Used Mobile Crushing Plant for sale (8,900)

Condition: used, Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Hodpsxx Tigefx Ah Ueg Watering system Delivery date to be arranged Available from 06/2026

Condition: used, Year of construction: 2016, operating hours: 4,800 h, functionality: fully functional, Brand: KOMPTECH Model: Chippo 510C with crane Electric motor: 370 kW Rotor: 750 mm Rotor type: Drum chipper Rotor speed: 560 Crane: Palfinger Epsilon Feed: 2 vertical and 2 horizontal aggressive feed rollers, large feed table with plate belt. Feed is controlled according to drum speed. Feed width: 1000 mm Feed height: 750 mm Max. wood diameter: 750 mm Length: 7211 mm Width: 2550 mm Height: 3872 mm Unladen weight: 18,000 kg Hsdpfxew Ekd Rj Ah Ujg Operating hours: 4,800 h Year of manufacture: 2016

Condition: as good as new (ex-display), Year of construction: 2025, Demo unit with approx. 9 operating hours Another machine available immediately (ex works Neckartailfingen) *Options at extra charge – see below Included: + Profile rotor for higher throughput performance We are happy to provide a free trial with your material. You are invited to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us by freight and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Blades: 15 pieces, multiple re-usable edges Double blade row option: + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Hopper volume: approx. 0.6 m³ Hodpfx Ahsb Ny Eyo Ujg Hydraulically operated ram Screen perforation as required (10–40 mm) Extraction nozzle Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 20% hardwood content) - Double blade row + €995 net - Special scraper + €990 net (recommended for shredding veneer, paper, or material thickness

Condition: used, Year of construction: 1981, -1- used hard rock impact crusher, feed approx. 350 x 690, rotor 1000 x 670, capacity up to 40 t/h, with electric motor Hodpfew N Hk Hjx Ah Ujg

Condition: new, power: 290 kW (394.29 HP), gearing type: automatic, fuel type: diesel, color: white, overall weight: 32,000 kg, axle configuration: 8x4, number of seats: 2, emission class: euro6, suspension: steel, driver cabin: day cab, wheelbase: 4,250 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, low noise, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, company-owned, 1x comfort seat, heated seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, telephone pre-installation, navigation system, auxiliary heater, air horn, ABS (anti-lock braking system), traction control (ASR), PTO, fog lights, leaf suspension, aluminum tank, low noise G1, central locking, green environmental sticker. Wheelbase: 4250 mm. Body: Liebherr HTM 904F concrete mixer, 9 m³ on Dautel exchange system, with 25 t VDL SK-25-5700 hooklift system, telescopic extension up to 7 m container. Dautel exchange system WS4 from year 2015. Disc brakes on front and rear axles, driver’s air-suspension seat, comfort velour seat covers for driver’s seat, passenger seat and middle seat, additional hot water heating, driver’s cab, M-cab ClassicSpace, 2.30 m, 320 mm tunnel, 2 remote control keys, locking system with central locking, light sensor, rain sensor, Mercedes PowerShift 3 transmission G 211-12/14.93-1.0, heavy-duty series, new generation from 18 t, digital radio, speakers, 2-way system, navigation system, FleetBoard Manager App ready, Truck Data Center 7, interactive multimedia cockpit, Remote Online, Remote connect, pre-installed wiring and display for up to 4 cameras, aluminum tank 320 l, left, 735 x 700 x 750 mm, OM470 engine, R6, 10.7 l, 290 kW (394 hp), 1900 Nm, Euro VI E engine version, 2nd generation OM470, High Performance Engine Brake, rear engine PTO, flange 100 mm, 650 Nm, Arocs model generation 5. New vehicle from stock with day registration 17.08.2023! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, intermediate sale and errors excepted! Hodpfox Npcgsx Ah Uog

Condition: new, functionality: fully functional, power: 403 kW (547.93 HP), operation weight: 47,500 kg, Year of construction: 2022, operating hours: 41 h, Dear interested party, please find below the details of the investment on offer. Stock number 1440-103 Additional options rental possible, ex demo Hedpfx Ahjq U Swyo Ueg General rating (1:bad; 5:like new) condition icon iconcondition iconcondition iconcondition iconcondition icon 5/5 Service weight 47500 convert_weight Crusher type Cone crusher Emission class Emission class 5 / Tier V Engine C15 Engine manufacturer CAT Production capacity (t/h) 300 Feed size (mm) 0-700 Transport dimensions (L x W x H) 18000x3500x3800 mm Country of production Finland Delivery conditions EXW Certificates EPA, CE Additional equipment Feed hopper rigid, with separate feed chute and pre-screen Capacity: approx. 5.00 m³ Width: approx. 2.90 m Length: approx. 3.20 m Loading height: approx. 2.90 m Hydraulically folding and lockable bunker walls Bjw7erffl90 Belt feeder H12-8 Width: 1,200 mm Length: 8,000 mm Belt: EP630/4 incl. metal detector Crusher type: Nordberg HP300 cone crusher Feed opening: max. 235 mm Extended main conveyor H12-12 Belt width: 1,200 mm Length: 12,000 mm Discharge height: 3.70 m Diesel unit for system operation Engine: CAT C15 diesel engine, Stage V, with exhaust silencer and intake filter Power: 225Kw Control panel: Switches, measuring and display instruments Diesel tank: approx. 375 l Infinitely variable crusher speed adjustment Refueling pump for diesel unit 71kVA generator Radio remote control Water spraying with pump Feed material: Natural stone, concrete, asphalt, construction waste Throughput rate: up to 300 t/h (depending on feed material) Feed piece size: 0/700 mm (max. room diagonal) If you have any further questions, please do not hesitate to contact us! The offer is subject to change. The information provided is for descriptive purposes only.

Condition: used, Year of construction: 2018, operating hours: 6,031 h, functionality: fully functional, Basic Package SM620 Plus: Central axle trailer chassis with 2 axles, 80 km/h EU road approval Braking system including ABS and lighting according to EU directive 50 mm EU towing eye, incl. mounting shoe Hydraulically adjustable support legs at the front on both sides and rear right Splash protection (inner and side mudguards) Tyres 435/50 R19.5 Permissible total weight 19,000 kg Deutz diesel engine TCD 3.6 L4, 85 kW at 1,800 rpm, compliant with emission standard EUROMOT TIER IV Final Hydraulically reversible fan at water and oil cooler Complete engine unit can be swung out Fuel tank 300 litres Feed hopper 5.0 m³ capacity Stone grid preparation Hydraulically folding side conveyor: belt length 5,500 mm, belt width 1,000 mm Hjdpfxoxx R Rhs Ah Usg Hydraulically folding rear conveyor: belt length 5,500 mm, belt width 1,000 mm Hydraulic support cylinder between side and rear conveyor Emergency stop switches at side and rear conveyors Load-dependent material feed from conveyor floor to screening drum Continuously variable screening drum speed from 0 - 20 rpm Continuously variable hopper belt speed from 0 - 0.17 m/s Control box at the rear of the machine with the following functions: emergency stop switch, folding/retracting the rear conveyor, folding/retracting the side conveyor, side conveyor inclination and load control +/-, automatic mode on/off From the operator panel: fold/unfold side conveyor Hydraulically folding cleaning brush with individual brush segments and spring tines Centrally arranged wear strips 24 V electric control Underrun protection rear Side collision guard front (reinforced version) and rear both sides Hydraulic quick coupling between rear conveyor and machine Acoustic start-up warning, door monitoring Doppstadt telematics system Paintwork: RAL2011 deep orange Basic version without screening drum Optional equipment: Flow divider on rear conveyor Delivery date by arrangement

Condition: ready for operation (used), SBM Austria stationary crushing plant consisting of: *Hopper *Vibrating chute: 3500 x 1000 mm driving: two pieces vibration motors of each 4 kw. *Grizzly screening machine 2000 x 1000 mm, 2 decks driving: 11 kW e-motor. *Percussion crusher type: RHS 13/11/4 feed opening: 1100 x 1000 mm driving: 160 kW e-motor. *Including steel construction and discharge conveyors. Hsdpfxjx Evc Sj Ah Ueg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, Conveyor belt installation: capacity 1,500 tons/hour, with feed hopper (dimensions: 4,500 x 4,500 mm). Hopper made of 8 mm steel plate with reinforced edges. Conveyor belt is pivotable. Start section mounted on slewing ring. Length: 35 meters. Hedjx Apzyspfx Ah Ueg

Condition: new, Year of construction: 2016, -1- unused pressure plate for Krupp, O&K, Weserhütte ES jaw crusher EB 1200 x 960, dimensions approx. 1150 x 530 x 130 mm, wedge 70 mm Hodswqf Dpjpfx Ah Ujg

Condition: used, mileage: 1,001 km, gearing type: other, color: white, first registration: 01/2015, Year of construction: 2015, driver cabin: other, Vehicle location: Bovenden. Superstructure: Liebherr concrete mixer HTM 904F 9m³ on Dautel WS4 interchangeable system. The concrete mixer is part of an interchangeable system (Dautel WS4) with a VDL SK-25-5700 roll-off device with push-articulated arm for containers up to 7 m in length. The interchangeable system was removed from an Arocs 3240 8x4 with a 4250 mm wheelbase. Interchangeable system and roll-off device available at extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors! Hjdex H Twcjpfx Ah Ueg

Condition: used, Year of construction: 2019, operating hours: 4,943 h, functionality: fully functional, Shredder Willibald EP 5500 Manufacturer: Willibald Model: EP 5500 Shark II Year of manufacture (according to nameplate): 2019 Operating hours (read off): 4,943 Hedpfxsw Imy Eo Ah Ueg Base machine – Shark II – 32 – 2-axle drawbar chassis, MAN engine 520 hp, Stage IV, flail set 32er with tungsten carbide, rubber belt; neodymium magnet; hydraulic, extended 4.5 m, steel motor hood, standard; central lubrication with pump; EP 5500 hydraulic support leg; extended feed hopper, hydraulically foldable; standard paintwork; cross-diagonal shredding flaps; standard hydraulic oil; 24V road lighting system as per StVO – EP 5500 decals & documentation – language: German; hydraulic quick-change hub system 32er; radio remote control; crawl drive; towing eye 50 mm; special equipment – 3-part basket screening system – compressed air hose – special decals; cross-diagonal shredding insert, welded; compressed air hose package for tools. Various spare parts Net purchase price plus statutory VAT. VAT will be shown separately on our invoice. Subject to change, errors, and prior sale. Sale is without warranty or guarantee and only to businesses. Enquiries will be processed Monday to Friday between 8 a.m. and 4 p.m.

Condition: used, Year of construction: 2023, operating hours: 119 h, functionality: fully functional, Basic Package Inventhor Type 6 Load-sensing system 500-liter fuel tank Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally arranged wear strips 24 V electrical control – additional electric pump to operate the following functions when the engine is off: Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional Equipment: 260 kW power train – EV 3-axle drawbar chassis unit Hedoxx Sbnepfx Ah Ueg Shredding system Size L – 20 teeth Auxiliary hydraulic connections 35–80 l/min Hydrostatic drive Hopper extension 350 mm, watering device both sides 7 m rear conveyor belt Overband magnet – Neodymium Frame for 7 m overband magnet Delivery date to be agreed

Year of construction: 1990, condition: repair required (used), Mobile jaw crushing system, operating hours approx. 10.000, engine Caterpillar 6 cylinders with generator set approx. 35 KVA, year of construction approx. 1990, jaw crusher KUE-KEN (KK114 inlet 1140 x 750 mm) incl. magnetic tape (iron separator), total weight 48 tons on semi-trailer chassis. Condition: Motor and conveyor systems run perfectly, only the drive shaft of the crusher is defective (damage approx. € 17.000) Hsdshz Dmgjpfx Ah Ueg

Condition: like new (used), functionality: fully functional, gearing type: automatic, fuel type: diesel, fuel consumption per hour: 4 l/h, fuel tank capacity: 60 l, empty load weight: 4,500 kg, operation weight: 13,000 kg, Year of construction: 2023, operating hours: 300 h, machine/vehicle number: KMS43034, Equipment: UVV, hydraulics, onboard computer, Kimera S430 Concrete/Liquid Soil/Cold Asphalt/Substrates Calibratable for Quality Monitoring Output (liquid): 30 cbm/h Output (moist earth): 20 cbm/h Cement silo: 1,450 kg Water tank: 800 L Hopper 1: 2.5 cbm Hopper 2: 2.5 cbm Additive containers for retarders etc. Kubota diesel engine Central lubrication points Water connection with pre-filter Automatic cement refilling (silo operation) Hsdpfewx Shqox Ah Ueg Siemens PLC for recipe management Up to 100 recipes programmable Includes recipe printer Automatic interim cleaning system Water adjustment during mixing process External vibrators for Hopper 1 and 2 – 2 units Fill level indicator for cement silo including external vibrator Hydraulically lowerable and swiveling discharge outlet Forklift pockets Suitable for mobile, semi-mobile, and stationary use! Cleaning within 15 minutes High-pressure cleaner included Machine still in operation! Unit will be handed over cleaned! Immediately ready for operation! Ideal for landscaping, building materials trade, agriculture, and Lego production! Unit comes from landscaping sector, acquired for small batch production. Due to large projects and higher volumes, it is no longer economical – minimum quantity surcharge is waived, delivery flat rate is waived! Delivery and financing available! Cement silo (30 tons) and filter available as an option, incl. vibrator, screw conveyor, and control system Price: €25,000 net Errors and prior sale reserved! Sale exclusively to commercial customers!

Condition: used, -1- used vibrating feeder/dosing feeder, trough dimensions approx. 1000 x 460 x 250 mm, including unused Aviteq control unit Hedpfx Ahsu Spp Rs Usg

Condition: used, mileage: 227,249 km, power: 309 kW (420.12 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 26,000 kg, empty load weight: 13,025 kg, maximum load weight: 12,975 kg, tire size: 315/80R22.5, axle configuration: 8x4, number of seats: 2, first registration: 07/2017, next inspection (TÜV): 02/2026, emission class: euro6, brakes: engine braking, suspension: steel, loading space volume: 9 m³, driver cabin: day cab, wheelbase: 4,300 mm, Equipment: ABS, air conditioning, cabin, differential lock, navigation system, onboard computer, Vehicle location: Bovenden, steel body, metal cab, suspension seat, rear window, electric mirrors, heated mirrors, sun visor, navigation system, ABS (anti-lock braking system), automatic transmission, differential lock, beacon, leaf suspension, alloy wheels, underbody protection, green environmental badge. Wheelbase: 4300 mm Body: concrete mixer STETTER Type AM 9 approx. 9m³, traverse for trailer coupling, disc brakes at front and rear axles! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, intermediate sale, and errors! Hodpfxex H Twio Ah Ueg

Condition: excellent (used), Manufacturer: Aubema Model: 2600 Rotor diameter: 1400 mm Hedpfxjxzq Hnj Ah Uog Rotor width: 2400 mm Drive motor: 400 kW Final product: less than 350 mm

Condition: used, Year of construction: 2023, operating hours: 2,798 h, functionality: fully functional, Basic Package AK 640 SA: Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting in accordance with EU regulations Tires: 385/65 R22.5 Gross vehicle weight 32,000 kg Hydraulically adjustable support legs Splash guards (inner and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, compliant with EUROMOT V emission standard Auxiliary hydraulic connection 20 l/min Load-dependent feed control incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank: 2 x 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: 'Streusel plus' flail tip Impact plate with teeth Centrally arranged wear strips Electric pump for cylinder functions (e.g. lifting/lowering support legs and opening/closing rear basket, folding/unfolding rear conveyor, disengaging drive) when engine is off 24V electrical system Separate switch box at the rear of the machine Hydraulically folding fine shredding basket "Multimesh" (mesh size between 30 - 280 mm, gradations on request), incl. one-piece rear flap Hodpfexx Rrrjx Ah Ujg Rear discharge conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic center section Lower conveyor: belt length 3,800 mm, belt width 1,400 mm Engine compartment protection plate (material: Hardox) Moistening system for external water connection Scraper floor with 71 slats Wear protection in drum area Reinforcement plates on both sides of the feed hopper (made of wear-resistant steel) Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional Equipment: Hydraulic drive Fine shredding basket Scraper floor chain lubrication Lighting package: engine compartment and rear conveyor LED lighting package (scraper floor and infeed) 'Bear Paw' flail tips Delivery date by arrangement Available from 04/2026

Condition: excellent (used), Year of construction: 2001, BHS MOBILE CONCRETE AND STABILIZATION PLANT, YEAR OF MANUFACTURE 2001 Aggregate hopper 3x20 m³ Hsdpfx Ahsx I A N Do Ujg Cement silos 2x60 t Feeders manufactured by ARCEN Control system Capacity: 600 t/h

Condition: used, mileage: 50,500 km, power: 302 kW (410.61 HP), gearing type: mechanical, fuel type: diesel, color: white, overall weight: 32,000 kg, empty load weight: 14,370 kg, maximum load weight: 17,630 kg, tire size: 315/80R22.5, axle configuration: 8x4, number of seats: 2, first registration: 03/2017, emission class: euro6, brakes: constant throttle, suspension: steel, driver cabin: day cab, wheelbase: 4,250 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, immobilizer system, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: incoming / in transit, house registration, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, radio-CD, cruise control, air horn, 16-speed manual transmission, ABS (anti-lock braking system), constant throttle, PTO (power take-off), vertical exhaust, differential lock, leaf suspension, aluminum fuel tank, aluminum rims, low-noise G1, 2nd axle with steered lift axle, folding underrun protection, roof hatch, green emissions sticker. Wheelbase: 4250 mm. Body: STETTER concrete mixer type AM9/8 FHC-UltraEco approx. 9m³, rear axle with planetary hub reduction (HR), LED daytime running lights, selector switch for start and maneuvering modes, prep for toll system, prep for telematics system, reverse warning beeper, radiator cover under bumper, luxury driver seat, fuel tank capacity: 290 l, mixing drum made of 400 HB wear-resistant steel, start-stop system, Bosch Rexroth hydraulic pump, integrated hydraulic motor, oil cooling system, ZF CML series transmission, 500 l pressurised water tank, 5 m liquid concrete piping. Available immediately! All information without guarantee as the vehicle is incoming! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Hjdpfx Asx Akw Aoh Ujg

Condition: used, Year of construction: 2024, operating hours: 630 h, functionality: fully functional, Basic package AK565 Plus: Hsdpfsxx R Akox Ah Uog MTU diesel engine 6R1300, 390 kW at 2,000 rpm, EUROMOT V compliant Central axle trailer chassis with 3 axles, road approval for 80 km/h Braking system incl. EBS and lighting according to EC directive 50 mm EC towing eye incl. slip-on shoe Tires: 435/50 R 19.5 Hydraulically adjustable support leg Splash guards (internal and side fenders) Permissible total weight: 22,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, meets EUROMOT V emission standard Exhaust air directed upwards Load-dependent material feed control incl. automatic reversing of the scraper floor Fuel tank: 600 liters Feed roller: length 1,690 mm, diameter 510 mm, with fitted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable "Dopplock" flail tips Standard: "Streusel plus" flail tip Impact plate with teeth Centrally positioned lubrication strips Electric pump for cylinder functions (e.g. raising/lowering support leg and opening/closing rear hood, folding in/out discharge conveyor, releasing drive) when engine is off 24 V electric control system Separate control box at the rear of the machine Hydraulically folding fine shredding basket "Multimesh" (mesh size between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Separate drive for feed roller / scraper floor - "Twin Drive" Rear discharge conveyor with anti-magnetic center piece - belt length 6,000 mm, belt width 1,800 mm, discharge height 4.2 m – height adjustable Underbelt - belt length 1,400 mm, belt width 1,750 mm Extended radio remote control with 2 foot switches Drive system preparation Reinforcement plates for the intake hopper (material: Hardox), both sides for side wall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: Hydraulic drive system Additional hydraulic connection 20 l/min "Bear Paw" flail tips Impact plate with strike bar and tooth row Neodymium magnetic roller incl. chute NEODYM overband magnet for rear discharge conveyor Frame for overband magnet Moistening system LED lighting package: engine compartment and rear discharge conveyor Delivery date by arrangement

Condition: used, Year of construction: 2022, operating hours: 2,380 h, functionality: fully functional, Base package AK 315: Central axle trailer chassis with 2 axles, road approval for 80 km/h Braking system incl. EBS and lighting according to EU directive Tyres: 385/65 R22.5 50 mm EU drawbar eye including slip-on shoe Hydraulically adjustable support leg Splash guard (internal and lateral mudguards) Permissible total weight: 16,000 kg MTU diesel engine 6R 1000, 230 kW at 2,200 rpm, complies with EUROMOT V emissions standard Load-dependent feed control incl. automatic scraper floor reversal Hydraulically folding green waste grid basket with rear tailgate Impact plate with teeth Fuel tank: 300 litres Feed roller: Length 1,420 mm, diameter 510 mm, with mounted tooth segments Double-row flail drum with 16 free-swinging cast steel flail holders, replaceable flail tips, and 28 fixed ripping teeth Standard: “Streusel plus” flail tip Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raise/lower support leg, open/close rear basket, fold/unfold rear conveyor, release travel drive) when engine is off 24-V electrical control Separate control box at the rear of the machine Scraper floor with 29 slats Chain drive feed roller and scraper floor Extended radio remote control with 2 foot switches Acoustic start-up warning Rear conveyor: 6 m, 1,500 mm wide with anti-magnetic center section Reinforcement plates (Hardox) on both sides of the feed hopper for the side walls (loading edge) Travel drive preparation Hsdoxx Sdpjpfx Ah Ueg Fire extinguisher Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: Hydraulic travel drive Extended radio remote control with foot switch “Bear Claw” flail tips Fine-shredding basket Watering system Lighting package: engine compartment and rear conveyor Delivery date by arrangement

Condition: good (used), Year of construction: 2020, operating hours: 590 h, functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-link Additional hydraulic connection 70 l/min 24 V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding hopper with position sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Hedpfxjvnq Rks Ah Ueg Additional equipment: Rubber quick-change pad Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the machine Irrigation LED work lighting Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3

Condition: used, Year of construction: 2018, operating hours: 6,800 h, functionality: unexamined, Basic package AK560: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC Directive 50 mm EC towing eye incl. guiding shoe Tires 385/65 R22.5 Hydraulically adjustable support leg Splash protection (inner and side-mounted mudguards) Permissible total weight 19,000 kg Mercedes/MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT IV emissions standard Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: "Streusel" flail tip Centrally arranged wear strips Electric pump for operating cylinder functions (e.g., raising/lowering support leg and opening/closing rear basket, folding/unfolding rear conveyor, releasing travel drive) when engine is off 24 V electrical control Separate control box at the rear of the machine Hydraulically folding fine shredding basket (mesh size between 30 - 280 mm, gradation on request) incl. rear flap Scraper floor with 32 strips Complete radio remote control Preparation for travel drive Acoustic start-up warning Paint finish: RAL2011 deep orange Additional equipment: Special paint in DB6841 MB-Trac Green Hodpfxoxx Rvkj Ah Ueg Hydraulic travel drive Fuel tank 600 l Fine shredding basket Rear conveyor 4 m, belt width 1800 mm Separate drive for feed roller and scraper floor Reinforcement plates on both sides of the feed hopper sidewalls Impact plate with wear strip and additional tooth row Delivery date by arrangement