Used Oce 940 for sale (628)

Condition: used, mileage: 10 km, power: 88 kW (119.65 HP), first registration: 06/2026, fuel type: diesel, empty load weight: 2,060 kg, maximum load weight: 940 kg, overall weight: 3,000 kg, tire size: 215/70R15C, axle configuration: 4x2, wheelbase: 3,450 mm, next inspection (TÜV): 06/2028, CO₂ emissions: 166 g/km, fuel consumption (urban): 7.3 l/100km, fuel consumption (extra-urban): 5.3 l/100km, fuel consumption (combined): 6.3 l/100km, color: white, gearing type: mechanical, suspension: steel, number of seats: 3, total length: 5,413 mm, loading space volume: 11 m³, loading space length: 3,120 mm, loading space width: 1,870 mm, loading space height: 1,932 mm, Year of construction: 2026, front tire size: 215/70R15C, rear tire size: 215/70R15C, Equipment: ABS, air conditioning, airbag, cabin, central locking, cruise control, electronic stability program (ESP), immobilizer system, low noise, onboard computer, second-hand vehicle warranty, sliding door, soot filter, traction control, trailer coupling, Fiat Ducato Panel Van L2H2 2.2MJ 88KW/120HP New vehicle in stock, immediately available. Latest model of Series 10 (9.2)! Syncom: 290.1G2.2 Color: White 549. Total weight: 3,000 kg. Cargo space: L: 3,120 mm W: 1,870 mm H: 1,932 mm. 6-speed manual transmission 025. Air conditioning 2PX. 5'' infotainment system with color display, DAB radio, Bluetooth interface 316. Reversing camera 245. Radio remote control on the steering wheel. NHR Cruise Control with speed limiter. 738 Fuel tank 90 liters. 041 Electrically adjustable and heated exterior mirrors. 508 Rear parking sensors. 293 Double passenger seat with table. 132 Comfort driver's seat with center armrest + lumbar support. 173 Seat upholstery fabric crepe black. 500 Driver airbag. 502 Passenger airbag. 5F4 Safety package Electronic Stability Control: - Crosswind Assist - Trailer Stability Control - Post Collision Braking - Rollover Mitigation - Traction Control (ASR) - Hydraulic Brake Assist (HBA) - Hill Start Assist - Adaptive Load Control (LAC). Safety kit: - Emergency Brake Assist (pedestrian and cyclist detection) - Lane Departure Warning - Traffic Sign Recognition - Drowsiness Detection - Intelligent Speed Assist. 5EM Darkened headlights. 4DH Spare wheel (road tires) with on-board tools. 01P Acoustic reverse warning for pedestrians. 5DE Start & Stop automatic system. 0AA Eco pack with Stop & Start system, including activation switch, smart alternator (200 A), electric fuel pump. 806 Heated fuel filter. Tow bar (to be retrofitted). We are happy to offer you financing or leasing options on request. Optional extras available: Set of winter complete wheels on steel rim 215/70 R15 109/107R Nexen Winguard WT1 net 740 EUR, set of winter complete wheels on steel rim 215/70 R15 109/107R BRIDGESTONE W810 net 840 EUR, set of winter complete wheels on steel rim 215/70 R15 109/107R PIRELLI CARRIER Winter net 890 EUR, set of winter complete wheels on steel rim 215/70 R15 109/107R Michelin AGILIS ALPIN net 940 EUR. Wooden floor and side paneling available. Gbodjy Hda Uepfx Aayot

Condition: new, Year of construction: 2026, machine/vehicle number: H3-130_1, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 130 t, stroke length: 250 mm, operating speed: 210 mm/s, reverse speed: 130 mm/s, table width: 3,100 mm, throat depth: 250 mm, clearance between the columns: 2,600 mm, oil tank capacity: 180 l, total length: 4,690 mm, total width: 2,340 mm, total height: 2,980 mm, overall weight: 8 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic Press Brake Cone H3-130 - DA-66S CoastOne - Finland Technical Data Cone H3-130: Bending force: 130 tons Godey Dtaljpfx Aayebt Bending length: 3,100 mm Distance between columns: 2,600 mm Stroke: 250 mm Clear width: 450 mm Throat depth: 400 mm Table height: 940 mm Length: 4,690 mm Width: 2,340 mm Height: 2,980 mm Approach speed: 210 mm/s Return speed: 130 mm/s Bending speed: 10 mm/s Oil tank: 180 l Weight: 7.75 tons Main motor: 11 kW Standard Equipment: - CNC controlled X-, R-, Z1- and Z2-axes - 2 rear stop fingers - Delem DA-66S graphical controller - CNC-controlled crowning device Type 1 - AMADA Promecam tool holders - LazerSafe LZ2 front safety laser + PLC + rear light curtain - Standard punch and 4V die - Integrated LED lighting on the ram as front illumination Delem DA-66S Graphical Controller: - 24-inch high-resolution touchscreen - Graphical 2D programming interface - 3D machine visualization for simulation and production - Supports 3 to 8 axis control - Includes Profile-T Lite – T2D offline programming software - USB and peripheral interfaces - User-specific application support in the control’s multitasking environment - Interface for bend sensor and automatic angle correction

Condition: used, Year of construction: 2014, A high-performance, fully operational industrial roller coating line by CEFLA. All machines are from the 2014 and operated continuously until the end of 2024 (discontinued only due to the end of production), well-maintained, and ready for immediate integration into production. This setup is perfect for furniture factories, flooring manufacturers, and door producers seeking top-tier automation and flawless surface finishing Line Composition (15 Units Total): Fully operational: Coating & Filling Machines: 4 units - Smartcoater MF-EVO Roller Coaters Gbsdpfx Aajzu Rufeyst 1 unit - CEFLA SP1-EVO Roller Filler/Spackling Machine UV Curing Ovens: 2 units - CEFLA UV-R M1 Curing Ovens 2 units - CEFLA UV-R M2 Curing Ovens Transporters: 2 units – CEFLA TB900 Transfer Conveyors Dimensions: 900 x 1580 x Adjustable Height 860–940. Non-operational - for spare parts/repairs: 4 units – CEFLA Smartcoater MF-EVO Roller Coaters

Condition: ready for operation (used), Year of construction: 2000, Saw blade diameter: 800 mm Cutting height (max.): 300 mm Cutting width (max.): 550 mm Overall length: 2,000 mm Gedozd Ubujpfx Aaysbt Overall weight: 1,000 kg Overall width: 2,300 mm Overall height: 2,000 mm Working height: 940 mm Input voltage: 400 V Saw drive: 11 kW Saw blade arbor: 40 mm Operating pressure: 8 bar 8 roller conveyors, each 2 m long; roller width: 500 mm

Condition: used, Cast iron control/tracing marble Gbsdpfxjzww Uks Aayjt Length: 1700 mm Width: 700 mm Thickness: 230 mm Height on feet: 940 mm Weight: 0,8 T

Condition: used, Year of construction: 2012, machine number type model year clamping force distance between opening stroke screw shot volume tie bars diameter Gjdpfjzykzisx Aayebt ton mm mm mm cm3 1 2000-1450 S+ 2011 200 530x530 550 62 845 E-screwdrive 2 2000-850 S+ 2012 200 530x530 550 52 499 E-screwdrive 3 2000-850 S+ 2012 200 530x530 550 45 374 E-screwdrive 4 2500-850 S+ 2006 250 585x585 575 45 374 E-screwdrive 5 2500-1450 S+ 2009 250 585x585 575 62 845 E-screwdrive 6 3300-2150R S+ 2010 330 630x630 620 62 513 E-screwdrive 7 3300-5650 SXS 2006 330 630x630 620 84 1247 E-screwdrive 8 4400-3550 S+ 2010 440 730x730 720 72 1547 E-screwdrive 9 4400-3550 S+ 2010 440 730x730 720 72 1547 E-screwdrive 10 4400-5650R-2K SXS 2007 440 845x845 850 84 1247 E-screwdrive 11 4400-5650R-2K SXS 2007 440 845x845 850 84 1247 E-screwdrive 12 4400-5650R S+ 2008 440 730x730 720 84 1247 E-screwdrive 13 4400-5650 S+ 2009 440 730x730 720 84 2494 E-screwdrive 14 5500-5600 SXN 2000 550 830x830 850 98 3394 Hydraulic motor 15 5500-5650R 2K S+ 2009 550 830x830 850 84 1247 E-screwdrive 16 5500-5650R 2K S+ 2011 550 830x830 850 84 1247 E-screwdrive 17 6600-8650R S+ 2008 660 900x900 940 98 1886 E-screwdrive 18 6600EP-8650 S+ 2009 660 1000x1000 1200 115 5349 E-screwdrive 19 6600-8650R S+ 2010 660 900x900 940 98 1886 E-screwdrive 20 12000-19000 SXN 2003 1200 1200x1200 1500 150 12193 Hydraulic motor

Condition: used, Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, inclined conveyor, inclined conveyor belt, chip conveyor, chip conveyor belt -Sale / handover: in the current condition as viewed -Webbing: see photo for damage -Conveyor belt: Conveyor belt height adjustable / tiltable Gbsdpfohgr Rksx Aayet -Speed: 18.3 m / min -Height horizontal: 670 to 940 mm -Belt width: 380 mm -Transport dimensions: 1570/500 / H830 mm -Weight: 73 kg

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3225-CNC OT-41 Specifications - Nominal pressure: 2500 kN - Max working length 3200 mm - Throat depth: 400 mm - Max stroke: 250 mm - Daylight: 535 mm - Distance between side frames: 2500 mm - Max backgauge distance: 600 mm - Nominal motor power: 18.5 kW - Length: 3300 mm - Width: 1850 mm - Height: 2900 mm - Weight: 11700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning Gedjh Rdvajpfx Aaysbt So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: used, Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: HTT, heating element type 2132G311 Gedpfjh R Ny Ejx Aayebt -Power: about 12 kW 400 V -Bolt circle: Ø 145 x 18 mm -Immersion depth: 800 mm -Total dimensions: 940/185/185 mm -Weight: 13 kg

Condition: new, Year of construction: 2024, TP Turret Punch Presses With the Durma TP series of punch presses, you can achieve top quality with a precise and fast turret, improved hydraulics, and 3 automatic indexing stations. Featuring a movable table, partial unloading container, automatic clamps, CAD/CAM software, and a control unit, Durma turret punch presses are easy to operate. Automation systems that increase both work safety and productivity also enhance user safety while reducing downtime. Punching force: 30 tons Working area: 3,000+R x 1,500 mm X-axis travel: 3,000+R mm (adjustable) Y-axis travel: 1,500 mm Y-axis speed: 60 m/min X-axis speed: 70 m/min Combined X+Y speed: 92 m/min Max. stroke rate (in 1 mm increments, 1 mm sheet thickness): 1,100 strokes/min Max. stroke rate (in 25 mm increments, 1 mm sheet thickness): 325 strokes/min Max. marking speed: 1,200 strokes/min Main cylinder stroke: 40 mm Max. punching stroke: 25 mm Max. cutting capacity with fixed tool station (steel): 6 mm Max. cutting capacity with fixed tool station (NiRo): 3 mm Max. cutting capacity with indexing station (steel): 3 mm Max. cutting capacity with indexing station (NiRo): 1.5 mm Tool changer (27 stations without tools and holders): 11 x A-station fixed: 0.8-12.7 mm 11 x B-station fixed: 12.8 - 31.7 mm 2 x C-station fixed: 31.8 - 50.8 mm 1 x D-station fixed: 50.9 - 88.9 mm 3 x D-station indexing: 50.9 - 88.9 mm Positioning accuracy: +/- 0.1 mm Repeatability: +/- 0.05 mm Gbjdpfsg Admfox Aayjt Tool changer rotation speed: 22 rpm Auto-index rotation speed: 150 rpm Max. sheet weight: 200 kg Table height: 940 mm Air pressure: 6 bar Max. punching diameter (D-station): 88.9 mm Motor power: 7.5 kW Main dimensions: Height: 2,310 mm Width without light curtains: 6,300 mm Width with light curtains: 8,300 mm Length without light curtains: 6,650 mm Length with light curtains: 7,650 mm Weight: 19,500 kg

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-4016-CNC Delem DA-58T Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 1600 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1650 mm - Height: 2600 mm - Weight: 10700.0 kg Tools Gbjdpfetizavjx Aayet - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Year of construction: 1991, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1991 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 120 mm Rolling thickness 5x toproll Ø 150 mm Rolling thickness prebending 100 mm Top Roll Ø 910 + 820 + 740 mm Bottom Roll Ø 940 mm Side roll Ø 780 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll Gbodpfxjkwcc Ns Aayjt 200 mm/min. Adjustment side rolls 500 mm/min. Number of driven rolls 2 Power 300 kW Dimensions (Estimate) Length 8000 mm Width 5400 mm Height 5400 mm Weight 290000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on

Condition: ready for operation (used), Year of construction: 2007, The TAE evo 602/P3 chiller is a compact machine designed for use in industry (but not only), equipped with hermetic scroll compressors, a built-in ~3Bar pump and an innovative finned evaporator mounted inside a hydraulic buffer tank. Refrigerant is R407C. Designed to work in pressure (closed) systems but can works in open type circuits. Capacity ~110kW for +12/7°C and +35°C. We provide 3-month guarantee (concerns the area of Poland). The transport service is not included. Gbodjpuh Aqopfx Aayst

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350 x 200 saw band length 3375 x 27 x 0,9 mm band speed 18 - 110 m/min table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,61 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Gsdpfxjnq Sane Aayebt Figure is semi-automatic.

Year of construction: 2016, condition: good (used), Shelf tray, drip tray, floor tray, pallet tray, drip container, drip pallet Gedpfx Aaetzf Nqsyjbt -Manufacturer: Bauer, steel collecting tray, small container tray type KGW2 LB galvanized -Collecting volume: 25 liters -Material: S235JR sheet steel, galvanized, thickness 3 -Dimensions: 940/470/H60 mm -Weight: 21.5 kg

Condition: good (used), Used stainless steel pressure vessel / buffer tank Last use: Food industry Godpfx Aasihptusyebt Article number: 10539 Volume: 1000 liters Type: Standing on 3 legs Material (in contact with medium): 1.4571 / AISI316 Max. operating pressure: +2 bar Design: Single-walled Tank dimensions: Outer diameter: 900 mm Cylindrical height: 1460 mm Overall width: 940 mm Overall length: 1040 mm Overall height: 2000 mm Materials: Inside: 1.4571 / AISI316 External parts: 1.4301 / AISI 304 Equipment: Outlet diameter: 35 mm Distance from outlet to bottom: 50 mm Outlet valve: Ball valve Nameplate: no Sight glass

Year of construction: 2011, condition: like new (used), Universal Grinding Machine from Chevalier apply for toolmaker , mold maker, education and Locksmith Pressure: 60.0 t Square steel: 35.0 mm Pressure: 60.0 t Square steel: 35.0 mm Angle steel: 120x120x12 mm Round steel: 40.0 mm Punching cross-section in qmm: Ø28 in 15 / Ø38 in 11 mm Throat: 220 mm Flat steel: 200x20 / 300x15 mm Blade length: 317 mm Oil capacity: 45,0 ltr. Working height: 940 / 1140 mm Strokes per minute: max. 26 Gedpfx Aasiitwnoysbt Working stroke: 55,0 mm Total power requirement: 4.0 kW Machine weight approx.: 1425 kg. Dimension HxWxD: 1510 x 590 x 1570 mm

Condition: repair required (used), Year of construction: 2015, This is an used chiller with a nominal cooling capacity ~430kW. R134A refrigerant. This unit has a built-in pump, factory expansion vessel and Bitzer compressor inverter driven technology. Unit comes from our rental machine park. The shell and tube evaporator is completely leaky. Transport not included. Gjdsix Adbopfx Aaysbt

Condition: refurbished (used), Year of construction: 2013, The unit is equipped with scroll compressors. The refrigerant is R410A. Cooling capacity is approx. 600kW kW at water parameters +12/7°C and ambient temperature +35°C. The chiller is not equipped with a hydraulic module (no pump or tank). This unit comes from our rental fleet. Condensers were repaired due to leaks. Transport is not included in the price of the unit. We provide a 3-month warranty (applies to the territory of the Republic of Poland). Gbedpegaqn Iefx Aayjt

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3216-CNC Delem DA-58T Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2500 mm - Weight: 8700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included Gbedpfx Aasgih Iueyot - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3212-CNC OT-41 Specifications - Nominal pressure: 1250 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 120 mm - Daylight: 390 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 7.5 kW - Length: 3870 mm - Width: 1550 mm - Height: 2400 mm - Weight: 6700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist Gsdpfxsgi Dk Do Aayebt - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: like new (used), Year of construction: 2026, Special price for our demonstration machine Another machine, available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding residual wood of all kinds, including pallet sections. Pallets must be prepared with a saw or chainsaw so that they fit upright into the hopper – see image 2. Ideally, the dimensions should be approximately 40x20x20 cm so that the wood can lie flat on the sliding bed. This is when the machine operates most effectively. A hydraulic slide runs along the bottom of the shredder, pressing the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overband magnet available at an extra charge. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, can be rotated multiple times Optional double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening 630 x 820 mm Filling volume approx. 0.6 m³ Hydraulically operated slide Screen hole size selectable (10 - 30 mm) Gbodsdwktkjpfx Aayot Suction nozzle Ø 160 mm Weight approx. 1,300 kg (depending on accessories) Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm Moisture content: < 30 % dry basis Standard features include: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput performance - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Options for shredder: - Raise the shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Articulated conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Angle: Adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Extend hopper + €940 net - Eco-rings: + €1,980 net (recommended for more than 15% hardwood) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Requirements for raw material: - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: used, Technical details: total power requirement: 2,2 kW table-size: 500 x 780 mm working area: 250 x 250 mm height over floor: 940 mm voltage: 380 V / Hz Gbjdpfx Aju Icq Tjayjt Weight approx.: 0,642 t dimension machine xH: 1,0 x 1,3 x 1,2 m HYDRAULIC NOTCHING MACHINE On the table there are left and right 90° linear scales length 250mm stop bars length 400mm; angle adjustable left/right 90°) operated by switch button and/or hand/foot control incl. tool 2x upper and lower knives built in (knife length 250mm) *

Condition: new, range L-W-H 1700 x 485 x 950 mm weight 116 kg 6 St. Internal dimensions of the top drawer 1390 x 360 x 60 mm. Internal dimensions of the right second la 910 x 380 x 90 cm. Internal dimensions of the left 2nd, 3rd and 4th la 440 x 380 x 90 mm. Internal dimensions of the left fifth la 440 x 380 x 210 mm. Internal dimensions of the shelf behind the doors 940 x 450 x 390 mm. Wheel dimensions 150 x 40 mm. The thickness of the solid wood panel 40 mm. Packaging dimensions 153 x 49 x 96 cm. Gedpfx Aaeu Imfusyebt Weight 116kg.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, number of slots in tool magazine: 120, total height: 2,900 mm, table length: 400 mm, table width: 400 mm, coolant supply: 40 bar, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 80 m/min, rapid traverse Z-axis: 80 m/min, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, spindle speed (max.): 28,000 rpm, spindle speed (min.): 20 rpm, table load: 200 kg, operating hours of spindle: 39,945 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Scope of delivery: - HSC 55 machine - 3R-WorkMaster II pallet changer (automation) with all pallets - High pressure system / belt filter system (DMG) - Refrigeration unit (OLAER) - chip conveyor Excluded from delivery: - Vices - Tool holder Technical data of machine: - See attached OC (order confirmation) Godpfx Aaeu Ivkgeyjbt Technical data automation: - Available, on request.