Used Paint Mist Extraction for sale (9,579)

Condition: excellent (used), Unit with supply air heating in excellent condition Gedpfjxpg Dxex Abdebg

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Gbjdjvvizkjpfx Abdjg Storage location: Garbsen

Condition: new, Year of construction: 2025, Paint mist extraction AL-KO colour Jet 1 Paint mist extraction ready for use, 1 m2 filter surface with pre-and fine filter,. Connection diameter 300 mm, motor 1.5 KW ex (suitable for setting up In zone 22 according to ATEX), switch 1 step + 5 m cable with Plug and Throttle body. Compact space-saving design of sheet steel Chassis with wheels Indirect exhaust near the ground Fully assembled With connecting cable and phase change Setup Adjustable side panels Optimized spray mist recording by patented front sheet cover Long filter service life High-performance fans with low noise level Filter wall with special mats Exhaust socket with integrated butterfly valves Motor power: 1,5 KW Speed: 1400 RPM Nominal flow rate: 4600 m3/h Pressure: 500 PA Gbodpfxebumr Se Abdog Dimensions: (W * H * D) 1025 * 1437 * 1214 W = 2000 mm with side panels Filter surface: 1 m2 Weight: 175 kg

Condition: excellent (used), Mobile paint mist extraction unit With side air baffles Gbodstk H Nyopfx Abdog Built-in fan

Condition: used, Year of construction: 2023, functionality: fully functional, For sale due to purchase of a larger system! Was only in operation for 1 year and was covered with cardboard. See photos. Godoxtucdopfx Abdjbg

Condition: used, Paint mist extraction, water irrigated system - Producer Reinox - Type WW 25/22 - Width 2.600 mm - Height 1.700 mm (2.250) mm - Depth 1.640 mm - Required space 2,75 x 2.45x1,65m mm - With irrigated exhaust system - With water circulating pump - Motor power 4,2 kW - Exhaust pipe 2 x 350 mm - With switch cabinet - In stainless steel - Voltage / HZ 400 / 500 - Location on stock - Voltage fluctuation max. +/- 5 % Gbodpfx Abjumvtqedsg

Condition: used, Year of construction: 1990, Motor power: 1 kW Gbjdpfxewv Nbce Abdog Filter area: 2500 mm x 1600 mm Exhaust connection: 300 mm Power consumption: 2.3 A Weight: approx. 120 kg

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Connected load 4kW 1 pc. switch cabinet pipe connection 350 mm length 2000 mm, width 700 mm, height 1950 mm lateral baffles Gedpfx Abeiau Tzedobg 1 pc. suction pipe D= 350 mm 3900 mm long 1 pc. bend 90° 350 mm 1 pc. Elbow 45° 350 mm deflector hood 350 mm Circuit diagram, operating instructions Return air system Air capacity max. 6500 m³/h motor power 2 kW with heat exchanger 1" water connection LxWxH 2150x820x820 mm 2 pcs. return air duct 2000x950x400 mm 1 pcs. return air duct 950x950x400 mm external wall connection 700x700 mm bird grille 660x590 mm heat exchanger outlet 400x400 mm Unfortunately, we cannot answer inquiries without complete contact information.

Condition: ready for operation (used), Year of construction: 1997, A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible. Gbjdpfxswydgze Abdsg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, volume flow: 6,000 m³/h, filter area: 4 m², total length: 2,000 mm, total height: 2,000 mm, overall weight: 300 kg, power: 2 kW (2.72 HP), pipe diameter (max.): 400 mm, Paint mist extraction wall, spray wall, exhibition device, paint area approx. 2,000 x 2,000 mm, incl. side baffles, motor in ATEX version - immediately available - Gbodpfxjwrnype Abdeg

Condition: new, In addition to pigments and additives, wet paints also contain other harmful substances that must be extracted without fail. AL‑KO COLOUR JET extraction units are the ideal solution here, offering four performance levels to ensure sufficient capacity at all times. Gsdpfx Aowv T R Uebdobg The devices in the COLOUR JET series are optimally designed for the extraction of paint mist and solvents at wet painting workstations. The front guide plate ensures collection of emissions from below and at the side inlets, as solvents from paints settle and accumulate near the floor. At the same time, the guide plate ensures uniform air distribution across the filter and protects the filter medium from direct impact. Paint pigments are separated out via the large-area exchangeable filter, and the cleaned exhaust air is then routed outdoors via a pipe or hose. Applications: - Wet painting workstations in trade, industry, and workshops - Painting stations with ATEX Zone 2 Advantages: - Clean and safe painting workstations thanks to high extraction performance and an effective filtration system - Flexible use due to mobile design - Cost-effective and powerful, in many cases a substitute for a closed spray booth - Safety via certification for use in potentially explosive atmospheres (ATEX Zone 2) - Individually adaptable with a wide range of accessories

Condition: ready for operation (used), Year of construction: 2011, operating hours: 1,550 h, functionality: fully functional, Paint mist extraction wall with dry separator Complete supply air system with exhaust, control cabinet, lighting, and piping inside and outside Hot water heating coil Spray booth control with touchscreen 2 x 2.0 kW drive power 6000 m³/h air volume flow Year of manufacture 2011 From carpenter workshop closure / retirement, IN GOOD CONDITION ex workshop Gbodpfjxltm Sjx Abdjg

Condition: new, - Mobile design - high degree of separation, high extraction performance - easy to handle - long filter service life, Gedpeu T Hrpjfx Abdebg therefore little downtime - more flexible thanks to extraction technology with front plate system - certified for ATEX Zone 2 ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve

Condition: excellent (used), Servatechnik extraction Gsdox Nbnnjpfx Abdjbg

Condition: used, Year of construction: 2018, Available after usable area: 1900x1800 mm. Side panels: yes. Top plate: yes. Volume flow: 6000 m³/h. Explosion-proof motor: yes. Filter material: with cardboard. Installation: stationary. Extraction type: dry. Deflector hood: yes. Motor power: 3 kW. Extraction diameter: 350 mm. Storage location: Gsdpex Rdlrofx Abdobg

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr231316, Technical Data – Used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2012 Extraction capacity approx. 500 m³/h Motor output approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W x D x H) Filter stages 1. Pre-filter F5 2. Centrifugal separator 3. Post-filter F5 (optional: HEPA H13) Filtration efficiency 99 % at ≥ 1–2 µm (F9), optional HEPA 99.95 % at ≥ 0.1 µm Noise level approx. 65 dB (model WS2 similar) Accessories & Features • Compact design for installation directly on or next to CNC machines • Stand for extraction • Three-stage filtration for efficient oil and coolant mist separation • Cartridge filter optionally upgradable with HEPA kit • Easy maintenance, low-noise operation, and durable filter elements Godsx Hh Tljpfx Abdsbg Technical data and information subject to change and error. Prior sale reserved!

Condition: used, Year of construction: 1996, Used machine Year of manufacture: 1996 Features and technical data: - Berkmann extraction systems operate on the principle of displacement flow, meaning that a negative pressure is created on the wall side of the room, while an overpressure is generated on the opposite side by the supply air unit. - Almost the entire room air flows in a directed and low-turbulence manner from the supply air side toward the exhaust air side. - Paint mist generated within the flow area is captured and discharged. - With Berkmann extraction systems, air is extracted across the entire area, not just in the collection zone in front of the spray wall as with conventional systems. - This allows larger components to be painted as well. - It is also not necessary to work directly in front of the extraction unit. - The patented 'gap extraction' enables high extraction velocities at all sides (including at floor level, where solvents accumulate). - Due to the special arrangement, extremely large filter surfaces could be accommodated, resulting in very long filter service lives. - Compared to traditional spray booths, Berkmann extraction systems operate with significantly lower air volumes, enabling energy savings of up to 50%. - Includes paint mist extraction unit BASIC 7000 m³/h - With supply air unit - With solvent evaporation unit - System is installed underground with grating cover - Dimensions of grating approximately 3,500 x 3,400 mm - Filter area of the unit: approx. 3.7 m² - Supply air unit approx. 82 kW, type 3072 FL/WW (two-stage) - Solvent evaporation unit approx. 3,000 m³/h exhaust air volume - Motor 1.1 kW Gbedexwz H Rspfx Abdsg - With supply air duct system featuring 4 large-area filter ceilings with explosion-proof lights - With control cabinet featuring microprocessor control - With used Kremlin paint application unit Price excludes dismantling, removal, and collection on site Availability: approx. mid-April 2026 Location: Hesse

Condition: used, Year of construction: 2015, operating hours: 5,231 h, functionality: fully functional, machine/vehicle number: 2015019, type of input current: three-phase, overall weight: 1,590 kg, input voltage: 400 V, total width: 1,756 mm, total length: 2,066 mm, total height: 3,643 mm, power: 15 kW (20.39 HP), input frequency: 50 Hz, Equipment: oil mist separator, type plate available, Oil mist extraction from the workshop, plug & play filter tower for extraction during emissions of coolant lubricants in production halls. Filter ventilation tower IVAT Air FTower 20,000M. Ideal for aerosols, oil mist, emulsion mist and vapors. Industrial hall filtration ventilation – suitable for various technical manufacturing processes in production facilities, primarily in metalworking. Gbjdexqf Hzepfx Abdsg In many cases, the extraction systems installed directly on machines for coolant recovery are either insufficiently efficient or not installed at all. Setup operations on machine tools, frequent opening of machine enclosures, or missing covers on machining heads can result in oil mist escaping from the machine area and reaching work zones, where employees are exposed to harmful mists and vapors. Installing a ventilation tower significantly improves air quality at workstations and should be considered the ideal complement to industrial hall filtration ventilation – especially where complete separation of oil mist via coolant recovery systems is either not possible or difficult to implement. Includes automatic room air and temperature monitoring. An innovative PLC control system compares sensor data and detects any exceedance of thresholds at workstations or increased temperature directly at the hall ceiling, then fully automatically regulates temperature and air quality. Filters are barely used, see images. Price ex works, pick-up only.

Condition: new, Year of construction: 2025, functionality: fully functional, Fenice Plain Spray Booth Wall Brand new Available options: Plain-2000mm net price 17,800 PLN Filtration capacity 8,000 m3/h Motor power 1.5 kW Plain-3000mm net price 21,500 PLN Filtration capacity 11,000 m3/h Godpexz Achofx Abdobg Motor power 2.2 kW Plain-4000mm net price 25,800 PLN Filtration capacity 15,000 m3/h Motor power 4.0 kW Plain-5000mm net price 34,000 PLN Filtration capacity 16,500 m3/h Motor power 5.5 kW Plain-6000mm net price 38,000 PLN Filtration capacity 22,000 m3/h Motor power 2.2 kW + 2.2 kW Custom sizes available on request

Condition: good (used), Painting booth with suction device and cabinet Article: Spray booth with extraction unit and cabinet Dimensions spray booth: 72 cm wide, 60 cm deep and 80 cm high Cabinet dimensions: 72 cm wide, 109 cm deep and 100 cm high Number of drawers: 6 Colours: green and black Condition: used  Complete factory locker, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! Gjdpfxsg I Dhgs Abdobg International shipping costs on request!

Condition: good (used), Year of construction: 2018, machine/vehicle number: 18-1427, Offer 24500 Technical Specifications Gbsdpswdvthsfx Abdjg - Upright design for extracting welding mist and grinding dust - Exhaust air can be vented into the work area or outside - BGIA M – Class - KOMPAKT 3000 control system - Air flow rate approx. 28,000 m³/h - Max. static pressure 4,000 pa - Efficiency > 99.9% - 6 cartridge filters - Filter area 6 / 150 m² - Jet Pulse filter cleaning - Dust container 40 L - Compressed air connection 6 to 8 bar - Drive - Fan 400 V / 5.5 kW - Space requirement approx. W 1900 x H 3600 x D 1600 mm - Weight approx. 990 kg - Operating hours readout 11,216 h

Condition: good (used), Year of construction: 2013, machine/vehicle number: 1305, Offer 21369 Technical Specifications - 4-stage oil mist separation - Electrostatic air filter with filter elements - Pre-separation with washable pore filter Gjdpfxjv I Tfde Abdjbg - Fine filtration with compact filter - HEPA filter (H 13) - Air flow rate approx. 4000 m³/h - Extraction pipe diameter 315 mm - Drive - Fan 400 V / 3 kW - Space requirement approx. W 750 x H 2900 x D 750 mm - Weight approx. 500 kg

Condition: good (used), Year of construction: 2018, machine/vehicle number: 18-426, Offer 24497 Technical Specifications - Upright design for extracting welding mist and grinding dust - Exhaust air can be vented into the work area or outside - BGIA M – Class - KOMPAKT 3000 control system Gbodpfx Aswd Nlkobdog - Air flow rate approx. 13,000 m³/h - Max. static pressure 4,000 pa - Efficiency > 99.9% - 4 cartridge filters - Filter area 6 / 150 m² - Jet Pulse filter cleaning - Dust container 40 L - Compressed air connection 6 to 8 bar - Drive - Fan 400 V / 7.5 kW - Space requirement approx. W 1,900 x H 3,400 x D 1,600 mm - Weight approx. 800 kg - Operating hours readout 4,126 h

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108016, Offer 05394 Gsdpfx Abjwqdycjdebg Technical data: - BIA-tested welding fume extractor - Articulated extraction arm 3000 mm - Air flow rate approx. 1000 m³/h - Max. static pressure 2700 pa - Filter area approx. m² - Filter control light for filter change - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW - Required space approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Year of construction: 2007, condition: good (used), machine/vehicle number: 164883, OFFER 17015 Technical data: - BIA approved welding extractor - Articulated extraction arm 3000 mm - air volume flow approx. 1000 m³/h - max. static pressure 2700 pa - filter area approx. m² - filter control light for filter change - separation efficiency 99,9 - compressed air connection 6 bar - drive - fan 400 V / 1,5 kW Gsdpohw Ev Sefx Abdebg - Space requirement approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg