Used Mikron Vce 800 Pro for sale (191)

Condition: used, Year of construction: 1997, Technical details: x-travel: 710 mm y-travel: 630 mm z-travel: 500 mm turning speed range - spindle: 5 - 5000 1/min power - main spindle: 11 kW tool taper: SK 40 tool changer: 44 Werkzeuge feed: 10 m/min surface area: 1200 x 600 mm Ndodpfxevb Hzrs Ah Ujf table load: 0,5 t total power requirement: 15 kVA weight of the machine ca.: 4,24 t Toolchanger with 44 tools, pendant handwheel for easy setup. *

Condition: ready for operation (used), Year of construction: 2008, operating hours: 3,825 h, functionality: fully functional, machine/vehicle number: 214.84.70.265, MIKRON HSM 400 U from 2008, very few operating hours Nodpfexg Rvysx Ah Uedf

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 5.47.07.02, feed length X-axis: 600 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, rotational speed (max.): 6,300 rpm, number of slots in tool magazine: 44, TECHNICAL DETAILS Drive power at 44% duty cycle: 9 kW Drive power at 100% duty cycle: 6 kW Max. torque: 52 Nm Machining spindles (vertical and horizontal) Max. torque at the spindle at 44% duty cycle: 800 Nm Number of gear stages: 4 Speed range adjustable (vertical and horizontal): 10 – 6,300 rpm Tool holder / Pull stud: SK 40 / DIN 69871 Max. tool weight: 13 kg Tool diameter: 130 mm Pull force: 10,000 N Ejector force: 3,500 N Travel paths in automatic mode Longitudinal movement, spindle feed (X-axis): 600 mm Cross movement, spindle slide (Y-axis): 500 mm Vertical movement, spindle slide (Z-axis): 450 mm Feed drive (AC) Feed rate programmable X / Y axis: 0 – 15,000 mm/min Feed rate programmable Z axis: 0 – 12,000 mm/min Rapid traverse speed X-/Y-axis: 15,000 mm/min Rapid traverse speed Z-axis: 12,000 mm/min Coolant Coolant tank capacity: 150 l Flow rate: approx. 20 l/min Noise emission Sound power: 75 dB(A) Clamping table Table size: 530 × 900 mm Number of T-slots: 4 T-slot width: 14 H7 Table load capacity: 400 kg Tool changer TCD 44 Tool stations: 2 × 22 Tool diameter: 80 / 130 mm Tool length (max.): 350 mm Tool weight (max.): 6 kg Workpiece weight max. in drum magazine: 200 kg Chip-to-chip time: 20-25 s Tool change time: 12 - 16 s MACHINE DETAILS Total weight with protective enclosure: 3,000 kg Total weight with cabin roof: 3,100 kg Ndjdpfswm I N Hox Ah Uof Ambient conditions Max. permissible ambient temperature: 35 °C Max. permissible relative humidity: 75 % Electrical connection data Total installed nominal power: 15.8 kW Utilized and connection power: 12.3 kW Operating voltage and frequency: 3 × 400 V / 50 Hz

Condition: used, Year of construction: 1991, Milling machine in good condition, fully operational. Connected, can be tested, inspected. Specification: Model: Mikron WF31C Year: 1991 X axis: 500 mm Y axis: 500 mm Z axis: 400 mm Speed: 31,5 - 3150 rpm Contorter: Heidenhain TNC 155 Motor power: 4kW Weight: 2 300 kg Machine dimensions: 2580 x 1800 x 2125 mm Ndedpfoq Hdwujx Ah Uef Manufactured in: Switzerland If you have any further questions, we will be happy to answer them.

Year of construction: 1992, condition: ready for operation (used), X-axis: 560mm, Y-axis: 500mm, Z-axis: 400mm, clamping table dimensions vertical: 300/450mm, number of threaded holes: 2/6, threaded hole spacing: 45mm, thread: M16, angle table clamping surface: 460/800mm, number of T-slots: 7, T-slot spacing: 63mm, T-slot width: 14mm, max. workpiece weight (recommended): 350kg. Milling spindle drive number of working spindle speeds: 21, speed (geometrically graduated): 40-4000/min, step increment: 1.259, spindle motor power: 3.3/4kW, tool holder: ISO 40 / M16 with draw-in groove, vertical quill stroke: 90mm, feed in all 3 axes steplessly adjustable: 2-3000mm/min, rapid traverse X-axis and Y-axis: 6000mm/min, rapid traverse Z-axis: 4000mm/min, feed motor torque longitudinal and transverse: each 3.5Nm, feed motor torque vertical: 7Nm, control: Heidenhain TNC 407, connected load: 8.7kW, length: 3705mm, width: 2430mm, height: 3100mm, weight of the machine with vertical milling head and angle table: 2410kg, weight of the crate base: 170kg, weight of the transport crate: 400kg, operating hours: 18,924h. Accessories: 3D probe, 20x tool holders, splash guard cabin, coolant pump, work light, handwheel, machine documentation. An on-site inspection is possible. Ndsdpfsxcxz Nsx Ah Usf

Condition: good (used), Year of construction: 1990, 1 used universal tool milling machine made by Mikron Njdpfx Ahjrywgzo Ujdf type WF 2 SA year 1990 with Heidenhain active digital readout TNC 114 Stepless feed Lamp Coolant device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm Clamping surface 635 x 250 mm Feed in 3 axes 0 - 750 mm/min Rapid traverse in 3 axes 1400 mm/min Holder ISO 40 Vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m Weight approx. 1200 kg

Condition: ready for operation (used), Sell due to new acquisition good condition Mikron VC 1000 milling machine Ndodpjh Tnpxofx Ah Uef

Condition: good (used), Year of construction: 2000, Travels 1350 x 900 x 750 mm Machine. - Control Heidenhain TNC 426 Equipment tool changer 46-fold, milling spindle SK 40 12.000 rpm, incl. IKZ system and spool feeder Ndodpfx Ahsi El Iao Ujf Glass scales, 3D probe Renishaw MP12 Extensive accessories available if required! Please ask if you are interested !

Condition: like new (used), Year of construction: 2001, x-travel 600 mm y-travel 450 mm z-travel 450 mm weight of the machine ca. 6500 kg required space 3,900 x 3,500 x 2,700 mm MIKRON VCP 600 – CNC Vertical Machining Center (Year of Manufacture: 2001) The MIKRON VCP 600 is a precise 3-axis CNC vertical machining center, ideally suited for high-accuracy machining of complex workpieces. With its robust construction, high-performance spindle, and reliable Heidenhain control system, it meets the highest standards in both single-part and series production. All specifications are provided without guarantee. Exact technical details will be provided at the time of purchase. Control system: TNC 426/430 Travel Paths X-axis: 600 mm Y-axis: 450 mm Z-axis: 450 mm Table Table size: 850 x 530 mm Maximum table load: 400 kg Number of T-slots: 6 T-slot spacing: 63 mm T-slot width: 14H12 mm Spindle Spindle speed: 100 – 20,000 rpm Spindle power: 12 / 16 kW Nedpfswmzgfex Ah Uedf Tool holder: HSK-A63 Tool Changer Number of tool positions: 30 Max. tool diameter: 90 mm Max. tool diameter with adjacent slots empty: 110 mm Max. tool length: 250 mm Max. tool weight: 6 kg Chip-to-chip time: approx. 7 seconds Feed and Rapid Traverse Feed rate: 0 – 22,000 mm/min Rapid traverse: 22 m/min Feed force (X/Y/Z): 5,000 N Dimensions and Weight Machine weight: approx. 6,500 kg Installation dimensions (L x W x H): approx. 3,900 x 3,500 x 2,700 mm

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 956.71.80.274, feed length X-axis: 600 mm, feed length Y-axis: 500 mm, feed length Z-axis: 400 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, input voltage: 400 V, Equipment: documentation/manual, The system shown is in perfect condition and ready for immediate use. Ndodpfswnq Sgex Ah Ujf No heavy roughing work has ever been performed with this machine. The machine is being sold together with a vise, including a tool cabinet with the shown contents. Additionally, it comes with 2 sets of ground supports and approximately 80 cutters, all in usable condition (some barely used), some as good as new, mostly coated in solid carbide, suitable for machining steel and aluminum.

Year of construction: 1990, condition: excellent (used), Mikron WF2S tool milling machine with 3-axis Elesta-Visulesta digital display. Rigid angle table , SK 40 spindle mount. Very good working condition , from institute. Machine ready for demonstration under power by arrangement. Ndsdeg Nw Rzopfx Ah Uef

Condition: used, Year of construction: 1981, x-travel 800 mm y-travel 500 mm z-travel 460 mm table surface area 1000 x 500 mm spindle taper SK 40 control HEIDENHAIN TNC 150 spindle turning speed range 31,5 - 3150 U/min feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid traverse longitudinal and cross 6 m/min rapid traverse vertical 4 m/min quill stroke 110 mm distance spindle nose and table max. 559 mm Ndedpfx Ahstqqplo Uof table load capacity max. 500 kg total power requirement 14 kW weight of the machine ca. 3,1 t dimensions of machine L x W x H 2,15 x 1,8 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, coolant

Condition: ready for operation (used), Five older thread milling machines Mikron are available, 3x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible. Nodpfxow Sxyxs Ah Ujdf

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off Nodpot Hw D Rofx Ah Ujdf for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: excellent (used), Year of construction: 1996, NEW ARRIVAL +++++ 1 used, very well-maintained MIKRON MULTISTAR CX 24 transfer machine / rotary transfer machine Machine can be inspected under power. Part setup is no problem. With MITSUBISHI AACPU-S1 control system - Machine Year of manufacture 1996 - Nodot I T N Eopfx Ah Usdf Detailed technical data as per appendix - Machine can be inspected under power. Conversion - INSTALLATION - Setup - Application can be offered. Pricing: ex-site, unpacked, uninsured. Delivery time: immediately - subject to prior sale. Technical data is non-binding - errors excepted. Payment: As is customary for used machines, net before removal.

Condition: used, Year of construction: 2008, x-travel 1.850 mm y-travel 1.400 mm Ndodjvxwuwopfx Ah Ujf z-travel 720/905 mm Control SIEMENS SL 840 D spindle turning speed range 15.000 U/min B - axis -20 / +120 ° Tool bore HSK-A63 0 tool magacine with 45 Plätzen tool length - max. 365 mm workpiece diameter at used places besides 90 mm tool diameter with 2 vacant positions 130 mm NC rotary table 1.600 mm T-slots 12 groove width 18H12 flute distance 100 mm table load capacity 3.000 KG Table speed max. 30 1/min total power requirement 89 kW weight of the machine ca. 26 t dimensions of the machine ca. 7,00 x 6,20 x 4,15 m 5-Axis machining center with Siemens SINUMERIK 840D control, BLUM Laser, Renishaw, RotoClear, Fire extinguishing system, 2x electronic handwheel, Steptec spindle, Spindle oil cooler, coolant through the spindle, High pressure pump, Bürener belt filter system, Chip conveyor. Machine can be inspected under power

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: KU 4165M, travel distance X-axis: 572 mm, travel distance Y-axis: 322 mm, travel distance Z-axis: 265 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 22, The value of the supplied spare parts is approximately €70,000. Ndsdjxamh Ejpfx Ah Uof TECHNICAL DETAILS Loading Modules: 1 module Machining Modules: 3 modules Number of Spindles: 6 Control System System: Bosch Rexroth MTX Part Program Size: Unlimited Remote Diagnosis: Available Programming: ISO code, simulation via EdgeCAM CAM software Workpiece Handling and Loading System Loading System: Parallel to main time, manual, with 3-axis handling or robot Parts Feeding: Paternoster / stack magazine Workpiece Changeover (chip-to-chip time): approx. 6 s Axes Travel X: 572 mm Travel Y1/Y2: 322 mm Travel Z: 265 mm Speed X: 40 m/min Speed Y1/Y2: 32 m/min Speed Z: 25 m/min Acceleration X: 8 m/s² Acceleration Y1/Y2: 8 m/s² Acceleration Z: 4 m/s² Feed Force X: 1,100 N Feed Force Y1/Y2: 1,100 N Feed Force Z: 2,500 N Rotational Speed B-Axis: 1,000 rpm Rotational Speed C-Axis: 500 rpm Acceleration B-Axis: 52 rad/s² Acceleration C-Axis: 90 rad/s² Torque B-Axis clamped: 1,000 Nm Torque B-Axis unclamped: 287 Nm Torque C-Axis clamped: 300 Nm Torque C-Axis unclamped: 187 Nm Working Spindle Tool Interface: HSK 40-A External Diameter: 108 mm Speed: 15,000 rpm Torque (S6 45% duty cycle): 85 Nm Power (S6 45% duty cycle): 18 kW Internal coolant supply up to: 120 bar Spindle distance: 200 mm Workpiece Repeatability: +/- 2 µm Clamping Force: approx. 10 kN (self-locking) Diameter: 140 mm Length: 180 mm Weight: 21 kg Workpiece Clamping Clamping System: EROWA clamping system Activation: pneumatic, 6 bar Tool Changer Tool Discs: externally pre-loadable with position coding, diameter Ø 290 mm Tools (2 discs with 12 positions) per machining module: 22 Tool Disc Weight: 5 kg Max. Tool Weight: 2.5 kg Max. Free Tool Length: 186 mm Max. Tool Diameter: 63 mm Max. Tool Diameter with free adjacent position: 105 mm Shortest chip-to-chip time: ≥ 1 s Max. Total Tool Weight on Disc: 15 kg Positioning time per tool step: 250 ms Tool Holder: HSK 40-A, according to DIN 69893 MACHINE DETAILS Machine dimensions (L x W x H): approx. 9,300 x 3,400 x 3,500 mm Weight per machining module: approx. 4.5 t Weight per loading module: approx. 2.5 t

Condition: used, Year of construction: 1998, x-travel 710 mm y-travel 630 mm z-travel 500 mm table surface area 1100 x 585 mm rotary table dia. 500 mm spindle taper SK 40 spindle turning speed range 5 - 6300 U/min spindle power 11 kW no. of tools in magazin 2 x 22 control HEIDENHAIN, TNC 426 total power requirement 20 kW Ndodpfx Astz Sqheh Uof weight of the machine ca. 5,8 t Accessories: various tool holders, probe RENISHAW OMP 60, coolant

Condition: ready for operation (used), Speed: 3150 rpm, travel X/Y/Z: 710mm/500mm/500mm, number of spindle speeds: 21, feed: 2000mm/min, spindle mount: ISO40/M16, milling head table height: 559mm, table dimensions X/Y: 500mm/1000mm, T-slot spacing: 63mm, max. workpiece weight: approx. 500kg. Dimensions X/Y/Z: approx. 2700mm/2300mm/2200mm, weight: approx. 3300kg, control: Heidenhain TNC 155, documentation available. Ndsdstuwk Uepfx Ah Usf

Condition: used, Year of construction: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm Nodpfou U Sabox Ah Usdf total power requirement 2,6 kW weight of the machine ca. 1,5t t

Condition: used, Heidenhain Active - Digital Display Stepless feed Lamp Cooling device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm feed in 3 axes 0 - 750 mm/min Nedpocmzzgjfx Ah Usdf Rapid traverse in 3 axes 1400 mm/min ISO 40 mounting vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m

Year of construction: 1995, condition: ready for operation (used), Travel X/Y/Z: 560mm/500mm/400mm, speed: 5000rpm, table dimensions X/Y: 900mm/530mm, feed rate: 8m/min, rapid traverse: 10m/min, tool stations: 22, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3950mm/2650mm/2150mm, weight: approx. 3000kg, control: Heidenhain TNC 407/415, operating hours: 29647h. The central lubrication system shows issues. Documentation available. An on-site inspection is possible. Nsdpfx Ahow H At He Usdf

Condition: used, Year of construction: 1992, max. wheel diameter 150 mm gear width 300 mm max. module 4,5 min. module total power requirement 20 kW Ndsdjt Hwxbjpfx Ah Uof weight of the machine ca. 6 t dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 1995, Travel X/Y/Z: 710mm/630mm/500mm, table dimensions X/Y: 1200mm/600mm, max. table load: 500kg, tool stations: 22, tool holder: SK40, speed: 6300rpm, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 2400mm/3400mm/2300mm, weight: approx. 4600kg, control: Heidenhain TNC 426. Includes internal coolant supply and external cooling. Documentation available. An on-site inspection is possible. Njdpfx Asw Exr Aeh Ujdf

Condition: ready for operation (used), Year of construction: 1994, Stations: 24, substations: 20, side stations: 20, axes: 2/station, collets: 24, production output single/double cycle: 120/240 pieces/min, stroke: 35mm, max. workpiece diameter: 25mm, spindle speed: 20000rpm, machine weight: approx. 2650kg, control: Mikron MAC 50, operating hours: approx. 17335h. Documentation available. An on-site inspection is possible. Nodsw Emx Ropfx Ah Ujdf