Used Multi Head Cross Cut for sale (37,175)

Condition: excellent (used), functionality: fully functional, saw blade diameter: 420 mm, Motor 400 V / 2.0 kW Speed 3500 rpm Cutting length 410 mm (at 90°) Cutting height 170 mm (at 90°) Mitre range horizontal 45°-90°-25° Vertical mitre range 90°-45° (left) Saw blade O 420 mm Suction nozzle 100 mm Weight 120 kg Gijdpfx Abjxdtlfjdjl

Condition: excellent (used), functionality: fully functional, cutting height (max.): 100 mm, cutting width (max.): 150 mm, cutting length (max.): 352 mm, total width: 800 mm, total length: 4,150 mm, total height: 1,300 mm, saw blade diameter: 330 mm, overall weight: 600 kg, type of input current: three-phase, disc diameter: 330 mm, rotational speed (max.): 2,800 rpm, BLITZ 330-L double mitre saw for wood, aluminium Specification: • Condition – used, after inspection/service • Manufacturer – BLITZ • Model – 330-L • Main motors – 2 x 1.5 kW and 2,800 rpm • Pneumatic head control • Max. cutting length – 352 cm • Min. cutting length – 38 cm • Max. cutting cross-section – 100x150 mm (at right angle) Gedpfx Abexl Eadsdsil • Max. blade diameter – 330 mm • Spindle axis – 20 mm • Miter cutting range – from -45 to +45 degrees (right, left) • Vertical workpiece clamps • Weight – approx. 600 kg • Overall dimensions – 415 x 80 x 135 cm (L x W x H) Additional information: • Very good, factory technical condition • Photos shown reflect the actual condition of the item for sale • Possibility to power up and test the machine on site

Condition: used, OMGA T421 IDC000097 - saw blade diameter: 400 mm - complete with saw dust filter Gsdpfx Aju Dhupsbdsil

Condition: used, Year of construction: 2013, functionality: fully functional, One side scanner for sorting or optimization: Width: 30-200mm High: 13-50mm Length: 2-6m Possible to detect: Knots, wood structure, cracks, end cracks, color variations etc. Scanning speed: up to 200m/min Giodjv Tlgdopfx Abdsl Possible to scan different profiles

Condition: new, Specification type S120/S260 Working width 20-120mm/20-260mm Working thickness 12-50mm/12-80mm Max. cutting size 80x50mm/180x80mm/150x100mm Width of work table 330mm/330mm Min. ingoing length 400mm/400mm Feeding table width 80m/min/80m/min Number of main feeding wheels 5/5 Saw blade 405mm/455mm/455mm/510mm Gisdpeq Ny Efsfx Abdol Saw spindle speed 3500r/min/3500r/min Saw blade motor power 5.5kw/5.5kw Saw blade speed (up-down) 2-4 times/1sec./2-4 times/1sec. Lifting motor power 3kw/3kw Feeding motor power 3kw/3kw Pressing wheel motor power 0.18kw/0.18kw Total power 12.43KW/12.43KW Air Tolerance 1000NL/min/1000NL/min Air Pressure 0.6mpa/0.6mpa Diameter of dust extraction Ф140mm/x2/Ф140mm/x2 Extraction speed 30m/s/30m/s Weight 1000/1000 KG Dimensions 6500x1400x1800mm/6500x1400x1800mm Price: 31000/32500 € (EXW Jonava, Lithuania)

Condition: excellent (used), Year of construction: 1993, functionality: limited functionality, machine/vehicle number: 6145, cutting height (max.): 75 mm, cutting width (max.): 200 mm, cutting length (max.): 6,000 mm, saw blade diameter: 450 mm, type of input current: three-phase, cross cutting line with infeed opticut and 6 automatical packing/stacking units , partly renovated ( more details by contacting ) Giodpew I Dpqefx Abdel

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 2301.14, Sawn timber length cross cut line, timber width 20 - 300 mm, height 10 -100 mm Gjdpfx Abew Rr Dbedoil

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OMGA V 235 - precise cutting from the program, - with a controlled ruler, (with a stop) Gedpfxjw Tc Hrs Abdjil - 3.7Kw, 350mm sheet size.

Condition: used, Double rip saw IDL000811 Gisdpfx Aou At Tbjbdol - max width: 2500 mm - electric cabinet - manufacturer: Tegle/norway

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total width: 1,500 mm, total length: 11,300 mm, total height: 1,800 mm, cutting width (max.): 350 mm, saw blade diameter: 550 mm, roll width: 430 mm, spindle diameter: 35 mm, cutting length (max.): 5,300 mm, hole diameter of the disc: 35 mm, CEMIL TR550 semi-automatic cross-cut saw Specification: • condition - used, ready to work • manufacturer - CEMIL • model - TR550 • max working width - 350 mm • max working height - 130 mm • maximum cutting length - 530 cm • blade diameter 550 mm • blade mounting spindle - 35 mm • blade speed - 3080 rpm • right, receiving table 505 cm long • left table 600 cm long • tables and feed 43 cm wide Gjdpfx Abjwa Dhlsdeil • adjustable cutting speed • adjustable pusher speed • possibility of working in automatic and manual cycle • in the machine, possibility of setting, among others length and number of cut elements, board length, waste length • extraction nozzle - fi 140 mm • weight approx. 280 kg • instructions in Italian, control partially translated into Polish • overall dimensions after unfolding - 11,300 cm x 150 x 180 cm (length x width x height) • body dimensions - 110 x 150 x 180 cm (length x width x height) Additional information: • very good, factory technical and visual condition • the photos show the actual condition of the item for sale • possibility of switching on and checking the device on site • the price given in the auction does not include VAT

Condition: refurbished (used), C11 MKL Cross-Cut Optimization Line, offered by Wood Expert Industry, is a state-of-the-art technological solution designed specifically for industrial wood processing and operational workflow optimization in woodworking facilities. All equipment comprising the processing line is manufactured by Paul Germany and was completely overhauled in July 2025 with zero operating hours. Paul C11 MKL Lumber Optimization Line Components - 9.0 m / 230 mm Inclined Conveyor Belt Ideal for the automatic and efficient handling of wood pieces towards the processing area, equipped with a guided belt and robust clamping parts for stable transport. - Measuring Station with Luminescent Scanner and Photocell Allows precise identification of the start and end of workpieces, featuring dedicated lower rollers for high-accuracy measurements. - Pressure Roller Unit Ensures correct alignment and pressing of pieces between 250 and 4200 mm, with manual adjustment available according to the material thickness. - Reinforced Marking Rails, Left and Right Automatically pre-marks cutting positions for increased efficiency and accuracy in subsequent processing. - C11 MKL Optimizer – CNC Cross-Cut Saw Station Includes a robust welded steel frame, 500 mm TCT blade, 5.5 kW servo-driven motor, variable speed, and an advanced feeding system with lower/upper rollers for precise piece guidance. Electric adjustment of the upper rollers allows automatic adaptation to wood thickness. The system features automatic waste extraction, extraction ports, CE safety compliance, and advanced cutting quality options (blade with 132 conical teeth). - Waste Extraction System Comprises an 11.5 m / 230 mm conveyor belt and ascending waste belt (3.0 m / 500 mm with collection hopper), optimizing material flow and disposal of residues. - Length Sorting System With pneumatic ejectors and basic sorting equipment, this facilitates automatic organization and discharge of pieces to two outfeed positions, increasing line productivity. - Maxi8 Premium Operator Terminal and Optimization Software 17” touchscreen terminal, dust-protected, remote diagnostics, Linux-based, with dedicated optimization software (up to 60 cutting lists, 9 grading options, 400 preset lengths/list), advanced statistics, network integration capability. Includes data import/export options via USB. - Control and Automation Equipment Gedpfxow Emf Rs Abdeil Standardized electric cabinets, control panels, complete installation and wiring performed with high-quality components for intensive industrial use. Benefits of integrating this line: - Fully automated cross-cutting process, significantly reducing human error. - Increased efficiency and yield through cutting list optimization and automatic length sorting. - Adaptability to various thicknesses and sizes of workpieces. - Advanced digital control and remote diagnostics for quick interventions. - High reliability, reduced maintenance costs, and adherence to strict CE safety standards. This optimization line can be customized for different types of wood processing facilities, ensuring efficient operation tailored to every client’s requirements.

Condition: refurbished (used), PALLET LINE MULTIBLADE AND CROSSCUTTING MACHINE Godpfx Absqag T Asdsil A.COSTA VOLLMER ARTIGLIO PRIMULTINI STORTI We also have all kind of Sawmill machines

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 1 h, working width: 4,800 mm, color: green, empty load weight: 3,000 kg, operation weight: 3,000 kg, machine/vehicle number: S241480, Equipment: hydraulic folding, lighting, Spearhead Multicut 480 Military Demo machine, year of manufacture 2024 Machine designed for grassland maintenance. However, it can also be used on other surfaces, such as fallow land, maize and rapeseed stubble, etc. Extra heavy-duty military specification. Required power – depending on crop density – ranges between 100 and 200 hp (73 – 147 kW). The Power Drive transmission system is rated for continuous power of up to 225 hp (165 kW). The combination of the unique cutting system with MultiCut blades and rotor ensures a very clean cut and optimal distribution of the cut material. MODEL: MULTICUT 480 Military Working width: 4.60 m Gsdex R Uuwopfx Abdsil Transport width: 2.80 m Length: 4.50 m Minimum power requirement: 100 hp (73 kW) Drive system: Power Drive Maximum load: 225 hp (165 kW) Capacity: 3-6 ha/h Number of rotors/blades: 3/18 MultiCut Slip clutch: 3 units, four-disc clutches Blade speed: approx. 80 m/sec Rotor overlap: 150 mm Operating angle: +90° / -20° Cutting height range: 25-400 mm Wheels: 8 units, 6.00 x 9 Support skids: 4 units Number of supporting discs: 3 units Parallel height adjustment: standard Deck protection ring/guide plate: standard Lighting: standard Tandem axle centre section: standard GAS SPRUNG FOR TRANSPORT 7-YEAR WARRANTY ON TRANSMISSION

Year of construction: 2005, condition: as good as new (ex-display), ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery Giedpsb Rnv Sefx Abdjl cover customer Startup type negotiated Description Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: ADS550×5000, Power supply: 380–420 V / 50 Hz Total power: 5.5 kW Saw motors: 2 × 2.2 kW Saw blade: Ø550 mm Max. cutting length: 5000 mm Min. cutting length: 360 mm at 90° Cutting angles: 45° and 90° Repeatability: ±0.1 mm Air consumption: 60 L/min (0.5–0.8 MPa) Fully CNC controlled Two saw heads that can operate independently or synchronously Automatic positioning of the moving saw head via servo drive Gedox R U Epspfx Abdsil Automatic height measurement system for increased precision at 45° Touchscreen control with clear interface Integrated label printer (traceability & workflow) Infinitely adjustable saw feed Very stable and heavy machine base

Condition: ready for operation (used), Key Specifications – MBP 14‑Head C2T Series: MBP C2 (stainless steel, central-feed, food-grade) Number of Weigh Heads: 14 Weigh Height/Capacity: Up to 5,000 g per weighment Giedpfx Abewqq Nkedsl Operating Speed: Up to ~180 weighments per minute Bucket Type: Smooth stainless-steel buckets – ideal for reducing product stickiness Drive & Controls: Stainless-steel construction for all product contact parts Step-motor‑controlled bucket gates ensure precise portion release Windows‑based multimedia control system with remote access/diagnostics Electrical Requirements: 230 V, 1‑phase, 60 Hz, 10 A Multivac R530 🔧 Key Specifications • Machine Dimensions: o Length: Approximately 6,600 mm to 8,500 mm, depending on configuration o Width: Approximately 1,050 mm to 1,200 mm o Height: Approximately 1,900 mm to 2,000 mm o Weight: Approximately 2,500 kg to 3,175 kg • Film Specifications: o Lower Film Width: Typically ranges from 420 mm to 528 mm o Upper Film Width: Typically ranges from 415 mm to 510 mm o Film Thickness: 50 to 500 microns, depending on material o Advance (Pitch): Commonly between 228 mm to 320 mm • Forming Area: o Length: Up to 521 mm o Width: Up to 400 mm o Depth: Up to 145 mm • Performance: o Cycles per Minute: Typically between 7 to 20, depending on application and configuration • Utilities: o Voltage: 400V, 3-phase, 50 Hz o Power Consumption: Approximately 19 kW o Compressed Air Requirement: 7 to 10 bar o Water Connection: 1.5 to 4.5 bar

Condition: used, Year of construction: 2019, functionality: fully functional, total height: 2,100 mm, total width: 9,000 mm, sheet thickness (max.): 6 mm, punching diameter: 105 mm, overall weight: 17,500 kg, table height: 900 mm, color: blue, power of feed motor: 20,000 W, Punching machine equipped with two independent tool stations with electrohydraulic heads and HiFocus 160i plasma unit from Kjellberg. The machine is characterized by: - automatic adjustment of the plasma torch height, - TRUMF quick tool change system - short changeover time; - X-axis movement range from 0 to 3000 mm, - Y-axis movement range 0d 0 to 1500 mm, - stepless adjustment of feed speeds, - possibility of nibbling, punching and embossing, - stepless adjustment of stroke height up to 90 mm, Gsdpswayiljfx Abdjil - tool punching up to 6 mm thick, - plasma torch cutting up to 12 mm thick, - easy programming. Available functions: - single hole, - row of holes, - circle of holes, - circle nibbling, - rectangular chipping, - matrix, - nibbling of cuts, - object rescaling, - contour program (in combination with Rotation station), - subroutines, - object repetition, - trimming, - hole-free zone, - ellipse, - V-belt, - mirror image, - waste removal. High-quality plasma cutting unit for structural steel, high-alloy steel and aluminum. Reduces the use of additional processing due to the appropriate cutting surface. Water-cooled PerCut 210 plasma torch with high heat dissipation efficiency and long nozzle durability thanks to the use of swirl gas technology.

Condition: good (used), Internal article no.: 24018 HSK-A63 Boring head / fine boring head digital Wohlhaupter Multibore D65-83 Gedpfxstrx Evo Abdoil

Condition: used, Year of construction: 2018, functionality: fully functional, number of straightening rollers: 6, conveyor belt width: 1,300 mm, sheet thickness steel (max.): 1 mm, coil width: 1,250 mm, cutting length (max.): 6,400 mm, straightening roller diameter: 70 mm, space requirement width: 3,500 mm, space requirement length: 18,275 mm, space requirement height: 4,000 mm, Single-person operation, rapid access to a wide variety of sheets, automatic sheet changeover, standard sheets remain loaded in the system; the upper sheets are less common types; secure solution with a movable access aid for loading the upper decoilers; programmable slitting line with 8 pairs of knives in station version; slitting knives are alternately arranged for distortion-free cutting; rotary knives of the AL p with 100 mm diameter to achieve minimal incision; 7.2 m long conveyor belt for discharging the strips. The system layout PDF is shown as a mirror image! Gedpfx Asxwc E Ijbdsil

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, The machine is currently in use. We offer live demonstration, dismantling loading, installation and training on your site Gedpfx Absv Uab Eedeil

Year of construction: 2002, condition: excellent (used), MULTI-PRESS MP.610 6 DIE 6 BLOW Perfect mechanics and electronics ! 12x80 mm 105 mm CUTOFF 170 ppm YEAR 2002 PERFECTLY WORKING Giodpfx Ash Rkhnjbdjl AVAILABLE IN SPAIN SOME PICTURES AND VIDEOS AVAILABLE

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 200 mm -Number of teeth: 12 Giedpfsb E S I Tox Abdel -Indexable inserts: Carbide -Recording: SK50 -Dimensions: 200/200/H330 mm -Weight: 19 kg

Condition: good (used), Thread cutting machine, pipe thread cutter, thread cutting head, thread cutting chuck, thread chuck, thread cutting apparatus -Manufacturer: Rems, thread cutting head -Pipe size: 2 1/2 to 4 inches -Spindle bore: dimensions see pictures -Dimensions: 410/400/H340 mm -Weight: 50 kg Gjdswq Nvispfx Abdeil

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head -Diameter: Ø 100 mm -Number of teeth: 6 Godpeb A Ihdsfx Abdeil -Indexable inserts: Carbide -Recording: SK50 -Weight: 4.5 kg

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutter Godpfx Ajc T Nx Nebdeil -inch thread jaws: 1/2" - 1 1/2" inch -Weight: 9.5 kg