Used Micro Screw Feeder for sale (9,666)

Condition: excellent (used), Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Gtedpfx Abjx Dkmgsdot Technical details: • Model: ZSK 83 • Screw system: Co-rotating twin-screw • Motor power: 46 kW • Barrel: Water-cooled • Degassing zone: available • Dosing unit: included (as seen in the photos) • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional General information: This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Inspection and test run on site possible by arrangement. Worldwide transport possible. If interested, please get in touch—further photos, datasheets, and videos are available.

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Twin-screw extruder Ref. No.: DE27695 Manufacturer: Leistritz Type: ZSE 40 HP Gtsdpfox Dip Tsx Abdet Year of manufacture: 2002 Screw diameter: 2 x Ø 40.0 mm L/D: 40D Drive: 70 kW Details: co-rotating, segmented screws and barrel, 1 x segment for side feeding Options: pelletizing, dosing, side feeder Does this offer not meet your requirements? Please visit our website Plama Engineering or send us your detailed inquiry, we have suitable solutions for almost every budget.

Year of construction: 2023, condition: new, functionality: fully functional, Screw compressor model: UVG30-20.5WG-INV (WP-SF-BV-CM-BY2-PL-PB) Ex Medium: Biogas Electrical power: 37 kW Operating pressure: 20 bar g Gedex R Tucspfx Abdett Inlet pressure: 0.003–0.15 mbar (g) Volume flow: 104 Nm³/h max. H2S concentration:

Condition: good (used), Year of construction: 2006, Screw compressor MARK Type: MAS 7,5KW Year 2006 Power 7,5KW Gsdpfetx Aknjx Abdjtt Pressure : 10 Bar Dimensions: L100cm X W 62 cm X H 105 cm Weight: 215 KG Ready to use condition.

Condition: used, Non-STOP envelope feeder StenzFeeder for printing machines in the quarter-sheet format segment with bar or suction head feeder. Fully functional. Includes delivery belt. Format: 0x0 Equipment: envelope feeder Gedpox Rh Ecsfx Abdott belt delivery Max. format size: 36.5 x 35 cm Maximum passage width: 36.5 cm

Condition: like new (used), Year of construction: 2021, operating hours: 15 h, functionality: fully functional, input voltage: 230 V, Equipment: CE marking, Bin tipper with 130° rotation Maximum load 200kg at 350mm from the carriage Loading of 80, 120, 140, 240-litre wheelie bins at floor level Bin retention by the wheels Discharge height 1284mm from ground level Cycle time: lifting 17s; lowering 12 seconds Power supply 230V Double control panel Up and down buttons with operator safety; Continuous contact and operation validation required Gtjdpfsx Hq Avsx Abdot

Condition: good (used), overall weight: 1,200 kg, volume flow: 890 m³/h, Manufacturer: Worthington Model: RLR100V6 Max. working pressure: 9,5 Bar Gtedpfx Ajuf Nibsbdst Power: 100Hp / 75KW 75 kW screw compressor with frequency inverter, with a flow rate of 880 m3/hour. Flow rate: 890 m3/hour. Three-phase 380V 3000 rpm Weight: 1200 kgs.

Condition: good (used), Year of construction: 2007, operating hours: 9,600 h, functionality: fully functional, Kaeser SK21 screw compressor from 2007 in excellently maintained condition. Gtjdpfxsx H Ulue Abdjt Maintenance kit (oil separator cartridge, replacement filter, air filter, and oil) is included. Maintenance records and compressor logbook are available. Power: 11 kW Pressure: 8 bar Load hours: approx. 9,600 h #8442

Condition: used, Year of construction: 2000, Used feeder Year of manufacture: 2000 Gtsdpsumpp Eefx Abdst Suitable for Kündig Uniq edge sanding machine Technical specifications: Max. reach: 1050 mm Number of feed rollers: 4 Roller diameter: 120 mm Roller width: 60 mm Spring travel of rollers: 25 mm Speed settings: 8 (2/4/5.5/6.5/11/13/16.5/33 m/min) Motor power: 0.75 kW Connection: 400V/50 Hz Weight: 32.5 kg The console shown in the picture is not included in the scope of delivery! Location: Flörsheim Availability: Immediately

Year of construction: 2010, condition: good (used), 3.piece ball screw ( from HURON BAZ ) make SCHNEEBERGER Diameter 63 mm Diameter 50 mm Diameter 40 mm In good condition. Godjh I T Nropfx Abdott

Condition: good (used), For sale are various automation components and accessories Our warehouse is equipped with: - conveyor belts - spiral conveyors - placement machines - handlings - ascending conveyors - robots - transport rollers UVM Ask for our catalog our employees will be glad to advise you loading & or dispatch Europe-wide against surcharge possible Prices plus value added tax Viewing by appointment possible. Contact us, our team is happy to help you. Trade-in or exchange possible! Gtodpsnr Hfvsfx Abdst Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Year of construction: 1999, condition: good (used), Mono pump, metering pump, high-pressure pump, water pump, screw pump, progressive cavity pump, transport screw, screw conveyor, conveying technology, tubular screw conveyor, metering screw, screw metering -Manufacturer: Resch, dosing screw type RBL50D -Dosage: stepless, with frequency-controlled operation -Drive motor: 2.2 kW -Dosing control: Ströter Speed Commander Vector Digital Gsdpfoxy I Hpex Abdjtt -Inlet/outlet opening: Ø 80 mm, see photos -Usage: The pump was used to dispense ultrasound gel -Transport dimensions: 1810/730/H270 mm -Weight: 152 kg

Condition: excellent (used), Year of construction: 2007, operating hours: 60,649 h, functionality: fully functional, Oil-free screw compressor Atlas Copco ZT90VSDFF. Integrated frequency converter and drum dryer. 90 kW with 8.75 bar and 15.50 m3/min. High-pressure element replaced in 2013. Gedpfx Asx Nm Itjbdett

Year of construction: 1996, condition: good (used), with Delivery belt Gtodpfx Abswr Ab Iedet

Year of construction: 2008, condition: good (used), Complete compressor and air station Manufacturer: KAESER Gtedpfegw Diasx Abdot Models: AS 36 / TC 31 Year : 2008 Working pressure 7,5 bar

Condition: good (used), functionality: fully functional, Twin screw extruder / laboratory extruder - 2 x 30mm screw diameter - 4x heating zones Gtedpfx Aeu Hik Djbdst - dosing - Control system

Condition: good (used), SAC spindle moulder with sliding carriage and power feed 3-roller Holzher power feed Side carriage adjustable up and down for the cutter, can also be used as a table extension Table with pull-out extension Spindle lock Adjustable fence with Aigner guides 5 spindle speeds (3000, 4500, 6000, 8000 and 10,000) Spindle diameter 40 mm 7.5 kW motor with brake CE mark Technical documentation included Gtsdpfex Sw Szex Abdst Machine tested, fully functional, ready for work

Condition: used, Year of construction: 2010, operating hours: 76,256 h, functionality: fully functional, Equipment: type plate available, Frequency-controlled compressor New oil and filters Compair Type: L22SR-7,5A V2 Volume flow: 3.53 m³/min Pressure: max. 10 bar Motor power: 22 kW Year: 12/2010 Operating hours: 76,256 Weight: 355 kg A suitable refrigeration dryer and 2000L compressed air tank can be purchased separately. Gtjdpfxewvac Rj Abdot The machine can be demonstrated under power on site. All information provided without guarantee. Errors and interim sale excepted.

Year of construction: 2006, condition: ready for operation (used), Additional Equipment Machine includes an SA 500 extractor built in 2006 and a 6m long cooling section. This KUHNE KS45-24D compounding extruder was manufactured in 2006. Ideal for processing a variety of materials, it offers robust construction and reliable performance. Consider the opportunity to buy this KUHNE KS45-24D compounding extruder. Contact us for more information. Gsdpfx Aex D Hcqsbdjtt Application Types Extrusion

Condition: used, Pressing screw REG-MAC Gjdpfx Absxgtd Hjdjtt for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: M60I/9033, Offer Number: M60I/9033 Machinetype: screw washing machine Make: MIKO Type: Constr. year: 1994 capacity: Gtsdox Igf Njpfx Abdst Location: Germany

Condition: good (used), Year of construction: 2000, Screw compressor Manufacturer: Atlas Copco Type: GA 90 Year of construction: 2000 Power: 94 kW Pressure max: 10 bar Gtodpfjvi E Uysx Abdst Speed: 1,487 rpm

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 11001257, Scansonic ALO3-DYD2W-1.7 – Laser Processing Head / Laser Optics with Fronius Drive Wire Feeder Manufacturer: Scansonic Model: ALO3-DYD2W-1.7 Serial Number: 11001257 Date of Manufacture: 2018/02 Material/Assembly Code: KG0033-020-BA Condition: Used, very good technical condition Description: The Scansonic ALO3-DYD2W-1.7 is a laser processing head from the ALO3 series, designed for high-precision laser joining processes. Thanks to its compact design and high repeatability, it is ideally suited for: - Laser welding - Laser hybrid welding (Laser + MIG/MAG) - Laser brazing - Robot-based precision applications The ALO3 series is used worldwide in the automotive and supplier industries and offers: Gtjdpfx Aex H S Slebdjt - Excellent seam tracking - Robust mechanics for 24/7 industrial operation - Precise process monitoring - High compatibility with CO₂, Nd:YAG, and fiber lasers This ALO3-DYD2W-1.7 model is a variant with specific focus/optic parameters (1.7), optimized for certain welding or joining processes. Technical Data (according to nameplate & product family) Type: ALO3-DYD2W-1.7 Serial Number: 11001257 Year of Manufacture: 2015 Patent Numbers: DE 1000685 US 6,596,962 EP 11 25 672 Robust industrial optics for laser processing Compatible with leading robot manufacturers (e.g. KUKA, ABB, Fanuc) Areas of Application: Automotive industry / Body-in-white production Serial laser joining processes Aluminum and steel connections Welding in robotic applications Precision seam tracking with adaptive control (enabled by Scansonic systems) Condition: Removed from running operation Visually clean Mechanically fully functional Serial number and optic parameters clearly legible Scope of Delivery: - Scansonic ALO3-DYD2W-1.7 laser processing head - Fronius Drive wire feeder

Condition: excellent (used), Year of construction: 2008, operating hours: 22,795 h, functionality: fully functional, machine/vehicle number: 5039, overall weight: 600 kg, power: 18.5 kW (25.15 HP), type of cooling: air, Equipment: documentation/manual, type plate available, Frequency-controlled screw compressor with integrated heat recovery Gtodpfx Ajw Trghebdst Manufacturer: Kaeser Type: ASD 32 Delivery rate: 8 bar - 3.2 m³/min Motor power: 18.5 kW Compressed air connection: G 1¼ Max. available thermal output: 16.4 kW Includes complete documentation + CE certificate Next maintenance at 24,360 operating hours Weight: 600 kg Required space: 1350 x 921 x 1505 mm (L x W x H) The machine can be demonstrated on site. All information subject to change. Prior sale reserved.

Condition: like new (used), Year of construction: 2021, operating hours: 494 h, functionality: fully functional, type of cooling: air, Equipment: CE marking, documentation/manual, type plate available, Operating hours total: 494 h Load hours: 237 h Maintenance freshly performed -The variable speed screw compressor NOBEL with 'DNair2' microprocessor control is already factory-prepared for the SMS module (optionally available under: 9062744) Gtjdpfxjqd Uvus Abdet -The controller communicates in plain text; all important operating states can be read directly. -The controller has an RS 485 interface Features: Thermal control valve compressor block POWERSYSTEM separate radial fan, temperature controlled for optimal cooling Very good accessibility for all maintenance work Rotation direction monitoring using phase sequence relay without dryer, standard with galvanized cyclone separator tank Technical details: Model: Powersystem NOBEL 15-10 DV Pressure bar: 10 Delivery rate L/min: 840-2100 Motor kW/HP: 15/20 Voltage Volt/Hz: 400/50 Noise level dB (A): 68 Weight: 250 Kg The machine can be demonstrated on site under power if desired. All information without guarantee Errors and prior sale excepted Sale EXW free loading from warehouse Hessisch Lichtenau. Sale exclusively to commercial buyers, excluding any liability for material defects. Liability for damages resulting from injuries to health, body, or life and grossly negligent and/or intentional breaches of my duties as a seller remains unaffected. This offer is exclusively aimed at entrepreneurs (commercial users) or dealers. No sale to consumers/end customers.