Used Multi Spindel for sale (4,714)

Condition: used, Year of construction: 2023, Series 2821, machine no. 70.278, max. load capacity 2,000 kg, hydraulic lift mast, max. lift height 4,000 mm, drive power 2x 4 kW, 48 V battery, multidirectional steering system, operating terminal, type HIT-3, operator safety cabin, charger, operating hours: 197 ++This item is part of an online auction++ Nwodpfoylllhsx Aacec

Condition: used, axle configuration: 3 axles, first registration: 06/2019, Equipment: ABS, 15 units available, galvanized SAF axles 2 lift axles 1x20 rear flush 2x20 1x30 rear flush Nwodpfxevvfwbj Aacoc 1x40 rear flush 1x45 rear flush ADR Water tank Toolbox LED lights All offers are subject to change, non-binding, and without warranty. Errors, changes, and prior sale excepted.

Condition: excellent (used), Sat B2599A Drawer oven 130 °C If very different products or product parts with equally different annealing times are to be treated independently of each other in the smallest possible space, drawer ovens are the smartest ergonomic solution. Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven Outer dimensions of the furnace width with control cabinet: 2500 mm depth: 1700 mm Height: 2250 mm Usable volume in each drawer width: 1200 mm depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, when stabilized : +/-3°C at 80°C Frame : The basic structure consists of a non-alloyed steel beam structure, on which the external lighting made of non-alloyed steel is painted in RAL 1013 (pearl white). The furnace inner casing is made of aluminized steel sheet. Insulation between the two furnace housings (inner/outer housing) is provided by 120 mm rock wool. Floor: Same as the furnace walls, with 120 mm thick thermal insulation. Height (from factory floor to I. drawer): 800 mm +/100 mm adjustable by the furnace feet. Openings: 3 drawers, height 250 mm, for a usable load of 120 mm height. Maintenance doors : 2-leaf maintenance door on the back of the oven. Secured by screws. This door allows complete access to the inside of the furnace. Parts handling: The handling of the parts is ensured by 3 drawers (one above the other). Height between each drawer : 250 mm Usable height per drawer : 170 mm, with almost 10 mm reserve. The drawers are smooth and equipped with a locking piece at the bottom of the drawer to reduce heat loss when opening. Each drawer has a useful load capacity of 120 Kg with load distribution over the entire surface. Load peaks up to 240 Kg can be supported. The drawer seals are made of silicone. The locks of each drawer are ensured by electromagnets and controlled by the Siemens system. Timing of the minimum preheating time with a timer per drawer (located in the electrical cabinet). Timing of the maximum preheating time with one timer per drawer (located in the electrical cabinet). One temperature indicator is provided per drawer. These indicators will be located on the front of the furnace, to the left of the drawers. Financing through our bank is also possible. komplett-konzept.leasingo.de More industrial furnaces in other sizes - new and used - you can find in our store! International shipping costs on request! Nwjdoim Ik Sepfx Aacoc

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3076x1250x1600 mm Weight 2000 kg Total power requirement 25,32 kw Nwodpfx Aoyk Ic Toacjc

Condition: new, Year of construction: 2026, cutting width 450 mm Weight 5500 kg Nwsdsyk Icgspfx Aacec work height max. 850 mm

Condition: new, Year of construction: 2026, cutting width 450 mm voltage 400 V Nedpfxsyk H Uno Aacswc Weight 5500 kg

Condition: excellent (used), Year of construction: 2009, operating hours: 100 h, functionality: fully functional, machine/vehicle number: SKU 102781, overall weight: 1,300 kg, power: 4 kW (5.44 HP), space requirement width: 1,350 mm, space requirement length: 1,520 mm, space requirement height: 1,400 mm, Equipment: rotational speed infinitely variable, The special design of the Multi Grind makes it possible to combine the functions of cylindrical, surface, and tool grinding in a single machine. During external cylindrical grinding, the workpiece can be clamped on one side or supported between centers in the robust tailstock. An internal grinding attachment can also be mounted on the headstock, and even light surface grinding tasks are possible with this model. In tool grinding operations, the Multi Grind allows for precise sharpening of the cutting edges on a wide variety of tools – making it particularly versatile in its application. - External and internal cylindrical grinding - Surface grinding - Tool grinding - Hydraulic table feed Nwodpfexqgi Djx Aacsc - Extensive accessories

Condition: excellent (used), CATALOG NUMBER 7903 Technical data: - track width: 450mm - shaft width: 420mm - installed saw blade: 400mm - max saw blade diameter: 450mm - saw blade bore diameter: 80mm - max cutting height with 450mm blade: 160mm - table dimensions: 2230x860mm – from above: - kickbacks/stoppers - sliding shaft - kickbacks - smooth sliding roller - hold-down - shaft with saws - hold-down - 2 sliding, hold-down shafts – from below: - roller in front of the table - guide - stoppers - track - central track lubrication - manual lifting of saw shaft - electric body lifting: 0.75kW - stepless feed speed adjustment - extraction port diameter: 280mm - main motor: 75kW - overall dimensions (L/W/H): 2360x200x1960mm - weight: 3250kg ADVANTAGES – Czech production – used multi-blade saw – upper control panel – DTR (technical documentation) – very good condition Nwsdpfxjynkvdo Aacoc Net price: 69,900 PLN Net price: 16,650 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (in case of larger currency fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7904 Technical data: - Max cutting height: 160mm - Max element width: 700mm - Working width of the shaft with saws: 600mm - Shaft diameter: 70mm - Max saw blade diameter: 450mm - Top: - Pawls - 2 geared feed rollers - Pressure with metal slip roller - Bottom: Njdpfx Aaeynkt Nocjwc - Slip roller - Pawls - Geared feed roller - Shaft with saws - Smooth feed roller - Metal slip roller - Infinitely variable feed speed control - Feed motor: 1.5kW - Main motor: 55kW - Overall dimensions L/W/H: 1700x1400x1900mm - Weight: approx. 2740kg ADVANTAGES – Made in Poland – Robust construction – Used machine, in very good condition Net price: 56,900 PLN Net price: 13,550 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of larger exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7906 Technical data: - Track width: 400 mm - Working width of shaft: 400 mm - Max. blade diameter: 450 mm - Blade bore diameter: 70 mm - Max. cutting height for 300 mm blade: 95 mm - Table width with extension: 720 mm - Table length: 1900 mm From above: - Kickback pawls/retractors: 2 rows - Sliding metal pressure roller - Kickback pawls/retractors - Sliding metal pressure roller - Shaft with saw blades - Smooth sliding metal roller From below: - Guide bar - Kickback pawls - Track - Electric body lifting - Central track lubrication - 2 feed speed modes + stepless adjustment - Feed motor: 0.9 kW - Main motor: 30 kW - Extraction port diameter: 260 mm - Infeed and outfeed roller table: 2850 mm + 2150 mm - Roller width: 360 mm - Overall dimensions (L/W/H): 2350 x 1800 x 2200 mm Nwjdpfx Aoynknyeacec - Weight: approx. 2000 kg ADVANTAGES – Italian production – Infeed and outfeed roller tables – New track and sliding pads – Very good condition – Used multi-blade saw Net price: 55,900 PLN Net price: 13,300 EUR based on 4.2 EUR/PLN exchange rate (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), functionality: fully functional, mileage: 584,102 km, power: 331 kW (450.03 HP), first registration: 12/2021, fuel type: diesel, empty load weight: 10,500 kg, maximum load weight: 15,500 kg, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, Year of construction: 2021, Equipment: air conditioning, retarder, Scania R450/BDF/Steerable Lift Axle/ACC/Retarder/2x 1000L Tanks/Highline/Multi • Manufacturer: Scania • Model: R450 • Mileage: 584,102 km • First registration: 12/2021 • Power: 331 kW/450 hp • Axle configuration: 6x2 • Trailer coupling • Retarder • Air conditioning • Navigation system • Long-distance driver cab • 2 beds • Refrigerator box • Roof hatch • Liftable steering axle • Transmission: Automatic • Suspension: Air/Air • Unladen weight: 10,500 kg • Payload: 15,500 kg • Perm. total weight: 26,000 kg • Euro 6 • German vehicle • German documentation • Immediately operational • This offer is non-binding and subject to change. - Subject to prior sale - Errors and/or typographical mistakes excepted. - Sale according to our general terms and conditions. Nwodpfx Aasx Tuucocjc

Condition: new, mileage: 488 km, power: 390 kW (530.25 HP), first registration: 03/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 6,000 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, total length: 11,320 mm, total width: 2,550 mm, total height: 3,890 mm, Year of construction: 2024, Equipment: AdBlue, Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Maximum front axle load: 8,000 kg Maximum rear axle load: 11,500 kg Weights Curb weight: 10,858 kg Payload: 10,142 kg gross vehicle weight (GVW): 21,000 kg Functionality Bodywork brand: Berg Oprijwagens Machine Transporter / Car Transporter Maintenance APK (general technical inspection): New TÜV upon delivery Condition General condition: very good Technical condition: very good Optical condition: very good Damages: none = Company Information = Nidro Cars Holland is located in the centre of the country and is your reliable partner for the purchase of your car, van, or truck. The stated price is the 'internet take-away price.' Nedpfx Aaexlttlecswc For questions or to arrange a test drive, please contact us: CHECK OUT OUR FULL STOCK AT All types of trade are possible with us! (Our advertisements are compiled with great care, but no rights can be derived from the content.)

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 68-3-2329, spindle speed (max.): 855 rpm, spindle speed (min.): 137 rpm, turning length: 225 mm, disc diameter: 317 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obliges the buyer to collect within the timeframe 08.04.26 to 16.04.26. TECHNICAL DETAILS Spindle speed range: 137 – 855 rpm Maximum material feed: 260 mm Nsdpfx Aaoyk A Htocewc Maximum turning length: 155/225 mm Drive pulley diameter: 317 mm Drive pulley width: 170 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 7000 x 2000 x 2500 mm Machine weight: 18 t Operating voltage: 380V Frequency: 50 Hz Rated current: 120 A EQUIPMENT Configured for 6 spindles

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 67-3-2142, spindle speed (max.): 855 rpm, spindle speed (min.): 137 rpm, turning length: 225 mm, overall weight: 18,000 kg, disc diameter: 317 mm, No minimum price – sale guaranteed to the highest bidder! Placing a bid commits you to collect within the period from 08.04.26 to 16.04.26. TECHNICAL DETAILS Spindle speed range: 137 - 855 rpm Maximum material feed: 260 mm Maximum turning length: 155/225 mm Drive pulley diameter: 317 mm Drive pulley width: 170 mm MACHINE DETAILS Nwsdpfxeyk Alps Aacjc Operating voltage: 380V Frequency: 50 Hz Rated current: 120 A Dimensions & Weight Dimensions (L x W x H): 7000 x 2000 x 2500 mm Machine weight: 18 t EQUIPMENT Set up for 6 spindles

Condition: good (used), Year of construction: 1990, Ref. -No.: 10542 Manufacturer: GILDEMEISTER Nsdpfx Aaexmd Txscewc Type: AS - 16 Year of construction: 1990 Max. Rod diameter: 16 mm Number of spindles: 6 Pcs Guide rod length: 3,3 m Further information: The machine can be viewed under power by arrangement.

Condition: excellent (used), Limitech Multi function mixer. In excellent condition, perfect for baby food, ready meals, mayonnaise, mashed potato, processed cheese etc. Full spec to follow. Njdjuyvfzopfx Aacowc

Condition: excellent (used), Catalogue number: 7548 TECHNICAL DATA Track width: 250 mm Shaft width: 250 mm Max saw blade diameter: 350 mm Saw blade bore diameter: 80 mm Max cutting height: 120 mm Table width with gap: 700 mm Table length: 1790 mm *From above: Ratcheting pawls Pressure roller, smooth Ratcheting pawls Pressure roller, smooth Shaft with sawblades Smooth pressure rollers: 2 pcs From below: Guide Smooth sliding roller Ratcheting pawls Track Central lubrication Feed motor: 1.1 kW Main motor: 30 kW Electric body lifting Manual saw shaft lifting Nwedpfx Aajyaq Hgjcjc Extraction nozzle diameter: 160 mm Overall dimensions (L/W/H): 2250x1700x2000 mm Weight approx.: 3000 kg – German-made – Electric lifting of body and saw shaft – Smooth feed speed adjustment – Used multi-blade saw, in very good condition Net price: PLN 68,900 Net price: EUR 16,400 at the rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number: 7547 TECHNICAL DATA Track width: 300 mm Roll working width: 290 mm Max. disc diameter: 300 mm Disc bore diameter: 70 mm Max. cutting height: 100 mm Table width with extension: 680 mm Table length: 1630 mm *From above: 2 rows of pawls Metal pressure slip roller Roller with saws 2 smooth metal pressure slip rollers From below: Guide rail Pawls Track Electric height adjustment of main body (up/down) Central track lubrication 2 feed speed modes Feed motor: 1.1 kW Main motor: 22 kW Extraction nozzle diameter: 130 mm Overall dimensions (L/W/H): 2000x1400x1700 mm Weight approx.: 900 kg – Italian manufacture – Very good condition – Used multi-blade saw Net price: 34,900 PLN Nwodpfox Uz T Usx Aacec Net price: 8,300 EUR (based on 4.2 EUR rate) (Prices may vary according to rate fluctuations)

Condition: excellent (used), Catalogue number: 7545 TECHNICAL DATA Track width: 250mm Shaft width: 220mm Max blade diameter: 300mm Blade bore diameter: 60mm Cutting height: 100mm Table width: 650mm Table length: 1460mm – Top: 2 rows of pawls Smooth feed roller Blade shaft Smooth feed roller – Bottom: Guide rail Pawls Track 2 feed speed settings + stepless adjustment Central lubrication Feed motor: 1.2kW Main motor: 21kW Extraction outlet diameter: 180mm Overall dimensions (L/W/H): 1700x1450x1500mm Weight: approx. 1800kg – Made in Italy – DTR technical documentation – Robust machine – Used multi-blade saw, in very good condition Net price: 25,900 PLN Njdpex Uz Tuofx Aacewc Net price: 6,160 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)

Condition: excellent (used), Multiple-shaft circular saw (gang saw) by FOD BYDGOSZCZ* DPPA III 50E 620/120 Nsdpfx Asymxdmjacjwc Catalogue Number: 7407 TECHNICAL SPECIFICATIONS: - Maximum cutting height: 120 mm - Maximum workpiece width: 700 mm - Working width of the shaft with saw blades: 620 mm - Maximum saw blade diameter: 450 mm - Saw blade bore diameter: 90 mm Upper side: - Kickback pawls - 2 toothed driven rollers Lower side: - Kickback pawls - 2 smooth driven rollers - Saw blade shaft - Smooth driven roller - 2 feed speed options - Feed motor: 4.4 kW - Main motor: 30 kW - Machine dimensions (LxWxH): 2370x1400x1800 mm - Weight: approx. 3000 kg – Polish production – Used machine, very good condition Net price: 38,900 PLN Net price: 9,260 EUR (based on an exchange rate of 4.2 EUR) (Prices may change depending on currency fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized dealer for the manufacturer. All trademarks and names are used purely for informational purposes to identify the product. We only resell goods that have previously been placed on the market by the manufacturer. We have no business association with the manufacturer.

Condition: used, machine/vehicle number: XLDTXC34300056127, axle configuration: 3 axles, first registration: 08/2007, total width: 2,470 mm, suspension: air, tire size: 385/55, tire condition: 30 %, color: other, Year of construction: 2007, = Additional options and accessories = - Air Suspension - Drum brakes - Lift Axle = More information = Axle configuration Tyre size: 385/55 Make axles: BPW Nwjdpjyhb Rfjfx Aacsc Tyre profile: 30% Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg; Brakes: drum brakes; Suspension: air suspension Weights Empty weight: 5.400 kg Carrying capacity: 37.600 kg GVW: 43.000 kg Identification Registration number: OJ-70-XK

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 120 mm, cutting width (max.): 300 mm, saw blade diameter: 350 mm, height adjustment type: mechanical, saw blade bore: 70 mm, actuation type: electric, - Operating manual, DTR - Italian production TECHNICAL SPECIFICATIONS: - Track width: 300 mm - Cutting height: 120 mm - Max. blade diameter: 350 mm Nedoym Ag Sspfx Aacewc - Motor power: 30 kW - Table width: 750 mm - Min. workpiece length: 600 mm - Feed speed adjustable via gearmotor - Three rows of anti-kickback pawls - Possibility to mount a board – shoe - Spindle diameter: 50 mm - Sleeve diameter: 70 mm - Sleeve equipped with spacers - Automatic central lubrication - Four upper feed rollers - Extraction port diameter: 200 mm - Machine dimensions (L/W/H): 155 / 165 / 160 cm - Weight: 1800 kg

Condition: used, Year of construction: 2003, Mazak Integrex E-410H Multi-Tasking Lathe with Mazatrol 640M Pro Control, Serial No. 164385 (2003). Country of Origin: Japan Nedpfex T Df Dsx Aacowc Please note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described. Please Note: This lot is located in Birmingham, UK. A charge of £4,500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: like new (used), Year of construction: 2002, functionality: fully functional, Manufacturer: NAVA Model: 2MI1600DE/SE Year: 1998 Condition: Used Stock number: 0367 Pressing force: 1,600 tons Number of pressing points: 4 Ram stroke: 1,200 mm Nwedpfxjx R U Nue Aacoc Upper punch stroke: 1,500 mm Ram size: 4,500 x 2,500 mm Table size: 4,500 x 2,500 mm Blankholder cushion – total force: 400 tons Lower blankholder cushion stroke: 500 mm Withdrawable carriage: Present, front side

Year of construction: 2002, condition: used,