Used Okuma Lu 45 for sale (219)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 162881, turning diameter over cross slide: 410 mm, turning length: 1,000 mm, turning diameter: 340 mm, spindle bore: 80 mm, rotational speed (max.): 3,800 rpm, TECHNICAL DETAILS Swinging diameter over bed: 530 mm Swinging diameter over carriage/slide: 410 mm Distance between centers: 1,000.00 mm Maximum turning diameter: 340 mm Maximum machining length: 1,000 mm Travel X-axis: 260 mm Travel Z-axis: 1,016 mm Travel X-axis (B-axis): 139 mm Travel Z-axis (B-axis): 965 mm C-axis: 360° Control: Okuma OSP-P200LA Blsdsy U T Dlepfx Amish Spindle speed: 38–3,800 rpm Speed ranges: stepless, automatic range selection Spindle nose: Option A2-8 Big Bore Spindle bore: 80 mm Main drive motor: 22.37 kW Torque: 412.17 Nm Upper multitasking turret: V-12 NC turret Lower turret: V8 (VDI) Indexing time without lifting: 0.18 s Speed of driven tools: 45 – 4,500 rpm Motor for driven tools: 7.08 kW Feeds X/Z: 333.16 / 416.56 mm/s Feed C: 3.333 rpm Tailstock spindle diameter: 90 mm Tailstock taper: MK #5 Tailstock travel: 120 mm MACHINE DETAILS Machine weight: 8,800 kg Supply voltage: 220/480 V Phases: 3-phase Frequency: 60 Hz Rated apparent power: 31 kVA Full load current: 81.7/37.5 A Largest motor rated current: 96 A Short-circuit rated values: 30/10 kA

Condition: ready for operation (used), Year of construction: 2008, operating hours: 18,349 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 340 mm, spindle speed (max.): 4,800 rpm, controller model: OSP P200L, Equipment: chip conveyor, TECHNICAL DETAILS Turning length: 1,000 mm Turning diameter: 340 mm Spindle speed (max.): 4,800 rpm Axes: 4 Tool turret A: VDI40 V12 with driven tools Tool turret B: VDI40 V8 MACHINE DETAILS Bjdjy Txycjpfx Amiolh Control system: OSP P200L Operating hours: 18,349 h EQUIPMENT Touch probe Chip conveyor Coolant station Standard spindle bore Tailstock: manual

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning length: 1,000 mm, turning diameter: 350 mm, spindle bore: 62 mm, spindle speed (max.): 5,200 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Swinging diameter over cross slide: 370 mm Turning length: 1,000 mm Swinging diameter: 350 mm Spindle bore: 62 mm Spindle speed (max.): 5,200 rpm MACHINE DETAILS Coolant pump: 8 bar EQUIPMENT Documentation/Manual Speed infinitely adjustable A-turret VDI40, 12 stations (all powered) B-turret VDI40, 8 stations Touch setter for A & B turrets Tailstock, manual Chip conveyor Extraction system Bar feeder, Samsys Multi-3000 Bljdpfx Ajy S S Anjmieh

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1938, turning length: 850 mm, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, workpiece length (max.): 850 mm, workpiece diameter (max.): 300 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 850 mm Turning diameter: 340 mm Spindle speed max.: 4,500 rpm Workpiece diameter max.: 300 mm Workpiece length max.: 850 mm Workpiece clamping: 3-jaw chuck, Kitagawa B-210 MACHINE DETAILS Control system: Okuma OSP 7000L Power max.: 22 kW Rated voltage: 400 V Bjdpfsy R Uxijx Amislh Number of phases: 3 Frequency: 50 Hz Power consumption max.: 30.1 kVA Total current consumption: 43.4 A Motor current consumption max.: 106 A Current interruption at: 10 kA Note: Since other machines need to be moved to allow for loading, the stated disassembly and loading costs apply.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 7,984 h, functionality: fully functional, machine/vehicle number: 1408, turning length: 250 mm, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, bar passage: 65 mm, controller model: Okuma OSP7000L, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning diameter: 340 mm Maximum turning length: 250 mm Main Spindle Technology: Motor spindle Speed: 4,500 rpm Power (max.): 22 kW Bar capacity: 65 mm Workpiece clamping: 3-jaw chuck, Kitagawa B-210 Tool Turret I (X/Z) Technology: 12-station turret Tool holder: VDI40 Travel in X: 260 mm Travel in Z: 640 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min Tool Turret II (X/Z) Technology: 8-station turret Tool holder: VDI40 Travel in X: 140 mm Travel in Z: 615 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min MACHINE DETAILS Control: Okuma OSP7000L Dimensions & Weight Dimensions (L x W x H): 3,305 x 2,100 x 1,927 mm Weight: 4,800 kg Electrical connection data Rated voltage: 400 V Number of phases: 3 Frequency: 50 Hz Power consumption: max. 30 kVA Total current: 43.4 A Motor current: max. 106 A Operating Hours Power-on hours: 36,348 h Cutting time: 7,984 h Spindle run time: 8,674 h EQUIPMENT Chip conveyor Coolant pump Automatic measuring arm Bjdpox Hx Dnsfx Amislh Transformer

Condition: excellent (used), Year of construction: 1999, X-axis 762 mm Y-axis 460 mm Z-axis 450 mm Working area 1,000 x 460 mm Spindle speed 7,000 rpm Tool holder SK40 Drive power 7 kW Weight 5,500 kg Incl. 2-position pallet changer Bsdpfx Amox Ek Ngsielh Incl. internal coolant supply (IKZ) Incl. complete documentation

Condition: used, Year of construction: 1995, turning diameter 150 mm turning length 1250 mm control OSP 7000 L total power requirement 37 kW weight of the machine ca. 8500 t Bjdpsyi Hwtsfx Amielh

Condition: used, Year of construction: 2001, x-travel 560 mm y-travel 460 mm z-travel 450 mm Bljdpfx Amoyi Hv Njijh Control OSP U10 M total power requirement 7,5 kW weight of the machine ca. 5 t

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, Equipment: chip conveyor, documentation/manual, Machine Name - Okuma Machine Model - MX45VAE Y.O.M 2000 Descriptions - OSP 700M Spindle Speeds 7000 rpm BT40 taper Table Size 1000 mm x 460mm X – Axis Travel 560mm Y – Axis Travel 460mm Z – Axis Travel 450mm 20 station ATC Bjdpfozair Ujx Amijlh Renishaw tool setter Renishaw work probe Coolant system and conveyor 2 x identical machines available

Condition: used, 4 Axis Year Of Manufacture: 1998 8” Chuck 2 Turrets – Turret 1 – 12 Stations Turret 2 – 8 Stations Bledpfsy Drunox Amish Programable Tailstock 750mm Between Centres Live Tooling C Axis Touch setter Y axis Swarf Conveyor Okuma OSP 7000L Control

Condition: ready for operation (used), Okuma BDU-30A Brushless Servomotor Drive Unit with E4809-045-061-D, serial number as per photo, used, normal signs of wear, 100% functional Blodpfx Amei D Naajish

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 260 mm, travel distance Z-axis: 1,020 mm, controller manufacturer: OKUMA, number of axes: 4, This 4-axis Okuma LU15 M-2SC 1000 was manufactured in 1998. It features two tool turrets, live tooling with C-axis capabilities, and synchronous tapping for enhanced productivity. The machine includes an integrated tool setter for precise measurements and a programmable tailstock for versatility. If you are looking to get high-quality turning capabilities, consider the Okuma LU15 M-2SC 1000 horizontal turning machine we have for sale. Contact us for further details. • Longitudinal Travel (X): 1020 / 995 mm • Cross Travel (Z): 260 / 140 mm • Turning Range: 340 mm • Swing Diameter over Bed Cover: 530 mm • Swing Diameter over Cross Slide: 380 mm • Spindle Nose: ASA-A2 / DIN 55026 Gr. 6 • Spindle Bore: 62 mm • Spindle Diameter in Front Bearing: 100 mm • Chuck Diameter: 200 mm • Main Drive: Motor spindle (hollow shaft motor) frequency-regulated 60% ED • Power (Main Drive): 22 kW • Max Torque: 412 Nm • Speed Range: 45 - 4,500 rpm • Speed Levels (Electrical): 2 Bledpfx Aey Nmi Demioh • Feed Drive: AC servo motors, digitally regulated • Feed Range X/Z: 0 - 1,000 mm/U • Rapid Traverse X/Z: 15 / 20 m/min • Power X, Z: 2.4/1.5 kW and 4/4 kW • Feed Force X, Z: 11/3.7 kN and 7/6.7 kN • Turrets: 2 tool turrets • Live tooling: Yes (C-axis and driven units) • Tapping: Synchronous tapping • Spindle interpolation: Automatic main spindle interpolation • Tool monitoring: Wear and breakage monitoring • Tool measurement: Integrated tool setter / measuring device • Tailstock: Programmable, towable with bed slide, automatic clamping • Tailstock quill: Controllable via M-command • Draw tube bore: 55 mm (partial hollow clamping cylinder) • Interface: DNC Interface RS-232C • Cooling system: Reinforced pump (8 bar at 30 l/min) • Programming: ONE TOUCH Dialog-NC (automatic work plan generation) Additional equipment • Chip conveyor (1,200 mm discharge height) Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,200 rpm, travel distance X-axis: 350 mm, travel distance Z-axis: 920 mm, spindle motor power: 40,000 W, total height: 2,600 mm, total width: 2,600 mm, overall weight: 13,500 kg, product length (max.): 5,200 mm, number of slots in tool magazine: 22, number of axes: 4, This 4-axis Okuma LU35-M was manufactured in 2008. It features a maximum turning diameter of 550 mm and a Z-axis travel of 920 mm. The machine is equipped with two revolvers, offering a total of 22 tool stations, and operates at a spindle speed of 3200 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LU35-M horizontal turning machine we have for sale. Contact us for further details. • Maintenance Contract: Yes • Utilization: 85% Bedey A Ibhspfx Amijlh • Shifts: 2 • Number of Tools: 12 • Number of Revolvers/Magazines: 2 • Maximum Turning Diameter: 550 mm • Control System: OSP-P200L • Revolver A: 12 stations • Revolver B: 10 stations • Spindle Bore: 90 mm • Supply Voltage: 400 V • Phase: 3 • Frequency: 50 Hz • Rated Capacity: 53.1 kVA • Full Load Current: 76.7 A • Largest Motor Rating: 134 A • Interrupt Capacity: 10 kA • X-axis travel (A turret): 350 mm (corresponds to max Ø700 mm) • X-axis travel (B turret): 240 mm (corresponds to max Ø480 mm)OPTIONAL for an additional charge: around 100 x tools, Clamping elements, chuck jaw sets, 2-jaw chucks, zero-point clamping systemElectrical maintenance was carried out 1.5 years ago. During this work, some electrical components were replaced or cleaned Technical Specification Counter Spindle No Driven Tools Yes Taper Size VDI 50

Year of construction: 2006, condition: ready for operation (used), Control Unit Brand OKUMA Model OSP-P200L This Okuma LU300-M was manufactured in 2006. A robust horizontal turning machine featuring a spindle bore of 62mm and speeds up to 5000 RPM. It includes dual turrets with 12 and 8 positions respectively, enhancing its versatility. Equipped with a Mayfran chip conveyor and OSP-P200L control for efficient operation. Consider the opportunity to buy this Okuma LU300-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning Bsdjx D Nf Ispfx Amiolh

Condition: like new (used), Year of construction: 2022, operating hours: 521 h, functionality: fully functional, machine/vehicle number: L3M0474, turning length: 500 mm, turning diameter: 300 mm, total height: 2,210 mm, total length: 3,950 mm, total width: 2,260 mm, overall weight: 5,680 kg, Equipment: documentation/manual, used Okuma lathe As-new, well-maintained condition Bsdpfx Amsy Rx Tdjijlh 521 operating hours 347 spindle hours

Condition: ready for operation (used), Okuma DC-S1A DC Power Supply 4 Axes CZ-270C , serial no. according to photo ,used, normal signs of use, 100% functional Blodpfx Aoi Ecanemioh

Condition: ready for operation (used), Okuma Opus 5000 II Main Board II A E4809-045-086-A, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Bodei Ecayjpfx Amijlh

Condition: ready for operation (used), Okuma Opus 5000 II Main Board II A E4809-045-086-A / 1911-1509-44-90, serial number as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Bjdpfx Aji Eca Djmijlh

Condition: ready for operation (used), Okuma SDU-600.W Spindle Drive Unit Model 1A E04809-045-019D, serial number as per photo, used, normal signs of wear, 100% functional Bsdpsi Eca Iofx Amielh

Condition: ready for operation (used), Okuma SDU-600.W Spindle Drive Unit Model 1A E04809-045-071, serial number as per photo, used, normal signs of wear, 100% functional Bljdpfxei Eca Sj Amieh

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: LU3000EX, Power kVA: 34.2 Blsdpox Hg Eysfx Amish

Condition: ready for operation (used), Year of construction: 2005, operating hours: 44,673 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, controller model: OSP-E100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 320, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on schedule in week 30 of 2026! TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 900 mm Z-axis travel: 900 mm Spindle speed: 12,000 rpm Tool holder: BT50 Tool positions: 320 Tool positions for 600 mm tools: 80 Part accuracy: 0.001° MACHINE DETAILS Control system: OSP-E100M Number of axes: 4 Coolant pressure: 30 bar Operating hours NC cycle time: 71,235 h Spindle running time: 56,241 h Machining time: 44,673 h EQUIPMENT ATC with 320 positions 80 positions for 600 mm tools Balluff writing/reading system NC table Absolute scales in X, Y, and Z Renishaw MP10 measuring probe Tool breakage monitoring MOP tool monitoring Blodpfxoy S T Rto Amieh 30-bar coolant system Mayfran Consep 2000 chip conveyor

Condition: used, Year of construction: 2003, operating hours: 23,000 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,000 mm, controller model: OSP-E100M, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on time by the end of week 26 of 2026! TECHNICAL DETAILS Travel in X-axis: 1,000 mm Travel in Y-axis: 950 mm Travel in Z-axis: 1,000 mm Bledpfx Amjzbamfeieh Main spindle speed: 12,000 rpm Table width: 630 mm Table height: 630 mm NCB B-axis: 0.001 degrees MACHINE DETAILS Control system: OSP-E100M Dimensions (L x W x H): 6,500 x 3,460 x 3,280 mm Operating hours: approx. 23,000 h EQUIPMENT 2 APC pallet changing systems 100 ATC tool changer SK50 with tool ID Coolant system Mayfran Consept Renishaw preparation (receiver) Tool breakage monitoring installed in the magazine (special development) An optional tool package with 230 tools is available for the machine for €5,000. The seller can offer dismantling, transport securing, removal and loading for an additional charge of €7,850.

Condition: good (used), Year of construction: 1998, Used CNC turning lathe by Okuma Bljdpey U Iz Sofx Amijh Type: LCS 15 Includes tool holder Turning length: 280 mm Turning diameter: 270 mm Tool changer Year of manufacture: 1998 Excluding bar feeder and chip extraction system.

Condition: good (used), Year of construction: 2004, functionality: limited functionality, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Okuma, controller model: OSP-E100M, workpiece length (max.): 600 mm, workpiece width (max.): 710 mm, workpiece weight (max.): 400 kg, total height: 2,760 mm, total length: 4,535 mm, total width: 2,415 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, overall weight: 10,000 kg, spindle speed (max.): 8,000 rpm, distance table center to spindle nose: 710 mm, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Okuma Space Center MA400HA Horizontal Machining Centre Machine Type: CNC Horizontal Machining Centre Year: 2004 Control: OSP-E100M Axes: 4 No. of Pallets: 2 Condition: Good - There is an issue with the pallet changer. Includes Cromar Swarf Conveyor Coolant Filtration System Technical Specifications Pallets: 2 Size of Pallets: 400 x 400mm X Axis Travel: 560mm Y Axis Travel: 610mm Z Axis Travel: 625mm B Axis Travel: 360 Deg Rapid Traverse: 60m/min Spindle Centre to Pallet Top: 50 - 660mm Spindle Nose to Pallet Centre: 85 - 710mm Max Pallet Load: 400kg Max Workpiece Dimensions: 600 x 710mm Tool Pockets: 40 Spindle Taper: BT40 Spindle Power: 15kW Spindle Speed: 8,000rpm Machine Dimensions: 4535 x 2415 x 2760mm Machine Weight: 10,000kg Notes: *Specifications are given in good faith but not guaranteed* Bsdpfx Amewcd Eveiolh