Used Mikron Um 600 for sale (179)

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer Ndjdpfx Ahokzpmuo Eec -Manufacturer: Trasfor, transformer Trafo 1 PH Snl from CNC milling machine Mikron WF 51C/155 -Type: TNM1m2k5/E -Technical data: see photo identification plate -Dimensions: 180/160/H215 mm -Weight: 25.5 kg

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. Ndjdet Hw D Ropfx Ah Esc The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 1,889 h, functionality: fully functional, travel distance X-axis: 860 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, Machining centre with only 1,889 spindle hours! TECHNICAL DETAILS Travel X-axis travel: 860 mm Y-axis travel: 560 mm Z-axis travel: 600 mm Spindle data Max. spindle speed: 10,000 rpm Ndedow Ngmuopfx Ah Ejc MACHINE DETAILS Spindle hours: 1,889 h Power-on hours: 42,782 h Number of controlled axes: 3 Control model: HEIDENHAIN iTNC530

Condition: good (used), Year of construction: 1990, 1 used universal tool milling machine made by Mikron type WF 2 SA year 1990 with Heidenhain active digital readout TNC 114 Stepless feed Lamp Coolant device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm Clamping surface 635 x 250 mm Feed in 3 axes 0 - 750 mm/min Nedsrywgzopfx Ah Ejdc Rapid traverse in 3 axes 1400 mm/min Holder ISO 40 Vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m Weight approx. 1200 kg

Condition: good (used), Year of construction: 1995, Machine is in good working condition. Ndsdpfx Ahsuzimne Ejc Control unit TNC 426

Condition: ready for operation (used), Year of construction: 1994, Stations: 24, substations: 20, side stations: 20, axes: 2/station, collets: 24, production output single/double cycle: 120/240 pieces/min, stroke: 35mm, max. workpiece diameter: 25mm, spindle speed: 20000rpm, machine weight: approx. 2650kg, control: Mikron MAC 50, operating hours: approx. 17335h. Documentation available. An on-site inspection is possible. Ndodpfxew Emx Re Ah Eoc

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer Njdpfx Aekzpm Hjh Eodc -Manufacturer: LAPP, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: DT -Power: 300VA -Primary: 3x380V -Technical data: see photo identification plate -Dimensions: 150/90/H150 mm -Weight: 5.7 kg

Condition: used, Year of construction: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm total power requirement 2,6 kW Ndodpfxou U Sabs Ah Esc weight of the machine ca. 1,5t t

Condition: good (used), Mikron WF31D Precision milling and drilling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Technical specification The WF 31 D is a precision milling and drilling machine for series production and CNC training. Ndedpfx Aowiucfoh Ejc Driven by an automatically shiftable stepped gearbox and Poly-V-belt. Vertical spindle can be extended by 90 mm; changeover from vertical to horizontal machining possible. Recirculating ball screws with DC drives enable simultaneous feed movements. Guides are protected against dust, chips and coolant. Technical data Manufacturer: Mikron Type WF31D Control: Heidenhain TNC 355 Longitudinal movement (X): 560 mm Transverse movement (Y): 500 mm Vertical movement (Z): 400 mm. Drive power: 3.3/4.0 kW Speed range: 40-4000 rpm. Feed speed: 2-3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min. Electrical equipment Total installed rated power: 10.0 kW installed effective power: 7.3 kW. Operating voltage: 3 x 380 V - 50/60 Hz Protection class: IP 54. Max. permissible ambient temperature: +35 °C Relative humidity: 75 %. Dimensions and weights Width 2450mm Length 2800mm Height 2000mm Net weight of the machine: approx. 2570 kg. Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), functionality: fully functional, 1 used tool milling machine Micron brand Type WF 2/3 DP with Heidenhain Type 135 linear motion control Travel X/Y/Z 400/410/400 mm Table clamping area 800 x 450 mm Speed 30 – 2240 rpm Feed rates 1 – 750 mm/rev Rapid traverse 2000 mm/min Nsdpfx Ahsv N Dzfe Esdc Tool holder ISO 40 Machine weight approx.: 1.4 t Space required approx.: 2.1 x 1.6 x 2.2 m

Condition: good (used), Year of construction: 1999, Machine is in good condition. X 750 mm Y 400 mm Ndsdpfx Aowx Rafsh Esc Z 500 mm 10.000 rpm

Condition: used, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board -Manufacturer: Mikron, electronic module printed circuit board for operating unit. TCD22 -Type: WW TCD 22 . 104.73.20.041 -Dimensions cardboard: 410/310/H65 mm Ndsdpfx Ahsk Aua Ne Eec -Weight: 0.6 kg

Condition: used, Year of construction: 1992, max. wheel diameter 150 mm Nsdpfxot Hwxbj Ah Eodc gear width 300 mm max. module 4,5 min. module total power requirement 20 kW weight of the machine ca. 6 t dimensions of the machine ca. m

Condition: used, machine/vehicle number: 152.00.80.20, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -function tested -Clamping table: 800 x 445 mm -Travel: X/Y/Z 500/500/385 mm -Spindle holder: SK40 -quill stroke: 90 mm -Speeds from: 31.5 to 3150 rpm -Coolant device Ndedpfxofbma Ne Ah Eoc -Dimensions: 1475/1770/H2000 mm -Weight: 1966 kg

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Bosch, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: 100-911637 -Power: 4.5kVA Nsdpjkyy Uqjfx Ah Eodc -Primary: 3x380V -Secondary: 3x95/165 V -Dimensions: 335/135/H350 mm -Weight: 41 kg

Condition: used, Angle measuring device, encoder, rotary encoder, absolute rotary encoder -Manufacturer: Heidenhain, angle measuring device with own storage in original packaging -Type: RCN 619.5GS5-19B00 .: 249 003-19 -Quantity: 2x measuring device available -Price per piece -Dimensions of box: 180/140/H90 mm Ndodpfx Ahsqrwxaj Eoc -Weight: 1.0 kg

Condition: used, CNC control, control panel, logic unit, path control -Manufacturer: Heidenhain, logic unit path control -Type: LE 407 A 236 484 10 -Individual components: see photos Ndsdpfx Ahspz Sf Ej Eoc -Dimensions: 480/330/H140 mm -Weight: 9.5 kg

Condition: used, Safety switch, safety switch, protective grid switch -Manufacturer: Euchner, safety switch Safety Switch from CNC milling machine Mikron UME 600 -Type: TZ2LEO24M .: 090559 -Technical data: see photo of nameplate -Dimension: 170/110/40 mm -Weight: 1.1 kg Nodpfx Ahjrb E E Es Ejdc

Condition: used, Ball screw with nut, transroll screw, ball screw nut, lead screw, threaded rod, threaded bolt, threaded rod, ball screw, linear bearing, precision ball screw -Manufacturer: Mikron, ball screw from CNC milling machine Mikron WF 51C/155 -Thread length: 540 mm Nsdpfx Ahjkvrqis Esdc -Shaft: Ø 32 mm -Dimensions: see photos -Dimensions: 870/140/H130 mm -Weight: 18kg

Condition: used, CNC control, control panel, machining center -Manufacturer: Heidenhain, control panel/CNC control from CNC milling machine Mikron WF 51C/155 -Control: Heidenhain TNC 155 -Individual components: see photos -Dimensions: 660/640/H610 mm -Weight: approx. 73 kg Ndsdpfx Aekxhn Esh Esc

Condition: good (used), Servo Drive, Servo Card, Input Processor, Control Card, Input Card, Controller, Converter, Controller, Servo Module, Axis Amplifier, Axis Amplifier, Velocity Control Unit, Spindle Amplifier Module, Servo Amplifier -Manufacturer: Bosch, transistor amplifier completely equipped from CNC milling machine Mikron WF 51C/155 -Type: TR15-XA-140-230V -Control cards/single modules: see photos Nedpfx Ahswd N S De Eedc -Dimensions: 480/260/H365 mm -Weight: 24 kg

Condition: used, Permanent magnet motor, permanent magnet motor, electric motor, n-Mot, Perm Magnet Motors, servo motor, geared motor, electric motor, three-phase motor -Manufacturer: Siemens, permanent magnet motor from CNC milling machine Mikron WF 51C/155 -Type: HU3074-OAC01-Z -Voltage: 167 V -Power: 1.8 kW -Speed: 2000 rpm -Shaft: Ø 22 x 45 mm -Number: 2x motor available Njdpfekxhpujx Ah Ejdc -Price per piece -Dimensions: 390/140/H185 mm -Weight: 23 kg/pc.

Condition: used, Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke -Manufacturer: varimax, soft start choke, three-phase choke from CNC milling machine Mikron WF 51C/155 -Type: D 1515 S3 Ndsdpskzpngjfx Ah Ejc -Current: 10A -Dimension: 180/90/H190 mm -Weight: 9.5 kg

Condition: used, Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron WF 51C/155 -Motor: AEG 380V 8 kW 1400/2850 rpm Nedpfx Ahokvrptj Esdc -Dimensions: see photos / technical. drawing -Dimensions: 1700/580/H700 mm -Weight: approx. 525 kg

Condition: used, CNC control, control panel, machining center operator panel, control unit, control panel, control unit -Manufacturer: Mikron, operating unit Njdpfxeprb Dvo Ah Esdc -Type: TCD 22 - DIN 8659 -Printed circuit board: WW TCD 22 control unit 104.73.20.042 -Individual components: see photos -Dimensions: 480/130/H240 mm -Weight: 5 kg