Used New Bench Drill for sale (23,441)

Condition: used, Year of construction: 2014, throat 180 mm quill stroke 80 mm Nwedpfx Asxbtrgenfjf continious capacity 20 spindle taper MK 2 table-size 280 x 245 mm height of the machine ca. 1000 m column diameter 73 mm distance spindle /table max. 425 mm dimensions ca. 615 x 330 x 1015 mm weight ca. 60 kg incl. vice HM Müller HT100P

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 28 mm throat 200 mm bore stroke 105 mm Nedpfx Aoxh Swnjnfswf table surface area 360x340 mm Distance spindle/table max. 540 mm turning speed range - stepless 120-3000 U/min

Condition: good (used), Year of construction: 1974, machine/vehicle number: 571, Offer 25456 Nwedoyfn Npjpfx Anfof Technical Data: - Drilling capacity: 28 mm - Drill spindle taper: MK 3 - 8 spindle speeds: 100 – 1120 rpm - Table area: 400 x 400 mm - Drilling unit height adjustable via handwheel - Minimum / maximum distance table / drill-milling spindle: 300 / 600 mm - Drilling spindle stroke: 120 mm - Drilling spindle outreach: 260 mm - Coolant system - Machine base cabinet with door - Drive: 400 V / 1.5 / 2.3 kW - Space requirements approx.: W 500 x H 1800 x D 950 mm - Weight approx.: 200 kg

Condition: used, Year of construction: 1957, Technical details: bore capacity in steel (diameter): 20 mm throat: 220 mm bore stroke: 85 mm Distance spindle/table max.: max. 260 mm range of revolution per miute: Keilriemen U/min spindle taper MT: 2 table surface area: 220 x 280 mm base plate surface area: 225 x 280 mm distance spindle center to floor plate:: max. 380 mm total power requirement: 0,33 kW Nwedpfxju Id D Uo Anfof machine weight ab.: 125 kg dimensions L x W x H: 0,8 x 0,4 x 0,8 m The machine is currently in the technical department. Table rotatable 380 V with connection cable 2500mm *

Condition: used, Year of construction: 1975, Technical details: Nwsdpfx Anevc Aytefsf bore capacity in steel (diameter): 32 mm throat: 230 mm bore stroke: 160 mm spindle taper MT: 3 feed - manual: Handhebel mm revolution per minute: 100...2000 U/min headstock adjustment: 180° Grad headstock traverse: in Höhe/height/altura 350 mm clamping surface area: 1020x615 mm height over floor: 860 mm column diameter: 102 mm total power requirement: ca. 1,2 kW weight of the machine ca.: 0,5 t space requirements approx. LxWxH: L:1,2xB:0,77xH:2,26 m equipped: - toothed drill chuck up to 16mm Machine on sale as is, without test run. i.D. *

Condition: new, bore capacity in steel (diameter) 16 mm throat 150 mm bore stroke 90 mm turning speeds 340 - 2200 U/min 243 x 243 mm total power requirement 0,5 kW / Volt weight of the machine ca. 42 Kg dimensions 400 x 450 x 900 mm Table drill - Digital speed display - Spindle protection - vice - drill replacement - Quick span feed (1 to 16 mm) Nodpfxovdld Rj Anfewf - Tilt and rotating rider work table. - deep stop - tool set - documentation

Condition: new, bore capacity in steel (diameter) 25 mm throat 240 mm Nodpfx Anjfhk Ubefjwf bore stroke 110 mm turning speeds 125 - 2850 U/min 310 x 320 mm distance drilling head - clamping area max. 650 mm total power requirement 0,75 / 400 kW / Volt weight of the machine ca. 0,175 t dimensions 0,95x0,8x1,75 inkl. Tisch m

Condition: new, bore capacity in steel (diameter) 20 mm throat 180 mm bore stroke 82 mm turning speeds 220 - 2840 U/min Nwodpfxeupxkde Anfof 290 x 290 mm total power requirement 0,55/0,75 kW / Volt weight of the machine ca. 54 Kg dimensions 820 x 500 x 290 mm CE-tested spindle hood. Keyless chuck (1 to 16 mm) Tilting work table. Depth stop.

Condition: used, bore capacity in steel (diameter) 23 mm throat 310 mm bore stroke 150 mm turning speeds 90 - 2000 U/min 420 x 360 mm total power requirement kW / Volt weight of the machine ca. 650 Kg dimensions 1,2 x 0,8 x 2,4 mm Bench drill Nwodpfxjvkixrj Anfsf - Left/right rotation - Advance - Base frame

Condition: new, bore capacity in steel (diameter) 14 /15 mm throat 180 mm bore stroke 70 mm turning speeds 420 - 2100 U/min 250 x 220 mm distance drilling head - clamping area max. 380 mm total power requirement 0,5/1,0 / 400 kW / Volt column diameter 65 mm Njdpfx Aefg U Tgonfjwf tool taper MK 2 weight of the machine ca. 0,08 t dimensions 0,4 x 0,5 x 0,9 m Table Drilling Machine with: variable feed Tapping function. depth display Coolant system Belt-drive spindle protection machine light

Condition: new, bore capacity in steel (diameter) 20 mm throat 195 mm Nwjdpfx Aeiiq S Nonfjf bore stroke 80 mm boring spindle MK 2 table surface area 320 x 300 mm total power requirement 0,75 kW weight of the machine ca. 0,072 t dimensions of the machine ca. 0,7 x 0,4 x 1,1 m

Year of construction: 1975, condition: used, General / technical data: Nwjdpfx Aecu I Exjnfef used machine, speed via flat belt drive with 3 steps speed range 700 rpm, 1400 rpm, and 2800 rpm quill stroke: 90mm quill diameter : 35mm Pillar diameter : 60mm Throat : 200mm Mounting : Drill chuck direct mounting Table area 380mm x 300mm Dimensions : approx. 720mm x 480mm x 750mm Weight : 60 kg Remarks : first-class running of the drilling spindle, three-phase connection, solid industrial design, year of construction approx. 1975

Condition: excellent (used), Working travels 450 x 260 x 560 mm Spindle stroke 120 mm cross table 770 x 320 mm Drilling capacity 25 mm Spindle speeds 55 - 9200 Rpm With DRO With Threading attachement Misc accessories Njdpfx Anetpgcnofewf MARCELS MASCHINEN CH

Condition: excellent (used), Drilling capacity -20 mm Nwsdpfx Asuy Sazsnfsf Spindle taper FEHLMANN Spindle speeds 50-6300 rpm Throat 276 mm Cross table 530 x 255 mm Digital read-out Accessories MARCELS MASCHINEN CH

Condition: used, Table Drilling and Thread Cutting Machine IXION Type BT 15 GL Machine no.: Year of manufacture approx. 1975 Drilling capacity: 15 mm Spindle mount: Taper B 16 Thread cutting range: M 2.5 to M10 Throat depth: 200 mm Quill stroke: 90 mm Table size: 285 x 220 mm Column diameter: Ø 75 mm Spindle speed: 320–1600 rpm, 4 steps Motor power: 0.55 kW Power connection: 380 Volt, 50 Hz - Spindle speed adjustable in 4 belt stages Njdpfxswk Nxqe Anfswf - Equipped with FAHRION GH 10 tapping attachment - With thread pitch guide bush, operation without guide bush also possible - Drill head height adjustment via hand crank - Column lowers from table plate for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Robust drilling machine featuring a powerful OPTIMUM brushless drive. Key highlight: menu-guided control for operating modes drilling/tapping. - Smooth-running and high-performance brushless drive - Optimal power transmission via aluminium pulleys combined with a toothed GATES quality V-belt - High running smoothness thanks to precision-ground multi-spline drive Nwjdow Rhk Rjpfx Anfof - Concentricity guaranteed at less than 0.015 mm, measured at the quill - Drilling spindle with precision ball bearings - Membrane keypad; dust- and water-resistant, easy to clean - High-quality OPTIMUM quick-action drill chuck included as standard - Separate emergency stop pushbutton - Precisely machined worktable with diagonal T-slots, 360° rotatable - Integrated coolant channel surrounding the worktable - Large, height-adjustable safety guard with interlock switch for maximum operator protection - Drilling depth stop - V-belt guard with safety switch - V-belt tensioning mechanism - Solid, large base plate with reinforced ribs at the rear Technical specifications: Column diameter: 60 mm Dimensions (LxWxH): approx. 552 x 445 x 850 mm Weight: approx. 64 kg Drilling capacity (steel): 18 mm Continuous drilling capacity (steel): 16 mm Tapping capacity (steel): M10 Table size: 230 x 245 mm Speed range: 100 – 6000 rpm Number of speed ranges: 5 Total power connection: 1.5 kW Mains voltage: 230 V Quill stroke: 65 mm Spindle taper: MT 2 Throat depth: 130 mm Including quick-action drill chuck 1–13 mm Including machine vice BMP 100 Availability: short-term Location: Flörsheim

Condition: used, machine/vehicle number: 242350148, -WT 106- Offered here is a table drilling machine of the company Flott of the type TB23L. The table drilling machine stands on a special lifting table (no original lifting table). Nwedpfx Anolf Evcefef Technical data: - 6-fold speed adjustment (manual via belt pulley). - MK2 receptacle

Condition: new, Year of construction: 2013, functionality: fully functional, This is a drill bit sharpening machine suitable for drill bits from 8 to 30 mm in diameter, with an adjustable point angle from 90° to 140°. Standard equipment includes a CBN grinding wheel for HSS drill bits (lasts for at least 3,000 drill bits). A diamond wheel is also available for carbide drill bits, offered at a price of €90.00. Sharpening a drill bit is completed in three steps. First, the drill bit is clamped in a fixture, followed by the sharpening and pointing processes. The entire procedure is finished in less than a minute! Before clamping the drill bit, the diameter is set on the grinding machine using a rotary dial. The drill bit is aligned and clamped with the appropriate collet in the fixture placed into the left-side mount of the machine. Sharpening the cutting edges and pointing is straightforward: switch on the machine, insert the fixture with the drill bit into the right-side mount, and gently rotate from stop to stop – the first cutting edge is done. Then, rotate the fixture 180° to sharpen the second cutting edge. Pointing is carried out in the same way, simply using the top mount. That’s it. Just switch off the machine and release the drill bit. A clever design combines an eccentric and a special grinding wheel, so there is no need to worry about the cutting edge shape or clearance angle. An additional advantage is that both cutting edges are produced with exactly the same settings, ensuring optimum edge symmetry. Furthermore, the point angle can be freely selected between 90° – 140° before sharpening. High-precision collets for diameters of 8 to 30 mm guarantee concentric clamping. The grinding wheel has a lifetime of over 3,000 operations. In addition to the standard CBN grinding wheel for HSS tools, we also offer a diamond grinding wheel for carbide drill bits. Changing the wheel can be done in seconds with just a few simple steps. The compact design of the drill bit sharpening machine and its practical carrying handle allow for easy mobile use. As nearly all essential accessories such as collets, fixtures, or hex keys are stored on the machine, everything needed is always on hand. Njdpfx Aoyn Riwjnfjwf The drill bit sharpening machine is energy-efficient and space-saving. Sharpen drill bits without prior knowledge – clean, fast, and effective. Shipping weight: 25 kg 23 collets (8 – 30 mm) Standard CBN grinding wheel Machine dimensions: 350 x 290 x 220 mm

Condition: used, table surface area 170 x 170 mm base plate surface area 170 x 170 mm Nodpfjvh Nbbsx Anfewf throat 185 mm quill stroke 65 mm spindle turning speed range 500 / 896 / 1473 / 2428 U/min column diameter 65 mm total power requirement 0,37 kW

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 9022, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,450 mm, travel distance Z-axis: 930 mm, spindle diameter: 100 mm, spindle speed (max.): 1,600 rpm, travel distance W-axis: 506 mm, swivel angle B-axis (max.): 360 °, TECHNICAL DETAILS x-axis travel: 1,500 mm y-axis travel: 1,450 mm z-axis: 930 mm w-axis: 506 mm B-axis (table): 360° Table size: 1,100 x 1,400 mm Table rotary: 360° Nsdpsw T Sqtefx Anfewf Tool holder: SK 50 Spindle diameter: 100 mm Spindle speed: 5 - 1,600 rpm / stepless Feed rates (X/Y/W/Z-axis): 2 - 2,000 mm/min Rapid traverse X-axis (X/Y/W/Z-axis): 5,000 mm/min MACHINE DETAILS Table load capacity: 4.0 t Total power requirement: 40 kW Control cabinet dimensions: 2,000 x 600 x 2,000 mm Machine dimensions (LxWxH): 4.9 x 3.7 x 3.8 m Machine weight approx.: 14 t EQUIPMENT - Measuring probe - Electronic handwheel - Hydraulic weight compensation Y-axis - Universal milling head - CNC drilling and milling machine with hydraulic unit

Year of construction: 1990, condition: good (used), machine/vehicle number: 0125749, Technical data: -Drilling capacity approx. 30 mm - spindle mount MT 3 -Spindle speeds in 2 steps continuously variable 80-1400 RPM -Table surface 390 x 420 mm -Drill unit by hand crank height adjustment -min / max distance table / spindle 220 / 580 mm -Drilling spindle stroke 150 mm -Spindle projection powered 280 mm – 400 V / 1.3 / 2.3 kW Nwjdpfx Asd Ingfonfof -Space requirement approx. B 480 x H 880 - H 1200 X 1050 mm -Weight approx. 250 kg -Table base with storage space B 600 x h. 910 x H 800 mm -Weight 200 kg

Condition: good (used), Year of construction: 1991, machine/vehicle number: 00119451, Offer 24320 Technical Data: Njdpfxoxfa U As Anfjwf - Drilling capacity - in steel 13 mm - - in aluminum 15 mm - Drill spindle mount MK 1 - Drilling depth 70 mm - Distance spindle / column 180 mm - 5 drill spindle speeds 480 - 4000 rpm - Drive 400 V / 0.45 kW - height-adjustable drill table with T-slots 250 x 220 mm - Distance drill spindle / table approx. 270 mm - machined baseplate with T-slots 170 x 170 mm - Space requirement approx. W 400 x H 700 x D 500 mm - Weight approx. 100 kg - with - Quick-release drill chuck 1 - 13 mm

Condition: good (used), Year of construction: 1983, machine/vehicle number: 7346, Offer 24016 Nwedpfx Asrwmbgjnfef Technical data: - Drilling capacity 22 mm - Drill spindle holder MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 - 710 - 1400 - 2800 rpm - throat depth 210 mm - Machine table 480 x 420 mm - min. /max. distance drill spindle / table approx. 190 / 340 mm - Drive 400 V / 1.1 kW - Space requirement approx. W 450 x H 1200 x D 700 mm - Weight approx. 170 kg

Condition: good (used), Year of construction: 2002, machine/vehicle number: 025137, Offer 24190 Technical specifications: - Drilling capacity: 25 mm - Drill spindle taper: MK 3 - Drill spindle stroke: 140 mm - 8 spindle speeds: 100 - 2900 rpm - Min./max. distance spindle/table: 110 / 405 mm - Work light - Quick-action drill chuck - Coolant device - Machine vice - Machine base Nwjdpjwyl H Nefx Anfof - Drive: 400 V / 0.75 kW - Required space (W x H x D): 400 x 1250 x 600 mm - Weight approx.: 200 kg

Condition: good (used), Year of construction: 1980, machine/vehicle number: 334, Offer 19194 Technical data: - Drilling capacity 22 mm Nwsdpfx Ajrwl Nnenfef - Drill spindle holder MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 - 710 - 1400 - 2800 rpm - Right - left rotation - Projection 210 mm - Machine table 480 x 420 mm - Distance machined base plate / drill spindle 190 / 340 mm - Drive 400 V / 0.8 / 1.0 kW - Space requirement W 450 x H 1200 x D 700 mm - Weight approx. 170 kg