Used Work Spindle for sale (52,782)

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 150 kg, empty load weight: 319 kg, working height: 4,200 mm, TECHNICAL DETAILS Gbedpfs Afm I Hex Aanow Working height: 4.20 m Platform height: 2.20 m Load capacity: max. 150 kg MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1.28 x 0.74 x 1.95 m Platform dimensions: 0.85 x 0.64 m Self-weight: 319 kg EQUIPMENT Manually adjustable work platform Non-electric lifting mechanism without batteries and hydraulics

Condition: used, Year of construction: 2024, operating hours: 20 h, empty load weight: 2,800 kg, arm reach: 3,450 mm, working height: 9,600 mm, TECHNICAL DETAILS Working height: 9.60 m Platform height: 7.60 m Lateral reach: 3.45 m Load capacity: max. 230 kg MACHINE DETAILS Drive type: Electric Dimensions of the aluminum platform: 1.20 × 0.87 m Turning radius (inside/outside): 0 / 1.21 m Turret rotation: ±180° Climbing ability: max. 19° (35 %) Permissible working inclination X-axis: max. 3° (5.25 %) Permissible working inclination Y-axis with automatic stabilization: max. 10° (18 %) Travel speed in retracted state: max. 2.8 km/h Travel speed in extended state: max. 1 km/h Weight: 2,800 kg Operating hours: 20 h Gjdpfj Ahm N Iox Aansbw EQUIPMENT Track chassis with white tracks Two-person work platform Additional single-person work platform with a load capacity of 120 kg Load hook

Condition: used, Year of construction: 2014, operating hours: 1,790 h, construction height: 1,950 mm, working height: 15,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working height: 15.00 m Platform height: 13.00 m Lateral reach: max. 7.40 m at 120 kg Load capacity: max. 200 kg (depending on the working area) MACHINE DETAILS Dimensions & Weight Weight: 1,950 kg Overall height: 1.95 m Operating hours: 1,790 h Gbodo Afmwuepfx Aanow Drive type: Gasoline / Electric

Condition: used, Year of construction: 2024, operating hours: 275 h, load capacity: 230 kg, construction height: 1,990 mm, arm reach: 6,500 mm, working height: 14,500 mm, TECHNICAL DETAILS Working height: 14.50 m Platform height: 12.50 m Maximum lateral reach: 6.50 m Maximum load capacity: 230 kg MACHINE DETAILS Overall height according to the machine base: 1.99 m Operating hours: 275 h EQUIPMENT: Dual speed Gbsdpfxe Afm Efe Aanjw Hydraulic basket rotation Outrigger pads Electric emergency lowering system (12 V DC) White chains and special paint finish

Condition: excellent (used), Year of construction: 2010, operating hours: 9,416 h, functionality: fully functional, feed length X-axis: 535 mm, feed rate Z-axis: 3,845 m/min, turning diameter over cross slide: 630 mm, turning diameter: 950 mm, turning diameter over top slide: 630 mm, spindle bore: 254 mm, spindle speed (max.): 630 rpm, total height: 1,850 mm, total width: 2,105 mm, Hankook Protec 9NC Hollow Spindle Oil Country Lathe Gbjdpoz S Nc Uefx Aanjw Model: Protec 9NC Control: Fanuc 21i-TB Year: 2010 Spindle Bore: 254mm Capacity: 950 x 4000mm Swing Over Cross Slide: 630mm Spindle Speeds: To 630 RPM (2 Ranges) Main Motor: 37 KW Machine With: Double 4 Jaw Manual Chucks (front or rear) Duplomatic 8 Station Turret 2 x Fixed Steadies

Condition: excellent (used), Industrial MXS5115A vertical spindle moulder / woodworking router table, suitable for professional woodworking shops. Ideal for profiling, grooving, edge shaping and custom milling operations on solid wood and wood-based panels. Specifications • Model: MXS5115A • Table size: 650 × 580 mm • Maximum working thickness: 120 mm • Spindle speed: 18,000 rpm • Collet sizes: 6.3 mm / 12.7 mm • Motor power: 2.2 kW • Power supply: 380 V, 3-phase Features • Heavy-duty cast iron work table • High-speed spindle for precise routing and profiling • Industrial construction • Suitable for furniture production, cabinet making and joinery • Easy adjustment and operation Condition • Good working condition. • Ready for use. • Inspection and testing are welcome. Gbodpfxezmukuo Aanow

Condition: good (used), Year of construction: 2004, functionality: fully functional, Manufacturer INDEX-Werke Model series MS52C with IEMCA bar loader Machine type CNC multi-spindle turning machine with bar loading system Capacity class 52 mm bar diameter Working spindles 6 independently driven spindles Control system Siemens SINUMERIK on INDEX C200 control panel; verify the exact software version on site NC system Two NCU units are documented in the provided report Year of manufacture 2004 according to the provided machine report Feature Specification Working spindles 6; six positions are documented in the machine's process display Maximum bar diameter 52 mm as a typical reference value for the model series Maximum spindle speed 5,000 min⁻¹ as a typical reference value for the model series Tool holder Up to 12, depending on the model series; the actual configuration must be verified on site Driven machining Two driven machining units according to the provided configuration information Rear machining Two back drilling stations documented, one of which is driven Axis concept Multiple NC-controlled X and Z axes; diagnostic and correction displays are documented Tool monitoring ARTIS tool and process monitoring system is available Machining system Feature Specification Working spindles 6; six positions are documented in the machine's process display Maximum bar diameter 52 mm as a typical reference value for the model series Maximum spindle speed 5,000 min⁻¹ as a typical reference value for the model series Tool holder Up to 12, depending on the model series; the actual configuration must be verified on site Driven machining Two driven machining units according to the provided configuration information Rear machining Two back drilling stations documented, one of which is driven Axis concept Multiple NC-controlled X and Z axes; diagnostic and correction displays are documented Tool monitoring ARTIS tool and process monitoring system is available The interior shots show a complete multi-spindle machining arrangement with several independent slides and tool stations. The actual scope of supply of tool holders, clamping devices and special tools must be definitively documented during the inspection. Feature Bar loading system Chip removal Part handling Process monitoring Fire extinguishing system Specification IEMCA bundle and bar loader; confirm type, length range and diameter range on site KNOLL chip conveyor High-pressure pump up to 80 bar according to the provided equipment list Visible part or discharge guide; verify the exact function during production Gedpfe Aiimtsx Aanobw ARTIS tool breakage and process monitoring system; integrated Kraft and Bauer CO₂ extinguishing system

Condition: used, total length: 1,700 mm, total width: 1,000 mm, total height: 2,100 mm, Year of manufacture: 2001 Colour: Grey - Details: - └ Description: Readout positioning does not work properly. Price AS-IS - Year: 2001 - CE marking present: Yes - Serial number: AB/143039 - Spindle diameter [mm]: 40 - Table length [mm]: 1195 - Table width [mm]: 350 - Feeding device present: Yes - Guide present: Yes - Tool key included: Yes Gbedpfxsymlahe Aansw - Spindle speed: Manual - Voltage [V]: 400 - Current consumption [A]: 12 - Fuse [A]: 20 - Transport dimensions: 1700mm x 1000mm x 2100mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2012, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Gbedpfx Aaj Ah Nc Uonew Year of manuf. : 2012 Control : Siemens 840 D Pre-processing Manufacturer:Index Type:A 200 Year of construction:2012 Control system:Siemens 840 D Number of slides:5 pieces Bar feeder:IEMCA Master 880 Chip disposal:Chip conveyor Processing 1 (OP10): Manufacturer:Index Type:MS 40 C Year of construction:2012 Control system:Siemens 840 D Number of spindles:6 pieces Parts handling:Streuli robot Chip disposal:Chip conveyor Coolant supply:IKZ system Processing 2 (OP20): Manufacturer:Index Type:MS 40 C Year of construction:2012 Control system:Siemens 840 D Number of spindles:6 pieces Parts handling:Streuli robot Chip disposal:Chip conveyor Coolant supply:IKZ system Linkage: Robots:Kuka Parts transport:Conveyor belts

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation Gsdpfx Aaozt Ai Esnsbw We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: good (used), Year of construction: 1977, functionality: fully functional, - 6 spindles - max. bar diameter: 32.0 mm - guide tubes - chip flushing system - accessories: cams + gears - SEMA bar feeder bundle (1989) Gbodpfjz Iz D Iox Aansw

Condition: excellent (used), Catalog number 7784 TECHNICAL DATA - Spindle diameter: 30mm - Spindle working height: 150mm - Interchangeable spindle - Spindle locking Gedozwwd Eepfx Aansbw - Adjustable up/down + angle - Original cast iron guide with full adjustment - 4 types of rotation speeds + right/left: 3000/5000/6000/10000 rpm - Table dimensions: 1120x800mm - Motor: 3.7kW - Dimensions (L/W/H): 1100x1400x1160mm - Weight: 775kg ADVANTAGES - Made in Germany - Used milling machine - Very good condition Net price: 6900 PLN Net price: 1605 EUR Net price calculated at an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: good (used), Code: 0521 Brand: COLOMBO Model: AM 33 A/F Automatic working centre for wooden window and door frames Technical specifications: Tenoning side: Tenoning carriage 1100 x 1100 mm Feed speed adjustment Rotating chip guard Extendable aluminium guide with millimetre scale and reference stops Blade diameter 400 mm Hole 30 Blade motor power 3 Kw Electronic horizontal movement Pneumatic vertical movement Suction inlet diameter 80 mm Counter-supported tenoning spindle Useful length 600 mm Spindle diameter 50 mm Max tool diameter 320 mm Spindle rotation speed 3200 rpm Motor power 7,5 Kw Electronic vertical positioning with continuous axis and recirculating ball screw N° 2 suction inlets diameter 1500 mm Profiling side: Fittings spindle Spindle diameter 50 mm Useful spindle length 160 mm Max tool diameter 220 mm Motor power 3 Kw Suction port diameter 100 mm 1° counter-supported profiling spindle: Useful length 600 mm Spindle diameter 50 mm Max tool diameter 220 mm Motor power 7,5 Kw Electronic vertical positioning Electronic horizontal positioning N° 2 suction inlets diameter 150 mm Godpfx As Ai Tb Tjansbw 2° counter-supported profiling spindle: Useful length 600 mm Spindle diameter 50 mm Max. tool diameter 220 mm Motor power 7,5 Kw Electronic vertical positioning Electronic horizontal positioning N° 2 suction inlets diameter 150 mm Strip recovery unit: Blade diameter 200 mm Shaft diameter 35 mm Motor power 2,2 Kw Pneumatic vertical positioning Manual horizontal positioning Suction inlet diameter 80 m Profiling table Rubber-tyred roller feed system with electric vertical positioning Safety cabin for the working units both for the tenoning side and the profiling side Electronic control unit: Freely programmable via an alphanumeric keypad, with the option to enter individual programmes, complete work cycles and entire job orders – Electronic tool positioning control with continuous axis, oup to 99 storable positions per axis Vivaldi tool unit Compressed air 7–8 bar Weight 4200 kg

Condition: like new (used), Year of construction: 2023, Used Machine Year of manufacture: 2023 Gbjdpfx Aaozk Nn Ajnew Condition: like new; machine has never been used Features and technical specifications: - Spindle speeds: 3,500 / 6,000 / 8,000 / 10,000 rpm - Milling spindle tilt: 0 to -45° - Effective spindle length: 125 mm - Spindle arbor diameter: 30 mm - Speed display: LED display on the front of the machine - Max. tool diameter (standard): 240 mm - Max. lowerable tool diameter: 230 mm - Max. tool diameter for profile milling: 240 mm - Max. tool diameter for tenon milling: 320 mm - Work table length: 1,200 mm - Work table width: 530 mm - Table height: 900 mm - Slide length: 1,200 mm - Slide width: 360 mm - Slide height: 142 mm - Exhaust port diameter: 2 × 120 mm - Drive motor power: 5.0 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Dimensions: 1,200 × 2,000 mm Weight: 510 kg Availability: available shortly Storage location: 63934 Röllbach

Condition: used, Year of construction: 2013, functionality: fully functional, Servo spindle press with screw station Rittal Top Therm: SK3304500 Gedowu Adbepfx Aanobw Specification: V: 3x380-400 Watt: 25,900 Hz: 50 The Tool Temp TT-380 servo spindle press with screw station is an innovative and precise machine, ideally suited for demanding manufacturing processes. It stands out for its high accuracy and efficiency, making it a reliable solution for fast and precise screw connections. The integrated screw station enables efficient automation of the screwing process, while the servo technology ensures consistent force and motion control.

Condition: good (used), Year of construction: 2015, Ref. -No.: 10421 Manufacturer: SCHüTTE Type: SF 26 Year of construction: 2015 Type of control: Digital Gsdpfx Asy Ed Atoansbw Control: Digital Storage location: Halberstadt Country of origin: Germany Serial no.: 3 Power consumption: 35 kW Weight Of The Machine Ca.: 6,6 t

Condition: good (used), Year of construction: 2001, functionality: fully functional, 6 spindles Parts collection device KADIGO tool monitoring system with IEMCA PRA 52/42 F bar feeder (4m bar length) Godpfxjzdtn To Aanebw Accessories

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes for routering, boring, cutting and EDGE BANDING Gantry-drive (axe X) machine Numerical Control PowerControl PC86 PowerTouch - Software WoodWOP - TAPIO READY Working table with pods and rails - Support rails (No.) 10 - SPEED PACK Automatic deplacement by CNC (X axis) of the Supports rails Automatic deplacement by CNC (Y axis) of the vacuum pods/cups LED system (on the rails) for the vacuum pods positioning Automatic Tools Changing System - Tools storage plate (No. of folds-positions) 18 Gedpfj Ai Sf Uox Aanobw Max. useful working area (X - Y - Z) mm 6175 x 1550 x 300 Max. useful working area (X - Y - Z) in edge banding (mm) 6000 x 1550 x 60 Vacuum pump (capacity m3/h) 290 Motorized carpet to evacuate chips and wastes WORKING GROUPS (TOP): N° 21 Independent vertical boring spindles (High-Speed) N° 4 Independent horizontal boring spindles (Crosshead) N° 1 Circular Saw (tiltable 0°- 90°) diam. (mm) 200 N° 1 Vertical electro-spindle (KW 15) Edge Banding unit (always ready on board) POWER EDGE. Glue Unit (Hot Melt + Quick Melt Unit) Edges (tape) thickness in rolls (min/max) mm 0,4 / 3 Edge coils supporting unit (No. of reels) 2 Pre-End cutting (pre-snipping) Unit Aggregate Circular saw / Aggregate Top & Bottom Flush-Trimming/Scraping Unit

Condition: new, Year of construction: 2026, functionality: fully functional, Table saw TF 190 E (400 V) – NEW *Tabletop has minor scratches* Fence with finely adjustable aluminum stops, quick and easy speed change, display of the set speed via LED lights, large work surface with a torsion-resistant cast iron table, selector switch for right/left rotation of the milling spindle, milling unit made of cast iron, workpiece holder for precise workpiece guidance Dust extraction port ø 100 mm Work table 690 x 480 x 900 mm, 400 volts, drive motor 2.2 kW, milling spindle useful length 100 mm, Gbodeyxqhpjpfx Aanjw spindle arbor ø 30 mm, milling tool ø max. 200 mm, adjustable, milling spindle stroke 100 mm, spindle speeds 1800/3000/6000/9000 min⁻¹, machine size 730 x 520 x 680 mm, weight 155 kg NEW PRICE MSRP: €1,688.00 Transport possible for an additional charge!

Condition: good (used), Year of construction: 2007, Details will be provided via email upon request. The following repairs were carried out on this machine by Index:  New collet chuck  New clamping cylinder Gsdpfx Ao Af Uzzoanobw  New part removal system  New PCU (presumably referring to a Programmable Control Unit)  New display screen  New synchronization spindle

Condition: used, Year of construction: 2006, spindle bore: 65 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, NC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Gsdpfxs Aawrle Aanobw Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, spindle moulder with tillable spindle guaranteed quality at your finger tips - easy-to-use Gjdpfocuwptex Aanobw the operator easily adjusts all movements due to a hand wheel with mechanical decimal readouts located on the front of the machine. spindle speed readout via LED's left right turning of spindle spindle moulder fence with manual adjustment machine in version 'LL' with left and right table elongation (2500 mm), pull - out work piece support and emergency stop button carriage on work table for tenoning works incl. fence and work piece clamp incl. feeder unit STEFF 2048 4 rollers 8 speeds work table dimensions 1200 (2500) x 855 mm spindle DM 30 mm usable spindle lenght 125 mm max. tool DM under table 240 x 80 mm suction connection DM 2 x 120 mm motor 5,5 kW INcL. OPTIONS: version 'LL' with long cast iron tables (2500 mm) & pull out work piece support in front fence with hand wheel adjustment and numerical read out machine dimensions L x B x H = 2500 x 855 x 900 weight approx. 500 kg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2008, Technical details: Gjdpfeluhcgox Aanjbw number of spindles: 6 spindle passage: 18 mm turning length: 63/50 mm weight of the machine ca.: 4,5 t spindle drive motor: 11 kW

Condition: used, Year of construction: 2003, Technical details: number of spindles: 6 spindle passage: 36 mm Article: cam-controlled multi-spindle automatic lathe Gbodpfx Aasyqpqxenew Manufacturer: Schutte Type: SF32 S Dnt Yob: 2003 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=36mm!!! Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images; various collets are included in delivery up to D36mm Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, total width: 1,990 mm, total length: 4,500 mm, total height: 2,300 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, overall weight: 9,000 kg, Gildemeister Sprint 65 Linear - CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Technical details: Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 Gbedpfxj Aawvwe Aanjw If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.