Used Mobile Juice Press for sale (17,740)

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, control type: CNC control, controller manufacturer: Delem, bending force (max.): 50 t, working width: 1,280 mm, stroke length: 215 mm, number of axes: 4, Equipment: CE marking, foot remote control, Used Trumpf Trumabend V 50 Hydraulic cnc 50ton x 1.2metre Press Brake For Sale Brand: Trumpf Type/Model: Trumabend V50 Year:2000 Trumabend V 50 Technical details Capacity: 50ton x 1.2metre: Nedsx Nip Hjpfx Aacjku Full bed length: 1280 mm CNC Brand: Delem Total axis: 4 Y1, Y2, X and R Axis

Condition: ready for operation (used), Year of construction: 2023, operating hours: 3,200 h, functionality: fully functional, machine/vehicle number: 189, power: 310 kW (421.48 HP), fuel tank capacity: 500 l, TECHNICAL DETAILS Nedoym U E Hopfx Aaceku Cutter drum with teeth: 30 Areas of application: Waste/Wood/Green waste MACHINE DETAILS Engine power: 310 kW (405 hp) Fuel tank capacity: 500 l Electrical system: 24 V Hydraulic connections: 35-80 l/min Permissible total weight: 27,000 kg Load capacity protection: Three-sided Operating hours: 3,200 h EQUIPMENT Overband magnet Shredder drum with 30 teeth Caterpillar engine Load-dependent system Centrally arranged lubrication strips 24 V electronic control with additional electric pump Complete radio remote control Large maintenance doors on the sides Service-friendly engine compartment Hydraulically reversible fan Folding hopper Service staircase Acoustic start-up warning Doppstadt telematics system Special shredder system size L 600/4 - 30 Z Additional hydraulic connections Hydraulic drive Discharge conveyor Frame with overband magnet Magnet and combs

Condition: ready for operation (used), controller manufacturer: TS1 Touch, installation height: 515 mm, operating speed: 20 mm/s, reverse speed: 90 mm/s, total length: 3,400 mm, total width: 1,850 mm, total height: 2,260 mm, power: 9 kW (12.24 HP), travel distance Z-axis: 265 mm, empty load weight: 6,000 kg, passage width: 2,550 mm, boven- en ondergereedschap van Wila/Modufix 7 assen: Y1 / Y2 / Y3 / X / X' / R / Z1 / Z2 Y3 = onderste tafel, in hoogte verstelbaar De onderste tafel fungeert tevens als dichtdrukmatrijs (pneumatisch). Er is ook (elektrische) doorbuigingscompensatie in de onderste tabel. Capacity: 50 ton x 2550 mm Backgauge: CNC Njdox Imkfjpfx Aacoku Max distance between table -- ram: 415 > 575 mm (variable) Locking speed: 90 mm/sec

Condition: new, new all stainless steel discharging height ± 1.770 – 2.250 mm chain break system Njdpfx Ajymxgzjacjku 400V – 50 Hz Motor 1.1 kw mobile

Condition: excellent (used), Used Amada 60ton C frame press for sale SPECIFICATION MODEL TP -60 CAPACITY 60 ton NUMBER OF SLIDE STROKES 50 Hz 45-80 strokes/ minute STROKE LENGTH 120 mm SLIDE ADJUSTMENT 70 mm SLIDE AREA (R-L x F-B) 500 x 400 mm BOLSTER AREA & THICKNESS (R-L x F-B x thickness) 900 x 550 x 80 mm SHUTHEIGHT 370 mm Nkjdpfjyk D Dtex Aaceu MAIN MOTOR 5.5 x 4 kWXP AIR PRESSURE REQUIRMENT 5.0 kgf/cm2 MAXIMUM NUMBER OF FLYWHEEL ROTATIONS 1170 r.p.m. MINIMUM AIR PRESSURE FOR CLUTCH ON STOPPING TIME 165 msec BRAKE MONITOR SETTING, DEGREES BEYOND T.D.C. 15 degree SERIAL NO. 07312665 MANUFACTURE DATE 1992.4 MANUFACTURED BY AMADA CO., LTD.

Condition: used, lifting height: 17,300 mm, Year of construction: 2019, operating hours: 2,399 h, Weights Empty weight: 2.400 kg Functional Lifting capacity: 3.200 kg Identification Serial number: AMC4401 Njdsynfw Njpfx Aaceku Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Counterweight: 0 Transport dimensions (LxWxH): 3.5x0.77x1.96 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), Continuous pasta press for short and long pasta. Bought for a project and never used. Nodpfx Aaeyh Rdfocsku

Condition: used, Year of construction: 1981, total height: 2,300 mm, total width: 1,100 mm, total length: 2,000 mm, Empty weight: 500 kg Price: On request - Year: 1981 - Documentation available: No - CE certificate present: No - Press force [ton]: 63 Nksdpfxjxhcgyo Aacou - Throat depth [mm]: 250 - Transport dimensions: 2000mm x 1100mm x 2300mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2011, total length: 4,800 mm, total width: 1,800 mm, total height: 2,250 mm, Weight: 8.200 kg Price: On request - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 91898 - Drive system: CNC - Control system brand: HACO - Control system type: ATL 565 Nkodpfx Aajymlabecju - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 100 - Max. working width [mm]: 3600 - Column gap [mm]: 3300 - Throat depth [mm]: 250 - Backgauge depth [mm]: 600 - Max. stroke [mm]: 120 - Crowning system: Mechanical - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 4800mm x 1800mm x 2250mm (l x w x h) - Transport weight [kg]: 8200kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1998, condition: good (used), AMADA PROMECAM ITS2 2512 CNC PRESS BRAKE MAKE AMADA PROMECAM, MADE IN FRANCE MODEL ITS2 2512 YEAR 1998 CONTROL OPERATEUR 2 TONNAGE 25 TONS LENGTH 1250.0 mm NO OF AXES 4 AXIS CNC GUARDING SICK OPERATOR LIGHT GUARD TOOLING FULL SET OF CLAMPS Nedpfx Aspz Igioacsku PLUS UPSTROKING HYDRAULIC PRESS BRAKE FOOT CONTROL PENDANT FULL SET OF MANUALS FULL SET OF CLAMPS SET OF TOP AND BOTTOM TOOLING

Condition: used, Bystronic Xpert 150 Brake Press with Bystronic CNC Control, 4100mm Bed, Max Force 1500kw, Max Stroke 215mm, Auto Back Stop 3 Axis, Bystronic Fast Bend Laser System. S/No. 11530057 (2011) Machine Weight 11,800kg. Country of Origin: Germany Nksdpfx Aeyid Efjaceu Location: These lots are located in Hull, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Amada HFE M2 5020 Brake Press with Amada CNC Control & Hand Remote, 2100mm Bed, Amada Quick Change Tooling System, Max Force 500kw, Max Stroke 200mm, Auto Backstop 3 Axis, Sick Light Guards. S/No. HFE MZ 5020 D100529 (2012) Machine Weight 4,700kg. Country of Origin: France Nkedpfx Aeyid A Rjacsu Location: These lots are located in Hull, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Amada HFE M2 1704 Brake Press, 4100mm Bed with Amada CNC Control & Hand Remote, Amada Quick Change Tooling System, Max Force 1700kn, Max Stroke 200mm, Auto Backstop 3 Axis, Sick Light Guards. S/No. HFE MZ 1704 K100879 (2015), Machine Weight 13,800kg. Country of Origin: France Nsdpfx Aajyidz Tocjku Location: These lots are located in Hull, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Bystronic Beyeler Xpert 250 Brake Press with Bystonic CNC Control, 5100mm Bed, Hydraulic Tool Clamping, Max Force 2500kw, Max Stroke 265mm, Auto Back Stroke 265mm, Auto Backstop 3 Axis, Fiessler Electronik Sensor System. S/No. 8710001 (2008), Machine Weight 26,000kg. Country of Origin: Germany Njdpfx Aajyidx Eocjku Location: These lots are located in Hull, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Year of construction: 2018, condition: used, This listing is for the Bigneat Chemcap Ductless Fume Cabinet on Mobile Cabinet The unit is in full working condition and is ready for immediate use The Bigneat Chemcap Ductless Fume Cabinet is a recirculating fume hood designed to protect laboratory users from hazardous fumes, vapours, gases and particulates without the need for external ductwork. Instead of venting contaminated air outside a building, it draws air into the cabinet, filters it, and then returns clean air back into the room. This makes it ideal where installing conventional ducted extraction would be difficult, costly or disruptive. Filtration & Safety Chemcap™ carbon filtration: specialised carbon media to capture a wide range of chemical vapours. Optional HEPA filtration: for removing particulates as well as gases (available on some models). Recirculatory operation: cleans and returns air to the room, eliminating hazardous external emissions and reducing energy loss Usability & Convenience Benchtop or stand-mounted: sits on a lab bench or on dedicated support furniture. Portable and easy to install: no need for building ductwork. Clear acrylic panels: offer all-round visibility of the workspace Key Features & Benefits Ductless, recirculatory filtration: No connection to external ventilation required — ideal when installing ducted fume cupboards is impractical or costly. Chemcap carbon filters: Capture and retain hazardous chemical fumes and vapours; available in different types (e.g., organic, acid) depending on application. Nkedpfx Ajyliy Ajaceu Optional particulate (HEPA) filtration: Adds protection against fine aerosols when required. All-round “Clearview” visibility: Transparent panels and enclosure give excellent 360° visibility of the interior. Portable: Stand-alone units that can be sited on or off benches as needed. User controls & safety: Touch-button control panel, service-due indicator and audible low-airflow alarm help ensure effective operation. Quiet and efficient: Typically operate below ~50 dB, with controlled airflow (face velocity ~0.5 m/s). Lockable access: Hinged doors and lockable front access help maintain containment. Chemical-resistant construction: Materials like epoxy-coated metal and clear acrylic resist corrosion and are easy to clean. Typical Applications These cabinets are used in labs where occasional or varied chemical handling creates hazardous fumes but installing full ductwork is not practical — for example: Small labs or teaching environments Supplementary fume control where existing fume cupboards are fully used Research or analytical workflows with intermittent fume-generating procedures Touch-button controls with a service-due indicator. Quiet operation (~

Condition: used, Year of construction: 1989, total height: 2,900 mm, total width: 1,800 mm, total length: 2,000 mm, Empty weight: 5.600 kg Price: On request - Year: 1989 - Documentation available: No - CE certificate present: No - Serial number: 122692 - Drive system: Conventional - Press force [ton]: 63 Njdpfsw Hzvmjx Aacjku - Throat depth [mm]: 140 - Motor power: 7.0kW - Transport dimensions: 2000mm x 1800mm x 2900mm (l x w x h) - Transport weight [kg]: 5600kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), passage width: 1,100 mm, power: 55 kW (74.78 HP), empty load weight: 26,000 kg, CNC Hydraulic deepdraw- transfer press line !! 4 dies available: 2 in use 2 reserve !! Equipped with HMS doublehead decoiler and HMS straightener HMS Straightener RS 87-03/0 Nksdpfsyl A Hijx Aacju max bandwidth: 300 mm 7 straightening rolls at Ø 80 mm 2 (pneumatic) drawing rolls atØ 120 mm speed: 2-10m/min bandthicnkess: 0,8 - 3 mm HMS decoilerBA 3.3-03/040 max bandwidth: 300 mm max coilweight: 4 ton inner coildia:Ø508 mm outer coildia:Ø 1500 mm hydraulic system: 2,2kW - 100 bar - 11l/min Automatic CNC Feeder (HMS PSV-3-S0) Automatic toolchangingsystem Stroke in table: 150 mm Stroke in cushion: 100 mm Capacity: 200 Ton Max ram adjustment: 400 mm Command (feet/Double hand): CNC Max distance between table - ram: 1000 mm Dimensions of the table: 1000 x 1000 mm dimensions stamp: 1000 x 1000 mm Max counter-pression table: 35 Ton Max counter-pression ram: 2 x 1 Ton

Condition: ready for operation (used), total height: 2,110 mm, total width: 2,240 mm, total length: 900 mm, passage width: 1,500 mm, power: 2.2 kW (2.99 HP), empty load weight: 1,250 kg, load capacity: 125,000 kg, width of table: 420 mm movable cylinder electro hydraulic two speed: fast slow Max ram adjustment: 400 mm Drawningspeed: fast 9mm/sec - slow 2,5 mm/sec Returningspeed: 12 mm/sec Max distance between table - ram: 925 mm Courant needed: 380/400V Nksdpjyl A Exjfx Aacou

Condition: ready for operation (used), total height: 3,550 mm, passage width: 3,000 mm, empty load weight: 25,000 kg, load capacity: 575,000 kg, with 6 oil heated plates, thickness 50 mm (drilled with oil canals) 8 cilinders with a dia each of 150 mm closing time: 24 seconds Optional: Boiler to heat up oil which is used inside the tables -click here Furnierpressen - Conveyor press - Composit press - Heizplattenpressen Max ram adjustment: 520 mm Max distance between table - ram: 700mm Nedpfeyl A Igox Aaceku Dimensions of the table: 3000 x 1650mm

Condition: ready for operation (used), total height: 2,800 mm, total width: 1,800 mm, total length: 4,300 mm, empty load weight: 8,000 kg, Forming press for leather, textiles, hardboard etc... + roller system width 2500 mm Njdjyl A Iajpfx Aacoku Capacity: 50 Ton Max distance between table - ram: 175 mm Dimensions of the table: 2850 x 1250 mm dimensions stamp: 800 x 800 mm

Condition: ready for operation (used), total width: 1,900 mm, total length: 3,200 mm, empty load weight: 42,000 kg, Soenen dieptrekpers 400 ton Capacity: 400 Ton Max ram adjustment: 850 mm Drawningspeed: 300 mm/sec Workingspeed: 20 mm/sec Returningspeed: 300 mm/sec Max distance between table - ram: 1400 mm Dimensions of the table: 2200 x 1100 mm Max counter-pression table: 160 Ton Adjustable ram / counter-pression: 350 mm Electric motor (power): 125 CV Nodpfeyl A E Sjx Aaceku Height: 5800 + 1800 mm

Condition: ready for operation (used), controller manufacturer: 2D Touch, throat depth: 300 mm, operating speed: 10 mm/s, reverse speed: 79 mm/s, power: 20 kW (27.19 HP), travel distance Z-axis: 200 mm, empty load weight: 10,000 kg, passage width: 2,550 mm, 6 axes: Y1 / Y2 / X / R / Z1 / Z2 upper and lower hydraulic clamping Willa/Modufix tooling 2D touchscreen control Capacity: 110 ton x 3100 mm Nodpfx Aoylqnuoacoku Backgauge: CNC Locking speed: 100 mm/sec

Condition: good (used), Year of construction: 2016, operating hours: 47,624 h, Just arrived, more pictures and a video to follow Baler Avermann, Type AVOS 1410 BR5 – 45/80, pressing force 80 t, year of manufacture 2016 Technical data: Manufacturer: Avermann Maschinenfabrik Type: AVOS 1410 BR5 – 45/80 Year of manufacture: 2016 Pressing force: 80 t Drive power: 45 kW Feed opening: 1,400 x 1,000 mm Throughput at 35 kg/m³: 6.0 t/h Throughput at 60 kg/m³: 10.5 t/h Throughput at 100 kg/m³: 17.5 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 600 kg, depending on material Tying: 5-fold vertical, automatic Machine dimensions: approx. 10,850 x 2,400 x 3,800 mm (LxWxH) Machine weight: approx. 18,000 kg Nsdpfx Aajx Uzy Uecjku Note: The baler was dismantled from running operation. A suitable WESTERIA conveyor belt is optionally available. The main cylinder was replaced in November 2025. Further pictures available on request. Please feel free to contact us. Please note: All technical specifications are based on manufacturer’s information. We accept no liability for the accuracy of these details or for errors. This offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by arrangement. Sale is ex-works, advance payment only, without warranty or guarantee.

Condition: like new (used), Year of construction: 2019, operating hours: 66 h, functionality: fully functional, Size 60 x 75 cm, Presscenter XL 2, program-controlled wash-up device for inking rollers, blanket wash, and impression cylinder wash, Alcolor Vario dampening system, Combistar air-cooled cooling and recirculation unit, Autoplate, antistatic device in the feeder, double sheet detector, Weko AP 262 powder spray unit, AMS LED UV dryer, maximum paper thickness 0.8 mm, maximum speed 15,000 sheets/h, perfecting 2-3 or 5- Nkodpfx Ajykr Rzoacou

Condition: excellent (used), Year of construction: 1913, operating hours: 194 h, functionality: fully functional, Size 53 x 74 cm, CP 2000, Easycontrol, Alcolor dampening, Autoplate, All washers, High Pile delivery Nkodpjykrugjfx Aaceu