Used Munk Rectifier for sale (141)

Condition: ready for operation (used), Year of construction: 1994, Capacity: 300l, working position 0-40kg: 22° from horizontal, working position 40-260kg: tilted 45°. Main drive gearbox type: RF 73DT 80N4 SEW (Siri 52/72/8BA), power: 0.75kW, design: B 5, rated current: 3.8/2.2A, position: KLK 90°, voltage: 220/380V, 50Hz, multi-range, speed: 21-1400/min, seal: Kaco Ø 50 high, D-seal: SV-full. Tilting gearbox type: KA76 TR42 DT71 D4 BM SEW, hollow shaft diameter: 50mm, power: 0.37kW, design: H 4A, rated current: 2.25/1.3A, position: KLK 0°, voltage: 220/380V, 50Hz, multi-range, speed: 1.6-1400/min, braking torque: 5Nm, brake voltage: 220V, rectifier: BG 1.5. With operating manual and documentation. An inspection on site is possible. Ijdpfxsxg Ri Hj Ag Nstn

Condition: excellent (used), Year of construction: 2018, Automatic Galvanizing Barrel Plating Line GALWANOTECHNIKA (2018/2021) Technical Data Summary (Focus on Components and Capacity): ● Machine Type: Automatic Galvanizing Line, Barrel Type (Zn - Zinc Plating). ● Manufacturer: GALWANOTECHNIKA. ● Year of Manufacture: Main structure 2018, significant modernization 2021 (documented). ● Capacity: Approx. 220 tons/month (based on 3-shift operation, suitable for nails/small parts). Itodpfexm Ttzsx Ag Non ● Condition: Complete, operational, and assessed as very good post-modernization. Key Components Included: ● Plating Barrels/Aggregates: 7 units (purchased new in 2021 for nail plating). ● Rectifiers (Total 7 pcs): ○ 6 units x 400A/1700A (Year 2017). ○ 1 unit x 800A (Year 2017). ● Plating/Rinsing Tanks (Total 17 pcs): Includes tanks for galvanizing, cascade rinsing (3- and 2-station), and passivation (Year 2006 per statement). ● Automation: Control Cabinet/Switchboard (Year 2018), Plating Hoists (Year 2016). ● Wastewater Treatment (LPW-ANLAGEN tanks): Scrubber, Fan, and complete Wastewater Treatment Station. ● Auxiliary Equipment (Modernization 2021): Full PE Acid-resistant Drip Tray under the line, Chemical Laboratory with equipment. Commercial Details: ● Documentation: Technical-Operating Documentation (DTR) available.

Condition: good (used), functionality: fully functional, type of input current: three-phase, overall weight: 800 kg, total width: 600 mm, total length: 820 mm, total height: 1,600 mm, input voltage: 400 V, Used Liebert NX 40kVA / 32kW 3-phase UPS battery backup system (tested and includes good batteries) Isdpfx Ajt H Irlog Njtn Rated power: 0.8 PF: 40 kVA Output power 32KW Battery Battery type VRLA 40x YUASA NPL24-12 I 12V 24 AH Width mm 600 Depth mm 825 Height mm 1600 Weight (approx.) without battery kg 341 Input Parameters Rectifier Type IGBT-based Vector Controlled PFC (PF Corrected) Input Voltage to Rectifier Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 3-w Input Voltage to Bypass Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 4-w (Ph+N) Permissible Input Voltage Range for Rectifier Vac 305 to 477 Input Frequency Hz 50 or 60 Permissible Input Frequency Range for Rectifier Hz 40 to 70 Input Current THD at nominal voltage % < 3* without any Filter Input Power Factor at nominal voltage ≥ 0.99* without any Filter Flexi Power Walk-In seconds 5 to 30 (selectable) Output Parameters Inverter Type IGBT-based Vector, Repetitive & PI Controlled Output Power kW 24 32 48 64 Output Voltage Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 4-w (Ph+N) Output Voltage Regulation % +/- 0.5 (3-phase RMS average) Output Frequency Hz 50 or 60 Output Frequency Regulation % +/- 0.05 Output Voltage THD at nominal voltage % 1% (max) Capability to handle High Crest Factor Load 3 : 1 (compliant with IEC 62040-3) Capability to handle Step Load 0-100 or 100-0 Transient Recovery mseconds < 0.5 (recovery to 95% of the voltage level) 10 (recovery to 99% of the voltage level)

Condition: ready for operation (used), IFE Electro Magnetic Conveyor Belt Brand: IFE Length frame A-A = 2200 mm Beltwidth: 800 mm Driving: 3 kW e-motor Dim. Block : 900 x 900 x 600mm Including rectifier. Itedpew Tr Rtsfx Ag Nsn

Condition: used, mileage: 326,407 km, power: 220 kW (299.12 HP), first registration: 05/2018, overall weight: 18,000 kg, fuel type: diesel, color: silver, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space width: 2,470 mm, loading space length: 7,980 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, Mercedes * Antos 1830 * Carrier Easycold Supra 1250 Mt * Auxiliary heating * Radio * Air conditioning * 3 compartments / areas that can be locked * Polarus refrigerated box body K 50 V * Length body 8.2 m * Load compartment length: 7.98 m * Load compartment height: 2.2 m * Load compartment width: 2.47 m * Palfinger tail lift with 2,000 kg load capacity * New HU/SP before sale * German truck / German Truck * Unladen weight: 11,300 kg * Permissible total weight: 18,000 kg * Maximum payload: 6,700 kg * All information without guarantee * The HU/SP will be renewed before the sale. * Further information and criteria on ätzliche Service Leistungen / Additional service * Umlackierungen, Nachrüstungen möglich / repainting, retrofitting possible Itedpjnfwxnofx Ag Nsn * Kurzzeitkennzeichen / Zollkennzeichen / License plate * Überführung und Verschiffung möglich / Transfer and shipment possible * Hilfe bei Zoll und Export Dokumenten / Help with customs and export documents * Besorgung von COC und EUR Dokumenten / Procurement of COC and EUR documents * Seit 1991 auf dem Markt / Since 1991 on the market * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimum financing for every customer. We can also often support customers with poor credit ratings and put them in touch with good leasing partners. * Own workshop / own workshop * Mówimy po polsku. * We speak english. * Goworim po russki * The repainting in your desired color is possible in our company at a reasonable price and in good quality. The repainting in your desired color is possible in our house at a reasonable price and in good quality. * Are you further away and have no opportunity or time to inspect and test a truck at our premises? No problem, you are welcome to appoint an independent expert of your choice to inspect the truck technically and visually. If, contrary to expectations, a defect should occur, we can rectify the defect quickly and effectively in our workshop. We can also deliver your new used truck anywhere in Europe for an additional charge. You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: new, Year of construction: 2017, Dry epoxy cast traction rectifier transformer - manufacturer TESAR Italy, power 2800kVA 20(2x±2,5%)/2x0.586kV, Dd0yn11, IP00 (without protection), load level IV (IEC6016), 100%-2800kVA-continuous, 150%-4200kVA-2 hours, 300%-8400kVA-60s, standard losses according to IEC, Al-Al winding, electrostatic screen, dimensions 2.45x1.4x2.7m (lxwxh), weight 7500kg, never used, complete documentation and test report, 6 pcs in stock, year of manufacture 2017, suitable for battery storage systems BESS, can be installed outdoors in case of IP33 protection. Price negotiable Iodpfx Ajxlybceg Nstn

Condition: used, mileage: 400,000 km, Year of construction: 2016, Serial number: WDB9642241001xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20562 Specifications: Model year: 2016 Mileage: Approx. 400,000 km EU approved until: 08.05.2026 Engine: 578 hp, Euro 6 Iodjwph D Nopfx Ag Nstn Drivetrain: 6x2 Transmission: Automatic Suspension: Air suspension front and rear Wheelbase: 330 / 135 cm Retarder Case and tires: See pictures for details Extras: Compressor horn, AC/climate, Radio with DAB Condition: Ready for delivery Description: 2016 Mercedes-Benz Arocs 2658 6x2 tipper. Previous sensor errors have recently been rectified. Ready for delivery Km: 400000 HK: 577 Technical approved: Yes EU-approved until: 08.05.2026 Own weight: 14300 Total Weight: 28000 Payload: 13625 Width: 255 Length: 746,5 Euro: 6 Model: Arocs 2658 Gearbox: Automatic

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, working width: 1,080 mm, area performance: 7,560 m²/h, overall weight: 1,385 kg, warranty duration: 12 months, water tank capacity: 260 l, HAKO SCRUBMASTER B260 R WB1080 SCRUBBER NEW HAWKER PERFECT PLUS 36V 480Ah TRACTION BATTERY (6PZS480) NEW NEOS 36V 50A CHARGER 2020 production year 1080mm cleaning head (WB1080) equipped with two new medium hardness cylindrical brushes, enabling work on any surface. New rubber squeegees made of high-quality natural rubber New protective rubbers around the brush head prevent water from splashing outside the machine's outline The device is equipped with a new durable drain hose and a new suction hose The new suction turbine ensures high water suction power from the squeegees Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply voltage: 36 V Working width of brushes (mm): 1080 Suction width (mm): 1290 Theoretical efficiency (m²/h): 7560 Tank capacity clean/dirty water (l): 260/260 Number of brushes (pcs): 2 Brush revolutions (rpm): 640 Working speed (km/h): 7 Total weight, ready to work (kg): 1385 Isdpswtdp Aofx Ag Notn DIMENSIONS: Length with squeegee (mm) 2020 Height (mm) 1490 Width with squeegee (mm) 1290 Width without squeegee (mm) 1210 INCLUDED: NEW TRACTION BATTERY HAWKER PERFECT PLUS 36V 480Ah (6PZS480) NEW NEOS 36V 50A RECTIFIER NEW cylindrical brushes 1080mm (x2) NEW suction turbine 36V 700W NEW drain hose NEW suction hose NEW head protection rubbers (x2) Suction bar with new rubbers Tenzi Normal 5L fluid - FREE KEY FEATURES: A 260-litre tank allows you to pour a large amount of cleaning solution, so you don't have to stop working often to refill it Thanks to its design, the machine is very manoeuvrable. A small turning radius also allows you to work in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface The ergonomically designed cockpit and the centrally located operator's seat provide good visibility of the cleaned surface The large working width (1080mm) ensures high surface efficiency A very legible and intuitive control panel.

Condition: excellent (used), Year of construction: 2006, operating hours: 628 h, functionality: fully functional, Offered is a meat cutter - sausage cutter from K+G Wetter Cutmix 50L. Type: STL, 50L. Year built: 2006. 628 operating hours. Knife shaft variable speed from 50 to 5000 rpm. Bowl with 2 speeds. Iedpfx Aew R Tt Deg Netn Voltage: 380V, 36A, 24 kW. The machine is made entirely of V2A stainless steel. Mixing mode forwards and backwards, continuously adjustable. The machine has been workshop tested, defects have been rectified, fully functional. 6-knife head, ready to use. Payment in cash or by advance payment only! Sale only to businesses, no guarantee, no warranty. Further details upon request.

Condition: good (used), Power: 7,8 kW. Amperage: 52 A. Voltage: 150 V. 100% ED Magnet L x W: 1.780 x 1.380 mm. Conveyor belt: 1.400 mm. AA. : Ca. 2.800 mm. Itsdpfx Aog Stwmeg Nsn With transformer rectifier of 380V. primary. Overband separator will be overhauled, sandblasted, painted.

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 145200 € 2744.28 € 1350 mm 0,4 - 120 mm 1370 x 2200 mm 6000 m³/h 150 mm 6 bar 4200 mm 2300 mm 2350 mm 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP * Machine made of stress-free welded steel construction for stable and rigid structure * Work table with motorised height adjustment via 4 synchronised spindles. * Independent drive motors for each work group. Ijdpfowir Dajx Ag Notn * Hoods for extraction inside the machine, one per station. Touch screen for: * Automatic star-delta connection of the main motors * Digital display for sheet thickness with decimal point tolerance * Material thickness adjustment (+/- 0.1 mm) * Machine condition monitoring with alarm messages FEEDING SYSTEM * Robust steel structure, wear-resistant surface. * Vacuum conveyor belt on request * The table raises and lowers from 780 mm to a maximum height of 950 mm above the floor. The power of the motor for height adjustment of the table is 0.25 kW. * Maximum permissible weight on the table: 140 kg. * Variable feed speed via frequency converter 0,4 to 4,5 m/min, Option 0,2 to 2,0 m/min or 0,6 bis 6,0 m/min. * Rubber conveyor belt, oil and temperature resistant. * Lateral guides to prevent the belt from lifting off. * Rubber pressure rollers in front and behind each station, oil and temperature resistant. * Automatic centring device for the conveyor belt * Automatic servo cooled motor * Speed motor on the main touch screen 1 TH R GROUP DEBURRING WITH ABRASIVE BELT * Rectified and balanced contact roller with 180 mm diameter. Coating of oil and heat resistant nitrile rubber. Standard roller hardness 55° shores. Mounted on an eccentric shaft that allows to control the working position and compensate the abrasive belt wear, with a range of 8 mm. This system is controlled by a pneumatic cylinder that allows the automatic insertion of the group into the work and, in case of emergency and/or machine stop, the immediate removal of the sanding belt from the working point. It is possible to insert sanding belts and/or Scotch Brite. * Pneumatic on-off switch. * Roller adjustment up-down "grain" stroke 10 mm * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotation speed in feed direction 4 - 18 m/s. * Width and duration of the oscillation setting. * Pneumatic tensioning system for the abrasive belt. * Sanding belt centring system, with electronic photocell, Oscillation adjustment in width and time. 2ND GROUP ROTATING BRUSH UNIT * 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and a length of 530 mm. * Motorised raising and lowering of the group to regulate the pressure of the deburring. * Variable speed motor 1,5 kW. * Variable speed group electronic inverter 6 - 12 U/min. * Brush motor with variable speed, power 6 kW (4 x 1,5 kW). From 300 to 900 U/min. * Speed programmable control and display on the electronic touch screen. CONTROL OF THE THICKNESS AND THE BRUSHES * Motorised table lifting with fine adjustment via 4 precision screws with ball bearings * Maximum operating pressure 120 mm * Pressure motor power kW 0,75 * Pressure adjustment via touchscreen CONVEYOR BELT CLEANING Brush system in nylon canvas for cleaning the conveyor belt (length 1350, Ø =150 mm), located at the back of the machine under th...

Condition: ready for operation (used), BAUMÜLLER BUH2-90/90-62-102-00 Power converter unit, inverter/rectifier good condition tested traces of storage storage find like pictures For further technical information please refer to the pictures Scope of delivery as shown Itodpetrlt Esfx Ag Nen Auction price includes 19% VAT and invoice Shipping/collection by arrangement Express shipping also possible worldwide / Worldwide express-shipping possible. No guarantee / warranty Due to the new warranty law we are obliged to inform you of the following: Even if the goods are new or used, we sell the goods as spare parts without warranty as we often deal with used products from dismantling or insolvency goods, a warranty within the legal framework is not possible for us. Trading between traders is one way of excluding the statutory guarantee or warranty. If you have any questions, just write to us. No. B6491

Condition: excellent (used), Year of construction: 2015, operating hours: 6,019 h, lifting height: 3,300 mm, fuel type: electric, mast type: duplex, construction height: 2,150 mm, fork length: 1,150 mm, tire condition: 100 %, Equipment: sideshift, Toyota 8FBET 16 Load capacity 1600 year of production 2015 Side shift lift height 3300 mm folded mast 2150 mm Duplex mth 6019 48V battery from 2109 Isdpjrwx R Sofx Ag Netn rectifier included 3 wheel

Condition: used, Welding transformer, high-current transformer, transformer for spot welding machines, projection welding machines, seam welding machines ELREX type 3x ET70.0.G Serial No. Year of manufacture approx. 1990 Consisting of three water-cooled transformers with water-cooled rectifier block Performance data: Total power at 50% duty cycle: 210 kVA Secondary voltage: 7 - 10.5 volts (adjustable in 4 steps via terminal connectors on the transformer) Primary connection: 380 volts, 50 Hz (three-phase) Consisting of three transformers – single transformer data: Power at 50% duty cycle: 70 kVA Secondary voltage: 7 - 10.5 volts (adjustable in 4 steps via terminal connectors on the transformer) Secondary current at 50% duty cycle: 6.7 kA Primary connection: 380 volts, 50 Hz (two-phase) Cooling water requirement per transformer: 4 liters/min. Insulation class: F - Water-cooled transformer - Water-cooled rectifier block mounted on the secondary side - Direct current power output connection via contact surfaces 50x50 mm, thread M20x1.5 mm - Temperature monitoring at each rectifier element and each transformer coil - Connection cable: 7 cores, cross-section 50 mm², approx. 6 m long Overall dimensions (W x H x D): 700 x 710 x 440 mm Total weight: 480 kg In good condition Ijdpfx Agodzp Txe Njtn

Condition: new, Year of construction: 2025, Fully electric mast truck with a capacity of 1,200 kg and a lifting height of 2,500 mm. Its undoubted advantage is the total height of 1830 mm, which allows easy adaptation to any door. Characteristics of the Q12E25 trolley: The fully electric mast truck with a capacity of 1,200 kg and a lifting height of 2,500 mm is a unique solution in the field of storage and transport. Its undoubted advantage is not only its impressive ability to lift heavy loads, but also its exceptionally low total height of only 1,830 mm. Regardless of the type of surface, the mast trolley equipped with polyurethane wheels is perfect for various surfaces. These wheels are extremely durable, abrasion-resistant and guarantee smooth and quiet movement of the stroller. An additional advantage of this stroller is the ability to choose from two driving modes. Thanks to this, the operator can adapt the truck to a specific situation and needs, thus increasing his efficiency and precision of work. Regardless of the conditions and requirements, the mast trolley ensures reliability, safety and comfort of use. A solid structure made of high-quality steel ensures greater stiffness and stability when lifting. The mast truck is also equipped with important safety features. The mast trolley is also equipped with a LED battery charge indicator and a "belly" safety switch that prevents it from colliding with the operator. A sealed, maintenance-free AGM battery and a built-in charger with rectifier ensure convenient use and minimize the need for battery maintenance. Additionally, the speed controller ensures safe driving and speed limits, and the turtle driving mode allows precise maneuvering in tight spaces. Lifting and lowering is done electrically under the operator's full control, ensuring precise and safe operations. We do not require technical inspections during the warranty period. Our mast truck is solidly constructed and performs to a high standard, eliminating the need for regular inspections during this time. We are confident that our product will meet your expectations in terms of reliability, performance and safety. WHEELS AND ROLLERS MADE OF POLYURETHANE Rollers of this type are characterized by high abrasion resistance and increased resistance to mechanical damage. They are universal and work perfectly on various types of surfaces. They generate minimal rolling resistance, which makes maneuvering and moving on the surface easier. Technical parameters MAX LIFTING HEIGHT 2500 mm CAPACITY 1200 kg CENTER OF GRAVITY 600 mm FORK LENGTH 1150 mm EXTERNAL FORK WIDTH 550 mm HEIGHT WITH FORKS LOWER 1830 mm Ijdpsrh Eybjfx Ag Netn HEIGHT OF RAISED MAST 2950 mm HEIGHT OF LOWER FORKS 85 mm TOTAL WIDTH 790 mm TOTAL LENGTH 1800 mm CLEARANCE 30 mm TURNING RADIUS 1390 mm TRAVEL SPEED WITH / WITHOUT LOAD 3.5 / 4.0 km/h LIFTING SPEED WITH/WITHOUT LOAD 100/200 mm/s LOWERING SPEED WITH/UNLOAD 120/100 mm/s HILL CLIMBING ABILITY WITH/UNLOAD 3/10% WORK BRAKE TYPE electromagnetic DRIVE ENGINE POWER 0.75 kW LIFTING SYSTEM MOTOR POWER 2.2 kW BATTERY CAPACITY 12V 85Ah 2 pcs. WHEEL MATERIAL Polyurethane WEIGHT 450 kg

Condition: refurbished (used), Manufacturer: Steinert Itsdpowvaidofx Ag Njn Type: UMS 45 70 80/61 3,1 kW / 51 A. / 61 V. 100% ED Magnet L x W: 806 x 750mm. Conveyor Belt: 800mm. (new) AA.: Ca. 1.300mm. Weight: 1.550 KG With new transformer rectifier of 380V. Primary.

Year of construction: 2000, condition: ready for operation (used), Working width: 2550mm, max. sheet thickness: 3mm, cutting angle: 1.7°, stroke rate: 34/min, power: 4kW, weight: approx. 3000kg. The machine has been calibrated several times, but still has inaccuracies that cannot be rectified. Documentation available. On-site inspection is possible. Itedov Extuspfx Ag Non

Condition: used, Year of construction: 2008, PC OFFICE / WIN EDGE control Working height adjustable by C.N. Panel height (mm) 60 Feed speed mt / min 25 Upper motorized rubberized belt electronically adjustable by CN Side roller conveyor with idle wheels for panel support Rectifier group with two motors Reel holder warehouse Gluing unit for EVA hot melt glue with pre-melter and glue pot Edge pressure group on straight profiles with pressure rollers End trimming unit with 2 motors with automatic inclination adjustment Trimming unit with two superimposed motors Gleaning unit with 2 adjustable tilting motors Rounding unit with 4 motors Toupie unit tiltable 0-90 ° Sanding unit Isdsw Dd Efopfx Ag Notn

Condition: used, Bar contactor, DC contactor, contactor, DC switch, power contactor, circuit breakers, high voltage switches ABB Type NORR63-03 CC-SP FPL7146886R6000 CTC2014028R0001 Contactor Type: normally closed Main contacts Design: open mounted on ingots Drive: Alternating current + bleached magnetic circuit +rectifier + economy resistor Drive Nominal voltage: 220-230 V / 50-60 Hz Main contact rated current: 63 A Main contact Nominal voltage: 1500 VDC Number of main contacts N/O contact: 0 Number of main contacts normally closed: 3 Number of auxiliary contacts: 1 NC contact + 1 NO contact + 1 changeover contact Auxiliary contact rated current: 6 A - Main contacts with deion chambers for fast spark quenching Dimensions W x H x D: 410 x 250 x 195 mm Weight: approx. 9 kg Used but in very good condition Itodsfipfuopfx Ag Nsn

Condition: used, Double squaring edgebander usable in line or off line as first or second machine Itedpskvrxqefx Ag Njn CNI control on separate electrical cabinet Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3200 Maximum panel width mm 3200 Min - max panel height mm 10 - 60 Edge thickness in roll min - max PVC-ABS mm 0,3 - 3 Continuously variable feed speed 10 - 40 m\min Motorized pressure rubber belt Bearing track with retractable pin Distance between the retractable pins mm 500 Squaring part composed of (for each side): Rectifier unit with two motors Edging part made up of (for each side): Gluing unit with premelter for EVA glue Edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapped trimming unit Staggered gleaning unit with two motors Rounding unit with 4 motors 0-90° inclinable spindle moulder unit Edge scraper group Brush group

Condition: used, Year of construction: 2019, Smart Touch Numerical Control with Sintra HD Software Panel height 10 - 60 mm Ijdpfjr Ip Sdjx Ag Nstn 22 mm solid wood Pvc / Abs mm 3 Feed speed up to 25 meters / min Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Motorized and electronically adjustable panel support guide by C.N. Side roller conveyor with idle wheels for panel support ADZ-700 anti-adhesive group Rectifier unit with 2 electronically adjustable motors by C.N FI-502 Lamps to heat the edge of the AdIRL-700 panel Reel holder plate at 1 position Gluing unit for EVA hot melt glue with QM-705 glue pot Additional glue tank Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. Anti-adhesive group End trimming unit with 2 IN-801 motors Offset trimming / gleaning unit with 2 motors electronically adjustable by C.N RF400 PRO-NESTING KIT for gleaning unit Non-stick group Rounding unit with 2 multifunction motors (gleaner + rounder) AR30 NC LPT-700 non-stick liquid application system Electronic edge scraper unit electronically adjustable by C.N RB400 PRO-NESTING KIT for edge scraper group RCC-701 glue scraper unit Brush group "SP-501" "PH-700" hairdryer group

Condition: used, Year of construction: 2016, Power Touch control (touch screen system) with 21" full HD video Panel height 60 mm Pvc/Abs 3 mm Solid wood up to 12 mm Feed speed up to 20 m/min Working height electronically adjustable by N.C. Panel support guide with idle routines Side roller conveyor with idle wheels for panel support Anti-adhesive group Two-motor rectifier group Roll holder plate EVA glue gluing group with pre-melting unit and glue pot Edge pressure group on straight profiles with pressure rollers automatically adjustable by numerical control End trimming group with automatic inclination adjustment Two-motor chamfering group with adjustment 2-motor multifunction rounding group (chamfering + rounding) Edge scraping group with electronic adjustment by numerical control Glue scraping group Brush group Anti-adhesive group Iedpfx Agewwtpyj Netn

Condition: used, Power Control Pc 22 Panel height 60 mm Solid wood mm 20 Pvc / Abs mm 3 Feed speed up to mt / min 24 Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Panel support guide Side roller conveyor with idle wheels for panel support Rectifier group with two motors Lamps to heat the edge of the panel 2-position reel holder magazine with automatic edge change from C.N. Gluing unit for EVA hot melt glue with pre-melter and glue pot Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. End trimming unit with 2 motors with automatic inclination adjustment Overlapping trimming unit with 2 motors Rounding unit FK 11 with 2 multifunction motors (gleaner + rounder) with control adjustment numeric automatically Edge scraper group Glue scraper group Brush group Itsdpfsvph Hljx Ag Non

Condition: used, Year of construction: 2013, Touch Panel Control Panel height 60 mm Solid 15 mm Pvc/Abs 3 mm Variable feed speed Working height electronically adjustable by C.N. Adjustable panel support guide Side roller conveyor with idle wheels for panel support Anti-adhesive unit 2-motor rectifier unit Lamps for heating the edge of the panel Roll holder plate Gluing unit for EVA hot melt glue Gluing unit with AFS (Air Force System) Edge pressure unit on straight profiles with adjustable pressure rollers End trimming unit with 2 motors Chamfering unit with 2 tilting motors Multifunctional 2-motor rounding unit (cornering unit + rounder) Edge scraper unit Glue scraper unit Brush unit Itedpfx Aswwkyiog Non

Condition: used, Lot 1 squaring-edging line composed as follows: 1) "Easy Order" automatic feeder for longitudinal and transversal passage of panels * Automatic adjustment of the stops according to the size of the panel * Number of cycles / minute from 10 to 14 depending on the type of passage and size of the panel. The number of cycles / minute is minimal in the case in which panels with always different dimensions are worked * Workable dimensions for longitudinal passage: min 250 x 130 max 3000 x 1200 * Workable dimensions for cross passage: min 130 x 250 max 1200 x 3000 * Maximum panel weight: Kg 70 * Brushless motors 2) External milling machine for customized processing * Device for milling and removing material on the non-edged side of the panel * Ready for "Eco Power Pack" * N ° 1 motor 6,5Kw - 12000 rpm with vertical rotation axis * Pneumatic automatic vertical exclusion * Automatic lubrication of the guides 3) Bridge system for customized longitudinal and transversal machining * Automatic movement of the main guide on linear guides with Brusless motor * Automatic vertical exclusion of the main guide * Automatic lubrication of the guides * Max opening 3000 mm 4) "Watch" line supervisor with automation for handling and returning the panel to the operator * Numerical Control with PC Office Software with Windows 7 operating system * Barcode reader * Tele diagnosis * Supervision and control software for quick and easy management of the main functions of the squaring machine. * Realistic and descriptive interface that allows you to monitor the time and status of the squaring-edgebander. * Unlimited number of programs * Possibility of extrapolation of production reports 5) Manual loading station with automatic recognition of the size of the panels * N ° 3 air curtain benches (dim. 640 x 1600 mm each) for the positioning of the panels with roller conveyor for the progress of the same * Inclined and motorized introduction roller conveyor (dim. 2600 x 3200 mm) for the alignment of the panels on the guide principal * Main guide controlled by C.N. for alignment to the work line. * Barcode reader for automatic recognition of the dimensions of the introduced panel 6) Panel turner * Roller conveyor with 6 + 6 motorized rollers * Double plane group for rotation * Fully automatic motorized rotation controlled by encoder with adjustment by C.N. * Motorized roller conveyor at the exit of the squaring-edgebander 7) 90 ° translation station * N ° 2 transfers with rollers and belts (dim.1440 x 3200 mm and 1600 x 3200 mm) 8) 90 ° translation station * N ° 2 transfers with rollers and belts (dim.1440 x 3200 mm and 1600 x 3200 mm) 9) Rotation station for panels with a width greater than 1300mm * N ° 1 roller conveyor (dim.1280 x 2700 mm) 10) Transfer with 3 belt conveyors 11) 90 ° final translation station * N ° 1 transfer with rollers and belts (dim.1440 x 3200 mm) * N ° 1 transfer with rollers and belts (dim.1100 x 3200 mm) 12) Stefani Evolution SB One squad-edging machine * Numerical Control with PC Office Software with Windows operating system * DVD player * Tele diagnosis * Bar code reader with radiofrequency keyboard (with the possibility to customize the reading software and data entry) * Panel height 60 mm * Minimum panel width 90 mm * Maximum panel width 1600 mm * Variable feed speed 10 - 40 mt / min * Working height electronically adjustable by C.N. * AA anti-adhesive group * Double shredder group with electronic positioning Kw 5.8 + 5.8 * Rectifier unit wi... Itjdevphxnepfx Ag Njn