Used Mori Seiki Nz 1500 for sale (203)

Condition: used, Year of construction: 2010, turning diameter max. 320 mm turning length 810 mm control MSX 701 Dsdpfx Aijv E R E Aozswd Number of revolutions max. 6.000 U/min power capacity - main spindel 22 / 18 kW max. usable bar diameter 52 mm C-Axis 0,001 ° spindle nose JIS A2-5 collet chuck 140 mm Number of revolutions max. 6.000 U/min power capacity - Sub spindle 22 / 18 kW max. usable bar diameter 52 mm C-Axis 0,001 ° spindle nose JIS A2-5 collet chuck 140 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm b-axis 900 mm total power requirement 86 kVA weight of the machine ca. 8,1 t dimensions of the machine ca. 8,0 x 3,5 x 2,8 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 1500 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions

Condition: used, Year of construction: 2008, turning diameter max. 320 mm turning length 810 mm Dodpfx Aijtqmqwszewd control MSX 701 MAPPS III standard turning dia. 200 mm Main spindle: Number of revolutions max. 6.000 min/-1 power capacity - main spindel 22 / 18,5 kW Bar feed max. 52 mm spindle bore 61 mm C-Axis 0,001 ° Subspindel: Number of revolutions max. 6.000 min/-1 power capacity - Sub spindle 22 / 18,5 kW Bar feed max. 52 mm spindle bore 61 mm C-Axis 0,001 ° Turret 1 + 3: number of toolpositions je 16 pos. Number of driven toolspositions je 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 (+65 / -45) mm Turret 2: number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 (+45 / -65) mm axis stroke: x-travel 1-3: 210 mm y-travel 1-3: 110 mm z-travel 1+3: 300 / 2: 810 mm total power requirement 90 kVA weight of the machine ca. 9,3 t dimensions of the machine ca. 4,5 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 1500 T3Y3 - Main- and Subspindle - 3 turrets, 2x upper / 1x below - 3x Y-Axis - 3x 16-pos. tool-drive - incl. 28x collets - incl. Hainbuch changing device

Year of construction: 2008, condition: ready for operation (used), A Mori Seiki CNC turning and milling center with counter spindle including automation is available. Tool turrets: 3, tool stations: 3×16, live tools: all stations, X-axis travel: 210mm, Z1/Z2/Z3-axis travel: 300mm/810mm/300mm, main spindle bore: 55mm, spindle speed: 6000rpm, automation robot: LR Mate 200iC 5L, payload: 5kg, reach: 892mm, repeatability: 0.03mm. Machine dimensions X/Y/Z: approx. 3800mm/2700mm/2500mm, weight: approx. 8900kg, control: Fanuc 31i-A, power-on hours: 101035h, operating hours: 68322h, process hours: 34697h. Including an automated CO2 fire detection system, transformer, machine extraction system, 4× workpiece carriers and an automatic diameter detection system. Documentation available. An on-site inspection is possible. Dsdjzlt R Dspfx Aizjwd

Year of construction: 2008, condition: ready for operation (used), A Mori Seiki CNC turning and milling center with counter spindle including automation is available. Tool turrets: 3, tool stations: 3×16, live tools: all stations, X-axis travel: 210mm, Z1/Z2/Z3-axis travel: 300mm/810mm/300mm, main spindle bore: 55mm, spindle speed: 6000rpm, automation robot: LR Mate 200iC 5L, payload: 5kg, reach: 892mm, repeatability: 0.03mm. Machine dimensions X/Y/Z: approx. 3800mm/2700mm/2500mm, weight: approx. 8900kg, control: Fanuc 31i-A, power-on hours: 101035h, operating hours: 68322h, process hours: 34697h. Including an automated CO2 fire detection system, transformer, machine extraction system, 4× workpiece carriers and an automatic diameter detection system. Documentation available. An on-site inspection is possible. Dwedpfxszlt Sbs Aizsd

Condition: excellent (used), Mori Seiki ZT 1500 YB lathe, year: 2006, including 5 driven tools Dsdpfx Aieyyl Itozswd

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, overall weight: 6,500 kg, CNC MSX 501 MAPPS II Opposed-spindle machine. Spindle size A2-6, twin spindles. 2 stacked turrets. 9-axis controlled turning and milling center. 2 turrets. Y-axis upper turret. 2 C-axes. Bar capacity: 65 mm. T wo integrated 15 kW motors. Tool life management and tool wear monitoring. Mapps 4 conversational automatic programming system. Automatic force control and tool wear monitoring. Oil cooler for both spindles. 340 Nm cutting torque. 15-position turret, all positions motorized. Automatic workpiece collector. Bar loader LNS SPRINT S3 Interface for bar loader installation. Rear automatic part pick-up with a special gripper for long parts. Max. turning diameter: 320 mm. Turning length: 810 mm. Max. distance between main spindle and counter spindle: 920 mm. Main spindle speed: 5000 rpm. Counter spindle speed: 5000 rpm. X1 travel: 210 mm. Y1 travel: +50 / -50 mm. X2 travel: 210 mm. Counter-spindle travel: 920 mm. Number of powered tool stations: 2 x 15. Capable of holding 30 tools per turret. Large selection of external and internal tool holders. Large selection of axial and radial motorized blocks. Speed range of powered tools: 5.000 rpm. Dwedpfe Ahkb Dox Aizod Drive motor for powered tools: 5.5 kW. Rapid traverse X1, X2: 25.000 mm/min. Rapid traverse Y1: 20.000 mm/min. Rapid traverse Z1, Z2: 30.000 mm/min. C-axis resolution: 0.001°. Collet chuck on main spindle. Self centering chuck on counter spindle External and internal tool holders. Motorized axial and radial blocks. Communication ports via USB, PCMCIA card, and RS-232. Rear chip conveyor. Power transformer, documentation, parts list, electrical schematics, programming, and operating manual. Machine in very good condition. Machine weight 6.5 tons. Machine available for inspection while in operation.

Condition: used, Year of construction: 2011, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS IV greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface Dwsdpezk U Rpsfx Aizod CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. The robot cell has been diemanteled, it is now a stand alone machine. A bar feeder can be added. *

Condition: excellent (used), Mori Seiki ZT 1500 YB year: 2006 including 5 driven tools Dedpfx Aioyyfpkozowd

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, * Mori Seiki ZT 1500 YB. Dedpfe Ahnczox Aizewd * Opposed-spindle machine. * Spindle size A2-6, twin spindles. * 2 stacked turrets. * 9-axis controlled turning and milling center. * 2 turrets. * Y-axis upper turret. * 2 C-axes. * Bar capacity: 65 mm. * Two integrated 15 kW motors. * Tool life management and tool wear monitoring. * Two Renishaw automatic tool measurement arms. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitoring. * Oil cooler for both spindles. * 340 Nm cutting torque. * 15-position turret, all positions motorized. * Automatic workpiece collector. * 1.5-meter bar loader. * Interface for bar loader installation. * Rear automatic part pick-up with a special gripper for long parts. * Max. turning diameter: 320 mm. * Turning length: 810 mm. * Mori Seiki MSX-701 III control. * Max. distance between main spindle and counter spindle: 920 mm. * Main spindle speed: 5000 rpm. * Counter spindle speed: 5000 rpm. * X1 travel: 210 mm. * Y1 travel: +50 / -50 mm. * X2 travel: 210 mm. * Counter-spindle travel: 920 mm. * Number of powered tool stations: 2 x 15. * Capable of holding 30 tools per turret. * Large selection of external and internal tool holders. * Large selection of axial and radial motorized blocks. * Approximate value of equipment: 18,000 euros. * Speed range of powered tools: 5,000 rpm. * Drive motor for powered tools: 5.5 kW. * Rapid traverse X1, X2: 25,000 mm/min. * Rapid traverse Y1: 20,000 mm/min. * Rapid traverse Z1, Z2: 30,000 mm/min. * C-axis resolution: 0.001°. * High-precision Hainbuch collet chucks on both spindles. * External and internal tool holders. * Motorized axial and radial blocks. * Communication ports via USB, PCMCIA card, and RS-232. * Rear chip conveyor. * Power transformer, documentation, parts list, electrical schematics, programming, and operating manual. * Machine in very good condition. * Machine weight 6.5 tons. * Machine available for inspection while in operation.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, CNC controller: MSX-711 (MAPPS IV) Capacity Turning length mm: 1.540 Max. turning diameter mm: ø ø610 (Turret 2 ø274) Swing over bed mm: ø ø660 Swing over cross-slide mm: ø660 (Turret 2 ø300) Turn-mill spindle Full indexing specifications X-axis travel mm: 495 Y-axis travel mm: ±125 Z-axis travel mm: 1.560 B-axis degree: ±120° Speed ​​spindle rpm: 12.000 Drive power kW: 18,5/11 (10 min./cont) Tool magazine Magazine places: 76 Tool holder: Capto C6 Lower turret Number of tool slots St .: 10 Indexing time s: 0,19 Main spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Counter spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Equipment Spindle 2 with tailstock option Electronic Handwheel Interface High-pressure coolant system Chip conveyor Air blow for chuck and tool tip Dwedpfx Aijwztq Ejzed Auto tool presetter for upper and lower Bar feeder interface Hobbing function

Condition: like new (used), Year of construction: 1999, functionality: fully functional, MORI SEIKI SL-600B/2000 CNC LATHE Category: CNC Turning Centers Reference No.: 400212 Capacity: Ø900 X 2000 MM Year of Construction: 1999 Technical Specification: CNC Control : Fanuc 18iT WORKING CAPACITY Max Turning Diameter : 900 mm Dedpfx Aisx Nv Shozjwd Max Turning Length : 2000 mm Swing over bed : 994 mm Distance Between Centers : 2300 mm Swing over cross slide : 733 mm Travels (X) : 485 mm (440 + 45) mm Travels (Z) : 2150 mm TURRET Turret : 12 Station Square tool shank size : 32 mm Boring bar shank diameter : 65 mm TAILSTOCK Tailstock : MT5 Tailstock Quill Travel : 150 mm Tailstock Quill Dia : 150 mm SPINDLE Max Rotation Speed : 1500 RPM Main Spindle Nose : JIS A2-15 Main Spindle Bore : 185 mm Spindle Type : 3 Step Gearbox Spindle bearing inner diameter : 260 mm MACHINE DIMENSIONS Weight : 16T Additional Details: All Specifications are found online, and subject to verification by buyer.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) Dodpfxezr Hgxo Aizswd * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: used, Year of construction: 2008, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS III greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle Y-axis 2 x part counter total counter tool setting Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface Barfeeder Interface CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. Dedszd Su Espfx Aizewd *

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 34, spindle bore: 86 mm, overall weight: 16,000 kg, Turning and Milling Center acquired through business takeover Manufacturer: Mori Seiki / Model: MT 250S / 1500 / Year of Construction: 2000 / Refurbishment cost: 200,000 Euros Condition: good, Control: CNC Mori Seiki MSC 501 Technical Data: See attached PDF Max. turning diameter: 570 mm Turning length: 1530 mm Max. swivel diameter: 800 mm Swivel diameter over cross slide: 420 - 860 mm Distance between centers: 1,828 mm Main spindle: Speed range: 35 - 3500 min-1 Main spindle power: 18.5 kW / 15 kW Number of curve speeds: 2 Spindle nose: JIS A2-8 Max. bar capacity: 73 mm Spindle bore: 86 mm Spindle bearing diameter: 130 mm C-axis: 0.001° Tailstock: Tailstock spindle speeds: 50 - 3500 min-1 Tailstock power: 11 / 7.5 kW Number of curve speeds: 2 Spindle nose: JIS A2 - 6 Max. bar capacity: 60 mm Spindle bore: 73 mm Spindle bearing diameter: 110 mm C-axis: 0.001° Dsdpjzxg Suefx Aizowd Milling spindle: Spindle speeds: 8000 min-1 Power: 7.5 kW / 5.5 kW Tool taper: KM 63 Spindle bearing diameter: 80 mm B-axis: 120° / 105° Resolution: B 0.001° Number of tools: 42 Tool taper: KM 63 Max. tool diameter: 80 / 125 mm Max. tool length: 400 mm Max. tool weight: 8 kg Tool change time: 1.6 sec. X-axis: 635 mm / Y-axis: + / - 110 mm / Z-axis: 1595 mm / B-axis: 120° / 105° + Chuck: Rapid traverse (X/Y/Z): 24 / 24 / 30 m/min Max. feed rate: 30,000 mm/min / Total power: 72.3 kW / Weight: 22 tons / Dimensions: 7.0 x 3.5 x 3.5 m, Steady rest: 30 Tailstock: Not required 31 Tool magazine capacity: 42 32 Chip conveyor: Available 33 Chip conveyor type: Slatted belt 34 Chip container: Available 35 Cooling system: Standard (635 W / 1040 W) 36 Coolant supply through the tool spindle: Available 37 Compressed air cleaning of chuck (spindle 1): Available 38 Compressed air cleaning of chuck (spindle 2): Available 39 Tool presetter (in the machine, spindle 1): Automatic 40 Bar loader: Interface only 41 Measuring system X-axis: Heidenhain 42 Signal light: 3-stage signal tower (red, milky white, green) 43 Foot switch for chuck: Double foot switch 44 Steady rest: Automatically centering steady rest (programmable) 45 Type of automatically centering steady rest: SLU3 (SMW) 46 Steady rest unit (SMW): Available 47 Automatic door: Available 48 Hydraulic fluid (fluorocarbon): Not compatible 49 Number of total counters: 1 50 Number of workpiece counters: 1 51 Automatic shutdown: Available 52 Language of NC screen: Spanish 53 Language of PC screen: Spanish 54 Language of warning screen: Spanish 55 Memory capacity for part program (m): 1160 m 56 Number of stored programs: 125 57 Number of tool correction pairs: 240 58 Optional sentence masking: Softkey version 59 Programmable data input: Available 60 Number of shared variables for user macros: 600 61 Tool life monitoring: B 62 Number of tool life monitoring (MORI): MAX. 128 PAIRS * 4 63 LOAD MONITORING: B

Condition: ready for operation (used), Year of construction: 2009, operating hours: 28,050 h, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, number of axes: 5, This MORI SEIKI NL 1500 SY was manufactured in 2009. It features a control unit MSX-850III and has undergone recent servicing of guideways by DMG MORI. The machine includes a 3-jaw chuck for the main spindle and comes with all tooling and toolholders. If you are looking to get high-quality turning and milling capabilities, consider the MORI SEIKI NL 1500 SY turn-mill centre we have for sale. Contact us for further details. - Spindle Hours: 5,011 hOptional: - Driven Toolholders / Angle Heads: Sauter / WF (radial / axial) - Collet Chuck System (Main & Sub-Spindle): Hainbuch - Chuck (Main Spindle): 3-jaw chuck - Tooling / Toolholders Dodpfxs Afnbno Aizewd Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 615, overall weight: 8,700 kg, The Mori Seiki SL-303 BMC/1500 is a robust, high-precision 3-axis CNC slant-bed turning and milling center. The model designation indicates a system with powered tools (BMC), a C-axis, milling capability (MC), and an extended center distance of 1500 mm for machining long workpieces (e.g., shafts). Equipment: -Single spindle, three-jaw chuck, automatic tailstock SMW Autoblock, 12-position tool turret, automatic steady rest, chip conveyor Control: -MSG-501 (SL303-615) Key features & benefits: -Complete machining (multi-process): The use of powered tools and C-axis control allows milling, drilling, and threading operations to be performed directly after turning without re-clamping. -High rigidity: The massive cast iron slant bed effectively dampens vibrations, resulting in excellent surface finishes and a long tool life. -Thermal stability: Comprehensive cooling and oil circuits around the spindle minimize thermal expansion during long and heavy roughing operations. Dwjdpfx Aioz N Dkbozod Accessories: -Work bench with partition (1 door, 3 drawers) Contents: hand tools -Telescopic drawer cabinet (7 drawers), side shelf Contents: various turning tools and tool holders Attractive offer – flexible and worry-free We offer not only a high-quality product, but also tailored financing options that adapt to your needs. Whether it’s a down payment, installment payments, or individual financing models – together we will find the right solution. If desired, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about anything. 📞 Please contact us for more information or a non-binding offer. We will provide you with personal and expert advice. Subject to prior sale, changes and errors!

Condition: ready for operation (used), Year of construction: 2012, operating hours: 10,000 h, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 800 mm, spindle motor power: 26,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 370 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 1,050 mm, rotational speed (max.): 4,000 rpm, feed length X-axis: 25,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 30,000 mm, total height: 2,574 mm, total length: 3,930 mm, total width: 2,280 mm, spindle nose: A2-8, overall weight: 9,100 kg, Equipment: documentation/manual, The Mori Seiki NZX 2500/1000Y is an extremely robust and versatile CNC turning machine, designed for companies that demand high levels of productivity, accuracy, and flexibility. Djdpez R T Exsfx Aizswd The machine is equipped with a Y-axis, which, in addition to conventional turning operations, enables complex milling and drilling operations. In combination with powered tools, this offers extensive possibilities for completely machining workpieces in a single setup. The two turrets provide a large tool capacity and enable simultaneous operations. This makes the NZX 2500/1000Y particularly suitable for complex workpieces and series production. Additional options & accessories: - Double turret configuration (Turret 1 and Turret 2) - Y-axis - Powered tools - Interface for bar feeding - SMW Autoblok (SLU-X-2_ZS) hydraulic chuck - Renishaw measuring arm for tool measurement on Turret 1 and Turret 2 - High-pressure pump - HAINBUCH SPANNTOP nova Kombi Axfix Gr. 65 chuck - Various tool holders (powered and static) - All original Mori Seiki documentation Weight & dimensions: 9100 kg approx. 3930x2280x2574 mm (LxWxH)

Condition: used, Year of construction: 2011, functionality: fully functional, turning length: 810 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, spindle bore: 73 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, bar diameter (max.): 65 mm, We offer this used Mori Seiki NZ2000 CNC turning and milling center, manufactured in 2011. Fully automated twin-spindle production cell with FANUC robot, PROMOT Automation, and TOP XF380 bar feeder. Year of manufacture: 2011 For sale is a MORI SEIKI NZ2000 T2 CNC turning machine as a complete, automated production cell with PROMOT Automation, FANUC industrial robot, and TOP Automazioni XF380 bar feeder. This system is particularly notable for its exceptional automation concept, of which there are only two in Europe. The combination of main spindle, counter-spindle, two turrets, bar feeder, and robot automation allows different machining and material flow processes to be automated within a single system. The main spindle is supplied with bar material via the TOP Automazioni XF380 bar feeder. The bar capacity of the machine is 65 mm. Finished parts can be ejected on this side via the existing parts ejector. Simultaneously, the FANUC industrial robot with PROMOT Automation handles the automated workpiece handling on the counter-spindle side. The workpieces are placed on or removed from a rotary table with multiple workpiece holders. This enables highly productive simultaneous machining on the main and counter-spindle. The system thus combines practically two automated machining processes within a single production cell. Equipment / Highlights  MORI SEIKI NZ2000 T2  Year of manufacture 2011  Main and counter-spindle  2 turrets  Simultaneous machining capabilities  Driven tools  TOP Automazioni XF380 bar feeder, year of manufacture 2011  Bar capacity MORI SEIKI NZ2000 T2: 65 mm  Automatic material feed via bar material  Parts ejector on the main spindle side  PROMOT Automation robot cell, year of manufacture 2011  FANUC industrial robot  Automatic loading and unloading on the counter-spindle side  Rotary table / workpiece storage with multiple workpiece holders  Integrated safety device and protective enclosure  Fully integrated and coordinated production cell Technical data  Max. turning diameter: approx. 320 mm  Max. turning length: approx. 810 mm  Bar capacity MORI SEIKI NZ2000 T2: 65 mm  Spindle bore: approx. 73 mm  Max. spindle speed main and counter-spindle: up to 5,000 rpm  2 tool turrets  Driven tools  C-axis on main and counter-spindle  Design without Y-axis  Simultaneous machining on main and counter-spindle Djdpfxjz A S Uys Aizowd  TOP Automazioni XF380 bar feeder, year of manufacture 03/2011  Bar capacity of the entire system: up to 65 mm round material, limited by the particularity of the system. In contrast to a conventional NZ2000 T2, this is not simply a CNC turning machine with a robot added later. The system was designed as a complete, automated manufacturing cell. Bar machining and robot handling can be combined within the same machine. While one side performs machining of bar material via the main spindle, the counter-spindle side can be automatically loaded and unloaded via the FANUC robot. This concept enables high machine utilization and is particularly suitable for series production and low-manned or automated production operations. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2011, turning diameter max. 320 mm turning length max. 810 mm control MSX-701 IV greates pass round over bed 800 mm Swing dia. over traverse guideway 800 mm distance between spindles 1.130 mm Number of revolutions max. 5.000 rpm power capacity - main spindel 25 / 22 kW max. Torque 358 Nm Dwsdpfev E R E Nsx Aized spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm Number of revolutions max. 5.000 rpm power capacity - Sub spindle 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm Traverses Subspindle B: 870 mm rapid traverse ( X / Y / Z ) 1: 30 / 20 / 50 m/min rapid traverse ( X / Y / Z ) 2: 30 / - / 50 m/min Tipp feed 0 - 5.000 mm/min total power requirement 94 kVA weight of the machine ca. 8,3 t dimensions of the machine ca. 10,0 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 2000 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions

Condition: used, Year of construction: 2013, Mori Seiki NLX2500-700SY CNC Lathe with C&Y Axis, Barfeed Unit. (2013), Swing Over Cross-slide 360mm, Maximum Cutting Diameter 366mm, Maximum Cutting Length 705mm, Bar Capacity 80mm, Spindle Speed 4,000rpm, Milling Speed 10,000rpm, Main Spindle Power 18.5Kw, C Axis 0.001 degrees, Y axis -/+ 50mm, 12 Station Turret, Mori Control M730BM, equipped with Toolsetter, Swarf Conveyor, 3 Jaw Chuck, Parts Catcher. S/No. NL254130462. Country of Origin: Japan Dedpfxj Ah E Aae Aizowd Location: This lot is located in Leicester, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, TECHNICAL DETAILS - Number of axes : 6 - Number of turrets : 2 MAIN SPINDLE - Spindle nose : A2-8" - Spindle speeds : 4.000 [rpm] - Spindle power : 22 [kW] - Max. bar diameter : 80 [mm] - Max. diameter on bench : 780 [mm] - Max. turning diameter, turret 1 : 370 [mm] - Max. turning diameter, turret 2 : 260 [mm] - C axis indexing precision : 0,001 [°] TURRET 1 - Number of positions : 12 - Number of motorized positions : 12 - Live tools speed : 6.000 [rpm] - Live tools power : 3.7 [kW] - X/Z stroke : 225 / 1050 [mm] Dwjdpfsziqgdox Aizsd - Y stroke : [mm] - Rapid traverses rates (X/Y/Z) : 25 / 15 / 30 [mm/min] TURRET 2 - Number of positions : 8 - X/Z stroke : 170 / 1050 [mm] - Rapid traverses rates (X/Z) : 25 / 30 [mm/min] TAILSTOCK - Tailstock type : Numérique - Distance between centers : 1030 [mm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 54 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 4.400 x 2.800 [mm] - Machine height : 2.570 [mm] - Machine weight : 9.100 [kg] MACHINE HOURS - Number of working hours : 22.857 [h] EQUIPMENT - CNC : Mori MSX-853IV - 3 colors status lamp - Coolant tank * with high-pressure pump - Rest : SMW AUTOBLOK SLU 2 : 12-101 [mm] - Chips conveyor : DROITE - Tool probe - Electric transformer

Condition: excellent (used), Year of construction: 2006, x-travel 750 mm y-travel 210 mm z-travel 1150 + 100 mm control Fanuc MSX-701III Maximum turning diameter 660 mm Max. turning length 1498 mm Dwodpfx Aioy Spuuezjd Diameter over cross slide max. 400 mm number of spindle speeds 3000 U/min tool piece magazine with 40 Plätzen turret 10 Fach total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm

Condition: not inspected (used), Year of construction: 2003, Vertical CNC milling machine MORI SEIKI NV500A/50 (2003) at auction. MSG-501 control, X-axis travel 800 mm, table 1,100 x 600 mm, 30-tool magazine, spindle up to 8,000 rpm, machine weight approx. 6,700 kg. Used CNC mill Dodpfx Aisz I Ebqjzswd

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, turning length: 920 mm, turning diameter: 400 mm, spindle speed (max.): 12,000 rpm, spindle bore: 65 mm, travel distance X-axis: 920 mm, rapid traverse Z-axis: 80 m/min, controller manufacturer: FANUC, controller model: 18iB, fuel: electricity, number of slots in tool magazine: 40, Equipment: chip conveyor, Mori Seiki Mod. MT 1500 SX 9-axis milling and turning machining center, manufactured in 2006, with Fanuc Series 18iB (MSX-501) control, maximum length between chucks of 920mm, maximum diameter of 400mm, bore of 65mm, spindle speeds of 4000 and 6000 rpm for chucks and 12,000 rpm for milling. 12-position turret with motorized tools, Y-axis, B-axis +/- 120, C-axis 0.001, ATC 40 tools and chip extractor. In excellent working order and can be seen working in Portugal. Dedpsh Elp Ejfx Aizowd

Condition: excellent (used), Year of construction: 2006, operating hours: 7,562 h, turning length: 515 mm, turning diameter: 366 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, rotational speed (max.): 6,000 rpm, total height: 2,120 mm, total length: 2,705 mm, total width: 2,000 mm, overall weight: 5,500 kg, CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 590 B-axis travel mm: 624 Turning length mm: 515 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 923.8 Swing over cross-slide mm: 755 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 16 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5/5.5/3.7 (3min/5min/cont) Indexing time s: 0.25 Main spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 61 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 43 Dwedpfsu T H Dxjx Aizsd Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Coolant system Tank capacity liter: 235 Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Interface for Bar feeder Bar loader IEMCA MASTER 880/MP 33 LL Working time hours Potencial nominal kVA: 27.4 Basic machine dimensions / weight Length mm: 2.705 Width mm: 2.000 Height mm: 2.120 Weight kg: 5.500