Used Conveyor Used for sale (58,668)

Condition: used, New: No Empty weight: 1.000 kg Part suitable for: trucks Occ lot diverse rubber transportbanden Verschillende breedtes 79, 100 en 110cm Gedpfoxh El Sox Ag Njuh Article nr.: Z99999077-veiling Used lot of various rubber conveyor belts

Condition: used, Conveyor belt size 1500×80 cm, with wheel support and speed variator, used. Gujdjpmd D Depfx Ag Neh

Condition: good (used), We have a large number of used conveyor belts for sale. Belt width: 500 mm Total width: 620 mm Manufacturer: Vanderlande Price per linear meter: €300 Drive module: €1,500 Please contact us if you are interested. Gusdpfoiyp H Uex Ag Noh Other dimensions are available. Please inquire.

Condition: used, Name: Spiral conveyor with spiral Manufacturer: PURATEX Anlagetechnik GmbH Type: SS D 280 R / 6150 Guodpfx Ajrpmgfjg Neh Year built: 2008 Speed: 28 rpm Trough diameter: 280 mm Conveying length: 6150 mm Screw diameter: 240 mm Conveying / dosing of: Sewage sludge or similar sludge Driving force: 3 kW Flow rate: 3 kW Dimensions: L 6.600 x W 400 x H 1.600 mm Empty weight: 800 kg Technical doc.: Yes Message: Trough made of stainless steel and spiral made of normal steel, Pitch angle 22°, Throughput of sewage sludge 1.5 - 2.0 m3 /h Accessories: Slewing ring (swivelling) Condition: Second hand Price: On demand

Condition: like new (used), Conveyor to take product from 3.25m down to 0.8m. 762mm belt width. Gusdpfjwac D Sjx Ag Njh

Condition: excellent (used), Year of construction: 2022, operating hours: 413 h, functionality: fully functional, machine/vehicle number: 3126137, SPECIFICATION Swing over cross slide 419mm Maximum cutting diameter 305mm Maximum cutting length 305mm Spindle nose A2-5 Spindle bore 58.7mm Bar capacity 44mm Maximum spindle speed 6000rpm Spindle motor power 11.2kW Number of turret tool station 12 Guedpfxjxm U Sxe Ag Njh X axis travel 200mm Z axis travel 406mm Rapid traverse X axis 30.5m/min Rapid traverse Z axis 30.5m/min Approximate weight 2750Kg MACHINE EQUIPPED WITH: - Haas CNC Control system 3 jaw chuck 165mm diameter Parts catcher Hydrafeed Multifeed 65 Barfeed 17 assorted tool holders, 5 of which are new and boxed Interlocked guarding Automatic lubrication system Coolant system Manual Cycle start hours 782 Feed cutting hours 413 NB Current list price new, machine £56,415.00, barfeed £12,000.00 Total £68,415.00 Special Price here at RK International

Condition: excellent (used), Installed new in 2022, this conveyor was taking product from a low level multihead weigher up to a vertical form fill seal machine in a room where the height was restricted. As new condition. Guedsrq Eawepfx Ag Noh

Condition: excellent (used), REF: MM6212 1 X Large stainless-steel framed swan-neck elevator conveyor with flighted belt. Technical specification ⚙️ ✅ Belt width - 365mm. ✅ Infeed height - 550mm. ✅ Outfeed height - 2500mm. ✅ Overall dimensions - 4.3m long x 740mm wide x 2.6m high. Guodpexd U Insfx Ag Nsh

Condition: excellent (used), 1 x Incline conveyor. Located Melksham. Lift out £30. UKFM1-6799 Gedpfx Agsxc H Nbs Njuh

Condition: excellent (used), Year of construction: 2006, High pressure gas used tube semi trailer for helium, hydrogen, oxygen, nitrogen, argon, methan, CNG Semi trailer SCHMITZ year 2006 Tare 7900 kg Gedev N Ex Sopfx Ag Neuh Bottles: Volume 17400 liters Working pressure 200 bar Tare 16750 kg We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be happy to provide you with a quotation or give you more information about other pressure vessels. To discuss the possibilities, please contact us by phone or e-mail.

Condition: used, trough conveyor belt conveyor belt with high load capacity total length: 1000cm tape width: 80 cm total width: 122cm Guedjt Aagyspfx Ag Nsh steel tube frame structure. steel guide rollers strap thickness: 0.8 cm drive: currently not equipped "If required, we can add a geared motor.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: LVT50 GMRJA/04069, MACHINE SPECIFICATION Height of centres 195mm Swing over bed 400mm Swing over cross slide 246mm Swing in gap 585mm Width in front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 0-2500rpm Spindle nose mounting (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 130mm Travel of tailstock barrel 178mm Taper in tailstock barrel No. 5 MT Approx. Weight 1800kg Machine in Metric execution Gedpoxldidofx Ag Nsuh   MACHINE EQUIPPED WITH Newall 2 Axis Digital Readout System 3 Jaw Chuck Quick change Toolpost Ainjest high speed screwcutting attachment Chuck Guard Lighting Coolant System Rear Splashguard

Condition: excellent (used), REF: MM6213 1 X Large stainless-steel framed swan-neck elevator conveyor with flighted belt. Technical specification ⚙️ Gsdpfxoxd Uyws Ag Neuh ✅ Belt width - 365mm. ✅ Infeed height - 550mm. ✅ Outfeed height - 2500mm. ✅Overall dimensions - 4.3m long x 740mm wide x 2.6m high.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 52AMXTE5308, SPECIFICATION Gjdpowmn A Tjfx Ag Neuh Table size 1244 x 230mm Longitudinal traverse 815mm Cross traverse 300mm Vertical traverse 405mm Quill travel 125mm Quill feeds 0.04, 0.08, 0.15mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.25Kw Spindle speeds (inf. Variable) 50-3500rpm Spindle to nose to table 0- 450mm Spindle centre line to column 171 – 482mm Overall height 2100mm Overall depth 1300mm Overall width 1625mm Weight 950Kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 3 axis DRO system Infinitely variable spindle speeds longitudinal power feed Cross power feed Table guarding One shot centralised lubrication system Lighting Base splash tray Coolant system NB Machine ex Dyson apprentice training facility, in excellent condition

Condition: excellent (used), REF: MM6214 1 X Outfeed stainless-steel framed elevator conveyor. Gjdoxd Upljpfx Ag Neuh Technical specification ⚙️ ✅ Belt width - 330mm. ✅ Infeed height - 150mm. ✅ Outfeed height - 1050mm. ✅ Overall dimensions - 2000mm long x 600mm wide x 1140mm high. Note 🗒️ Previously used as outfeed from VFFS bagger.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1096182, SPECIFICATION X axis traverse 1016mm Y axis traverse 406mm Z axis traverse 406mm Table size 1467 x 267mm Maximum weight on table 454Kg Spindle taper BT40 Spindle speed 0-6000rpm Spindle motor 5.6kW Rapid feedrate 5.1m/min Toolchanger capacity 10 tools Weight 2600Kg Godpfx Aswx Hb Eeg Neuh MACHINE EQUIPPED WITH Haas CNC control Worklight Coolant System Enclosed guarding

Condition: excellent (used), REF: MM6215 1 X Outfeed stainless-steel framed elevator conveyor. Technical specification ⚙️ ✅ Belt width - 330mm. Infeed height - 150mm. Gjdjxd Ukpopfx Ag Nouh ✅ Outfeed height - 1050mm. ✅ Overall dimensions - 2000mm long x 600mm wide x 1140mm high. Note 🗒️ Previously used as outfeed from VFFS bagger.

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 6V0146, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width in front of faceplate 165mm Bed length between centres 650mm Spindle speeds (infinitely variable) 15-3250rpm Godpfx Ajwmm S Tsg Njuh Spindle nose mounting (Camlock) D1-4 Spindle bore 42mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 100mm Travel of tailstock barrel 145mm Taper in tailstock barrel No. 4 MT Machine in Metric execution   MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chucks Quick change toolpost and 2-off toolholders Chuck guard Saddle mounted chip guard Coolant system Lighting Rear splashguard NB Machine ex display Dyson apprentice training facility, in excellent condition

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1761-1700, 457 x 152mm capacity. Equipped with magnetic chuck, power rise and fall to wheel head, table guard, coolant system, and dust extraction. SPECIFICATION Jones & Shipman Model 540P Working Surface of table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor to table height 1035mm Table traverse speed range per min 1.5 – 18m Guedpfx Agjnxi Uuj Nsh Cross feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle center to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 2880rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution MACHINE EQUIPPED WITH Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1081462, SPECIFICATION Travel X axis stroke 1016mm Y axis stroke 508mm Z axis stroke 635mm Distance spindle nose to table 102-737mm Table Width 457mm Length 1219mm Max. Weight on table 1588kg T Slots : width 16mm : pitch 80mm   SPECIFICATION Cont’d Spindle Taper size No.40 Speed 0-7500rpm Bearings Bearing lubrication Air/oil injection Cooling Liquid cooled Motor Spindle motor, max. rating 14.9kW Feedrate Rapid X, Y & Z axis 25.4m/min Max. Cutting feedrate 16.5m/min Toolchanger Capacity 20 tools Type BT40 General Gsdpfx Aet Dmt Aeg Neuh Approximate machine weight 5670kg Air supply (min) 113lpm, 6.9 bar MACHINE EQUIPPED WITH:- Haas (Fanuc compatible) CNC Control system Through spindle coolant Wireless intuitive probing system High speed machining Programmable coolant nozzle Automatic lubrication system Enclosed guarding Swarf auger Lighting

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: BO 94392, A familair machine in any toolroom, this Jones and Shipman 540P is equipped with a 6″ x 18″ magnetic chuck, power rise and fall, coolant system and dust extraction. A toolroom institution: USED Jones & Shipman Model 540P Horizontal Spindle Surface Grinding Machine Specification Working Surface of the table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor-to-table height 1035mm Table traverse speed range per min 1.5 – 18m Cross-feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle centre to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 3000rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution Gujdpfxsnxi R Uj Ag Njh Machine equipped with Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction Lighting

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1091950, SPECIFICATION Travel X axis stroke 1626mm Y axis stroke 813mm Z axis stroke 762mm Spindle nose to table (max) 889mm Spindle nose to table (min) 127mm Table Length 1626mm Width 711mm T Slot width 16mm T Slot centre distance 125mm Number of Std T slots 5 Max. Weight on table 1814kg Spindle Maximum rating 22.4kW Maximum speed 7500rpm Maximum torque 610Nm at 500rpm Drive system 2 speed geared head Taper BT50 Bearing lubrication Air/Oil injection Cooling Liquid cooled Feedrate Rapids on X 13.7m/min Rapids Y 15.2m/min Rapids on Z 15.2m/min Max. Cutting feedrate 12.7m/min Axis Motor Max. thrust X 24910N Max. thrust Y 24910N Max. thrust Z 24910N Toolchanger Capacity 30 Maximum tool diameter (adjacent empty) 254mm Maximum tool diameter (full) 102mm Guodpjt Dmmvefx Ag Noh Maximum tool length (from gage line 406mm Maximum tool weight 13.6kg Tool to tool (avg) 4.2 sec Chip-to-chip (avg) 6.3 sec General Air required 113l/min, 6.9 bar Weight 10,206Kg MACHINE EQUIPPED WITH:- Through spindle coolant Swarf auger Rigid tapping Hard drive Lighting Enclosed Guarding

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1064590, SPECIFICATION Travel X axis stroke 1270mm Y axis stroke 508mm Z axis stroke 635mm Distance spindle nose to table 102-737mm Table Width 457mm Length 1321mm Max. Weight on table 1588kg T Slots : width 16mm : pitch 80mm   SPECIFICATION Cont’d Spindle Taper size No.40 Speed 0-7500rpm Bearings Bearing lubrication Air/oil injection Cooling Liquid cooled Motor Spindle motor, max. rating 14.9kW Feedrate Rapid X, Y & Z axis 18m/min Max. Cutting feedrate 12.7m/min Gsdpjwy Uy Esfx Ag Njuh Toolchanger Capacity 20 tools Type BT40 General Approximate machine weight 6033kg Air supply (min) 113lpm, 6.9 bar MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control system Programmable coolant nozzle Automatic lubrication system Enclosed guarding Swarf auger Lighting

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 23087A, SPECIFICATION Guodovntguspfx Ag Njh Maximum grinding surface 140 x 300mm Distance between column and wheel axis 300mm Max.distance between table and wheel 280mm Rapid feed per turn of handwheel 2mm Micrometric feed by small handle 0.01mm Size of cup wheel 2.2kW Wheel speed 2840rpm Approximate weight 400kg MACHINE EQUIPPED WITH 260mm x 140mm x75mm (thickness) magnetic chuck Coolant system Guarding

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: 481244, SPECIFICATION Thickness Mild Steel 3.4mm Maximum Cutting Length 1320mm Cutting frate 28 spm Motor 3.75kW 240 Volt Approx. Weight 1200Kg MACHINE EQUIPPED WITH Front Support Arms Side Squaring Strip Gjdpfx Aov I Sbqsg Nouh 4 Edge Blade Single/Continuous Stroking Rock & pinion Backgauge Wandering Foot Pedal with E Stop Rear Guard with Light Curtain