Used Oce Plotwave 300 for sale (42,285)

Condition: like new (used), Cutter Manufacturer: Kilia Stainless steel Ibjdpfxjxrtyxo Ah Uef Capacity of the bowl: 50 liters 6 knives

Condition: excellent (used), TECHNICAL DATA This furnace system is for recrystallization, normalization, soft annealing, stress relief, annealing and conditionally suitable for soldering. belt width: 1000 mm working height: 300 mm (over belt) heated length: 4250 mm electrical heating power: 300 kW heating zones: 4 heating temperature: 900 – 1120°C belt speed: 6 – 60 m/h (continuously adjustable) nominal connected load: 310 kW natural gas consumption: 50 Nm3/h natural gas pressure: 30 – 50 mbar nitrogen consumption: 70 Nm3/h – on purging nitrogen pressure: 100 mbar emergency cooling water pressure: 4-6 bar furnace length: 25298 mm Ibodsgi Dv Dspfx Ah Usf furnace width: 2200 mm furnace height: 2800 mm exhaust gas quantity: 1200 m3 / h

Condition: ready for operation (used), Cable Dereeling Machine, Cable coiler, Cable Unwinder,Ramatech ABW 800/300 Cable dereeling machine, cable unwinder,Ramatech ABW 800/300, used machine Manufacturer: Ramatech Type: ABW 800/300 Overall dimensions: Width: 2270 mm Depth: 1120 mm Height: 2550 mm Iedpjxl R Duofx Ah Usbf Technical specifications: Maximum cable drum diameter: 800 mm Maximum cable drum width: approx. 650 mm Cable drum load capacity: 300 kg Power supply: 3 × 400 V AC + neutral conductor Operating direction: left to right

Condition: used, Year of construction: 2005, Technical details: screw size: 70 mm Ibodpewftr Djfx Ah Ujf injection shot weight in Polysterol: 687 g/PS closing pressure: 3000 kN weight of the machine ca.: 19,4 t PreHeating unit and airsoaking unit is not in package !! *

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 878 0643, clamping force: 3,000 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,090 g, total length: 6,500 mm, total width: 1,900 mm, total height: 2,300 mm, overall weight: 13,800 kg, pressure: 190 bar, pump power: 45,000 W, input frequency: 50 Hz, input voltage: 400 V, input current: 173 A, Equipment: documentation/manual, Machine: Demag Ergotech System Machine type: Injection moulding machine Clamping force: 3000 kN Screw diameter: 70 mm Stroke volume: 1212 cm³ Injection pressure: 1877 bar Shot weight: 1090 g Overall length: 6.5 m Overall width: 1.9 m Overall height: 2.3 m Total weight: 13,800 kg Pump output: 243 l/min Pump drive: 45 kW Installed total power: 64–72 kW Pressure: 190 bar Connection: 3 × 400 V, 50 Hz, 173 A Ibedpfjw U Dp Djx Ah Ujf

Condition: like new (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: Fabr.Nr. 2001777, year of last overhaul: 2019, Equipment: documentation/manual, Smo prvi lastnik; stroj je iz leta 2004 in je bil 2 leti uporabljen kot demonstracijska enota v njihovem obratu. Kupili smo ga leta 2006 in ga uporabljamo zelo redko, približno enkrat na mesec in niti ne vsak mesec. Stroj je izjemno dobro vzdrževan in je bil shranjen na suhem mestu v skladišču. Sestavljanje stroja je možno za doplačilo. Cena velja za razstavljen stroj, franko tovarna, skladišče prodajalca; nalaganje je možno tudi za doplačilo. Stroj ima 6 vložkov; eden omogoča vstavljanje knjig debeline do 3 cm. Vstavljate lahko tudi vizitke in druge predmete. Format embalaže je od A5 do B4, z avtomatskim podajanjem. Vredno ogleda. Prodajamo, ker smo podjetje zaprli in se je lastnik upokojil. Lsclqjxrhatokhx Herw Ibedpfx Ajxrhateh Usf

Year of construction: 2025, condition: new, Size reduction of large-volume blow molded parts as well as start and end pieces In a compact redesign, the best features of the proven GST and GSC series have been integrated, with special emphasis on weight, handling and energy efficiency. These compact granulators are equipped with complete sound insulation, resulting in extremely quiet operation. The granulators are available with 250 mm rotor diameters and widths from 300, 450 to 600 mm. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material jams. As with all ZERMA granulators, the rotor and stator knives are adjustable outside the machine, reducing downtime for maintenance. The highly tangential, curved rear wall of the cutting chamber, combined with the aggressive open rotor design, ensures reliable material pickup and minimizes the risk of jams. The compact granulators are suitable for use in blow molding operations. They are suitable for recycling e.g. voluminous parts such as bottles, canisters, crates. Due to the low feeding height, the machines can be easily fed with material by hand or by a small conveyor belt. The low noise emission and the small footprint make the granulator a perfect solution for inline size reduction Optional rear panel with higher stator knife M version: Ibodpfop Sr Anjx Ah Ujf The feed method with a higher positioned stator knife is better suited for thicker walled and more compact parts, such as injection molded parts, profiles, plates, etc. Due to the cutting geometry and the lower aggressiveness of the rotor, a high quality regrind is obtained regardless of the material type or shape, such as injection molded parts, profiles, plates, etc. Control system and control panel: The integrated control system and control panel not only comply with all applicable safety regulations, but can also be customized to meet specific requirements. In addition, peripheral equipment such as infeed conveyors, metal detection and unloading systems can be seamlessly integrated into the machine's control system. For improved efficiency, an optional intelligent energy saving function is also available that reduces power consumption during idle periods and can automatically start and stop the system based on the status of upstream machines. Standard configuration with blower, power consumption 0.75 kW and 400 er cyclone Rotor diameter (mm) 250 Rotor width (mm) 300 Drive (kW) 7.5 Number of rotor blades 3 x 1 Number of stator knives 2 Screen perforation (mm) > 6 Weight approx. (kg) 950 Feed opening (mm) 380 x 300 Feed opening option of M version (mm) 295 x 300

Condition: used, Year of construction: 1979, functionality: fully functional, Grinding wheel diameter: 600 mm Center width: 300 mm Ibodpfx Ahsrvybtj Uof Center height: 180 mm Headstock Counter holder with pressure cylinder

Year of construction: 1988, condition: ready for operation (used), I sell the flader orbital brushing machine. Ibsdpfx Ahef Rth To Ujf Model Quickwood Fladder Working width 1060mm Mechanically adjustable rotation and feeding speed. Suitable for rustical brushing and patina surface. Profiles possible. Made in Denmark Hansen - Hundebol AS

Year of construction: 1991, condition: ready for operation (used), Groove width range: 2mm-32mm, max. ram stroke: 300mm, stroke rate: 300 strokes/min, max. installation height: 450mm, feed: 0.01mm-0.15mm, working speed: 30m/min, return speed: 30m/min, machine dimensions X/Y/Z: approx. 2500mm/1500mm/2200mm, weight: approx. 2200kg, control: fk electronic Dialog CNC. On-site inspection is possible. Iedpfx Asu D Aagsh Uobf

Condition: used, empty load weight: 650 kg, maximum load weight: 2,350 kg, overall weight: 3,000 kg, axle configuration: 2 axles, first registration: 08/1991, loading space length: 2,970 mm, loading space width: 1,500 mm, loading space height: 400 mm, suspension: steel, tire size: 185R14C, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, tandem, leaf suspension, flap, front support Iodji Rlb Eepfx Ah Uobf Body: Tandem low loader trailer with aluminum drop sides and aluminum access ramp Loading height approx. 600mm! Ramp length approx. 1500mm! AL-KO axles! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: good (used), Size: max 480 x 325 mm Size untrimmed with lap: max 480 x 325 mm, min 90 x 115 mm Size untrimmed without lap: max 440 x 300 mm, min 158 x 115 mm Size trimmed with lap: max 470 x 320 mm, min 148 x 105 mm Size trimmed without lap: max 430 x 295 mm, min 148 x 105 mm Speed max: 14.000 c/h Power requirements: 11-18 kW (220/380V, 50Hz) Equipment gathering chain & feeder • 7 station gathering track & chain • 4 double base • 6 feeders 345 • 1 cover folder feeder 1529 stitching unit • stitching unit 300 • wire unwind device • thickness control/ plus-minus • 2 stitching heads HK 75 three knife trimmer • three knife trimmer 251 knives • 2 sets of knives delivery • belt delivery standard accessories • 1 set of operator manuals • 1set of electrical diagrams • 1 spare part catalogue Isdpfok D Ah Usx Ah Uobf • 1 set of tools further information • location: D- Braunschweig • next airport: Germany-Hannover • condition: very good

Condition: new, Year of construction: 2025, Slow-running mill for storage Rotor diameter (mm) 180 Rotor width (mm) 300 Rotor speed (rpm) 150 Drive (kW) 4 Number of rotor blades 30 Number of stator blades 2 Screen perforation (mm) >5 Ijdpfst Aam Hox Ah Uebf Approx. weight (kg) 180 The slow-running mills of the GSL 180 series have a rotor diameter of 180 mm and working widths from 120 to 430 mm. The rotor is driven directly by a gear motor. The low rotor speed ensures a pleasant noise level and a high-quality product. The special rotor blades can be resharpened several times, eliminating the need for complex adjustment work. The mills are fed via a noise-reducing sandwich-type hopper. Depending on the task, the machines can be equipped with various hopper variants. Low and high base frames are available as options. The ground material is either vacuumed or filled into bags or a plastic container. Good accessibility for simple and quick maintenance work is ensured by the Quick Snap locking system.

Condition: used, Year of construction: 1979, Intake diameter: 300 mm Discharge diameter: 300 mm Flow rate: 5400 m³/h Ibodpfx Ahjwm Nrvs Ujf Motor power: 2.5 kW Weight: 100 kg

Condition: ready for operation (used), Year of construction: 2018, operating hours: 17,000 h, functionality: fully functional, machine/vehicle number: 222866, clamping force: 3,000 kN, screw diameter: 70 mm, displacement volume: 1,120 cm³, overall weight: 7,100 kg, TECHNICAL DETAILS Clamping force: 3,000 kN Screw diameter: 70 mm Shot volume: 1,120 cm³ MACHINE DETAILS Iodpfxow N In He Ah Usbf Weight: 7,100 kg Operating hours: 17,000 hours EQUIPMENT Barrier screw with homogenizing unit and mixing head Cleanroom suitability

Year of construction: 1980, condition: good (used), - Horizontal sieves - 30 filter plates - Filter area : 6 m2 - Max, operating pressure : 6 bar Isdpfx Aomn I Nxjh Ujbf - Capacity : 30 - 120 hl/h - With semi-automatic cleaning Dimensions : - Length : 1800 mm - Width : 850 mm - Height : 2000 mm

Year of construction: 2023, condition: new, functionality: fully functional, Zerma cutting mill type GSL 180/300 Iodsr E Aqvepfx Ah Uobf IE motor 4.0 KW, 400V, 50 Hz Rotor diameter: 180mm, rotor width: 300mm Rotor knives: 30 pieces, stationary knives: 2 pieces low version, on wheels Standard - hopper Screen insert: Ø >5mm round

Condition: ready for operation (used), Size: max 480 x 325 mm Size untrimmed with lap: max 480 x 325 mm min 90 x 115 mm Ijdpfx Ahod N D Nwe Usbf Size untrimmed without lap: max 440 x 300 mm min 158 x 115 mm Size trimmed with lap: max 470 x 320 mm min 148 x 105 mm Size trimmed without lap: max 430 x 295 mm min 148 x 105 mm Speed: max 14.000 c/h Power requirements: 11-18 kW (220/380V, 50Hz) Equipment gathering chain & feeder: • 5 station gathering track & chain three knife trimmer: • three knife trimmer 251 • compensating stacker CS-20

Year of construction: 2005, condition: ready for operation (used), Zig-zag fine material separator Cross section: approx. 500 / 300 mm Ibjdpfx Ahef Rlc Ds Ujf For the separation of fines from the regrind Equipment: 2x rotary valve type NU 250 With Vulkollan seal, each 0.37 kW, 1x material conveyor blower type MFT 75/500, 11 kW

Condition: new, 6GK7343-1GX30-0XE0 / 6GK73431GX300XE0, Siemens Communication Processor - New Ijdpjq S Sdwjfx Ah Uebf Model: 6GK7343-1GX30-0XE0 Condition: New

Year of construction: 1987, condition: good (used), - Year of construction: 1987 - Horizontal sieves Ibodpst Igd Nefx Ah Usf - 30 filter plates - Filter area : 6 m2 - Max, operating pressure : 6 bar - Capacity : 30 - 120 hl/h - With semi-automatic cleaning - Dosing pump replaced in 2017 - Machine in good condition Dimensions : - Length : 1800 mm - Width : 850 mm - Height : 2000 mm

Condition: good (used), Rebuilt: 2015 Size: 480 x 325 mm Speed: 14.000 c/h Equipment: gathering chain & feeder: • 7 station gathering track & chain • 6 feeders 345 • 1 cover folder feeder 1528 stitching unit & trimmer: • stitching unit 300 • 2 stitching heads HK 75 • three knife trimmer 251 • 2 sets of knives delivery: Iedpfx Ahjdympcj Uobf • belt delivery

Condition: as good as new (ex-display), Hammer mill Manufacturer: NEUE HERBOLD Type HM 450 / 300 Drive: 18.5 kW - show room machine - Ibodpfobxadnsx Ah Ujf crushing of brittle plastics such as electronic scrap, wood scrap, and organic insulation material.

Condition: used, CX5130-0155 / CX5130 0155 / CX51300155, Beckhoff embedded PC with Intel® Atom™ processor Model: CX5130-0155 Condition: Used Ibodpeq S Uhiofx Ah Usf

Year of construction: 1988, condition: used, 480 x 325mm; 14,000c/h; Isdpfxjbnczbo Ah Uobf 7 stations 6 feeders 279 Card gluer 1 folder feeder 1529 Stapling station 300 Trimmer