with dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for use, with contactor control, motors protected by thermal relay. Electrical equipment for voltage 380 V, 50 Hz, with protective covers, Central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed, electrically controlled, Ndodpfx Afjzvrf Iswsa together with the start-up of the milling motors. Rapid traverse and feed infinitely variable. Fully wired and installed, including air maintenance unit. Patches with a thickness of more than 14 cm must be processed in two tensions. Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analog dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide-tipped with cutting depth limiter (synchronous operation) Adjustable riving knife Motor speed min. 1 / 2900 Power kW 2.2 2nd CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal trimming unit Milling cutter Ø 180mm Milling cutter width max.130mm From cutter width 60 mm only use aluminum alloy cutters with reversible cutting edges 2 hydropneumatic feed motors kW 2.2 each Hydropneumatic feed Rapid traverse and work feed infinitely adjustable 3rd drilling unit: Manual feed Spindle adjustment with analog dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1.8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Cutter Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3.0 2 V-belts SPZ 9.5x1000 La Pneumatic Operating pressure on site min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr