Used Mori Seiki Sh 400 for sale (189)

Condition: like new (used), Year of construction: 1985, Parts shown by hand not come. Dksdpfx Aljgw Shrj Seu 4 axis not come with machine.

Condition: used, Mori Seiki MV45/45 machining center with Fanuc 11M control, travels X 820 / Y 555 / Z 550 mm, 4,500 rpm spindle (7.5 / 5.5 kW, BT 45) and Kitagawa 4th axis for simultaneous 4-axis machining. Professional through-spindle coolant retrofit by Deuschle Spindelservice — rotary union through the pull stud, hydraulic tool clamping with pressure intensifier, dedicated 15 bar pump switched via M50 — plus box guideways for exceptional rigidity, 2 mechanical gear stages delivering 200 Nm torque in low gear, and approximately 75 BT 45 tool holders (all with through-coolant passage) included. Box-guideway construction and 4-axis simultaneous capability make this a stable, versatile workhorse for complex parts. CNC CONTROL Controller: Fanuc 11M Djdpfx Alozy Svuj Sjku AXES Number of controlled axes: 4 Number of simultaneous axes: 4 X-axis travel mm: 820 Y-axis travel mm: 555 Z-axis travel mm: 550 4th axis / rotary table: Kitagawa SPINDLE Max. spindle speed rpm: 4.500 Spindle power kW (S1/S6): 7,5 / 5,5 Spindle torque Nm: 200 Spindle taper / interface: BT 45 Gearbox stages / speed ranges rpm: 2 COOLING Coolant through spindle bar: 15 EQUIPMENT & OPTIONS • Box guideways (flat slideways) — very rigid, stable machine • 4-axis simultaneous: Kitagawa 4th-axis rotary unit, hydraulically clamped, fully integrated in the control • Spindle with 2 mechanical gear stages — high torque, 200 Nm in low gear • Through-spindle coolant (IKZ) retrofitted by Deuschle: rotary union through the pull stud, hydraulic clamping/release with pressure intensifier, own 15 bar pump switched via M50 • Chip conveyor at the front, discharging to the right • Approx. 75 BT 45 tool holders included, all with through-coolant passage, plus about 20 pull studs • 4th axis (rotary table)

Condition: used, Year of construction: 2007, turning diameter max. 356 mm turning length 705 mm control MSX 850 III MAPPS Mitsubishi greates pass round over bed 923,8 mm Swing dia. over traverse guideway 755 mm standard turning dia. 275 mm max. spindle speed 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bearing diameter 140 mm spindle bore 91 mm max. bar capacity 80 mm chucking diameter 305 mm C-Axis 0,001 ° Dsdpfxezb N Uxe Al Ssku Spindle speed range subspindle max. 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle nose JIS A2-5 spindle bearing diameter 85 mm spindle bore 43 mm chucking diameter 210 mm C-Axis 0,001 ° number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Shank diameter 26 mm Drill shank diameter 50 mm Spindle speed - driven tool stations max. 6.000 min -1 turret change time 0,25 sec. x-axis 260 mm z-axis 795 mm b-axis 734 mm feed speeds max. 30.000 mm/min rapid traverse X/Z/B: 30 m/min rapid traverse C: 400 min/-1 total power requirement 39 kVA weight of the machine ca. 6,0 t dimensions of the machine ca. 5,0 x 2,5 x 2,3 m CNC - Turning- and MillingCenter MORI SEIKI - NL 2500 SMC / 700 - Tool-Drive - C-Axis - Subspindle - WITHOUT extraction system

Condition: used, Year of construction: 2013, x-travel 600 mm y-travel 530 mm z-travel 510 mm Control M 730 BM MAPPS IV max. spindle speed 10.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 transmission ratio 1 spindle diameter in front bearing 80 mm table surface area 900 x 600 mm max. table load 800 kg T-slots 6x 18 x 100 mm distance spindle /table 150 - 660 mm number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 150 mm max. tool length 300 mm Dodjx R Enbspfx Al Sjku max. tool weight 8,0 kg change-time tool to tool ca. 1,3 sec change-time chip to chip ca. 3,45 sec rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 30.000 mm/min Tipp feed 0 - 5.000 : 20 mm/min total power requirement 30 kVA weight of the machine ca. 6,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - Machining Center Vertical MORI SEIKI - NVX 5060 II / 40

Condition: good (used), Year of construction: 1990, CNC machining center Manufacturer: MORI SEIKI Type: Partner M300 A-1 Year of manufacture: 1990 Control: FANUC O-M Travel distances: X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis): 25 – 325 mm Distance between spindle nose and pallet table (Z-axis): 125 – 620 mm Rapid traverse: 24 m/min Feed rate up to 5 m/min Spindle: Ball screw: 36 mm diameter Feed drives FANUC AC X/Y-axis Model 5, Z-axis Model 10 Main spindle speed: 100 – 6000 rpm Main spindle motor: AC 5.5 kW Main spindle taper: BT 40 Pallet: Pallet size: 315 x 315 mm Pallet indexing angle: 7.5 degrees Indexing accuracy: + / - 2 sec. Repeatability: + / - 1 sec. Pallet clamping force: 3,400 kg Maximum workpiece weight: 150 kg Automatic tool changer: Djdpfx Alet Rg E Ss Sjku Number of tools: 30 Tool change time: 2.5 sec. Collet clamping time: 7 sec. Maximum tool diameter: 110 mm Maximum tool length: 250 mm Maximum tool weight: 8 kg Special accessories: End-of-cycle indicator with warning light Magazine for 30 tools Operating hours display Tool life monitoring Coolant system Work area lighting Weight: approx. 4,500 kg Space requirement: 1,900 x 2,300 mm 51026ä

Condition: ready for operation (used), A Mori Seiki CNC lathe is available. Swing diameter over bed/slide: 450mm/300mm, max. turning diameter: 160mm, turning length: 525mm, travel X/Z: 135mm/560mm, bar capacity: 42mm, spindle bore: 52mm, spindle nose: JIS A2-5, spindle speed: 5000rpm, power: 7.5kW, torque: 172Nm, tool stations: 12, tailstock taper: MK4, quill diameter: 75mm, quill stroke: 80mm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2500mm/1500mm/1700mm, weight: approx. 3250kg, control: Fanuc Series 15-T. Documentation available. An on-site inspection is possible. Djdpfx Aljzipf So Sjku

Condition: good (used), Year of construction: 2003, functionality: fully functional, For sale used Mori Seiki VL-25A1 in excellent condition. Year: 2003 Mori Siki Mori Siki Mori Siki Mori Siki, 2003. Delivery parity: EXW Székesfehérvár. We can assist in disassembling and assembling the machine on request. Dedpfx Aleuf Tb Us Ssku

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning length: 1,020 mm, turning diameter over cross slide: 580 mm, spindle motor power: 22,000 W, travel distance X-axis: 565 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,080 mm, rotational speed (max.): 4,500 rpm, overall weight: 12,000 kg, For Sale: Mori Seiki MT2000SZ Multi-Axis Turn-Mill Center For sale: A highly versatile and efficient Mori Seiki MT2000SZ multi-axis CNC turn-mill center for demanding industrial production. This machine enables complete machining of complex components in a single setup using its main spindle, sub-spindle, B-axis milling spindle, and lower turret. General Information Manufacturer: Mori Seiki Model: MT2000SZ Control Unit: MAPPS / MSG-501 (Fanuc) Year of Manufacture: 2001 Technical Specifications Capacity & Travel: Max. Turning Diameter: 550 mm Max. Turning Length: 1,020 mm X-axis Travel: 565 mm Y-axis Travel: ±80 mm Z-axis Travel: 1,077 mm B-axis (Milling Spindle): ±120° (0.001° indexing) Main Spindle & Sub-Spindle: Main Spindle Speed / Power: 4,500–6,000 rpm / 22 kW / Bar Capacity Ø 65–73 mm Sub-Spindle Speed / Power: 4,500–6,000 rpm / 15 kW C-axis: Both main and sub-spindle (0.001°) Milling Spindle (Upper Head) & Tool Magazine: Milling Spindle Speed: 10,000 rpm Milling Spindle Power: 7.5 kW Tool Magazine (ATC): 60 positions Lower Turret: Tool Stations: 12-position turret (live tooling) Live Tooling Speed: 4,000–6,000 rpm Dimensions & Weight: Dedpfjzy Ntkex Al Soku Dimensions (L x W x H): approx. 3,830 mm x 2,881 mm x 2,650 mm Machine Weight: approx. 12,000 kg Features & Equipment Multi-Axis Configuration: Main spindle, sub-spindle, B-axis milling head, and lower turret Upper Head (Milling Spindle): Full B-axis for driven tools with Automatic Tool Changer (ATC) Lower Turret: Independent lower turret for flexible and high-efficiency simultaneous machining Included Accessories: Plenty of tools, chuck jaws, and user manuals, etc.

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 1764, controller manufacturer: Fanuc, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Control: Fanuc EQUIPMENT Dkjdpfx Alsy Sluqe Sou Accessories as shown in the pictures

Year of construction: 2008, condition: ready for operation (used), A Mori Seiki CNC turning and milling center with counter spindle including automation is available. Tool turrets: 3, tool stations: 3×16, live tools: all stations, X-axis travel: 210mm, Z1/Z2/Z3-axis travel: 300mm/810mm/300mm, main spindle bore: 55mm, spindle speed: 6000rpm, automation robot: LR Mate 200iC 5L, payload: 5kg, reach: 892mm, repeatability: 0.03mm. Machine dimensions X/Y/Z: approx. 3800mm/2700mm/2500mm, weight: approx. 8900kg, control: Fanuc 31i-A, power-on hours: 101035h, operating hours: 68322h, process hours: 34697h. Including an automated CO2 fire detection system, transformer, machine extraction system, 4× workpiece carriers and an automatic diameter detection system. Documentation available. An on-site inspection is possible. Dkodezlt R Djpfx Al Ssu

Year of construction: 2008, condition: ready for operation (used), A Mori Seiki CNC turning and milling center with counter spindle including automation is available. Tool turrets: 3, tool stations: 3×16, live tools: all stations, X-axis travel: 210mm, Z1/Z2/Z3-axis travel: 300mm/810mm/300mm, main spindle bore: 55mm, spindle speed: 6000rpm, automation robot: LR Mate 200iC 5L, payload: 5kg, reach: 892mm, repeatability: 0.03mm. Machine dimensions X/Y/Z: approx. 3800mm/2700mm/2500mm, weight: approx. 8900kg, control: Fanuc 31i-A, power-on hours: 101035h, operating hours: 68322h, process hours: 34697h. Including an automated CO2 fire detection system, transformer, machine extraction system, 4× workpiece carriers and an automatic diameter detection system. Documentation available. An on-site inspection is possible. Dkodpezlt Sbefx Al Ssu

Condition: excellent (used), Year of construction: 1990, Mori Seiki MV-40 machining center Dkodpfey S T D Tox Al Sou Year: 1990

Condition: used, Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Siemens, controller model: 840D, table width: 500 mm, table length: 500 mm, table load: 300 kg, rotary table diameter: 500 mm, rotational speed (max.): 1,200 rpm, overall weight: 14,000 kg, spindle speed (max.): 12,000 rpm, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 181, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We acquired this machine in working condition directly from production; see the videos of the machine in operation before disassembly! The Mori Seiki NMV 5000 DCG is a high-end (simultaneous) 5-axis machine designed for precision manufacturing in industries where complex shapes and tight tolerances are critical. Includes: KNOLL FKA/500 belt filter system + 3 filter rollers. Dksdpfxezlf Eaj Al Sju Filtermist FX5000 emulsion extraction system. Renishaw OMP60 3D probe. Chip conveyor. Spindle cooler. Original Mori Seiki tool storage cabinet. Original documentation + electrical diagrams.

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-6 - Spindle power : 15 [kW] - Spindle speeds : 5.000 [rpm] - Max. bar diameter : 65 [mm] Dedpozqgy Asfx Al Sjku - Max. turning diameter : 356 [mm] TURRET - Number of positions : 12 - X/Z stroke : 260 x 590 [mm] TAILSTOCK - Tailstock type : Numérique - Tailstock stroke : 564 [mm] - Type of cone : CM4 POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 23 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.705 x 1.922 [mm] - Machine height : 2.120 [mm] - Machine weight : 5.400 [kg] EQUIPMENT - CNC : MORI MSX-850 - Tool probe : Renishaw - Coolant tank - Spindle cooling unit - Chips conveyor - Chuck 3 jaws - Electric transformer

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, operating hours: 25,350 h, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 750 mm, number of slots in tool magazine: 120, number of spindles: 1, spindle nose: BT50, spindle speed (max.): 6,000 rpm, Equipment: chip conveyor, Tool breakage option included 7-pallet carousel Dodpfotqfk Njx Al Ssku NC FANUC MF-M6

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, overall weight: 6,100 kg, number of axes: 4, This 4-axis DMG Mori Seiki NL2500Y/700 was manufactured in 2006. It features a robust control unit, MORI SEIKI MSX-850, and includes an integrated mist extraction unit, chip conveyor, tailstock, turret, and tool setter. With a mass of 6100 kg, this turn-mill centre is designed for high-performance machining. If you are looking to get high-quality turning and milling capabilities, consider the DMG Mori Seiki NL2500Y/700 machine we have for sale. Contact us for further details. - Phase: 3- Frequency: 50 Hz- Voltage: AC 200 V- Full Load Current: 113 A- Current Rating of the Spindle Motor: 140 A- Interrupting Capacity: 5 kA- Short Circuit Rating: 1 kA- Rated Power: 39 kVA- Mass of Machine: 6100 kg- Control Unit: MORI SEIKI MSX-850- Additional Equipment / Attachments: Integrated mist extraction unit (SARA UC1 SDIV), chip conveyor / chute integration, tailstock, turret, tool setter / probe arm Technical Specification Dksdpfx Asz A Uz Nel Sou Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 300 kg, spindle speed (max.): 12,000 rpm, The machine spindle was recently replaced. The corresponding report can be provided upon request. TECHNICAL DETAILS Travel X-axis: 730 mm Dodoy N N Suepfx Al Seku Travel Y-axis: 510 mm Travel Z-axis: 510 mm Rapid traverse X-axis: 50 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 40 m/min Table width: 500 mm Table height: 870 mm Table length: 500 mm Table load capacity: 300 kg Rotary table diameter: 500 mm Rotational speed (max.): 1,200 rpm Spindle speed (max.): 12,000 rpm Spindle interface: HSK-A63 Workpiece height (max.): 450 mm Workpiece weight (max.): 300 kg Tool length: 300 mm Tool diameter: 125 mm Tool weight: 8,000 g Number of tool magazine slots: 180 MACHINE DETAILS Control unit: Siemens 840 D Total weight: 14,800 kg Incoming voltage: 400 V EQUIPMENT Mori Seiki tool application manual KNOLL FKA/500 band filter system + 3 filter rolls Filtermist FX5000 emulsion extraction unit Renishaw OMP60 3D probe Chip conveyor Spindle chiller Documentation + circuit diagrams

Condition: used, TECHNICAL DETAILS - Number of axes : 4 - Number of spindles : 1 - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-8 - Spindle power : 18,5 [kW] - Spindle speeds : 4.000 [rpm] - Max. bar diameter : 80 [mm] - Max. machining length : 728 [mm] - Max. turning diameter : 460 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260/795 [mm] - Y stroke : +/- 50 [mm] - Tool type : BMT - Live tools speed : 6000 [rpm] TAILSTOCK - Tailstock type : Numérique - Type of cone : CM5 - Tailstock stroke : 650 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 39 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.110 x 1.922 [mm] - Machine height : 2.120 [mm] - Machine weight : 6.100 [kg] Dkedpfex Tvklsx Al Seu MACHINE HOURS - Number of hours under power : 26654 [h] - Number of working hours : 15488 [h] EQUIPMENT - CNC : CELOS - Interactive programming : MAPPS 4 - Interface : USB, PCMCIA, RJ45, RS232 - Tool probe : Renishaw - Coolant tank * with high-pressure pump : 15 [bars] - Chips conveyor - Tool probe - Parts catcher - Parts conveying strip - Bar loader : LNS QUICK LOAD SERVO 80 S2 - Number of fixed tool holders : 9 - Number of turning tool holders : 3 - Electric transformer - Collet chuck

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: SL154SY, turning length: 750 mm, turning diameter over cross slide: 510 mm, turning diameter: 680 mm, spindle motor power: 7,500 W, spindle speed (min.): 50 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 56 mm, travel distance X-axis: 215 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 550 mm, mount diameter: 20 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 6,000 m/min, rapid traverse Z-axis: 24,000 m/min, rotational speed (max.): 3,000 rpm, rotational speed (min.): 20 rpm, type of input current: three-phase, feed length X-axis: 215 mm, feed length Y-axis: 70 mm, feed length Z-axis: 550 mm, torque: 70 Nm, bar passage: 56 mm, total height: 2,015 mm, total length: 3,336 mm, total width: 1,873 mm, Equipment: rotational speed infinitely variable, MORI SEIKI SL154SY LATHE WITH LNS BAR FEEDER RENISHAW LASER CHECKED Dkodpfx Alexddfvo Sou TOOLBOX. MACHINE INSPECTED AND READY TO WORK IN OPTIMAL CONDITIONS.

Condition: used, Year of construction: 1996, operating hours: 48,257 h, functionality: fully functional, machine/vehicle number: 299, Equipment: documentation/manual, Mori Seiki SL150 & Iemca short bar feeder. The machine is fully functional. 12-Station Turret with Tool Holders MSC-518 (Fanuc ) CNC Control 8″ Hydraulic Chuck 2 Step gear spindle for powerful torque Dkodpfjzg A Sasx Al Sou Hydraulic Tailstock with Power Quill Chip Conveyor Coolant System. Automatic Lubrication system Parts catcher

Condition: ready for operation (used), Year of construction: 2009, spindle motor power: 18,000 W, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 795 mm, overall weight: 5,800 kg, number of axes: 5, This 5-axis MORI SEIKI NL 2500 SY was manufactured in 2009. It features a maximum spindle speed of 4,000 rpm, a Y-axis travel of ±60 mm, and a Z-axis travel of 795 mm. The machine is equipped with a robust turret capacity of 12 stations and offers simultaneous turning and milling capabilities. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NL 2500 SY turn-mill centre we have for sale. Contact us for further details. • Rapid traverse rates: • X: 30 m/min • Z: 30 m/min • Y: 10 m/min • Main spindle: • Spindle nose: A2-8 • Max bar capacity: 80 mm • Chuck: Kitagawa B-210, Ø250 mm • C-axis: 360° positioning • Sub-spindle: • Spindle nose: A2-6 • Integrated motor power: 15 kW • Chuck: Kitagawa B-208, Ø210 mm • C-axis: 360° positioning • Parts transfer capability: Yes • Milling/driven tools: • Turret capacity: 12 stations • Driven tool stations: 12 • Driven tool motor power: 5.5 kW • Max driven tool speed: 6,000 rpm Dkedozcp Hqspfx Al Sou • Direct drive tooling, live tool milling, off-centre machining • Turret and tooling: • Turret indexing time: 0.2 sec • Automatic tool measurement: Dual Renishaw tool measuring arms • Mechanical construction: • Guideways: Hardened box ways (prismatic) on all axes • Spindle drive: Built-in integrated motors • Transmission: Direct drive (no belts/gearboxes) • Starting torque: 640 Nm • CNC control: • Control: Mori Seiki MAPPS IV • Conversational programming, load monitoring, tool wear/consumption monitoring • Cooling and lubrication: • Main spindle oil cooler: Daikin • Sub-spindle oil cooler: Daikin • Connectivity: • USB, PCMCIA, RS-232 • Bar feeder interface: Included • Machining capabilities: • Simultaneous turning and milling • Y-axis machining • Polar coordinate interpolation • Off-centre drilling and tapping • Front and back working with sub-spindle • Complete part machining in a single setup • Complex multi-axis machining • Typical applications: • Precision turned components • Aerospace parts • Automotive components • Hydraulic components • Medical components • General precision engineering Additional equipment • LNS automatic bar feeder, 1.5 m capacity • Automatic parts catcher • Chip conveyor: Side-mounted hinge belt type • Independent chuck foot pedals (main and sub-spindle) • Electrical transformer • Documentation package: • Operation manual • Programming manual • Parts list • Electrical schematics • Tool holders: Static and driven tool holders included • Other optional equipment: Not included Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 850 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, nominal power (apparent): 22 kVA, controller manufacturer: MORI SEIKI, controller model: MSX-711 IV, table load: 500 kg, number of slots in tool magazine: 60, tool length: 500 mm, tool diameter: 140 mm, tool weight: 12 g, MORI SEIKI NH-5000 DCG/40 Horizontal Machining Center The MORI SEIKI NH-5000 DCG/40 is a high-performance horizontal machining center, designed to ensure exceptional precision, reliability, and continuous productivity, even for the most complex machining operations. Main features: Year of manufacture: 2010 CNC Control: Mori Seiki MSX-711 IV Machine weight: 12,700 kg Machine footprint (LxWxH): 4,628 x 4,952 x 3,012 mm Spindle: Dkjdpfswxygzjx Al Sou Spindle taper: ISO-40 Maximum speed: 14,000 rpm Spindle motor power: 18.5 / 22 kW (S1/S6) Working Capacity (axis travels): X axis: 730 mm Y axis: 730 mm Z axis: 850 mm Distance spindle center – pallet surface: 100 – 830 mm Distance spindle nose – pallet center: 100 – 950 mm Max. workpiece dimensions: Ø800 x 1,000 mm Rotary table: Dimensions: 500 x 500 mm Number of stations: 2 (with automatic pallet changer) Pallet load capacity: 500 kg Continuous table rotation: 360,000 positions Feed rates: Rapid traverse (X/Y/Z): 50,000 mm/min Working feed rates (X/Y/Z): 1 – 50,000 mm/min Tool changer: Tool taper: MAS BT-40 Shank: 90° Mori Seiki type Tool magazine capacity: 60 positions Max. tool diameter: Ø140 mm (without adjacent tools: Ø70 mm) Max. tool length: 500 mm Max. tool weight: 12 kg Equipment and accessories: Chip conveyor Coolant collection tank with wash pumps + external tank with paper filter High-pressure coolant pump through the spindle line Spindle head air conditioner and transformer Retractable tool presetting sensor Full technical documentation (manuals, electrical diagrams, CE declaration) Ideal for advanced machine shops and intensive production, the NH-5000 DCG/40 combines structural rigidity with advanced CNC technology, ensuring high-speed, high-precision machining of complex parts.

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of turrets : 1 - Number of axes : 6 Dkedex Tvkrjpfx Al Sju MAIN SPINDLE - Spindle nose : A2-8 - Max. bar diameter : 80 [mm] - Spindle power : 18,5 [kW] - Spindle speeds : 4.000 [rpm] - Max. turning diameter : 460 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260 x 795 [mm] - Y stroke : +/- 50 [mm] - Live tools speed : 6.000 [rpm] - Live tools power : 5,5 [kW] COUNTER-SPINDLE - Spindle nose : A2-5 - Max. bar diameter : 51 [mm] - Max. turning diameter : 190 [mm] - Spindle power : 11 [kW] - Spindle speeds : 6.000 [rpm] - C axis indexing precision : 0,001 [°] - Travel : 760 [mm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 42 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 4.414 x 2.370 [mm] - Machine height : 2.115 [mm] - Machine weight : 6.200 [kg] MACHINE HOURS - Number of hours under power : 15525 [h] - Number of working hours : 12865 [h] EQUIPMENT - CNC : Mitsubishi MSX-850II - Interactive programming : MAPPS III - Interface : USB / PCMCIA / RJ45 - Tool probe : Renishaw - 3 colors status lamp - Tailstock function - Coolant tank - Chips conveyor : Droite - Spindle cooling unit - Parts catcher - Bar loader : LNS Quick LoadSERVO 80 - Parts conveying strip - Number of turning tool holders : 2 - Number of fixed tool holders : 10 - Chuck 3 jaws

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,000 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 820 mm, overall weight: 6,000 kg, number of slots in tool magazine: 12, number of axes: 3, Horizontal turning machine manufactured in 2008. This MORI SEIKI NL 3000 MC/700 features a maximum turning diameter of 430 mm and a turning length of 713 mm. It includes a 12-station turret for efficient tool changes and operates at a spindle speed of 3000 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL 3000 MC/700 machine we have for sale. Contact us for further details. - Chuck: 12" (3-jaw chuck)- Max Turning Diameter: 430 mm- Swing Over Bed: 978 mm- Turning Length: 713 mm- Phase: 3 Phase- Frequency: 50 Hz- Voltage: AC 200 V- Full Load Current: 133 A- Current Rating of Spindle Motor: 300 A- Short Circuit Current: 1 kA (220 V Maximum)- Rated Power: 46 kVA- Machine Dimensions: 3,400 mm x 2,089 mm x 2,270 mm- Optional Accessories/Equipment: Tooling, chip conveyor, accessories/manuals available Djdpfxezwxzxs Al Soku Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, We are selling a CNC turning machine, model SL2500SY/650. Year of manufacture: 2002 Control system: MSG 805 V Software: MAPPS Spindle motor: 22 / 18.5 kW Counter-spindle motor: 11 / 7.5 kW Dksdpfxezv N Nqs Al Sou VDI turret Chip conveyor 2-stage clamping system Interface for a bar feeder Travel distances: X 305 mm Z 690 mm Y 120 mm Max. turning diameter: 490 mm Standard turning diameter: 260 mm Max. turning length: 650 mm Max. spindle speed: 4000 rpm Spindle bore: 88 mm