Used Niles for sale (66)

Condition: used, Year of construction: 2013, turning diameter . mm turning length 2000 mm control Siemens 840 D sl mainspindle: turning speed max. 3800 1/min Nkedpfx Aevu E R Seacsu mainspindle: torque max. 1200 Nm diameter of quill 140 mm center point MK6 quill power 5 - 30 kN feed rate Z-axis mm/min rapid traverse Z-axis 40 m/min feed rate X-axis - mm/min rapid traverse X-axis 25 m/min total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the production plant. The condition of the machine is good, the accuracy during turning operation is very good. The milling drive is not functional. A quotation from Niles for the repair of the milling drive is available on request. Including hydraulic steady rest.

Condition: used, Year of construction: 2008, tip circle diameter 650/800 mm workpiece length - max. 1100 mm max. module 20 (25) mm min. module 0,5 mm Nkodpfjw Rrbyox Aaceu control Siemens Sinumerik 840 D total connected load 62 kVA helical angle -45 / + 120 ° weight of the machine ca. 10 t

Condition: used, Year of construction: 2013, feed x/z 20/40 m/min rapid traverse (x/z) 18.000 /30.000 mm/min number of tool places 12 Pos. tool taper VDI 50 In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Njdsx Ik Tdopfx Aacsku Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, diameter 315 mm bore 95 mm Nksdpfoymf A Nox Aacju tool adaptor Din 55027 Gr. 8 revolutions per minute max. 1500 U/min Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 1971, turning diameter over bed 800 mm turning diameter over slide rest 480 mm turning length 3000 mm turning diameter in the slot 850 mm center height over bed 380 mm bed width 550 mm spindle head DIN 55022/8 spindle bore 73 mm speeds 18 - 900 U/min feeds 224 / 0,018-10 mm/U thread - mm pitch ca. 84: 0,2 - 224 mm total power requirement 17,5 kW weight of the machine ca. 8,6 t dimensions of the machine ca. 5,5 x 1,8 x 1,72 m Solid universal lathe with rapid longitudinal and transverse support traverse, pole-changing spindle motor (i.e., two speeds can be selected by increasing the Nsdpfxewwatrj Aacoku motor speed), single-lever control for all support movements, pre-selected feed rates, hardened bed guides, double-tiebar bed for high rigidity, high- positioned front guideway and low-positioned rear guideway in the V-prism for high accuracy, and triple bearings for the lathe spindle, threads in mm, inches and diametrical pitch. The year of manufacture is estimated. Many accessories! Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1998, turning length 4.500 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as NC steady rest and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. Nodpox Emvisfx Aacjku - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT

Condition: used, Year of construction: 1998, turning length 3.000 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 3.700 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000 equipped with a well as travelling lynette and tailstock. Nedpfx Ajxb Efrsacjku Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MC3000 | N40MC

Year of construction: 2018, condition: excellent (used), Hardly used at all. Installation dimensions (L,W,H) mm: 7,023 x 3,337 x 2,480 Weight: 16 t Working area Centre distance: 3,000 mm Cross slide diameter: 650 mm Bed diameter: 700 mm Nodpfjychzmox Aaceku X-axis travel: -15 ... +335 mm Machine equipment A11 main spindle, 2,000 rpm, 1,200 Nm (100%) Tailstock MK5, dragged 12 x KM40 tool holders Loading hatch for automatic loading & unloading 400V, 50Hz

Condition: good (used), Year of construction: 2019, Niles N 40 MC - 6000 Turning/Milling Center, year of manufacture 2019, Siemens SI 840 D SL control, X/Z 850/6820 mm, Y axis -200 / +400 mm, B axis 0.001°, B axis swivel range -105° / +95°, tool changer with 192 positions, C axis main spindle 0.001°, spindle speed up to 1750 rpm, 2 gear stages, max. workpiece weight between chuck and tailstock 6,000 kg, drive power 87 kW, HSK 100 interface, steady rest 70 - 425 mm, tailstock. Nkodsyh Hlropfx Aacou

Condition: good (used), Year of construction: 2022, Niles N 30 MC - 4500 turning-milling center, year of manufacture 2022, Siemens SI 840 D SL control system, travel X/Z 4756/725 mm, Y-axis +/- 250 mm, B-axis swivel range -105° / +95°, B-axis spindle speed up to 5,000 rpm, C-axis main spindle 0.001°, spindle speed up to 3,000 rpm, tailstock, steady rest, 144-position tool magazine, workpiece measurement, gear hobbing software. Njdpfx Asyh Hk Ieacsku

Condition: ready for operation (used), Year of construction: 1983, overall weight: 4,400 kg, number of axes: 3, This 3-axis NILES DLZ 630 V x 2000 was manufactured in 1983. It features a turning diameter over bed of 630 mm and over support of 340 mm, with a turning length of 2000 mm. The spindle speed ranges from 22.5 to 1120 rpm across 18 steps. Total power requirement is 15.0 kW, and it includes multiple steady rests and face plates. If you are looking to get high-quality turning capabilities consider the NILES DLZ 630 V x 2000 machine we have for sale. Contact us for more information. Nsdpfx Aaex Imrcjcoku • Turning diameter over bed: 630 mm • Turning diameter over support: 340 mm • Turning length: 2000 mm • Centre height: 290 mm • Clearance: 70 mm • Spindle speed range: 22.5–1120 rpm (18 steps) • Feed, longitudinal: 0.036–2.5 mm/rev • Feed, transverse: 0.018–1.25 mm/rev • Total power requirement: 15.0 kW • Transport dimensions (LxWxH): 5.0 x 1.35 x 1.5 m • Tailstock taper: MK5 Additional equipment • 400 mm tapered bar chuck • 1 face plate, D=630 mm • 2 face plates with cross slots • 2 large steady rests (340 mm capacity) • 2 steady rests (center type) • 1 travelling steady rest • Heidenhain position indicator (DRO) • Various tool holders • Tool cabinet with tool holders • Steady rest box

Condition: used, Year of construction: 1952, Technical details: turning diameter over bed: 1000 mm turning diameter over support: 520 mm turning length: 2500 mm support travel z-axis: plan: ca. 500 mm support travel z-axis: Obersupport: ca. 300 mm centre height: 300 mm spindle passage: 90 mm range of revolution per miute: 3,2 - 382 / 22 step U/min range of feed in x - axis: längs: 0,213 - 2,67 / 36 step m/min range of feed in y - axis: quer: 0,070 - 1,11 / 36 step m/min Nedpfx Aaju Tq U Ijcjku tailstock quill taper MT: 6 total power requirement: 22 weight of the machine ca.: 8,2 t dimension machine xH: 5,3 x 1.,6 x 1,6 m transport measurements machine: ca. 5,5 x 1,7 x 1,6 m Equipment: Faceplate Ø 1000mm 4-fold turning tool holder Lynette Ø 250 closed Accesorios four-jaw chuck Ø 630 i.D. *

Condition: used, Year of construction: 1960, Technical details: turning diameter over bed: 630 mm turning diameter over support: 320 mm turning length: 2800 mm centre distance: 2800 mm turning dia. in gap: 700 mm length of gap: 450 mm spindle bore of work spindle: 70 mm weight of the machine ca.: 4,4 t dimension machine xH: 4,7 x 1,5 x 1,5 m Thread cutting possible Accessories: 4-jaw chuck various tips Nksdpfx Aju Ix A Eoacou Gear wheels Jaws and small parts *

Condition: used, Year of construction: 2010, Technical details: spindle passage: 92 mm turning length: 1000 mm z-axis: min.: 404 mm z-axis: max. 1130 mm facing movement (x-axis): min./max.:15 / 335 mm control: Sinumerik SL840D max. torque on the spindle: 2500 Nm tool turret: 12 tools axial operating pressure: 6,0 bar rapid traverse: 20 m/min total power requirement: 88 kVA dimension machine xH: ca. 4,45 x m dimensions of the bar loader L-W-H: ca. L: 5,7 x B: 2,65 x H: 2,4 m CNC lathe with bar loader - inclined bed lathe -SL 840D control with NCU software 2.6, system software 1.4, store turn software 6.4, with one orientable C-axis, without driven tools -KNCS 260-72 chuck, SMW Autoblok -Clamping force generator via clamping cylinder VNK-200/86 / SMW Autoblok -Measuring system Fa. Heidenhain -Sauter VDI50 tool disk turret, electric drive Bar loaderMaster 80HF, type 33LL: -Dimension round material min./max.: Ø 20mm / 80mm -Minimum length of the workpiece: 33-38-43 to 1000mm -Maximum length of the workpiece: 33 - 3300mm / 38 - 3800mm / 43 - 4300mm -Feed speed (adjustable) 150mm/sec. - Return speed (adjustable) 950mm/sec. -max. offcut length: Ø 8+65mm = 400mm / Ø 66+80mm = 250mm -min. remnant 120mm Chip conveyor / hinged belt from Richter, type SP 450/63 -Discharge height = 1000mm, discharge side right Nkodpfjwf Nrasx Aacju Accessories: -div. tool holders VDI 50 -sizing adapter SK50-> VDI 50 -Power chuck Hainbuch Toplus Kombi Ax-zug GR100 -div. sleeves, guide jaws for bar loader Ø 20 - 75mm i.D. *

Condition: used, Year of construction: 1963, Technical details: turning diameter over bed: 1000 mm turning diameter over support: 620 mm turning length: 3150 mm centre distance: 3150 mm turning diameter in the gap: 1200 mm length of gap: 800 mm weight of the machine ca.: 11,5 t dimension machine xH: 7,5 x 1,5 x 1,7 m Njdpou Ix Arjfx Aacsku incl. 2x steady rests and various tips *

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible. Nksdpfx Aajwbuyzeceu

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Recess inlet: Ø 210 mm -Through hole: Ø 80 mm -Weight: 18 kg Nedjd Ew T Ajpfx Aacoku

Condition: good (used), three-jaw chuck, three-jaw lathe chuck -Handover: in current condition as viewed -Short cone: has been shortened -Chuck size: Ø 200 mm -Through hole: Ø 54 mm Nkedevbbmcjpfx Aacsu -Hole: cone Ø 104.5 mm -as per pictures, without additional accessories -Weight 14.4 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: 200x3-III -TGL: 30-2332 -Chuck size: Ø 200 mm -Weight: 16.7 kg Nsdpfjd R Exdjx Aacjku

Condition: good (used), three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck Nksdpfjdq Tt Hsx Aacsu -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 139 mm -Bolt circle: Ø 170 mm -Through hole: Ø 80 mm -Weight: 24 kg

Condition: good (used), Three-jaw chuck, 3-jaw chuck -Type: DHB 200x3x5 TGL 30 2332 -Mouth size: Ø 200 mm -Passage: Ø 54 mm -max.: 3000 rpm -Short taper mount: Ø 105 mm Nksdpfxedtap Re Aacju -Weight: 24 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm Nsdped Im S Hsfx Aaceku -threaded mounting -Through hole: Ø 53 mm -Weight: 19.7 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck Nkjdpfxeb A Slho Aaceu -DH200x3-III -TGL: 30-2332 -Mouth size: Ø 200 mm -Recess: Ø 155 mm -Bolt circle: Ø 174 mm -Through hole: Ø 57 mm -Weight: 12 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck Nedpfx Aeg Rcy Tsacjku -Manufacturer: Rohm, three-jaw chuck Chuck size: Ø 250 mm -Type: DH-B / 8-250 x 3 TGL 30-2332 -Throughout: Ø 40 mm - Hole circle: Ø 171 mm -Shot: short taper 8 -Weight: 24 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck Nodped Itcqefx Aacsku -Mouth size: Ø 250 mm -Recess: Ø 210 mm -Passage: Ø 80 mm -Weight: 20.7 kg