Used Cross Milling Table for sale (25,629)

Condition: good (used), Sine vise Type: for milling, cross tiltable Manufacturer: Stanko Model: 370P 22 Number: 3177 Size: 500 x 200 mm Base area: 500 x 200 mm Number of T-slots: 3 T-slot width: 11 / 20 mm Gsdpowv Dfpefx Aayebt T-slot depth: 6 / 16 mm Height: 100 mm Equipment: cross tiltable Dimensions: 500 x 200 x 100 mm Weight: 31 kg

Condition: ready for operation (used), functionality: fully functional, spindle speed (max.): 510 rpm, table length: 457 mm, table width: 457 mm, overall weight: 1,200 kg, Kearns ‘S’ Type Horizontal Borer Table Size 457 x 457mm Long Travel: 610mm Cross Travel: 305mm Gbodszv T Dlspfx Aayst Vertical Travel: 286mm Facing Head Diameter: 250mm Spindle Speeds (6 off): 45 - 510 RPM

Condition: ready for operation (used), functionality: fully functional, Equipment: documentation/manual, Cross-tenon milling machine Godpfoz Adzzsx Aaysbt Manufacturer: Stegherr Type: KSF Suitable for milling cross-tenon joints in, for example, windows, doors, and furniture. Equipped with 3 milling units. One upper and one lower milling unit mill the two miter-like recesses simultaneously in coordinated operation. A third unit mills the flattening simultaneously. The machine table is moved pneumatically-hydraulically. The feed and return speed is adjustable. With foot-operated control. 2 motors, each approximately 2.2 kW Connected load approximately 4.5 kW Compressed air 6 bar Voltage 380 V 50 Hz Dust extraction port diameter 180 mm Includes 3 milling tools.

Condition: used, Year of construction: 1972, spindle diameter 100 mm Gedpfx Ajzycrgsaysbt x-travel 1400 mm dismantled ja tool adaptor SK 50 digital ja weight of the machine ca. 14 t

Condition: good (used), Year of construction: 1990, Table milling machine with power feed Tilting spindle Gbjdpfxsyy I R Rj Aayot With table extension on both sides

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, cutting width (max.): 3,200 mm, cutting length (max.): 2,200 mm, SUMMA F3220 – Professional Large-Format Cutting Table (2020) SUMMA F3220 - Working area: 327 x 210 cm - Vacuum extraction system 2.3 kW / Noise absorber - Package with 6 pneumatic media clamps + roll holder - Integrated camera - ADC Control module left + right INCLUDED MODULES AND TOOLS - Tangential module (x2) - V-Cut 45° - V-Cut 0° - Heavy Duty Cutout Tool (45° / 90°) - Double Edge Cutout Tool (50° / 60°) - Pneumatic oscillating tool - Creasing tool HIGH-FREQUENCY MILLING MODULE Complete high-frequency milling kit: - Routing module with brush system - SycoTec milling motor - Integrated electronics + vacuum control Gbsdpfx Aaoy Sapvoyst - 6 mm collet Additional accessories - Industrial vacuum cleaner HERCULES 3000W

Condition: excellent (used), Year of construction: 2016, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 800 mm, table load: 25,000 kg, spindle diameter: 132 mm, spindle speed (max.): 2,500 rpm, total height: 50 mm, total length: 80 mm, total width: 50 mm, table length: 2,000 mm, table width: 1,750 mm, feed length W-axis: 10,000 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, rotational speed (max.): 2 rpm, travel distance W-axis: 800 mm, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, workpiece weight (max.): 25,000 kg, power: 37 kW (50.31 HP), REM CPAF 132 | CNC Table Boring & Milling Machine | Fanuc 31i-A Fully functional CNC horizontal boring mill — manufactured by REM Bacau (2016), revised and updated in 2022. Running under power and available for immediate inspection. MILLING & BORING HEAD: • Boring Spindle Diameter: 132 mm • Spindle Taper: ISO 50 • Speed Ranges: 2 • Spindle Speed: 0–2,500 rpm • Tool Clamping: Automatic • Main Motor Power (S1): 37 kW ROTARY TABLE: • Dimensions: 1,750 × 2,000 mm • Indexing: 360,000 × 0.001° • Indexing Accuracy: 6 arc seconds • Max. Hydrostatic Load: 25,000 kg AXIS TRAVELS: • X (Cross Slide): 2,500 mm • Y (Headstock): 1,600 mm • Z (Spindle): 800 mm • W (Column Back/Forth): 1,100 mm FEEDS: Gbodpfxsrwx U Ij Aayjt • X/Y/Z Work Feed: 2–10,000 mm/min • W Work Feed: 2–6,000 mm/min • B-Axis Feed: 0.025–3 rpm • Lead Screws: Ball-screw on all linear axes CNC CONTROL: Fanuc 31i-A Note: Requires new X-axis telescopic covers (priced accordingly). Machine is running under power — inspection welcomed anytime. Manufactured by REM Bacau – Romania. Export worldwide. Contact us for full specs and pricing.

Condition: used, Year of construction: 1988, Immediately available from prototype construction: Table drilling machine Pfeifer Year of manufacture 1988, in absolute top condition Type F 105 Spindle diameter 105 mm Milling spindle mounting SK 50 Drilling spindle mounting SK 40 Travel distances X/Y/Z 1000/1000/1500 mm Table 1000 x 850 mm Table load capacity 4 tons Spindle speeds 14 – 1500 rpm Spindle stroke 500 mm Rapid traverse 2500 mm/min Spindle drive 7.5 kW, total 12 kW Weight 9 tons Gsdozwug Depfx Aayobt Stop block Digital display Cabinet with many tools Price: Euro 8,500.00 plus VAT, ex works

Condition: used, table length 605 mm table width 250 mm weight ca. 40.0 kg Current list price: approx. 3.000 euros Special price available upon request Features Gedpjzzrf Esfx Aayjbt - Sturdy / solid cross table - From an ALZMETALL column drill press - Machined clamping surface: 605 x 250 mm - Maximum travel: 600 mm - Adjustment range: 0.05 mm

Condition: good (used), Stegherr 2 motors, each approximately 2.2 kW Connected load approximately 4.5 kW Compressed air 6 bar Voltage 380 V, 50 Hz Gedpozakw Eefx Aayebt

Condition: ready for operation (used), Year of construction: 1991, Hofmann TFS 1200 tilting table milling machine Year of manufacture: 1991 Machine no.: P127-91-194-695 Motor: 54.7 / 5.7 - 11 / 13.5 Tilting range: -5° to +45° Motor brake Motor: 2 speeds / pole-reversing 6 speed stages: 3 / 4 / 5 / 6 / 8 / 10,000 rpm Right-hand and left-hand rotation Table size: 2000 x 830 mm Milling arbor diameter: 30 mm Milling fence with fine adjustment Height adjustment: manual, with handwheel Tilting adjustment: manual, with handwheel Lateral sliding table for slot and tenon machining Gbodjzmcz Iopfx Aayot Feed device: 3-roller Elu, infinitely adjustable Dust extraction connection: D 2 x 120 mm Space requirement: approx. 2000 x 1600 x 1400 mm Weight: approx. 1000 kg

Condition: used, Year of construction: 2024, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pivoting range: 45 °, actuation type: manual, rotational speed (min.): 2,800 rpm, table width: 500 mm, table length: 700 mm, total length: 1,200 mm, total width: 900 mm, total height: 1,600 mm, overall weight: 95 kg, Equipment: documentation/manual, • The mortise milling cutter, type QNF, is used for horizontal and vertical mortising in wood, aluminum, and PVC. • The drive unit with the milling head runs in a guide arm, which is supported by four ball bearings. • Machine stand included. • Robust gray cast iron construction. • Hydraulic feed brake. Gbjdpfx Aajzvfw Rsyot • Pneumatic horizontal material clamping, on both sides of the milling area. • Lower milling cutter guard can be connected to an extraction system. • Carbide-tipped mortise milling cutter, 250 x 60 x 40 mm, Z=4+4.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, power: 7.35 kW (9.99 HP), input voltage: 400 V, input frequency: 50 Hz, spindle diameter: 30 mm, The Format4 profil 45 milling machine is just one of our best-selling machines and offers unique technical solutions. These include the electromechanical MULTI adjustment system for the 250 mm milling fence for parallel guidance and quick adjustment, with a digital display. The electric fine adjustment, which can be activated with the push of a button, provides tenth-of-a-millimeter accuracy, and the milling spindle quick-change system – tool-free changing in just 10 seconds – is just as distinctive a feature of the Format4 profil 45 as the electric milling spindle height adjustment. Maintenance-free and highly precise: the patented pivoting segment guide “Easy-Glide” with a 6-year warranty; 10-year warranty on the anodized aluminum sliding table with precision “X-Roll” guide system. Further technical data: Fence: 1100 mm Milling table opening: 320 mm Extension table: 1100 Milling fence for tool diameter max.: 250 mm Gbodszmh Nkspfx Aayjt Milling spindle quick-change system, standard Mortise and tenon table: 1300 mm Milling spindle control: “Power-Drive” The machine has the following special equipment: 008 10 HP (7.30 kW) S6/40% 010 Star-delta starter 012 Switching contact for controlling a dust extraction system 014 3-phase CEE coupling for additional equipment with delayed activation (absolutely necessary for operating a feed unit) 016 Stepless speed control 1500–10,000 rpm only with 7.30 kW (10 HP) S6/40% (!002) 103 Milling spindle diameter 30 mm, 140 mm usable height above table 121 Milling spindle locking from the outside 125 Safety rulers “Integral” 500 mm 128 Quick clamping for milling fence 164 Mortise and tenon ruler 1100 mm 212 Swiveling device for feed

Condition: ready for operation (used), Year of construction: 1960, Available immediately ex works: Table drilling machine, Scharmann Type FB 125 b Year of manufacture 1960 Complete retrofit in 2020 Spindle 125 mm Metric 80 / SK 50 mounting Quill stroke 800 mm Table 1600 x 1200 mm Table traverse 2000 mm Installation height, spindle / table 1400 mm Table longitudinal travel 2500 mm Spindle speeds 5 – 740 rpm, 7.5 – 1100 rpm With Wohlhaupter machining: 5 – 74 rpm Gsdpfx Aaezwvmreyobt 3-axis Heidenhain digital display Vertical head Large Wohlhaupter turning head Various other accessories Weight 21 tons Price: Euro 7,500.00 + VAT, ex works

Condition: used, Year of construction: 1973, spindle diameter 140 mm x-travel 2000 mm y-travel 2000 mm z-axis 1500 mm spindle stroke - max. 800 mm spindle taper ISO 50 table surface area 1800 x 1500 mm table load 15000 kg turning speed range 2,3 - 810 U/min total power requirement ca. 30 kW weight of the machine ca. 31000 kg dimensions of the machine ca. 7300 x 5600 x 4000 mm Equipment: - Faceplate with NC facing slide and NC rotary table - Heidenhain digital readout - Various tool holders - Various clamping devices Gedpfx Aasy Umc Uoyobt

Condition: good (used), Year of construction: 1960, Make: Bäuerle, including integral fence and HolzHer power feed Model: SFM 2 Tilting range: 0 to 45° Brake Motor with 2 speeds/pole-changeable 6 speed settings: 1,800 - 4,500 - 5,600 - 6,000 - 9,000 - 12,000 rpm Forward/reverse rotation Table size: 1150 x 1200 mm Gbsdpfxjy E T Ufe Aayjt Spindle diameter: 30 mm Milling fence Required space approx. 1200 x 1200 x 1300 mm Weight approx. 1000 kg Location: 54634 Bitburg, loaded free on truck, unpacked Delivery in current condition as inspected, function-tested without overhaul, without warranty or guarantee

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Gbodpfx Aajzt Ai Esyot Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: used, Year of construction: 1994, spindle diameter 125 mm x-travel 2000 mm y-travel 1600 mm Gsdjztfwxspfx Aayebt Control Siemens 840 C z-travel 1400 mm 600 mm ja total power requirement 40 kW weight of the machine ca. 27 t

Condition: ready for operation (used), Scharmann - WB 80 / Heidenhain digital display ND 780 -Travel ranges X/Y/Z 1300x1200x1200mm -Heidenhain digital display -Rotary table - 1200x1200mm -Table load max. 5 tons -Spindle mount MK5 -Automatic feeds 0.053-6.35mm -Rapid traverses -Spindle speeds 24-2880 rpm -Coolant system -Various accessories / tool holders etc. Errors and omissions excepted. Gedpfx Aeztyi Njayobt

Condition: refurbished (used), Year of construction: 2007, VIDEOS AVAILABLE ON REQUEST UNION CBFK 130/2 CNC Table Type Horizontal Boring & Milling Machine Manufacturer: UNION Gera (VEB Werkzeugmaschinenfabrik UNION Gera) Model: CBFK 130/2 Control: Heidenhain CNC Machine type: CNC Table Type Horizontal Boring & Milling Machine Travels X-axis: 3,000 mm Y-axis: 1,600 mm Z-axis: 1,275 mm W-axis (spindle quill): 400 mm B-axis (rotary table): 360° Table Table size: 1,600 × 2,000 mm Maximum workpiece weight: 7,000 kg Main Drive Main spindle motor: 32.4 kW Gedpfx Aezqbg Djaysbt Electrical Data Connected load: 80 kW Supply voltage: 380 V Frequency: 50 Hz Control voltage: 220/24 V Auxiliary voltage: 220/15 V Rated machine current: 150 A Recommended fuse: 200 A Operating temperature: 15–35 °C Machine Weight Approximate machine weight: 28.3 tonnes Year Originally manufactured: (not shown on plate) General overhaul: 2007 Machine Identification Model: CBFK 130/2 Serial number: 12266 Operating Hours (Heidenhain) Control ON: 112,694 h Machine ON: 100,869 h Program running time: 22,209 h Spindle running time: 18,280 h

Condition: good (used), Year of construction: 1991, Table saw Manufacturer: SCM Type: T 130 Year of manufacture: 1991 Gedpfszhlrrox Aayobt Table: 1200 x 730 mm Power: 4 kW Spindle: 30 mm Reversible rotation Including feed mechanism

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 9,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, The machine is in good technical condition, including a rotary table S 35, table dimensions 2850 x 3150 mm (photo in the attachment), 2 clamping plates, a HUI 50 swivel head, a tool magazine for 80 tools, and a Siemens 840 D control system. WRD 150 CNC Year of manufacture: 2008 Control system: SINUMERIK 840 D Gbjdpfx Aoy U Ndzjayot X-axis: 9000 mm Y-axis: 4000 mm Z-axis: 1000 mm W-axis: 800 mm Power: 60 kW Tool magazine capacity: 80 tools Clamping plates: 2, 6000x2000 mm Swivel head: HUI 50

Condition: good (used), functionality: fully functional, power: 5.5 kW (7.48 HP), Table milling machine KAMRO, spindle D=30mm, Gsdpfxeyxwwkj Aayobt

Condition: used, Haas Mill, New 2018, Table 12 x 36", 10 Station ATC, BT 40, 6000RPM Spindle, USB, Coolant. Godpfx Aszvrf Ueaysbt

Condition: used, Haas Mini Mill with 4th Axis 5C Collet System (HA5C P1), 10 Station ATC, 6000RPM, Table 12 x 28", Coolant Gbedezvrgxepfx Aayet