Used Mori Seiki Nzx 1500 for sale (207)

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, total height: 2,610 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, overall weight: 9,600 kg, spindle speed (max.): 14,000 rpm, number of axes: 4, This 4-axis MORI SEIKI NH 4000 DCG was manufactured in 2006 and features a horizontal machining centre with only 1,300 hours on the main spindle, which was overhauled in April 2022. If you are looking to get high-quality milling capabilities, consider the MORI SEIKI NH 4000 DCG machine we have for sale. Contact us for more information. Extra Information Machine under power: Yes Main spindle overhauling date: April 2022 Tool Shanks: MAS-BT40, CAT-40 Tool Selection Method: Fixed Address, Shorter Route Access Number of Pallets: 2 (3 optional) Pallet Change Time: 6 sec Dusdox D D U Rjpfx Ag Top Hydraulic Oil Tank: 20 L Lubricant Tank: 2.0 L (spindle), 10 L (oil temperature controller) Coolant Tank: 515 L Power Requirement: 35.2–41.3 kVA Compressed Air Supply: 0.5 MPa, 420 L/min Dimensions Machine Depth 2300 mm

Condition: ready for operation (used), Year of construction: 2012, operating hours: 6,500 h, number of axes: 3, This 3-axis DMG Mori Seiki NLX2500Y 700 was manufactured in 2012. It features a KITAGAWA Hollow Clamping Device, enhanced coolant system at 5 bar, and an integrated parts catcher. Additional attributes include a hinged belt conveyor, I/F for bar feed, and a signal light system. Ideal for turn-mill operations, consider the opportunity to buy this DMG Mori Seiki NLX2500Y 700 horizontal turning machine. Contact us for more information about this machine. Additional equipment • KITAGAWA Hollow Clamping Device with KITAGAWA SS1881K21 for the main spindle • Coolant system with increased pressure (5 bar) • Hinged belt conveyor, right-hand discharge • Integrated parts catcher for the main spindle • Interface for bar feed, LNS • Double foot switch with protective cover • Signal light (red, yellow, green) Dusdpfsx D D Uwjx Ag Tep • Tool overhang length 100 mm for driven Y-axis travel + Tool holder package • Transformer 45000 VA • 15 bar pump with filter Extra Information The machine has only approximately 6,500 operating hours and is in top condition Included in the price of the machine: 12 driven toolholders, including quick-change systems, and 17 static toolholders. Value new: over €30,000

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 4,000 rpm, spindle motor power: 18,000 W, overall weight: 5,800 kg, controller manufacturer: FANUC, number of axes: 5, This 5-axis MORI SEIKI NL 2500 SY was manufactured in 2007, featuring a sub-spindle and a 12-station motorized turret. It includes main and sub-chucks of 250 mm and 210 mm, respectively, and a bar capacity of 80 mm. The machine offers a spindle speed of 4,000 rpm and a tool speed of 6,000 rpm. Consider the opportunity to buy this MORI SEIKI NL 2500 SY horizontal machine centre. Contact us for more information about this machine. Additional equipment • Renishaw tool measurement arms (2) • Communication: USB, PCMCIA, RS-232 • Bar feeder interface • Automatic parts catcher • Independent chuck pedals • Chip extractor: hinged lateral Djdpoyaiqkefx Ag Tsup Machine Benefits Technical Machine Benefits • Sub-spindle motor: 15 kw • Tool motor: 5. 5 kw (torque 640 nm) • Tool speed: 6000 rpm • Turret index: 0. 2 sec • 12-station motorized turret • Oil cooler: daikin • C-axis: both spindles Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2005, total height: 3,080 mm, table width: 3,275 mm, overall weight: 7,600 kg, product length (max.): 2,000 mm, This 5-axis MORI SEIKI ZV 400 SUPER MILLER was manufactured in 2005. It features an X-axis travel of 600 mm, Y-axis travel of 425 mm, and Z-axis travel of 450 mm. The machine includes a table diameter of Ø 350 mm and a maximum workpiece weight of 200 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI ZV 400 SUPER MILLER vertical machining centre we have for sale. Contact us for further details. • Axis Travels: Duodpfx Agoynhy Hs Tep • X Axis: 600 mm • Y Axis: 425 mm + CUA stroke 75 mm • Z Axis: 450 mm • A Axis Rotation: 360° • B Axis Rotation: −20° / +110° • Distance between table and spindle nose: 65 – 515 mm • Table Diameter: Ø 350 mm • Maximum Workpiece Weight: 200 kg • Table Turning Speed: 30 – 1500 rpm • Tool Magazine Capacity: 50 tools • Maximum Tool Diameter (with adjacent tools): Ø 90 mm • Maximum Tool Diameter (without adjacent tools): Ø 125 mm • Maximum Tool Length: 300 mm • Maximum Tool Weight: 8 kg • Rapid Traverse X–Y–Z: 45000 mm/min

Condition: ready for operation (used), Year of construction: 2006, This 3-axis MORI SEIKI NL2500MC/700 was manufactured in 2006. It features a maximum machining diameter of 366 mm and a turning length of 705 mm. The machine is equipped with a turret that has 12 positions and a spindle speed of up to 4000 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL2500MC/700 horizontal turning machine we have for sale. Contact us for further details. • Maximum Machining Diameter: 366 mm Dsdpfx Ageym T Dnj Toup • Maximum Turning Length: 705 mm • X/Z Travel: 260/795 mm • Number of Positions: 12 • Features: Turret with milling function 6000 rpm (5.5/3.7 kW) • Programmable Tailstock: MT5 • Tool Presetter • Tool Holders • High-pressure Coolant • Kitagawa 10'' Hollow Chuck • Workpiece Unloader • Chip Conveyor • Coolant 20 Bar

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 800 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, total height: 2,770 mm, table width: 2,576 mm, overall weight: 6,300 kg, product length (max.): 2,583 mm, number of axes: 3, This 3-axis MORI SEIKI MV 40 was manufactured in 1999. It features an X-axis travel of 800 mm, Y-axis travel of 410 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1,100 x 450 mm and a maximum table load of 700 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI MV 40 vertical machining centre we have for sale. Contact us for further details. • Distance between table and spindle nose: 755 mm • Table dimensions: 1100 × 450 mm • Maximum table load: 700 kg • Tool holder: BT 40 • Tool magazine capacity: 30 positions • Maximum tool diameter (with adjacent tools): Ø 80 mm • Maximum tool diameter (without adjacent tools): Ø 125 mm Dodeynh Dxepfx Ag Tjup • Maximum tool length: 250 mm • Maximum tool weight: 8 kg • Rapid traverse X–Y: 20000 mm/min • Rapid traverse Z: 15000 mm/min •

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table load: 350 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis MORI SEIKI NV4000 was manufactured in 2003. It features a CNC control system, typically FANUC/MAPPS, and a vertical machining center design. Key specifications include a 600 mm x 400 mm x 400 mm axis travel, a table size of 700 mm x 450 mm, and a maximum spindle speed of 12,000 rpm. The tool magazine holds up to 40 tools. Consider the opportunity to buy this MORI SEIKI NV4000 vertical machining center. Contact us for more information. • Table size: 700 × 450 mm • Max workpiece size (L × W × H): approx. 750 × 450 × 400 mm • Tool holder type: BT40 (Big Plus option common) Dsdjx Imudepfx Ag Tjup • Tool magazine capacity: typically 40 tools • Rapid traverse (X/Y/Z): 42 m/min • Machine technology: DCG – Driven at the Center of Gravity design to reduce vibration and increase accuracy and surface quality Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3s MORI SEIKI SV-50s was manufactured in 1997. The CNC milling machine is in good working condition and has been used only a few times for prototype work. It features a FANUC spindle with a speed of 10,000 rpm and a tool changer with 30 positions. Consider the opportunity to buy this MORI SEIKI SV-50 vertical machining centre. Contact us for further details. • Condition: Used, in good working condition; reportedly used only a few times for prototype work • Spindle: FANUC (as provided) Duedpfxsyk Awfs Ag Tsp • Tool changer: 30 positions • Table dimensions: approx. 270 x 250 x 230 mm (to be reconfirmed) Additional equipment • Chip conveyor (based on visual confirmation only) • Tool cabinet / cabinet with tooling • Machine vice (based on visual confirmation only) • Approx. 15 tool holders with collet chucks (based on visual confirmation only) • Elastic collets • Approx. 20 milling cutters, various sizes (based on visual confirmation only) • Dial indicator (noted twice; included once)

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, total height: 2,850 mm, overall weight: 6,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 22,000 W, tool weight: 20,000 g, number of axes: 3, This 3-axis MORI SEIKI SV-500/40 was manufactured in 1998. It features a spindle speed of 10,000 rpm and a tool magazine capacity of 30 tools. The machine has an impressive X-axis travel of 800 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI SV-500/40 vertical machining centre we have for sale. Contact us for further details. • Spindle-to-table distance: 150–660 mm • Feed rates: • Rapid traverse (X/Y/Z): 32 m/min • Cutting feed: 16 m/min • Spindle: • Max torque: 235.6 / 191 Nm • Tool changer: • Capacity: 30 tools • Tool interface: BT 40 (ISO 40) • Max tool diameter: 120 mm (adjacent) / 240 mm (without adjacent) • Max tool length: 350 mm • Tool change time: 2 s • Dimensions & weight: • Installation area: 2,610 × 3,500 mm Additional equipment • 2-position automatic lateral pallet changer • Working surface: 2 × 1,100 × 600 mm • Max pallet load: 1,000 kg Dsdpfjyq E Imsx Ag Tsup • Through-spindle coolant system with paper filter tank • Chip conveyor

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of axes: 4, This 4s MORI SEIKI NHX 5000 was manufactured in 2011. It features a dual pallet system with a pallet size of 500 × 500 mm and a maximum pallet load of approximately 500 kg. The spindle speed reaches up to 12,000 rpm, with a tool magazine capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NHX 5000 horizontal machining center we have for sale. Contact us for further details. • Pallet system: Dual pallet; size 500 × 500 mm; max load ≈ 500 kg • Tool system: Magazine 40 tools (optional 60 / 120); tool-to-tool ≈ 0.9 s; chip-to-chip ≈ 2.8 s • B-axis: Continuous 360°; indexing resolution 0.001° Duedpfxjyh Hzye Ag Tjp • Rapid traverse (X/Y/Z): ≈ 60 m/min • Accuracy/Construction: High-precision linear guides; thermal displacement control system; glass scales (depending on configuration) Technical Specification Taper Size BT 40

Condition: good (used), Year of construction: 2014, functionality: fully functional, Technical details turning diameter - mm turning length - mm control M 730 BM Additional information CNC control: M 730 BM Center distance: 500 mm Main spindle: Speed: 5000 rpm Power: 15/11 kW (15% duty cycle / constant) Bar diameter: 65 mm Sub spindle: Speed: 6000 rpm Dodpsyml Dmsfx Ag Toup Power: 11/7.5 kW (25% duty cycle / constant) Turret: 12 stations Tool spindle speed: 10000 rpm Power: 5.5/3.7 kW (5 minutes / constant) Y-axis travel: +/- 50 mm Equipment: Machine with gantry loader: Left-hand installation, 14-station storage, 20-pallet workpiece storage, Double gripper conveyor 3-jaw hydraulic KITAGAWA power chuck, 210 mm diameter High/low pressure chuck system for main and counter spindles MABEO high-pressure pump with 1.5 MPa filter unit Coolant gun Coolant sprayer on the chuck for main and counter spindles Coolant sprayer for the machine bed cladding Oil mist separator Hinged belt chip conveyor Renishaw workpiece measuring system with optical signal transmission, counter spindle Cooling of the ball screw in the X-axis

Condition: used, turning diameter 340 mm turning length 530 mm control Fanuc swing diameter 520 mm Distance between centers 625 mm Duedpfx Ageynbize Tjp spindle tunring speed 3.500 U/min spindle bore 78 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 1998, Horizontal machining center MH-400 with 10-station pallet pool; Flat guideways; Pallet size: 400 x 400 mm; Additional 10 exchange pallets; Pallet can be indexed in 1° increments; Internal coolant supply with Knoll system; 120 tool stations; 10,000 rpm; Chip conveyor; Fanuc control; Machine can be inspected under power by appointment; Price includes machine disassembly! Loading and transport are not included in the price; Dujdeyrryrspfx Ag Top

Condition: good (used), Year of construction: 2006, Year of manufacture: 2006 CNC control: Mitsubishi MSX-850 X-axis travel (mm): 260 Z-axis travel (mm): 795 Y-axis travel (mm): 100 Swing diameter over bed (mm): ø 920 Swing diameter over cross slide (mm): 742 Upper turret Number of tool stations: 12 Main spindle Max. spindle speed (rpm): 4,000 Spindle drive power (kW): 18.5/15 Spindle bore (mm): 91 Chuck type: Hollow Chuck (10") Manufacturer: KITAGAWA Tailstock Tailstock travel (mm): 734 Taper: MT3 Equipment Chip conveyor Signal light High-pressure pump Foot switch for chuck or collet system Interface for bar feeder Dujdpov Egqzsfx Ag Tsp Basic machine: Dimensions/Weight Length (mm): 2,620 Width (mm): 1,898 Height (mm): 2,200 Weight (kg): 6,140

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,350 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: Mori Seiki (Fanuc), controller model: MSX-701 (Fanuc 31i), workpiece height (max.): 1,450 mm, workpiece diameter (max.): 1,450 mm, workpiece weight (max.): 2,200 kg, total height: 3,850 mm, total length: 7,200 mm, total width: 4,300 mm, spindle speed (max.): 8,000 rpm, coolant supply: 70 bar, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Offered here is a machining center from the manufacturer Mori Seiki. The machine is fully functional, in good condition, and can be inspected and tested at our facility. Manufacturer: Mori Seiki Model: NH8000 DCG Year of manufacture: 2008 Control: MSX 701-III Technical data: Travel (X-Y-Z): 1400 x 1200 x 1350 mm B-axis: 0.001° Feed rate X, Y, Z: 50,000 mm/min Rapid traverse X, Y, Z: 50 m/min Pallet size: 800 x 800 mm Number of pallets: 2 Pallet change time: 16 s Max. workpiece weight: 2,200 kg Max. workpiece diameter: 1,450 mm Max. workpiece height: 1,450 mm Spindle speed: 8,000 rpm Spindle power: 37 kW Tool holder: HSK-A100 Tool magazine: 60 positions Tool change time: 1.9 s Distance between pallet surface and spindle center: 100–1,300 mm Distance between pallet center and spindle nose: 100–1,450 mm Total connected load: 86 kVA Duedpfoyrdn Usx Ag Top Machine dimensions: approx. 7,200 x 4,300 x 3,850 mm Machine transport dimensions: approx. 7,000 x 3,400 x 3,300 mm Machine weight: approx. 30 t Total weight incl. magazine and accessories: approx. 37 t Scope of delivery: 1x Mori Seiki NH8000 DCG machine 1x matrix tool magazine 1x chip conveyor 1x coolant system 1x transformer various tool holders

Condition: used, Year of construction: 1999, turning diameter max. 900 mm turning length max. 2.000 mm control MSD 501 II turning diameter over bed 994 mm turning diameter over cross slideways 733 mm standard turning dia. 374 mm centre distance 2.300 mm turning speed range - main spindle 3 - 1.500 min/-1 power capacity - main spindel 43 / 37 kW Number of speed ranges 3 spindle bore 205 mm chucking diameter 500 + 500 mm number of toolpositions 12 pos. Shank height for square tool 32 mm Drill shank diameter max. 65 mm x-axis 485 (450 + 35) mm z-axis 2.150 mm tailstock 2.100 mm diameter of quill 150 mm quill stroke 150 mm Djdpfx Agsylzv Nj Tsup rapid traverse X: 20 / Z: 20 m/min Tipp feed 0 - 1.260 mm/min total power requirement 65 kVA weight of the machine ca. 18,5 t dimensions of the machine ca. 8,0 x 4,0 x 3,2 m CNC - Oil pipe Lathe MORI SEIKI - SL 600 B / 2000 CNC lathe with front and rear chucks and high drive power for pipe machining Features: - Pneumatic front chuck 500 mm with 205 mm bore - Pneumatic rear chuck 500 mm with 205 mm bore Control Options: - Variable thread pitch - Program memory expansion - Tool correction expansion

Condition: used, Year of construction: 2017, Technical details: x-travel: 560 mm y-travel: 560 mm z-travel: 660 mm control: Celos Siemens 840D SL Operate ERGOline Multitouch turning speeds: 20 - 20.000 1/min spindle drive: 25/ 35 kW max. torque on the spindle: 86 / 130 tool taper: HSK-A63 Number of tool station: 60 diameter of tools max.: 70 mm Tool diameter with no neighbouring tools: 170 mm tool length - max.: 450 mm weight of tools max.: 12 kg numbers of pallets: 2 Pallet dimension: 400 x 400 mm max. workpiece diameter: 630 mm workpiece height max.: 900 mm table load: 400 kg rapid travel x/y/z: 60 m/min Feed x/y/z: 60 m/min internal coolant system feed: 70 bar weight of the machine ca.: 8,5 t dimensions: 3200 x 4800 x 2900 mm Accerories Rotoclear window Signal lamp 4 colours Electronic handwheel Probe for tool breakage and length measuring Coolant shower Dodpfeyqybbox Ag Tjup Renishaw probe (spindle) Vorbereitung / preparation only HSK cone cleaning station with brushes Horizontal machining center with Siemens - Celos control, full b-axis, tool magazine with 123 pos. HSK-A 63, coolant through spindle 40 bar. The machine has just received a new milling spindle. *

Condition: used, Year of construction: 2010, turning diameter 370 mm turning length 424 mm control Fanuc Dodpsxzk Rtefx Ag Tsup

Condition: like new (used), Year of construction: 2017, operating hours: 3,493 h, turning diameter over cross slide: 742 mm, turning length: 705 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, spindle motor power: 15,800 W, total height: 2,200 mm, total length: 3,350 mm, total width: 2,110 mm, swing diameter over cross slide: 742 mm, workpiece weight (max.): 500 kg, overall weight: 5,820 kg, bar passage: 80 mm, Year of construction: 2017 CNC controller: Mitsubishi M730UM mit CELOS Capacity Y-axis travel mm:±50 Turning length mm: 705 Max. turning diameter mm: ø 356 Swing over bed mm: ø 920 Swing over cross-slide mm: 742 Bar work capacity mm: 80 Upper turret X-axis travel mm: 260 Z-axis travel mm: 795 Number of tool slots St .: 12 Speed ​​driven tools RPM: 10000 Main spindle Speed ​​spindle rpm: 4000 Drive power spindle kW: 15.8/15 Spindle bore mm: 111 Chuck type: 10" Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Counter spindle Speed ​​spindle rpm: 6000 Drive power spindle kW: 11/7.5 Spindle bore mm: 73 Chuck type: 6" Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Counter spindle travel mm: 734 Djdpfx Aoykt Dcsg Teup Equipment Chip conveyor Rotating inspection windows Signal lamp Workarea light Air or water through spindle center RENISHAW Measuring probe Working time hours Under power: 3493 Spindle 1: 1700 Rated power kVA: 45 Basic machine dimensions / weight Length mm: 3350 Width mm: 2110 Height mm: 2200 Weight kg: 5820

Condition: used, Year of construction: 1990, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Lathe Mori Seiki Type SL-3H CNC Fanuc Dujdpeykkzxjfx Ag Tsp Complete Without conveyor Without jaw chuck

Condition: used, Year of construction: 1995, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Mori Seiki Lathe 3 Axes X, Z, C Model SL-45 MC Year 1995 Fanuc CNC Without jaw chuck With tooling With chip conveyor With documentation Duedpfx Ajykkzfjg Tep Complete

Condition: excellent (used), functionality: fully functional, Driven Tools Machine: MORI SEIKI SL2000 Turret Manufacturer: SAUTER Dujdjynb E Nopfx Ag Tjp ---- 2x→ No. 444-119 Turning Tool Holder 25 mm steel holder Fixed turning tool holder Price: on request 1x→ No. 444-201 Double Turning Tool Holder For main spindle and sub spindle With 1 clamping bar for 25 mm tool steels Fixed turning tool holder Price: on request 1x→ No. 444-210 Boring Bar Holder Cylindrical mount ø 32 mm second mount ø 32 mm; 57 mm to the rear Price: on request 1x→ No. 444-205 Turning Holder Mount 25 mm steel holder Price: on request

Condition: good (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, CNC control MSC 803 25-fold automatic tool changer coolant device Djdpfswhkcxsx Ag Toup Technische Daten / technical details: Verfahrweg X / X-Travel 510 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 510 mm Tischgröße / table size 750x550 mm Drehzahlbereich / spindle speed 8000 UpM /rpm Anzahl der Werkzeugplätze / tool places in changer 25 fach Spindelaufnahme / spindle taper BT40 Gewicht der Maschine ca. / weight 4500 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1988, ohne Gewähr weight of the machine ca. 4 t Dsdpfx Aoyiu Tpsg Toup

Condition: used, Year of construction: 2008, turning diameter: 275 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,345 mm, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, Equipment: documentation/manual, CNC Lathe with Y-axis, driven tools an 2nd spindle CNC Control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 / 366 mm Dusdpfx Asygw Hmeg Tsp Spindle bore diameter 80 mm Spindle speed 4000 R/min Spindle motor 18.5/15 Kw Movement X-axis 260 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1345 mm Movement W-axis (subspindle to mainspindle) 1275 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper BMT Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 6000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.