Used Okuma Mx 50 Hb for sale (164)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1067, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, nominal power (apparent): 28 kVA, torque: 80 Nm, controller manufacturer: Okuma, controller model: OSP-U100L, workpiece height (max.): 500 mm, workpiece weight (max.): 700 kg, table width: 560 mm, table length: 1,300 mm, spindle speed (min.): 40 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 15,000 h, coolant supply: 20 bar, spindle nose: BT-40, number of slots in tool magazine: 20, mount diameter: 40 mm, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, 3-axis machining center with internal cooling through the spindle, 15,000 rpm, permanent oil cooling of the spindle. Various tool holders (collets, drill chucks, Weldon holders, and milling head holders). 3 Gressel-Gripos 125 mm vises as new, additionally tool presetting device PWB Toolmaster 250. Hnodpfx Agsw S Nc Rs Nou

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 500 mm, turning length: 1,630 mm, turning diameter: 500 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 430 mm, travel distance Y-axis: 190 mm, travel distance Z-axis: 1,474 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 20 m/min, total height: 23,000 mm, total length: 54,050 mm, total width: 28,880 mm, Equipment: documentation/manual, Okuma MacTurn 30 - 1500 OSP U100L CNC-Controller Number of axis - 5 +2 Swing over bed - Ø500mm Swing over carriage - Ø500mm Max dia. turning - Ø500 mm Max turning length - 1474 mm X axis Upper travel - 430 mm X axis Lower travel - 140 mm Z axis Upper travel - 1474 mm Z axis Lower travel - 1305 mm Y axis travel - 190 mm (+95/-95mm) W axis travel - 1305 mm C axis 360° (0.001 increment) Rapid travers Hnsdpfxjrdvhhe Ag Nju Upper X-axis 20,000 mm/min Lower X-axis 15,000 mm/min Upper Z-axis 25,000 mm/min Lower Z-axis 20,000 mm/min Y -axis 12,000 mm/min C-axis 200 rpm Spindle nose - JIS A2-6 Main spindle speed - 45-4500 rpm Sub spindle speed - 45-4500 rpm Main spindle power - 15 kW Sub spindle power - 15 kW Main spindle diameter - Ø100 mm Sub spindle diameter - Ø100 mm Main spindle boring - Ø62 mm Sub spindle boring - Ø62 mm Rotary tool spindle - 6000rpm Rotary tool spindle - 6,8kW ATC Magazine - BT40 Tool storage capacity - 40 tool Max tool dia. - Ø110 mm Max. tool lenght 300 mm Max. tool mass - 10 kg Chip conveyor type high Wight - 12100kg

Condition: ready for operation (used), Okuma OPUS 5000 GHP Power Supply 5000T SN: 00198 , serial no. according to photo ,used, normal signs of wear, 100% functional Hnodpsi Ecarsfx Ag Nju

Condition: used, CNC control, control panel, machining center -Disassembled from a: CNC lathe Make: Okuma type LB15 -complete unit -Dimensions: 790/600/H495 mm Hedpfjdtcrksx Ag Nonu -Weight: 79 kg

Condition: used, Year of construction: 2004, Max. turning length 1500 mm Spindle speeds (main spindle) 38-5000 rpm Spindle bore main spindle/subspindle 70/52 mm Spindle speeds (subspindle) 50-6000 rpm Spindle bore (subspindle) 80 mm Spindle speed on mill-spindle (B-axis) 200-6000 rpm (HSK 63) Max. turning diameter 550 mm Tool changer w/76 stations (extra tool magazine on the back of the machine) B-axis indexing 0,001 deg. Y-axis movement 190 mm (+95/-95 mm) Upper turret w/12 stations (HSK 63) & rotating tool stations 6000 rpm Lower turret w/12 stations (VDI) & rotating tool stations 5000 rpm Control: OSP-E100L Equipped with: Hydraulic chuck on main & subspindle (Rota 250 mm) Hnedpentkiyjfx Ag Nou Chipconveyor w/chip tray Air blowing on both spindles Automatic measuring incl. wireless High pressure coolant through spindles Touch setter OBS !! - The shown robot on photos is not included.

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand OKUMA Model OSP-P200M Main Drive Spindle speed range 12000 RPM Hjdpfxewhgu Dj Ag Nenu Number of axis 4 This 4-axis Okuma MA-800HB horizontal machining center was manufactured in 2008. Consider the opportunity to buy this Okuma MA-800HB horizontal machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 525 mm, workpiece weight (max.): 680 kg, number of slots in tool magazine: 20, TECHNICAL DETAILS Control: OSP-U100L Travel X: 1,020 mm Travel Y: 510 mm Travel Z: 525 mm Table Hsdpfxewtrbas Ag Nsnu Load capacity: 680 kg Clamping area: 1,200 mm x 510 mm Tool changer Magazine positions: 20 EQUIPMENT - Chip conveyor

Condition: good (used), Year of construction: 1993, functionality: fully functional, turning diameter over cross slide: 530 mm, turning length: 850 mm, turning diameter: 450 mm, spindle bore: 80 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 330 mm, travel distance Z-axis: 850 mm, spindle motor power: 30,000 W, total height: 1,800 mm, power: 30 kW (40.79 HP), Equipment: documentation/manual, Okuma LB35 II M, OSP 5020LG, tailstock, touch setter, extraction, coolant pump 8 bar, chip conveyor, in good condition in relation to its age, very few spindle hours and very well maintained. Hnsdpfxovta H Ej Ag Neu Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: ready for operation (used), Okuma Opus 5000 II Main Board II A E4809-045-086-A, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Hnjdpfxoi Ecaye Ag Nsu

Year of construction: 1998, condition: excellent (used), functionality: fully functional, TECHNICAL DETAILS x-way: 720 mm y-way: 630 mm z-way: 630 mm control: OKUMA OSP 7000 pallet size: 500 x 500 mm spindle speed: 10 - 5000 rpm tool holder: 10-fold pallet station tool holder: MAS BT 50 tool places: 200 pieces EQUIPMENT - tool breakage probe - Renishaw probe - High pressure coolant system Hjdek R Tp Uspfx Ag Nsnu - Coolant mist extraction system - Spindle load and torque monitoring - Thread milling - Chip conveyor The scope of delivery is not shown in the pictures but in the description text.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 36,000 h, functionality: fully functional, CNC Turning Machine Okuma LU300-2ST 350 Year of manufacture: 2005 - Control: Okuma OSP E100L - Clamping system: Chuck SK65 - 2 disc turrets with VDI40 (12 + 8 stations) - Parts catcher with conveyor belt - Chip conveyor Without tailstock Without bar feeder Without spindle reduction Without VDI tool holders Hjdpfjw Darbex Ag Njnu Machine weight: 6.8 t

Condition: ready for operation (used), Year of construction: 2005, Control Unit Hnodpfxewfurxe Ag Nsu Brand OKUMA Model OSP E-100M Main Drive Number of axis 4 Additional Equipment Balluf read/write Renishaw MP10 30 Bar coolant Mayfran Consept 2000 This 4-axis Okuma MA-600HB horizontal machining center was manufactured in 2005. Ideal for complex machining tasks, it offers robust construction and precision. Consider the opportunity to buy this Okuma MA-600HB horizontal machining center. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2002, OKUMA Euro Center V50 Year of construction 2002 Hnedpforfw Nhsx Ag Neu Control system OSP-U100L Travel distances X-1020 Y-510 Z-525 Table load 680kg Clamping surface 1200x510 Tool changer 20 magazine places chip conveyor

Condition: good (used), Year of construction: 2009, functionality: fully functional, turning length: 1,500 mm, turning diameter: 550 mm, spindle motor power: 22,000 W, spindle speed (min.): 3,800 rpm, spindle bore: 80 mm, power: 22 kW (29.91 HP), Equipment: rotational speed infinitely variable, Okuma Macturn 350 2SW-1500 Big Bore main spindle, machine type CNC turning-milling center Make / manufacturer Okuma Okuma Model / type MacTurn 350 2SW1500 BigBore Year of manufacture 2008 / 2009 Control OSP P 200 L IGF One Touch Advanced + CAS Spindle turning time 6437 h Technical data Max. turning diameter: 550 mm Max. turning length: 1,500 mm Travel path of upper turret (milling spindle): X-axis: 505 mm/190 mm/1670 mm Y-axis: 190 mm (+95 /-95) Z-axis: 1670 mm W-axis: 1680 mm Hedpovta Rdjfx Ag Njnu Travel path of lower turret: X/Z 210 mm/ 1670 mm Main spindle “Big Bore” version Spindle motor main spindle 22 kW, 412 Nm Max. speed main spindle 3800 rpm Spindle nose main spindle JIS A2-8 Spindle passage 80 mm Max. bar diameter: 71 mm C-axis 0.001 ° Counter spindle “Super Big Bore” version Spindle motor counter spindle 22 kW, 412 Nm Max. speed counter spindle 3300 rpm Spindle end counter spindle JIS A2-8 Spindle passage 80 mm Max. bar diameter: 71 mm Milling spindle Spindle motor milling spindle: 11 kW Max. speed milling spindle: 12000 rpm Tool holder: HSK 63 B-axis: 0.001° Tool magazine: 44 stations Lower turret Tool positions: 12 Tool holder: VDI-40, Driven tool stations: 12 positions Max. power of driven tools: 7.5 kW Max. speed of driven tools 4500 rpm Machine weight: approx. 15,000 kg Space requirement 6000 x 3500 x 3000 cm Other features - High pressure cooling 40 bar - Chip conveyor Interlit ISF 614 - Heavy crane filter Interlit SBP 4 - Touch Setter - Helical Cutting - 4 Extra M-Code Set - 2x hydraulic power chuck SMW BH-D 315-95 diam. 250 mm - DNC- T1 interface - RS 232 C interface - Chuck blow-off function main counter spindle - TAS -S + TAC-C Status report after commissioning in Bergisch Gladbach Geometry measurement results Reverse play XA - axis 0.015 mm Reverse play XB - axis 0.015 mm Reverse play ZA - axis 0.020 mm Reverse play ZB - axis 0.020 mm Reverse play Y - axis 0.010 mm XA - axis measured with measuring mandrel at 300 mm 0.02, YA at 300 mm 0.007in T1,T2, T3 B-axis: alignment and function good M-drive lower turret: tested and good Milling spindle: tested up to 6000 rpm, no abnormalities Main/counter spindle tested , no abnormalities High pressure pumps function well, no abnormalities Accessories - 2 x hydraulic crane chuck SMW - pallet with 16 driven tool holders, 10 HSK 63 holders, 3 VDI 40 holders - lifting hook on the front - all original axle locks Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: ready for operation (used), Okuma Opus 5000 II Main Board II A E4809-045-086-A / 1911-1509-44-90, serial number as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Hjdpfxji Eca De Ag Njnu

Condition: used, Year of construction: 2005, operating hours: 33,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Okuma, controller model: OSP E100M, rotational speed (min.): 10 rpm, rotational speed (max.): 15,000 rpm, spindle speed (min.): 10 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 70 bar, number of spindles: 1, number of slots in tool magazine: 60, Okuma MB 500H horizontal machining center with 2-station pallet changer Year of manufacture: 2005 Control system: Okuma OSP E100M Technical specifications: Spindle speed: 10 - 15,000 rpm Drive power: 26 kW Tool holder: BT 40 Number of magazine positions: 60 Internal coolant supply: 70 bar Travel paths: X-axis: 800 mm Y-axis: 800 mm Z-axis: 800 mm 4th axis: Index 1° Number of pallets: 2 Pallet size: 500 x 500 mm Hnodpfxowf E D Eo Ag Neu Accessories: - Mayfran ConSep 2000 coolant system - Mayfran ConSep chip conveyor - Tool breakage monitoring in the magazine - Workpiece coolant shower

Condition: ready for operation (used), Year of construction: 2005, operating hours: 62,500 h, functionality: fully functional, Control: OSP100L Year of manufacture: 2005 Operating hours: 62,477 h Spindle hours: 8,169 h Number of spindles: 2 C-axis on main and sub spindle Number of turrets: 1 Milling spindle: 1 Hnedewww Imopfx Ag Nju Turret stations: 12-position, VDI40 Y-axis Tool holders on milling spindle: HSK63 Tool magazine: 40-position Chuck on main and sub spindle Tool package: 30x HSK holders, 6 pcs VDI 40 holders Parts feeder with safety fence and 40 tool holders

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Reference: LT-2501 Manufacturer: Okuma Model: LB4000EX-MC x 750 CNC Control: Okuma OSP-P200L Year of Manufacture: 2007 Keyboard/Software Language: International / Spanish Country of Origin: Japan Technical Specifications: Capacity: Maximum swing over bed: Ø 670 mm Maximum swing over carriage: Ø 480 mm Distance between centers: 770 mm Maximum turning diameter: Ø 430 mm Maximum turning length: 750 mm Maximum bar capacity: Ø 90 mm (requires modification) Main Spindle: Spindle diameter: Ø 160 mm Spindle nose (type): JIS A2-11 Spindle bore: Ø 112 mm Speed ranges: 2, infinitely variable Hnedew Dvb Sjpfx Ag Neu Spindle speed: 30 – 3,000 rpm Motor: 37 / 30 kW (30 min / continuous) Motor type: PREX Motor Tailstock: Rotating center: MT 5 Travel (W axis): 780 mm Rapid traverse: 12,000 mm/min Maximum thrust: 7,500 N Z Axis: Travel: 840 mm Cutting feedrate: 0.001 – 1,000.00 mm/rev Rapid traverse: 30,000 mm/min X Axis: Travel: 300 mm Cutting feedrate: 0.001 – 1,000.00 mm/rev Rapid traverse: 25,000 mm/min C Axis: Controlled angle: 360° (0.001° increment) Turret: Type: M-V12 NC Number of tool stations: 12 x BMT40 (L or M) Indexing speed: 0.2 sec/position Tool Dimensions: External turning: 25 x 25 mm Internal turning: Ø 40 mm Driven Tool: Speed: 45 – 6,000 rpm Number of speed ranges: 1, infinitely variable Motor: 7.5 / 4.3 kW (25 min / continuous) Motor type: PREX Motor Dimensions and Weight: Machine height: 1,955 mm Floor space required: 3,050 x 1,900 mm Machine weight: 6,300 kg Included Options: SCHUNK ROTA THW plus 315-104 quick-change chuck (3 jaws, Ø 315 mm) CROMAR chip conveyor Assisted programming (ONE Touch IGF Advanced) Rigid tapping DNC-T1

Year of construction: 2001, condition: good (used), CNC lathe Manufacturer: OKUMA Type: LB-250T Model: OSP-U10L YEAR OF MANUFACTURE: 2001 Hedpfx Aok Hz Iwjg Nsnu 2-axis CNC lathe with robotized loading Description: two-axis X-Z lathe for short workpieces and with a robotized workpiece magazine X-AXIS: 180 mm Z-AXIS: 325 mm Spindl: 4500 1/min Coolant system and chip conveyor

Condition: excellent (used), Year of construction: 2019, operating hours: 2,044 h, functionality: fully functional, machine/vehicle number: 223697, turning length: 950 mm, turning diameter: 340 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,010 mm, rotational speed (max.): 5,000 rpm, Machine with Big-Bore Spindle TECHNICAL DETAILS Spindle speed: 45 to 4,200 rpm Spindle motor: 30/22 kW Spindle mount: JIS A2-8 Spindle bore: ø91 mm Axes and Travel Turning length: 950 mm Turning diameter: 340 mm C-axis control: 360° at 0.001° increments X-axis travel: 260 mm Y-axis travel: 120 mm; +70 mm / −50 mm Z-axis travel: 1,010 mm Tool Turret Turret type: V12, radial, for L and M tools Tool holder mount: VDI Speed: 45 to 6,000 rpm Rotary tool motor: VAC 7.1/4.1 kW Control CNC control: OSP-P300LA with 15" touch panel Pitch error compensation: X-/Y-/Z-axes Workpiece ejection detection: available Smart Interface: included API Library 2: activated Virus Protection System - OSP-VPS: available Software Functions One Touch IGF Advanced M-E Kit: standard Optional IGF Advanced M-D Kit: available Multitasking coordinate conversion: available Profile generation: available Cycle time inspection and reduction: available Hi-Cut Pro: available Load monitoring, spindle & feed axes: available Hsdpfswnqdiex Ag Nenu NC operation monitoring: available Spindle speed control: variable Y-axis turning: available Helical milling for MY machine: X/Y surface, Y/Z surface Cooling and Lubrication Coolant pump: 0.25 kW Coolant tank: L-type, replacing I-type High-pressure coolant pump: 0.8 kW Lubrication monitoring: A-1 incl. hydraulic pressure monitoring Dimensions and Construction CE marking and EMC: available IEC standard compliance: available Power supply CE-compliant: adapted to local standards Guideway extension for steady rests: available TAS-C: available Chip and Coolant Management Chip tray: side extraction Chip conveyor H-type: side, CE-compliant Fully enclosed with coolant protection: available MACHINE DETAILS Height: 2,444 mm Footprint: 3,420 x 2,041 mm Weight: 6,600 kg

Condition: ready for operation (used), Okuma 1006 inverter BLII-D50A Vers.1.2 consisting of board E4809-820-006-A + board E4809-770-069-A, used, normal signs of use, 100% functional, scope of delivery as per photos Hedpfx Ajt Izafsg Nsnu

Condition: good (used), Year of construction: 2002, Offered here is a 9-Axis-CNC Turning Center of the manufacturer Okuma. Hnsdsq Rf Ubjpfx Ag Nsu The machine is in a good condition and can be inspected by prior appointment. Technical Specs:

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, Ref. No.: LT-2418 Manufacturer: Okuma Model: Multus U3000 1SW-1500 Control: Okuma OSP-P300S-H Year of manufacture: 2014 Commissioning: 2.015 Language Keyboards / Software: International / English Country of origin: Japan Technical Characteristics: Capacity: Turning on bed: Ø 650 mm Distance between points: 1.500 mm Maximum turning diameter: Ø 650 mm Maximum turning length: 1.500 mm Bar pitch (main spindle): Ø 70 mm Bar passage (opposite spindle): Ø 70 mm Main spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) Opposing spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed range: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) X-axis: Stroke: 645 mm Rapid traverse: 50.000 mm/min Z axis: Stroke: 1,600 mm Rapid traverse: 50.000 mm/min Y-axis: Stroke: 250 [± 125] mm Rapid traverse: 40,000 mm/min W-axis: Stroke: 1,594 mm Rapid traverse: 30.000 mm/min B axis: Controlled angle: -30° to +210° (increment 0.001°) Rapid traverse: 30 rev/min C axis: Hjdpfx Asu U E Aveg Njnu Controlled angle: 360° (0.0001° increment) Rapid traverse: 200 rpm Turret: Type: H1 Number of tools: 1 (L or M tool) Tool dimensions: Turning outside: 25 x 25 mm Turning inside: Ø 40 mm Milling head: Spindle speed: 50 - 12.000 rpm Speed ranges: 2 speed ranges, infinitely variable Motor: 25/19 kW (3 min/cont) Tool changer (ATC): Cone Toolholder: HSK-A63 Number of tools: 40 Max. diameter of adjacent tools: ø 90 mm Maximum diameter of non-adjacent tools: ø 130 mm Maximum tool length: 400 mm Maximum weight of each tool: 10 Kgf Dimensions and weights: Height of the machine: 2.905 mm Occupied floor area: 4,480 x 2,995 mm (4,480 x 2,995 mm) Machine weight: 16,200 kg

Condition: ready for operation (used), Okuma SDU-600.W Spindle Drive Unit Model 1A E04809-045-019D, serial number as per photo, used, normal signs of wear, 100% functional Hedpfji Eca Ijx Ag Nenu

Condition: ready for operation (used), Okuma SDU-600.W Spindle Drive Unit Model 1A E04809-045-071, serial number as per photo, used, normal signs of wear, 100% functional Hjdpfxoi Eca Sj Ag Nenu