Used Optimat Bhx 500 for sale (39,143)

Condition: excellent (used), CATALOGUE NUMBER 7590 Gedov Nhpmepfx Ag Nekc Technical data: - shaft width 500mm - 3-knife shaft - shaft cover - top length 2360mm - cast iron tops - both tops adjustable - cast iron guide adjustable at an angle - engine approx. 3kW - dimensions length/width/height 2360x1000x1000mm - weight 630kg Advantages: - Italian production - used planer - intended for professional use Net price: PLN 6900 Net price: EUR 1620 Net price calculated according to the exchange rate of PLN 4.25/EUR (with greater exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – wood-chip biomass boiler (2009) ⚙️ Technical data • 🔹 Model: Fröling Turbomat 500 • 📅 Year: 2009 Gjdpsxmrwfofx Ag Nekc • 🔥 Nominal output: 450 kW (W40) • ♨️ Maximum output: 495 kW • 💧 Water content: 750 litres • 🧱 Operating pressure: 6 bar • 🌡️ Max. temperature: 110 °C • ⚖️ Weight: approx. 6 800 kg • 🏭 Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Main features • ♻️ Fully automatic ash removal and heat-exchanger cleaning • 🔥 Four-layer, fireclay-lined high-temperature combustion chamber • 💦 Water-cooled feed channel – ideal for moist fuels • ⚙️ Moving grate for continuous and efficient combustion • 🌬️ Lambda control with multi-zone air regulation and low emissions • 🌀 Automatic draught and suction fan control • 🧰 Robust industrial design, easy to maintain • 🌲 Fuels: wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • ⚡ High efficiency, fully automatic operation • 🔧 Low maintenance, long service life • 🌫️ Reliable performance even with higher-moisture fuel • 🏢 Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary

Condition: repair required (used), Year of construction: 1997, functionality: fully functional, power: 18 kW (24.47 HP), type of cooling: air, manufacturer: BECKER Type: rotary vane vacuum pump Model: DTLF 500 Year of construction: 1997 Order number: 1475879 NOTE: rotor blades need to be replaced. electric motor ELEKTRO ADDA Speed: 980 min-1 Rated power: 18.5 kW Input power: 500 m3/h Rated pressure: 800 mbar Gksdpfx Agsvmhqrj Noc Rated vacuum: 0 mbar Attachment: FC200LT/6 Manufacturer: ELECTRO ADDA Type: MotoR Motor voltage [V]: 380/690v Current [A]: 38.5 Motor voltage [V]: 380-690 Rated speed [rpm]: 970/1170 Weight: ca350kg

Condition: new, Year of construction: 2025, 27 HP petrol engine (LONCIN, auto start) Capacity 764 cc The maximum dimensions of the workpiece 910 x 4800 mm The dimensions of the cutting tape are 4576 x 40 x 0.9 mm Belt speed 17 m / min Tooth pitch 22 mm Wheel diameter 508 mm Manual feed Dimensions 4064 x 1778 x 1800 mm Extension 6000 x 1010 mm Transport dimensions 2080 x 750 x 830 mm Gjdpfxjhg Ahnj Ag Nskc Weight 722/782 kg Option transporting wheels

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 13378, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 500 m/min, rapid traverse Y-axis: 400 m/min, rapid traverse Z-axis: 400 m/min, spindle speed (max.): 7,500 rpm, Working machine. Being Used every Day Gkjdoxlikaepfx Ag Njc

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, type of input current: three-phase, overall weight: 1,410 kg, input frequency: 50 Hz, nominal power (apparent): 500 kVA, type of output current: three-phase, Equipment: type plate available, 6 months warranty Godpfx Aswnfx Ujg Nskc

Condition: new, Catalogue number O231 - new machine, in stock - CE certificate TECHNICAL DATA - engine power 5.5 kW (7.5 HP) - feed motor power 0.5 kW (0.75 HP) - shaft diameter 120mm - rotational speed 5500 rpm - feed speed 4 – 20 m/min - max. width of processed material 630mm - min. length of processed material 280mm - max. height of processed material 300mm - smallest thickness 5mm - max. cutting depth 8mm - number of knives 4pcs - diameter of exhaust port 160mm - machine dimensions 1250 x 1270 x 1180 mm - weight 870kg OPTIMAT TYTAN G630 Thicknesser Catalog number O231 - new machine, in stock - warranty, CE certificate TECHNICAL DATA Gksdpfx Agerrg Uwe Njc - engine power 5.5 kW (7.5 HP) - feed motor power 0.5 kW (0.75 HP) - shaft diameter 120mm - rotational speed 5500 rpm - feed speed 4 – 20 m/min - max. width of processed material 630mm - min. length of processed material 280mm - max. height of processed material 300mm - smallest thickness 5mm - max. cutting depth 8mm - number of knives 4pcs - diameter of exhaust port 160mm - machine dimensions 1250 x 1270 x 1180 mm - weight 870kg Original photos Net price: PLN 35,000 Net price: EUR 8,240 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: ready for operation (used), machine/vehicle number: 28700043, Condition Used Stock Number 38296/38297/8A This listing is for the Life Technologies Invitrogen Power Ease 500 Electrophoresis Power supply The unit is in full working condition and is ready for immediate release he Invitrogen PowerEase 500 is a high-performance, programmable electrophoresis power supply, specially designed for use with mini gel electrophoresis systems. It offers robust features tailored for precision, convenience, and safety in protein and nucleic acid gel electrophoresis applications. External Dimensions (W × D × H): 16.5 × 27 × 20 cm Weight: 2.9 kg (6.4 lbs) Features Functionality Designed for Mini Gels: Optimized for use with mini gel electrophoresis setups. LCD Display: 240 × 128 pixel interface displaying real-time run data. Gsdpswf Tauofx Ag Nskc Parallel Port Connectivity: Can be connected to most printers with a parallel port for printing detailed run logs. Run Data Logging: Displays number of gels, current, voltage, power, and temperature during operation. Pre-Programmed Modes: 8 pre-set methods specifically for Novex™ gels 4 user-defined custom methods Multiple Gel Support: Up to 10 Tris-Glycine gels (5 mini-cells) Up to 2 NuPAGE™ gels (1 mini-cell) Up to 6 NuPAGE™ Tris-Acetate gels (3 mini-cells) Control Modes: Constant voltage, constant current, and constant power modes. Safety Protections: Open/short circuit, thermal overload, overvoltage, and overcurrent safeguards. Programmability: Stores up to 16 custom user protocols. Linear Voltage Ramp: Instantaneous voltage ramping capability. Optional Temperature Probe: Supports thermal shutoff with probe. Usage Maintenance Tips Cold Room Usage: LCD may fade at low temperatures but returns to normal once warmed. Regular Cleaning: Prevent salt deposits by occasional cleaning. Safety: Avoid connecting/disconnecting leads while the high-voltage indicator is active.

Condition: new, Year of construction: 2025, OPTIMAT TYTAN G630 thicknesser with a knife shaft Gkedpellwm Esfx Ag Njc Motor power 5.5 kW (7.5 HP) Feed motor power 0.5 kW (0.75 HP) Shaft diameter 120 mm Rotation speed 5500 rpm Feed speed 4 - 20 m/min max. workpiece width 630 mm Min. workpiece length 280 mm max. height of the processed material 300 mm The smallest thickness is 5 mm max. cutting depth 8 mm Number of knives 4 Machine dimensions 1250 x 1270 x 1180 mm Diameter of the extraction spigot 160 mm Weight 870 kg Spiralroller + 1000 euro

Condition: new, Year of construction: 2025, 7.5 kW electric motor 400V capacity, 3 phases The maximum dimensions of the workpiece 790 x 178 x 2794 mm Cutting band dimensions 3960 x 34 x 0.9 mm Gsdpfx Ajid I A Esg Nskc Belt speed 17 m / s Pitch between the teeth 22 mm Wheel diameter 480 mm Dimensions 4064 x 1778 x 1800 mm Track dimensions 4000 x 1030 mm Transport dimensions 2150 x 610 x 810 mm Weight 352/380 kg Additional 2 Meter section costs 350 euro without VAT

Condition: new, Year of construction: 2025, 5.5 kW electric motor Godpfx Ajid I Dfsg Nskc 400V capacity, 3 phases The maximum dimensions of the workpiece 660x178x2794 mm The dimensions of the cutting band are 3690x34x0.9 mm Belt speed 17 m / s Pitch between the teeth 22 mm Wheel diameter 480 mm Dimensions 4064x1778x1800 mm Track dimensions 4000x900 mm Transport dimensions 2080x610x810 mm Weight 352/380 kg Additional 2 Meter section costs 350 euro without VAT

Condition: new, Year of construction: 2025, The machine is designed to cut both soft and hard wood or wood blocks in lengths compatible with the design of the machine. Dry or fresh (raw) wood can also be cut. Godjgykfvepfx Ag Nokc This model is equipped with a powerful petrol engine. The absence of a power connection allows greater mobility and independence. Maximum cutting length depends on the number of extensions used (optional equipment). In the basic version, it is 2.72 m. 15HP gasoline engine (LIFAN, manual start + key) Capacity 420cc The maximum dimensions of the workpiece 790x178x2794 mm The dimensions of the cutting band are 3670x34x0.9 mm Belt speed 17 m / min Pitch between the teeth 22mm Wheel diameter 475mm Dimensions 4064x1778x1800 mm Track dimensions 4042x900 mm Transport dimensions P1: 1800 * 550 * 810 mm P2: 2000 * 140 * 95 mm Weight 312/344 kg Additional 2 Meter section costs 350 euro without VAT

Condition: new, Year of construction: 2023, Standby power 20 kVA (16 kW) Full load 17.5kVA (14kW) Voltage 230/400V Generator power 16 kW Generator continuous power 14 kW Number of phases 3 ECU adjustment Fuel tank capacity 60 l Liquid cooling Frequency 50Hz Rotation speed 1500 rpm. Engine type in-line, 4-cylinder, naturally aspirated Cylinder diameter and length 98 x 105 mm Engine capacity 3.2 liters Godpfx Aei Nthqeg Nekc Capacity oil approx. 3 l (between the min./max. value on the dipstick) Capacity coolant approx. 5 l diesel fuel Compression ratio 17.2:1 DATAKOM D300 control panel Insulation class (alternator) H Number of windings (alternator) 12 IP degree of protection (alternator) IP23 Shunt excitation type Voltage (alternator) +/- 1% Overall dimensions (length x width x height) 2000 x 900 x 1070 mm EURO III emission standard Weight 730 kg

Condition: new, Year of construction: 2024, The Optimat BD150 Floor grinding machine is the perfect complement to the SDP750 sander. It is ideal for leveling sanding, sanding wooden surfaces, finishing and renovation work, as well as for stairs, corners and edges. Gsdpfx Ajtw Smvsg Nekc Thanks to its compact size, it ensures precise sanding quality. The edge sander is equipped with a powerful motor and an integrated dust extraction system. The BD150 is suitable for Velcro and screw discs. The tiltable dust extraction pipe ensures that the dust bag is not damaged. Efficiency 5 m2/h Disc diameter 150 mm Engine speed 11,500 rpm Disc speed 3400/3700 ​​rpm Power consumption 1.1 kW Length of long nozzle 481 mm Dimensions (L x W x H) 552 x 246 x 410 mm Weight (without cord) 10 kg Sound power level 80 dB(A)

Condition: new, Year of construction: 2024, Edge thickness 0.4 - 3 mm The thickness of the glued boards is 8 - 45 mm The difference in the width of the rim and the thickness of the board max 4 mm The minimum length of the glued boards is 170 mm The minimum width of the boards to be glued is 90 mm Mechanical feed speed 9 m / min Gkedpfxjgyi Ute Ag Nec Adhesive temperature 60–250 ° C 1.2 l tank capacity Rotation of the heads of the pre-milling machine 12,000 rev. / min. Collecting size of the pre-milling machine 0 - 2 mm Rotation of milling cutters of the linear milling machine 12,000 rev. / min. Rounding radius R = 2mm Trimmer ball rotation 12,000 rpm. Rotation of polishing discs 2800 rpm Installed power 6.0 kW Compressed air pressure 7 - 8 bar Extraction connector min. 3,500 m3 / h 3 x fi 125 mm Extended width. table (steady rest) 560 mm Table working height 960 mm Dimensions (L x W x H) 4030 x 640 x 1420 mm Gross weight 915 kg

Condition: new, Year of construction: 2025, min. / max. veneer thickness 0.4 - 3 mm min. / max. veneer height 12 - 47 mm (optional: veneering up to 60 mm) min. / max. material height 10 - 45 mm min. material width 100 mm min. material length 100 mm material pre-milling 2 motors with power (diamond cutter) 2.2 kW feed motor power 2.2 kW panel desk at eye level : chain feed : loading plate for PVC and ABS edges : mechanical pressure zone driven by the main pressure roller and a series of pressure rollers to minimize the glue layer : central pressure setting : container for glue granulate : glue application to the material using a glue roller : electronic temperature control, working temperature 180 - 200 °C pneumatic tape cutting guillotine : control lamp for element spacing : double trimming saw for cutting off front and rear excess material : precise linear guides : trimming in motion for high cutting precision : veneering speed 9.5 m / min flat and round milling top / bottom with vertical and horizontal guidance 2 x 0.55 kW, 12,000 rpm. scraper unit: polishing unit top / bottom 2 x 0.18 kW, 50 Hz, 2,800 rpm. height and tilt adjustment: extraction connector 3 x fi 120 mm, 1 x fi 100 mm, roller table extension 250 mm: noise-reducing housing with a window to view the units: trimming unit 0.44 kW glue roller unit 0.55 kW glue tank heater 2.2 kW Gsdjv Dutbjpfx Ag Nskc compressed air connection 6.5 bar total power consumption 9 kW / 400 V dimensions L. 3590, W. 1220, W. 1686 mm weight 1100 kg • Pre-milling with counter-milling cutters placed on heads ensuring the highest quality of processing. • Front and rear cutting with a double saw. Upper and lower milling on a separate cutter. • Radial or flat scraper (to choose from). -polishing unit • Equipped with a control computer with an LCD display. • Very simple operation with switching on/off individual units with a single button. • In a word, an ergonomic and precise machine at a very favorable price offer, unmatched on the global market. • Standard function of a replaceable glue tank.

Condition: new, Year of construction: 2025, Planer OPTIMAT SOLID W 520S with a spiral shaft Min. material thickness 10 mm max. material thickness 75 mm Planing width 520 mm Min. workpiece length 150 mm Min. workpiece width 10 mm Total length of the table 2750 mm Receiving table length 1200 mm Length of the feeding table 1500 mm Shaft length 520 mm Shaft diameter 121 mm Shaft rotation 5000 rpm Gedpfx Aslvuqfjg Nekc Time to shaft stop less than 10 s Number of knives 126 Knife dimensions 15 x 15 x 2.5 30° Guide dimensions 1200 x 190 mm Guide inclination from 90° to -45° Motor power 5.5 kW Table height (from the ground) 845 mm Diameter of the extraction spigot 120 mm max. cutting depth 8 mm Sound power level 99.2dB(A) Weight 800 kg

Condition: new, Year of construction: 2024, Planer: Working table dimensions 400x1800 mm Cutting block diameter 70 mm Shaft rotation speed 5700 rpm The dimensions of the knives 400x20x3 mm Max. 4 mm table adjustment Thicknesser: Working table dimensions 400x760 mm Feed speed 7 m / min Working height 4-220 mm General parameters: Gsdjg S N Agopfx Ag Nokc Three-phase motor power 4.0 - 3.0 HP - KW Weight 380 kg The cast iron structure of the body, the exact limiter of the cross cut and the excellent quality of workmanship allow to achieve the best machining results. Machining is extremely efficient and accurate. The cast iron structure of the body allows for safe and effective processing of even large elements.

Condition: new, Year of construction: 2024, Planer: Working table dimensions 300x1500 mm Cutting block diameter 70 mm Shaft rotation speed 5700 rpm The dimensions of the knives 300x25x3 mm Max. 4 mm table adjustment Thicknesser: Working table dimensions 300x660 mm Feed speed 7 m / min Working height 4-220 mm Circular Saw : Working table dimensions 220x1000 mm Shaft rotation 4500/7000 rpm Blade diameter 250x30 mm Processing height at 45 ° / 90 ° 50/80 mm Cutting width with a parallel guide 600 mm The dimensions of the scoring unit are 90x22 mm Milling machine: Godpfxeg S Nz Ao Ag Njkc Working table dimensions 220x1000 mm Shaft rotation 2000/3100/4400/7000 rpm Shaft diameter 30/35/50 mm 115 mm vertical shaft stroke Tool diameter 160 mm Tenon depth 55 mm Three-phase motor power 3.0 - 2.2 HP - KW Trolley dimensions 2200x315 mm Weight 580 kg Machining accuracy is second to none, and 3 independent motors allow for extremely efficient work. The function can be changed with just one flick of the switch. When cutting with a saw, a special sliding beam is used, as is the case with a panel saw. This technology allows for very high machining accuracy. The thicknesser is extremely efficient and accurate. The cast iron structure of the body allows for safe and effective processing of even large elements.

Condition: new, Year of construction: 2025, Edge thickness 0.4 - 3 mm Thickness of glued boards 12 - 45 mm Minimum length of glued boards 80 mm Gkjdpsv Dt Spjfx Ag Nsc Minimum width of glued boards 60 mm Mechanical feed speed 8 / 11 / 13 m/min. Glue temperature 185 - 210 ℃ Tank capacity 2.5 - 3 kg Pre-milling head speed, main 12,000 rpm Rounding radius R=2mm Working pressure compressed air pressure 6 - 8 bar Pre-milling unit 1.8 kW x 2 Glue application roller unit 0.75 kW Glue heating unit 1.5 kW Final milling unit 0.37 x 2 kW Main milling unit 0.75 kW x 2 Transport belt unit 1.5 kW Overall dimensions 3850 x 700 x 130 mm Weight 1000 kg Pre-milling: diamond cutter. Gluing Cutting Milling: two motors Radial scraper Flat scraper (glue) Spray system Polishing Interior lighting Automatic lubrication

Condition: new, Year of construction: 2025, Planer: Working table dimensions 400 x 1800 mm Cutting block diameter 70 mm Shaft rotation speed 5700 rpm The dimensions of the knives 400 x 20 x 3 mm Max. 4 mm table adjustment Thicknesser: Working table dimensions 400 x 760 mm Feed speed 7 m / min Working height 4 - 220 mm Bohring agregate: Working table dimensions 250 x 500 mm Longitudinal / transverse / vertical travel 205/95/90 mm Gkjdpfjg S Nx Dox Ag Njc Spindle (M18 * 1.5-S) 0-16mm General parameters: Three-phase motor power 4.0 - 3.0 HP - KW Weight 410 kg Machine has spiral roller Machine is extremely efficient and accurate. The cast iron structure of the body allows for safe and effective processing of even large elements.

Condition: new, Year of construction: 2025, Working width 300 mm Working length 1100 mm Brush diameter 190 mm Brush rotation speed 1500 rpm Spindle diameter 40 mm Number of brushes 2 pcs.(metal + plastic) Max. speed of the feeding belt + smooth adjustment 0 - 10 m / min. Working height 940 mm + 50 mm Max. material height 300 mm The diameter of the extraction port 2 x 120 mm Overall dimensions Length 1240 mm Height min / max 1350/1650 mm Width 950 mm Weight 435 kg Total power 4.65 kW Voltage 400V Massive casing, as a result, ensures high stability Working height 940 mm + 50 mm and max. 300 mm material height gives you the freedom to process large materials Gkjdpfogykaujx Ag Nsc Two independent brushes (steel, plaster) with powerful motors, with precise manual adjustment allow you to achieve high product quality Two independent extractors ensure smoothness of the removed sawdust and dirt The machine is made of high-class materials, which guarantees reliability high-quality workpieces Stepless speed control of the conveyor carpet allows you to achieve smoothness and intended productivity Optimat's many years of production experience allows us to meet the highest standards machine tool for every budget

Condition: new, Year of construction: 2025, 7.5 kW electric motor 400V capacity, 3 phases The maximum dimensions of the workpiece 790 x 178 x 2794 mm Cd3zuudzwy Cutting band dimensions 3960 x 34 x 0.9 mm Gsdpfjlk Dxhox Ag Nskc Belt speed 17 m / s Pitch between the teeth 22 mm Wheel diameter 480 mm Dimensions 4064 x 1778 x 1800 mm Track dimensions 4000 x 1030 mm Transport dimensions 2150 x 610 x 810 mm Weight 352/380 kg Additional 2 Meter section costs 350 euro without VAT electromotive height adjustment

Year of construction: 2025, condition: new, By installing the heaters, we have gained the possibility to speed up the gluing process. After the press has been heated up, the wrapping process takes 5 to 15 minutes. depending on the thickness of the veneer and the glued element. The process is widely used in factories producing furniture, windows, doors and coffins. The flexible membrane enables the gluing of both flat elements, such as: furniture sides, frames and stiles, as well as shaped elements, e.g. panels, door strips and bent fronts. Heaters power 2x2.5 = 5 kW Vacuum pump power 0.75 kW Working voltage 400V Number of phases 3 Operating voltage frequency 50 Hz Working vacuum - 0.8 ± 0.05 bar Working temperature 40-50 ± 5 ° С Maximum temperature 60 ± 5 ° С Length 3050 mm Width 1350 mm Height 1600 mm Protection degree IP2X Gkedpfx Aegp I Upjg Nsc Noise level ≤ 70 dB Weight 350-400 kg Vacuum pump capacity 25 m3 / h Working dimension 3000 x 1350 mm 700% stretch of the membrane Diaphragm thickness 2.7 mm (+/- 0.20 mm)

Condition: new, Year of construction: 2024, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 48 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 6-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. Gkodpfxsv Dvfrs Ag Nec The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.