Used Multi Boring Machine for sale (66,380)

Condition: used, Year of construction: 1971, Used long hole boring machine Bsdpoypbx Sefx Al Ijdb Brand: Rex LB MK/S Year of manufacture: 1971 Motor power: 1.7 kW Table size: 400 x 220 mm Drill chuck: 2-jaw chuck Motor speed: 2860 rpm Required space (LxWxH): approx. 900 x 700 x 1200 mm

Condition: like new (used), Ryazan Model PT295106 Deep Hole Borer x 4000mm Manufacturer Ryazan Model PT295106 Year 1985 Condition Used Stock Number 2850 Centre Height 550mm Solid Boring Capacity 200mm Max Boring Length 4000mm Bsdpfx Aexzp Rlsl Ijdb Headstock Hollow spindle 500mm Headstock Spindle speeds 16-250 rpm Headstock drive 50/75kw Max boring length in front of headstock 3500mm Max boring length if using the 500mm hollow spindle 4000mm

Condition: excellent (used), Heidenrich & Harbeck B3 SB Deep Hole Borer 10,000mm Capacity, 4 off Steady Rests 2 off Boring Bar Dampers Swarf Tray & Baskets Tooling, Counter Rotation Bjdpew U Uhksfx Al Ijdb

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Bdjdpfslhwr Rsx Al Ijb Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: excellent (used), Numerical Control Type NC 500 (Software Tooling System) Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) No. 8 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 4 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 72,2 Bedpfeyvrrqox Al Ijdb The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (X axe) of the conveyor belts The CNC controls the movement (Y axe) of the stops The CNC controls the movement (Z axe) of all the vertical units

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 620x560x1720 mm Bdodpfxjv A Hm Ro Al Ijb Weight 110 kg Total power requirement 0 kw

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, drilling depth: 660 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 1,000 mm, drill diameter: 30 mm, TECHNICAL DETAILS Drilling depth: 660 mm Drill diameter: 30 mm X-axis travel: 700 mm Y-axis travel: 500 mm Bedpfx Aloya U U Us Iedb Z-axis travel: 1,000 mm W-axis travel: 250 mm Spindle speed: 60 - 60,000 rpm Table length: 900 mm Table width: 500 mm Table load capacity: 2,000 kg MACHINE DETAILS Control system: Heidenhain iTNC530 Dimensions & Weight Dimensions (L x W x H): 3,706 x 3,960 x 2,650 mm Total weight: 8,000 kg EQUIPMENT CNC rotary table (4th axis) Chip conveyor Paper band filter Electronic handwheel Original documentation

Condition: used, Year of construction: 1987, spindle diameter 130 mm x-travel 3000 mm y-travel 1600 mm z-travel 1250 mm Control Heidenhain type TNC 426 table surface area 2000x1600 mm Table load 12500 kg Rotary table 360 ° Bdodpfx Aoyutq Del Iob spindle turning speed range 12-3000 U/min Feed 1-9999 mm/min Rapid movement 10000 mm/min total power requirement 80 KVA The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1988, spindle diameter 90 mm x-travel 2000 mm Bedpfoyutqkox Al Iedb y-travel 1250 mm z-travel 1250 mm spindle turning speed range 8-1600 U/min spindle stroke 720 mm Feed 1-2500 mm/U weight of the machine ca. 9,1 t 31881-07/9 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 332046, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,200 mm, spindle speed (max.): 850 rpm, spindle speed (min.): 6 rpm, feed rate X-axis: 8 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 1 m/min, total width: 10,000 mm, total length: 14,000 mm, total height: 4,500 mm, spindle diameter: 160 mm, table load: 40,000 kg, table length: 3,000 mm, table width: 3,000 mm, workpiece weight (max.): 40,000 kg, overall weight: 71,000 kg, drill spindle length: 1,200 mm, year of last overhaul: 2002, power: 60 kW (81.58 HP), The machine is on stock and being reassembled for continious use. A combination with 3x3 m TDV5 rotation table enables most demanding machining operations. Machine will be available for inspection under power. Bedpeuplptofx Al Ijdb

Condition: like new (used), operating hours: 20 h, functionality: fully functional, TECHNICAL DATA Number of spindles: 21 Distance between first and last drill bit: 640 mm Distance between centers of individual spindles: 32 mm Maximum workpiece size: 50 x 915 x 3000 mm Maximum drilling depth: 65 mm Number of pneumatic hold-downs: 2 Working table height of the drilling machine: 860 mm Maximum hold-down height above table: 70 mm Operating pressure: 6–7 bar Air consumption: 10 l/cycle Motor power: 1.5 kW Noise level: 76.1 dB Speed: 2800 rpm Dimensions L/W/H: 1030/1030/1285 mm Weight: 275 kg PRODUCT FEATURES Main features of the machine: - Single-head drilling machine for drilling operations from 0 to 90° - Pneumatically adjustable drilling head angle - Cast-iron stops - Spindles suitable for quick couplings - Patented pneumatic workpiece clamps - Cast-iron worktable - Fast and precise adjustment - Accurate drilling - Made in Italy Standard equipment of the machine: - 2 aluminium measuring scales, each 1.5 m (right and left) with two stops - 5 quick couplings - Wooden transport box for machine protection during transport ADVANTAGES - Drilling vertically/horizontally/at an angle - Multi-spindle drilling machine - New machine - CE certificate - Robust Bjdpfx Alsy At Ndo Ijdb - Professional Net price €2,950.- Machine shipping not included Packaging included Net prices apply to international transactions and EU customers with a valid EU VAT ID No.

Condition: used, Used machine Equipment and technical data: - Universal dowel drilling machine for horizontal and vertical drilling - Working width 720 mm - With drilling beam, drive motor 3 HP, 2800 rpm - 23 drilling spindles, drilling pitch 32 mm - Pneumatic workpiece clamping via foot pedal - 2 stop rails 1000 mm - with undercarriage Availability: short-term Storage location: 63934 Röllbach Bdsdpfx Aeyq T Iuel Ieb

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, machine/vehicle number: 35114, travel distance X-axis: 600 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 4,000 rpm, controller model: HEIDENHAIN TNC 124, No minimum price - guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item within the specified timeframe: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Travel X-axis: 600 mm Bdedpfxeym Nuve Al Ijb Travel Y-axis: 300 mm Travel Z-axis: 600 mm Travel W-axis: 650 mm Spindle speed: 0 – 4,000 rpm Table dimensions: 1,000 x 680 mm Drilling diameter, twist drill: max. 16 mm Single-lip drill: 4 – 16 mm Thread cutting: max. M12 MACHINE DETAILS Control: HEIDENHAIN TNC 124 Operating voltage: 400 V Frequency: 50 Hz Rated current: 14.2 A Connected load: 0.8 kVA Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,500 x 2,100 mm Weight: 2,000 kg EQUIPMENT With 4 T-slots Including various tool holders External reference: Laubender

Condition: used, Year of construction: 1993, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Bdsdpfxewhuu Es Al Ieb Height adjustment range: 135 mm Motor power: 1.3 / 1.8 kW Speed: 1400 / 2800 rpm Holder clamp: manual Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg

Condition: used, Year of construction: 1999, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Bdedpfx Ajv S Diuel Ijb Height adjustment range: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 250 kg

Condition: as good as new (ex-display), Year of construction: 2022, Dowel hole drilling device: Pitch 16, 22 25, 32 Drilling depth: 150 mm Bdsdogzlq Ejpfx Al Ijb Slot length: 250 mm Height adjustment range: 145 mm Motor power: 1.5 kW Speed: 3000 rpm Suction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 160 kg

Condition: new, Year of construction: 2022, Dowel hole drilling device: no Drilling depth: 150 mm oblong hole length: 180 mm Height adjustment travel: 145 mm Motor power: 1,5kW Speed: 3000 rpm Suction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Bdsdpfx Aogq Un Asl Ieb Weight: 240 kg

Condition: used, Year of construction: 1990, spindle diameter 150 mm x-travel 4000 mm y-travel 3000 mm z-travel 1000 mm w-travel 1500 mm Table area 2000x2000 mm Table load 30 t Feed 3-3500 mm/min Rapid movement 5000 mm/min transmission ratio 2 spindle power 37 kW total power requirement Heidenhain kW voltage 380 V frequency 50 Hz type ITNC mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Bjdpfx Alsyqtf Ts Iodb

Condition: used, Year of construction: 1971, core drilling diameter max. 50-355 mm Bodpfx Aeyt Rz Djl Iedb bore depth 4000 mm swing diameter 1000 mm centre height 500 mm full boring 18-100 mm main spindle bore 163 mm turning speeds 56-710 U/min workpiece weight 6,3/10 t Tailstock 70-600 mm Drill pipes, guide block, drill head, rolling steady rest, support bearing drill heads, jaws 21- 240 mm, Holder, tools, shelves, cupboards The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, compressed air connection: 5 bar, From business closure Schleicher dowel drilling machine DBS 1000 Year of manufacture: 1979 Also ideal for line boring with 5mm holes, 32mm spacing Bdodsx Avf Sspfx Al Isb Comes with 25 pcs. 5mm carbide-tipped brad point drills and 8mm carbide drills, as well as 16mm and 35mm drill bits for cup hinges and other drill bits Pneumatically tiltable to horizontal/vertical position Machine is mobile Payment in cash upon collection No warranty

Condition: used, Year of construction: 2016, working length 20-1250 mm working width 50-800 mm Bodoym Rqropfx Al Ijdb working thickness 10-60 mm cnc controlled in X / Y / Z 3 spindle drilling head machine without the gluing pump

Year of construction: 1990, condition: ready for operation (used), Multi-edge milling machine for 2 - 4 - 6 edge milling on manual or CNC milling machines Manufacturer WITTE Type: MKF 1001, year 1990. For milling spindle ISO 40 Working range: SW 2 - SW 30 Bdedpfovmglzex Al Ijb Length: 75 mm Spindle passage: 25 mm Weight approx. 25 kg. Operating instructions available.

Condition: excellent (used), IMSA DEEP HOLE DRILLING MACHINE MODEL MF 1000 BB TRAVELS: LONGITUDINAL AXIS: 1250 mm CROSS AXIS (MILLING QUILL): 380 mm CROSS TRAVEL OF HEAD: 500 mm VERTICAL TRAVEL: 1000 mm ROTARY TABLE SIZE: 1000x800 mm TOTAL MACHINE WEIGHT: 20,000 kg Bdedpfoytff Dox Al Isb

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, drilling depth: 2,250 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 4,500 rpm, drill diameter: 40 mm, table length: 1,600 mm, table width: 1,300 mm, table load: 20,000 kg, Deep Hole Drilling, Milling and Tapping Machine 5 linear axes X, Y, Y1, Z, W Rotary table axis B Equipped with 3D CAD simulation, WISE PLUS system, electrical cabinet cooling, and fume extraction system. Capacity Gun drilling capacity: 40 mm Table X-axis stroke: 2000 mm Ram Y-axis stroke: 1500 mm Column Z-axis stroke: 700 mm Spindle taper: ISO 50 – DIN 69871 Motor power: 22 / 33 kW Table size: 1600 × 1300 mm Technical Specifications Drilling diameter range: Ø 5 – Ø 40 mm Maximum drilling depth: 2250 mm Milling capacity with cutting tools up to: Ø 60 mm Drilling axis inclination: W -15° / +25° Milling capacity: 400 cm³/min Filtration and cooling system tank capacity: 2000 L Maximum pressure: 80 bar Direct gun drilling with guide bushings: up to Ø 20 mm Rotary table load capacity: 20,000 kg Positioning: 360,000 positions Bdjdpfxsyuc Rto Al Isb 9 T-slots 18 H12 P=140 Positioning accuracy: ± 0.2 sec Linear Axes X: 2000 mm Y: 1500 mm Z: 700 mm W: 1630 mm

Condition: good (used), Year of construction: 1990, Ref. -No.: 10542 Manufacturer: GILDEMEISTER Bdjdexmd Txepfx Al Ijb Type: AS - 16 Year of construction: 1990 Max. Rod diameter: 16 mm Number of spindles: 6 Pcs Guide rod length: 3,3 m Further information: The machine can be viewed under power by arrangement.