Used Oil Mist Collector for sale (7,070)

Condition: ready for operation (used), Year of construction: 2018, An unused above-ground double-walled tank for heating oil is available. Nominal capacity: 20000l, tank diameter: 2000mm, overall length: 6860mm, weight: approx. 3750kg. The tank has not been filled and is as clean as on delivery. Documentation available. An on-site inspection is possible. Hnsdpfxex El Abj Aqisr

Condition: ready for operation (used), Year of construction: 2022, An above-ground double-wall heating oil and diesel tank Kammerer is available. Volume: 5m³, length: 4350mm, outer diameter: 1256mm, weight: approx. 1100kg, monitoring space volume: approx. 50l, test overpressure tank/interstitial space: 2bar/0.6bar, material: S235JR, heating oil extraction fitting: Euroflex 3, length: 2150mm, max. flow rate: 150l/h, tank heating dimensions X/Y: 646mm/47mm, limit value sensor: 23 RO. Documentation available. On-site inspection is possible. Hnodpfx Aoyg Nucoqijr

Condition: not inspected (used), 7m x 1000mm thermal oil fryer with top hold down belt. Has come from factory producing chicken burgers and nuggets for major fast food chain. 7m frying length, 1000mm belt width. Hnedpjigruysfx Aqior

Condition: not inspected (used), 7m 600mm thermal oil fryer with top hold down belt. Has come direct from production. 7m frying length, 600mm belt width. Electric canopy hoist. Hnedjht Hgnspfx Aqijr

Condition: good (used), Oil-water separator with pre-separation Tank volume (liters) 228.4 Compressor capacity, max. m³/min 58.5 Condensate inlet connection 3 x G1/2, 1 x G1 Filling volume in liters 158.8 Hnsdpfx Aqog Db R Ajier Filter capacity in liters 1 x 37.2 / 1 x 40.3

Condition: used, Continuous fryer. Thermal oil heated, Teflon infeed etc. In nice condition but needs new control screen and plc. Hjdpfx Aqoyivr Teijnr

Condition: good (used), Oil storage tank with level gauge and ancillaries. 3500 litres. Has been used with a continuous fryer to store the oil when it is emptied. Model VTC3500 is the same as OLT3500. Hnsdon Upivspfx Aqier

Condition: good (used), Direct from closed food factory. Dimensions to follow. Hodpfxjtp Nz Ej Aqienr

Condition: used, Lubrication pump, oil pump for central lubrication, lubrication unit Central lubrication pump, oil pump for central lubrication, hydraulic pump, oil central lubrication pump Manufacturer: BEKA Schmiertechnik / Baier & Köppel, Pegnitz Type E-812 / ES0.5 Year of manufacture: approx. 1990 Flow rate: 0.4 l/min Operating pressure: 15 bar Tank capacity: approx. 3 liters Motor power: 0.09 kW Motor speed: 2730 rpm Current consumption: 0.4 A Power supply: 400 Volt, 50 Hz Dimensions L x W x H: 280 x 150 x 380 mm Weight: 8.5 kg Good condition Hnodpszpbq Hjfx Aqior 2 units available Price stated per unit

Condition: ready for operation (used), Year of construction: 2015, Length: 9401mm, width: 2091mm, height: 5668mm, weight: 8.816t, with pipes and documentation, the dust collector was not used much. Hjdjk Ea Uuepfx Aqienr

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Hsdexy Tmujpfx Aqisnr

Condition: good (used), Line to produce Chinese and Japanese style chilli oils, has been producing Chinese style chilli oils for Chinese supermarkets, restaurants and cash and carry's. #chillioil Hnsdpfx Aqsrzblboijr

Condition: good (used), Standard radiator, car radiator, oil cooler, heat exchanger Hedpfxezk Etbo Aqienr -Oil cooler: Heat exchanger, without fan -Type: unfortunately no type designation -Pressure: max. 20 bar -Temperature: max. 120 °C -Dimensions: 270/130/H260 mm -Weight: 4.4 kg

Condition: reconditioned (used), WOERNER or BOSCH lubricating oil pumps with 8 to 14 pump elements and oscillating drive, oil delivery rate individually adjustable for each pump element Hodsxl Aaujpfx Aqijnr

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Storage location: Garbsen Hodpfx Aevvizkjqienr

Condition: good (used), mileage: 781,759 km, power: 132 kW (179.47 HP), first registration: 10/2007, fuel type: diesel, tire size: 245 / 70 / R17.5, axle configuration: 4x2, wheelbase: 5,550 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro4, suspension: steel-air, number of seats: 2, total length: 10,040 mm, total width: 2,480 mm, total height: 3,850 mm, permissible axle load (axle 1): 4,400 kg, permissible axle load (axle 2): 8,400 kg, loading space length: 8,010 mm, loading space width: 2,380 mm, loading space height: 2,630 mm, Year of construction: 2007, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, spoiler, Technical information Number of cylinders: 4 Engine capacity: 4.580 cc Transmission Transmission: ZF, 6 gears, Automatic Axle configuration Tyre size: 245 / 70 / R17.5 Make axles: MAN Brakes: disc brakes Front axle: Max. axle load: 4400 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50%; Suspension: leaf suspension Hsdpfx Ajzmmn Eeqijnr Rear axle: Double wheels; Max. axle load: 8400 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 6.830 kg Carrying capacity: 5.160 kg GVW: 11.990 kg Functional Make of bodywork: Karsmakers Canvas Box Interior Interior: grey Condition Technical condition: average Visual appearance: good Number of keys: 2 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Low-noise - Radio/CD player - Reversing camera - Spare wheel - Speed limiter - Spoilers - Stability control - Visor

Condition: new, Year of construction: 2025, Holzkraft Dust Extraction System RLA 210 For wood dust and shavings, designed for commercial use Article number: 5132100 Brand: Holzkraft Dimensions and Weights Chip collection volume: 2 x 165 l External diameter of the suction nozzle inlet: 200 mm Length approx.: 1755 mm Width/Depth approx.: 830 mm Height approx.: 1800 mm Weight approx.: 259 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 22 m² Noise Emission Maximum sound pressure level: 72 dB(A) Volume Flow Nominal volume flow: 2262 m³/h Dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with a small footprint Maximum performance in this class Very quiet Hnsdpfx Aohk Dfrjqior All models with a collision guard Application Area Designed for commercial use For all woodworking machines with a corresponding suction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Suction nozzle can be easily repositioned from left to right, allowing for flexible use Large inspection openings Large-sized, mobile chip containers with a clamping bracket and chip collection bag Dust extractor is completely assembled upon delivery, allowing for quick deployment All models are mobile For model RLA 210: Optimal chip distribution into the chip containers due to large filter area Description of the Filter Ultra-compact with maximum filter area Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life Filter is standard, antistatic, tested and approved according to category M-BIA Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control box The fan is located downstream of the filter Equipment Details With a novel locking device for secure container positioning Location: In stock at warehouse 54634 Bitburg - available for immediate delivery -

Condition: new, Year of construction: 2025, AL-KO Colour Jet 1 Paint Mist Extraction System Paint mist extraction system, ready for operation, with a 1 m² filter area including a pre-filter and a fine filter. Connection diameter: 300 mm, motor: 1.5 kW (suitable for installation in Zone 22 according to ATEX), switch: 1-stage, plus a 5 m cable with plug and throttle valve. Compact, space-saving steel sheet construction. Chassis with wheels. Indirect extraction near the floor. Completely pre-assembled. With connection cable and phase reversal device. Adjustable side panels. Optimized spray mist extraction through a patented front panel hood. Long filter life. High-performance fans with low noise levels. Filter wall with special mats. Exhaust nozzle with integrated throttle valve. Motor power: 1.5 kW Speed: 1400 rpm Nominal volume flow: 4600 m³/h Pressure: 500 Pa Dimensions (W*H*D): 1025*1437*1214 mm (W = 2000 mm with side panels) Hnsdpfxjbumr Se Aqier Filter area: 1 m² Weight: 175 kg

Condition: excellent (used), Year of construction: 2021, Technical data: ALKO clean air mobile extraction unit, Hsdpjw T U Uzsfx Aqisnr Type: Mobil-Power Unit APU 120, Motor power: 1.5 kW, Inlet diameter: Ø=120 mm, Sound insulated, Mobile separation drum: 135 l, Manual filter cleaning, Dimensions: L=1,085 mm, W=650 mm, H=1,985 mm, Dust drum volume: 135 liters, Weight: 117 kg, Nominal airflow (after cleaning): 814 m³/h, Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Clean Air Dust Extractor: RLA 140 For wood dust and shavings, designed for commercial use Item number: 5131400 Brand: Holzkraft DESCRIPTION Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic shavings High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip container with clamp and chip collection bag Dust extractor already installed upon delivery Fully assembled, allowing for quick deployment. All models are mobile. Model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface. Filter Description Ultra-compact with maximum filter surface. Filter material made of aluminum-coated polyester fleece, thus offering a long service life. Filter tested and approved as standard in antistatic design according to category M-BIA. The fan is installed downstream of the filter. TECHNICAL DATA Dimensions and Weights Length (product) approx. 1241 mm Width/Depth (product) approx. 830 mm Height (product) approx. 1750 mm Net weight approx. 210 kg Chip collection volume 165 l Nominal diameter of the extraction nozzle inlet: 140 mm Axis of the extraction nozzle to the floor: 850 mm Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Efficiency class of the extraction motor IE3 Hedpev Sk Tmefx Aqijnr Drive motor power: 2.2 kW Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Manual filter cleaning Noise emission Max. sound pressure level: 71 dB(A) Flow rate Nominal flow rate: 1108 m³/h Max. flow rate: 1750 m³/h SCOPE OF DELIVERY Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning

Condition: used, Year of construction: 1998, functionality: fully functional, cooling capacity: 3.3 kW (4.49 HP), input voltage: 400 V, input frequency: 50 Hz, Oil cooler - Flow oil cooler D20V D30V 2 flow oil coolers - coolant system for machine cooling - individual sale possible. Two stand-alone flow oil coolers / circulation coolers for cooling oil / hydraulic oil from Wöhr Kältetechnik for cooling / temperature control of the coolant circuit or hydraulic system on machine tools, with integrated circulation pump and flow monitor. Control cabinet integrated in the housing with connection cable, LAE temperature controller MTR11 and potential-free alarm contact in case of malfunction. The integrated circulation pump is a gear pump. The cooling units are suitable for clean oil. Instructions for programming the temperature controller are available. Both coolers are in used condition. Cooling unit. Wöhr flow oil cooler, type D 20 V, Year of manufacture 1998, serial no. 98101582, cooling capacity 2 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with Walter Procon connection plug (cooler was installed on the hydraulics of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 1.7 kW. Flow oil cooler D 30 V Hnsdpfx Aog U H E Soqijr Wöhr flow oil cooler, type D 30 V, year of manufacture 1998, serial no. 98101583, cooling capacity 3.3 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with CEE connection plug (cooler was installed on the grinding oil supply of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 2 kW. The oil coolers and oil cooling system are in used condition and well maintained. Price negotiable. Our asking price per unit is €1,950.00 net ex works, plus packaging costs. Subject to typographical errors and omissions in all technical data. We only sell to countries within the European Community.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, INORON CLINER C 351 Mobile washing station with oil separator and high-pressure cleaner Completely self-sufficient, no permit required, suitable for oil- and emulsion-containing tools or products. Like new condition; can be inspected on-site. Hsdpfxezq T Aqj Aqijnr For further information, please contact me.

Condition: used, Year of construction: 1998, OVERVIEW This ABC 4HA-4-LT high-pressure reciprocating air compressor, manufactured in 1998, is designed for the supply of compressed air in PET bottle blowing applications. The compressor is manufactured by ABC – Arizaga, Bastarrica y Cía S.A. from Eibar, Spain. The machine is a 4-stage reciprocating compressor with oil-free cylinder compression design and a nominal pressure of 42 bar. It is belt-driven. The compressor is mounted on a structural steel skid and includes interstage piping, pressure monitoring, cooling water connections, main drive motor, belt-drive safety guard and integrated control cabinet. The machine is equipped with an analog pressure gauge panel showing the final stage, intermediate stages and oil pressure. The control cabinet is fitted with status lamps for temperature, water, oil, thermal relay and dryer fault indications, as well as an hour meter and emergency stop.   TECHNICAL DATA - Manufacturer: ABC – Arizaga, Bastarrica y Cía S.A. - Manufacturer Location: Eibar, Spain - Model / Type: 4HA-4-LT - Machine Type: High-pressure reciprocating air compressor - Year of Manufacture: 1998 - Application: High-pressure compressed air supply for PET bottle blowing - Compression Design: Oil-free cylinder compression - Number of Compression Stages: 4 stages - Nominal Pressure: 42 bar - Regulation Air Pressure: 8 bar - Suction Pressure: Not specified - Flow Rate: approx. 546.9 m³/h - Compressor Speed: 725 rpm - Motor Power: 150 CV / 110 kW - Total Power to Install: 158 HP / 115 kW - Transmission: Belt-driven - Power Voltage: 380 V - Control Voltage: 220 V - Frequency: 50 Hz - Cylinder Diameter, 1st Stage: 250 mm - Cylinder Diameter, 2nd Stage: 160 mm - Cylinder Diameter, 3rd Stage: 105 mm - Cylinder Diameter, 4th Stage: 75 mm - Piston Stroke: 150 mm - Cooling System: Water-cooled - Cooling Water Flow Rate: approx. 6.5 m³/h - Ambient Temperature Range: 0 – 40°C - Cooling Water Temperature Range: 5 – 40°C - Compressor Weight: approx. 2,900 kg - Motor Weight: approx. 830 kg - Complete Equipment Weight: approx. 7,230 kg - Pressure Gauges Observed:Final stage: approx. 42 bar 3rd stage: approx. 16 bar 2nd stage: approx. 6 bar 1st stage: approx. 2 bar Oil pressure: approx. 3.5 bar - Control Cabinet: Integrated electrical control cabinet, marked T2/7 - Operator Elements: Status lamps, analog hour meter and emergency stop - Status Indications: Temperature, water, oil, thermal relay and dryer fault - Safety Equipment: Belt-drive / flywheel safety guard and emergency stop - Construction: Green painted multi-stage compressor on structural steel skid - Additional Equipment Observed: Interstage header pipework, vertical separator / receiver vessel and overhead piping Hnodpfeziawrjx Aqior - Certification: CE-marked - Condition: Used, installed in industrial production environment

Condition: used, Year of construction: 2009, Overview  This oil separator was manufactured in 2009 by the German company Donaldson Filtration GmbH. The UFA-AC0016M model was part of a compressed air installation operating with two Atlas Copco GA132 VSD low-pressure compressors. The unit is still installed and connected, has been maintained regularly, with the latest maintenance completed in August 2025, and is immediately available for sale. It can be visited on request. Technical data  - Air operating pressure: 5.5 – 8.5 bar - Water operating pressure: 3 – 5 bar - Condensate operating pressure: up to 10 bar - Operating temperature: 4 – 70 °C Hnodpfoyb Th Aex Aqisr

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 400 t, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Hjdpfxoph Uk No Aqisnr Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)