Used Outdoor Silo for sale (1,361)

Condition: used, Year of construction: 2020, functionality: fully functional, overall weight: 2,041 kg, total length: 2,300 mm, total width: 1,380 mm, total height: 1,950 mm, power: 75 kW (101.97 HP), volume flow: 851 m³/h, pressure (min.): 5 bar, pressure (max.): 7 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 40 °C, noise level: 74 dB, protection type (IP code): IP54, Equipment: documentation/manual, refrigerant dryer, type plate available, For sale is a highly efficient, frequency-controlled screw compressor from the top-of-the-line range of the German manufacturer ALMiG, type V-DRIVE 75 (PLUS O version including heat recovery), first purchased at the end of 2020. This unit impresses with minimal energy costs thanks to its loss-free 1:1 direct drive, stepless speed control and integrated heat recovery (WRG). Technical data: Manufacturer: ALMiG Kompressoren GmbH Type: V-DRIVE 75 PLUS O including WRG Drive power: 75 kW Maximum pressure: 7 bar Volume flow: up to 14.18 m³/min (approx. 851 m³/h) Voltage: 400 V / 50 Hz Control system: ALMiG Aircontrol Premium (including RS 485, operating and fault messages) Dimensions (L x W x H): 2,300 x 1,380 x 1,950 mm Weight: 2,041 kg Equipment & special features: Installation in a special container: - Weather-protected outdoor installation directly on the company premises. - Generous, double-wing access doors for unrestricted maintenance access. - Integrated window with exterior roller shutter. - Standardized container corner fittings (ISO corners) for crane or lifting gear handling are available. Gsdpfxj Ahppds Ad Rjui - Integrated heat recovery (WRG): For direct use of waste heat for heating purposes or hot water. - Integrated refrigeration dryer (PLUS) & filter system (O): High compressed air quality directly from the compressor. - SCD frequency inverter & asynchronous motor (IP55): Stepless adaptation to demand, soft start without peak loads. - Sound-insulated: Extremely quiet operation thanks to optimized encapsulation and vibration-isolated installation. - Documentation: Complete documentation / manual available. Important sales & collection conditions: - Delivery condition: Sale is ex works (FCA). - Loading: No loading facilities available on site! - The removal must be organized by the buyer using a truck with a loading crane or a separate mobile crane (lifting equipment suitable for ISO container corners required). - The sale is made excluding any liability for defects and warranty. Subject to prior sale and errors.

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 227 kg, lifting height: 5,550 mm, platform length: 1,400 mm, platform width: 780 mm, empty load weight: 1,179 kg, transport length: 1,400 mm, transport width: 810 mm, transport height: 1,970 mm, construction height: 1,970 mm, fuel type: electric, tire size: 10 × 3 Zoll, wheelbase: 1,120 mm, ground clearance: 70 mm, color: blue, With a machine width of only 81 cm, the Genie GS-1932m E-Drive achieves a working height of up to 7.55 m indoors. This makes it suitable for work on lighting, cable trays, and pipes, even when there is limited space for maneuvering between shelves or machines. From the work platform, you control the lift to the next assembly point. The platform can be extended by 60 cm to a length of 2.00 m. This allows you to reach, for example, a light fixture above a shelf without having to position the lift directly below it. Indoors, two people can work on the platform. The total load capacity is 227 kg, including tools and materials. Technical data: - Year of manufacture: 2025 - Condition: New - Operating hours: 0 h - Maximum working height: 7.55 m indoors / 6.57 m outdoors - Maximum platform height: 5.55 m indoors / 4.57 m outdoors - Load capacity: 227 kg total, of which max. 113 kg on the platform extension Gusdpj Ai Dgajfx Ad Roi - Permissible number of persons: 2 indoors / 1 outdoors - Platform dimensions (L × W): 1.40 × 0.78 m, extended 2.00 × 0.78 m - Transport dimensions with railing installed (L × W × H): 1.40 × 0.81 × 1.97 m - Standard weight: approx. 1,179 kg - Drive: electric E-Drive travel drive with 24 V battery system - Tires: non-marking solid rubber tires - Internal equipment number: 3001 At HDM in Wolfsbach, you will receive rental, sales, service, and repair all from a single source. Lease purchase, financing, and the purchase of used machines are possible. Would you like a quote for the Genie GS-1932m E-Drive? Request it directly via Maschinensucher, by phone, or via WhatsApp. Please provide the equipment number 3001. HDM GmbH – Wolfsbach Safe working at any height.

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 227 kg, lifting height: 4,300 mm, platform length: 1,400 mm, platform width: 770 mm, empty load weight: 900 kg, transport length: 1,400 mm, transport width: 810 mm, transport height: 1,880 mm, construction height: 1,880 mm, fuel type: electric, tire size: 10 × 3 Zoll, wheelbase: 1,120 mm, ground clearance: 70 mm, color: blue, With the Genie GS-1432m E-Drive, you can reach a working height of up to 6.30 m indoors. This electric scissor lift is only 81 cm wide and can be controlled directly from the platform. This makes it easier to carry out assembly and maintenance work between rows of shelves, in workshops, and in narrow aisles. To install a light fixture or cable tray, the platform can be extended by 60 cm to a total of 2.00 m. This allows you to reach locations under which the lift cannot stand directly. Indoors, the platform is approved for two people. The total load capacity is 227 kg, including tools and materials. Technical data: - Year of manufacture: 2025 - Maximum working height: 6.30 m indoors / 5.66 m outdoors - Maximum platform height: 4.30 m indoors / 3.66 m outdoors - Load capacity: 227 kg total, of which max. 113 kg on the platform extension Gsdpfe Ai Dfvsx Ad Roui - Permissible number of persons: 2 indoors / 1 outdoors - Platform dimensions (L × W): 1.40 × 0.77 m, extended 2.00 × 0.77 m - Transport dimensions with railing installed (L × W × H): 1.40 × 0.81 × 1.88 m - Weight in standard configuration: approx. 900 kg - Drive: electric E-Drive with 24 V battery system - Tires: non-marking solid rubber - Inner turning radius: 0 m At HDM in Wolfsbach, you can get rental, sales, service and repair all from one source. Lease purchase, financing and the purchase of used machines are possible. Would you like a quote for the Genie GS-1432m E-Drive or want to know if it is suitable for your application? Contact us via Maschinensucher, by telephone or via WhatsApp. HDM GmbH – Wolfsbach Safe working at any height.

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 227 kg, lifting height: 9,600 mm, platform length: 2,160 mm, platform width: 780 mm, empty load weight: 2,451 kg, transport length: 2,360 mm, transport width: 810 mm, transport height: 2,000 mm, construction height: 2,520 mm, fuel type: electric, tire size: 15 × 5 Zoll, Vollgummi, wheelbase: 1,780 mm, ground clearance: 130 mm, color: blue, The Genie GS-3232 E-Drive offers over 11 m of working height indoors, making it ideal for work on indoor lighting, ventilation, and cable trays. With a machine width of only 81 cm, this electric scissor lift can also be positioned in narrow aisles and between production facilities. At the work site, the integrated supports level the platform for work at great heights. The 91 cm long platform extension is particularly useful when a shelf or machine blocks the space directly under the work area. Indoors, the platform is approved for two people. A total lifting capacity of 227 kg is available for people, tools, and materials. Technical data: - Year of manufacture: 2026 - Condition: New - Working height indoors: over 11 m - Machine width: 0.81 m - Lifting capacity: 227 kg total, of which max. 113 kg on the platform extension - Permissible number of people: 2 indoors / 1 outdoors - Platform extension: 0.91 m - Drive: electric E-Drive with 24 V battery system - Equipment: integrated support and non-marking solid rubber tires Guodpj Ai Dlisfx Ad Rji - Internal device number: 3455 At HDM in Wolfsbach, you can get rental, sales, service, and repair all from one source. Lease-to-own options, financing, and the purchase of used machines are possible. Would you like a quote for the Genie GS-3232 E-Drive? Please inquire via Maschinensucher, by telephone, or via WhatsApp. Please provide the device number 3455. HDM GmbH – Wolfsbach Safe work at any height.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 6,230 h, load capacity: 4,000 kg, lifting height: 6,500 mm, free lift: 2,100 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 3,250 mm, motor manufacturer: PERKINS, gearing type: hydrostat, fork carriage width: 1,250 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 250-15, overall weight: 11,400 kg, empty load weight: 7,400 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,250 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, HUBTEX DQ40D – 2012 | 6,230 OPERATING HOURS | DIESEL | TRIPLEX 6,500 mm | FORK POSITIONER | FREE-LIFT 🚜 Ready to work from day one – no investment, no risk 🚀 --- Why choose this forklift? 🤔 Guedpfxe Ai S Srs Ad Rei Are you looking for a machine that won't interrupt your workflow? ⏱️ This HUBTEX DQ40D is a proven unit after comprehensive servicing – ready for immediate operation. No hidden fees. 💼 ✔ major service completed (oil, filters, complete inspection of all components) 🔧 ✔ technical and aesthetic condition: like new ✨ ✔ only 6,230 operating hours – very low mileage 📊 ✔ new tyres – no further investment needed 🛞 --- Key specifications ⚙️ * Capacity: 4,000 kg ⚖️ * Power: DIESEL ⛽ * Mast: Triplex – 6,500 mm 📏 * Fork positioner: 1,250 mm ↔️ * Forks: 1,200 mm * Cabin: full, heated 🔥 --- Full technical specification 📋 General data: * Year of manufacture: 2012 📅 * Operating hours: 6,230 * Capacity: 4,000 kg * Load center: 600 mm * Weight: 7,400 kg Mast & lifting: * Mast type: Triplex * Lifting height: 6,500 mm Forks & attachments: * Fork positioner: 1,250 mm * Forks: 1,200 mm Dimensions: * Height: 2,600 mm * Length: 2,500 mm * Width: 2,250 mm * Closed height: 3,250 mm Chassis: * Tyres: superelastic (100%) – new 🛞 * Front: 200x50-10 * Rear: 250-15 Equipment: * Full heated cabin 🔥 * Wide fork positioner ↔️ * Lighting 💡 * Free lift Condition: * Technical: 5/5 – post full service ✅ * Aesthetic: refurbished, like new, no corrosion ✨ --- Ideal for 🏭 ✔ narrow aisle warehouses 📦 ✔ timber, steel, and pipe industries 🪵 ✔ long load handling 📏 ✔ indoor and outdoor applications 🌦️ --- What you get 💼 You’re not buying a “used forklift.” You’re buying a fully prepared, ready-to-work machine: ✔ every machine is fully tested before sale 🔍 ✔ ready for immediate deployment 🚀 ✔ live online demonstrations available 💻 ✔ transport to your facility provided 🚛 --- Delivery and support 🌍 * transport across Europe * comprehensive logistics support * assistance with leasing/financing 💰 * after-sales support 🤝 --- Why FT LOGISTICS? 💪 We deliver forklifts that perform – not machines that stay in the workshop. ✔ over 100 units available 📊 ✔ in-house servicing and preparation 🔧 ✔ pan-European experience 🌍 ✔ hundreds of satisfied clients ⭐

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 4,875 h, load capacity: 5,000 kg, lifting height: 3,250 mm, free lift: 1,450 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,650 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,350 mm, fork length: 1,200 mm, fork width: 200 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 8.25 - 15, rear tire type: superelastic tires (black), rear tire size: 8.25 - 15, overall weight: 12,500 kg, empty load weight: 7,500 kg, total height: 2,650 mm, total length: 4,650 mm, total width: 2,050 mm, color: yellow, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, all wheel drive, cabin, front guard, head guard, hydraulic fork positioner, lighting, pallet forks, 🚜 COMBILIFT C5000FSL | DUPLEX 4040 MM | DIESEL | READY TO WORK ✅ FULLY SERVICED MACHINE | WARRANTY | TRANSPORT THROUGHOUT EUROPE & WORLDWIDE 🌍 If you are looking for a forklift that will start generating profits from day one, rather than incurring additional service costs, this offer is for you. We are offering a fully inspected and professionally prepared COMBILIFT C5000FSL side loader. The machine has undergone a complete technical inspection, full service, and comprehensive operational testing, and is ready for immediate use in a production facility, warehouse, or logistics center. ⭐ KEY ADVANTAGES 🔧 Full service completed before sale 🛡️ Start-up warranty 🛞 New Super Elastic tires ✨ Very good technical and visual condition ✅ Ready to work without additional investment 🎥 Live online video presentation available 🚛 Direct delivery available throughout Europe 📋 TECHNICAL SPECIFICATION 🏭 Manufacturer: COMBILIFT 🔹 Model: C5000FSL 📅 Year of manufacture: 2015 🏋️ Load capacity: 5,000 kg ⛽ Engine: DIESEL ⏱️ Operating hours: 2,247 h ⬆️ Mast: DUPLEX 📏 Lift height: 4,040 mm ↔️ Fork positioner: 1,350 mm 🍴 Fork length: 1,200 mm 🔥 Cabin: Full and heated ⚖️ Machine weight: 9,500 kg 📐 DIMENSIONS ↕️ Overall height: 2,700 mm ↔️ Length: 4,650 mm ↔️ Width: 2,100 mm 📏 Mast closed height: 2,950 mm 🛞 TIRES Front: 8.25-15 Super Elastic – 100% Rear: 8.25-15 Super Elastic – 100% ✅ Tire condition: 100% NEW ⚙️ EQUIPMENT 🔧 Central lubrication system 🔥 Full heated cabin 💡 Working lights 🚨 Warning beacon 💺 Adjustable seat 🌧️ Windscreen wipers ⚙️ Third and fourth hydraulic valve 📄 CE certificate 📘 Operator manual 🏗️ IDEAL FOR 🪵 Timber industry 🏭 Steel mills and steel warehouses 🔩 Steel structure manufacturers 📦 Handling pipes, profiles, and long materials 🏢 Indoor and outdoor operation 💼 WHY FT LOGISTICS? When buying from FT LOGISTICS, you are purchasing from a company specializing in forklifts, side loaders, multidirectional forklifts, and warehouse equipment. Every machine undergoes a detailed technical inspection, full service, and operational testing before delivery to the customer. 🚜 More than 200 machines available in stock 🌍 Delivery throughout Europe and worldwide 🤝 WE PROVIDE 🔧 Full service before sale 🛡️ Warranty 👨‍🔧 Professional technical advice 💶 Leasing and financing options 🚛 Transport organization 🌍 Export support and customs documentation 🛠️ After-sales support Hundreds of customers across Europe have trusted our machines and return to us for further purchases. Gsdpfo Aik N Asx Ad Roui 🎥 We can arrange a live online presentation of the machine, provide additional photos and videos, and prepare an individual transport quotation directly to your company. 🚜 FT LOGISTICS ✅ WE DELIVER MACHINES READY TO WORK

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 4,875 h, load capacity: 5,000 kg, lifting height: 3,250 mm, free lift: 1,450 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,650 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,350 mm, fork length: 1,200 mm, fork width: 200 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 8.25 - 15, rear tire type: superelastic tires (black), rear tire size: 8.25 - 15, overall weight: 12,500 kg, empty load weight: 7,500 kg, total height: 2,650 mm, total length: 4,650 mm, total width: 2,050 mm, color: yellow, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, all wheel drive, cabin, front guard, head guard, hydraulic fork positioner, lighting, pallet forks, 🚜 COMBILIFT C5000FSL | DUPLEX 4040 MM | DIESEL | READY TO WORK ✅ FULLY SERVICED MACHINE | WARRANTY | TRANSPORT THROUGHOUT EUROPE & WORLDWIDE 🌍 If you are looking for a forklift that will start generating profits from day one, rather than incurring additional service costs, this offer is for you. We are offering a fully inspected and professionally prepared COMBILIFT C5000FSL side loader. The machine has undergone a complete technical inspection, full service, and comprehensive operational testing, and is ready for immediate use in a production facility, warehouse, or logistics center. ⭐ KEY ADVANTAGES 🔧 Full service completed before sale 🛡️ Start-up warranty 🛞 New Super Elastic tires ✨ Very good technical and visual condition ✅ Ready to work without additional investment 🎥 Live online video presentation available 🚛 Direct delivery available throughout Europe 📋 TECHNICAL SPECIFICATION 🏭 Manufacturer: COMBILIFT 🔹 Model: C5000FSL 📅 Year of manufacture: 2015 🏋️ Load capacity: 5,000 kg ⛽ Engine: DIESEL ⏱️ Operating hours: 2,247 h ⬆️ Mast: DUPLEX 📏 Lift height: 4,040 mm ↔️ Fork positioner: 1,350 mm 🍴 Fork length: 1,200 mm 🔥 Cabin: Full and heated ⚖️ Machine weight: 9,500 kg 📐 DIMENSIONS ↕️ Overall height: 2,700 mm ↔️ Length: 4,650 mm ↔️ Width: 2,100 mm 📏 Mast closed height: 2,950 mm 🛞 TIRES Front: 8.25-15 Super Elastic – 100% Rear: 8.25-15 Super Elastic – 100% ✅ Tire condition: 100% NEW ⚙️ EQUIPMENT 🔧 Central lubrication system 🔥 Full heated cabin 💡 Working lights 🚨 Warning beacon 💺 Adjustable seat 🌧️ Windscreen wipers ⚙️ Third and fourth hydraulic valve 📄 CE certificate 📘 Operator manual 🏗️ IDEAL FOR 🪵 Timber industry 🏭 Steel mills and steel warehouses 🔩 Steel structure manufacturers 📦 Handling pipes, profiles, and long materials 🏢 Indoor and outdoor operation 💼 WHY FT LOGISTICS? When buying from FT LOGISTICS, you are purchasing from a company specializing in forklifts, side loaders, multidirectional forklifts, and warehouse equipment. Every machine undergoes a detailed technical inspection, full service, and operational testing before delivery to the customer. 🚜 More than 200 machines available in stock Guedpfx Ads Aik Nxs Rji 🌍 Delivery throughout Europe and worldwide 🤝 WE PROVIDE 🔧 Full service before sale 🛡️ Warranty 👨‍🔧 Professional technical advice 💶 Leasing and financing options 🚛 Transport organization 🌍 Export support and customs documentation 🛠️ After-sales support Hundreds of customers across Europe have trusted our machines and return to us for further purchases. 🎥 We can arrange a live online presentation of the machine, provide additional photos and videos, and prepare an individual transport quotation directly to your company. 🚜 FT LOGISTICS ✅ WE DELIVER MACHINES READY TO WORK

Condition: used, fuel type: electric, General information Year of manufacture: 2012 Weights Empty weight: 6.750 kg Functional Mast: articulated arm Lifting capacity: 225 kg Working height: 1.560 cm Dimensions of cargo space: 600 x 150 x 210 cm CE mark: yes Condition General condition: poor Technical condition: poor Visual appearance: poor Other information Delivery terms: EXW Max. horizontal reach: 960 m Production country: UK Guodpfx Ado Ai Eb Re Rji Additional information Please contact Christian Theißen for more information Manufacturer: Nifty Lift Model: HR 15 NE Year of build: 2012 Condition: Used Data: Max. working height: 15,60 m Movable up to working height: 15,60 m Max. platform height: 13,60 m Max. reach: 9,60 m Drive type: Battery Platform dimensions LxW: 1,50 x 0,75 m Max. basket load: 225 kg Transport dimensions LxWxH: 6,00 x 1,50 x 2,10 m Overhang: 0,02 m Gradeability: 25 % Ground clearance: 0,17 m Empty weight: 6.750 kg Special features: white tires, rotating work basket, basket arm/vertical rotation angle 150°, indoor and outdoor use, tie-off points for PPE available. Information: No function, battery is fine. Price on demand Location: 12681 Berlin immediately available

Condition: new, Mobile Culinary Container: Bar, Bistro & Lounge – All in One Godpfx Ads Ai St To Rjui Transform any location into a hotspot with this high-quality catering container that combines functionality and modern design. This model is much more than just a sales stand – it's an inviting venue that encourages guests to linger. The Interior: Well-Conceived and Inviting Central Bar: The centerpiece of the container is the attractively designed bar area. Stylish pendant lamps in an industrial design provide the perfect lighting atmosphere above the bar, enhancing the modern look. Cozy Seating Lounge: The left side of the interior is designed as a comfortable seating lounge. Guests can enjoy drinks and food in a relaxed atmosphere here. The combination of soft cushions and the warm color creates a high level of comfort. Directly to the right of the entrance is this versatile piece of furniture that can be flexibly used as a counter, service station, or even a checkout area. Flexible Bistro Tables: Opposite the bar, directly in front of the large window front, are bistro tables with matching chairs. This area offers a great view of the outside and is ideal for a quick coffee or snack. Highlights at a Glance: Full-Surface Glass Front: The generous glazing across the entire front creates a bright, light-filled atmosphere inside and makes the space appear larger. At the same time, it offers passersby an attractive view and entices them to visit. Additional Outdoor Area: The container is designed so that it can be perfectly expanded with an outdoor area. Matching tables and chairs for outdoors (as shown in the picture) are the ideal complement to increase capacity and attract guests in good weather. Whether as a trendy coffee bar, an exclusive cocktail stand at events, a food station at festivals, or a pop-up restaurant in the city – this catering container is the ideal companion for mobile catering concepts that value quality and atmosphere. Give your catering business a mobile home that inspires. Contact me for more details and to arrange a viewing! I hope you like this description! You can, of course, adapt or supplement it to your liking, e.g., with specific dimensions or technical details. Price is plus delivery of 1,500.00 euros net within Germany.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 10,649 h, load capacity: 7,000 kg, lifting height: 5,000 mm, free lift: 1,250 mm, load center: 700 mm, fuel type: diesel, mast type: duplex, construction height: 3,750 mm, motor manufacturer: PERKINS, fork carriage width: 1,500 mm, fork length: 1,400 mm, fork width: 200 mm, fork thickness: 70 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 10.00-20 SE, rear tire type: superelastic tires (black), rear tire size: 10.00-20 SE, overall weight: 19,400 kg, empty load weight: 12,400 kg, total height: 3,400 mm, total length: 5,000 mm, total width: 2,300 mm, color: yellow, Equipment: cabin, lighting, pallet forks, 🚜 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 📌 Years of experience | 🛠️ In-house service & paint shop | 💼 Professional consultancy | 🚚 Own transport | 🤝 After-sales support Looking for a forklift you can truly depend on? We are an established dealer of new and used forklifts with a longstanding tradition. We serve clients throughout Europe – from small companies to major international industrial facilities. Our forklifts are more than just machines – they are a guarantee that your logistics will operate smoothly and reliably. ⭐ What sets us apart? ✅ Every forklift undergoes a thorough technical inspection (servicing, testing, filter and oil replacement, refurbishment of main components) ✅ Full safety inspection (UDT) available on request ✅ In-house paint and service workshop – machines perfected aesthetically and technically ✅ Europe-wide transport – performed with our own fleet and trained drivers ✅ Operator training at delivery + practical on-site demonstration ✅ After-sales service & technical support – support continues after the sale ✅ Possibility to visit & test the machine at our premises – you are welcome! ✅ Hundreds of satisfied customers across Europe – join those who already trust us ✅ Financing assistance – we cooperate with most leasing companies ✅ Invoice in EUR or PLN – as per customer preference 🔹 Current Offer: BAUMANN GS 70/14/50 – 7 T Side Loader 📅 Year of manufacture: 2007 ⏱️ Operating hours: 10,649 h ⚡ Power: Diesel 🏋️ Capacity: 7,000 kg – load centre 700 mm 🗜️ Mast: Duplex – 5000 mm 🔧 Forks: 1200 mm 🛞 Superelastic tyres: 100% condition 🛠️ Technical condition: Excellent – after full service ✨ Visual condition: Well-maintained, rust-free, ready for work 📏 Free lift: 1250 mm Dimensions: 📐 Truck height: 3400 mm 📐 Total length: 5000 mm 📐 Width: 2300 mm 📐 Fork positioner width: 1500 mm 📐 Overall height: 3750 mm 🏭 Ideal applications: Warehouses with narrow aisles Wood, steel, and pipe industries Handling of long goods Both indoor and outdoor operations Guedpfx Ade Akdnys Rei

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 570 h, load capacity: 230 kg, empty load weight: 6,300 kg, construction height: 2,470 mm, fuel type: diesel, total length: 4,440 mm, drive type: Diesel, arm reach: 9,100 mm, construction width: 2,320 mm, working height: 16,000 mm, Articulating Boom Lift Condition: As new Technical Condition: Very good Front Tyre Type: Solid rubber Front Tyre Size: 18 Front Tyre Condition: 80 - 100% Rear Tyre Type: Solid rubber Rear Tyre Size: 18 Rear Tyre Condition: 80 - 100% Description: The Manitou 160 ATJ articulated boom lift is ideal for outdoor operations on uneven or unpaved surfaces such as construction sites, gravel, or grassy areas. With a lift capacity of 230 kg, an articulating height of 7.38 m, and a working height of 16 m, it offers extensive outreach. Its diesel engine, combined with four-wheel drive and three steering modes, provides the 160 ATJ with outstanding performance and autonomy. Gusdpfxe Admdxo Ad Roi

Condition: used, mileage: 39,300 km, power: 107 kW (145.48 HP), first registration: 01/2017, fuel type: diesel, overall weight: 5,600 kg, next inspection (TÜV): 06/2026, color: blue, gearing type: mechanical, emission class: euro6, Equipment: ABS, all wheel drive, soot filter, Your MULTICAR authorized dealer, with expertise, service, and advice, offers you: MULTICAR FUMO CARRIER 4x4 with snowplow + spreader Initial registration: January 24, 2017 Mileage: 39,300 km / 2,693 operating hours Condition: Inspected, oils, filters, and wear parts renewed, workshop-checked, visually and technically completely refurbished, newly preserved Equipment: - 3.0 liter Iveco turbo diesel, low emission according to Euro VI, 107 kW / 145 hp - short wheelbase (2,930 mm) - 4x4 drive including crawler gear - 10 forward and 2 reverse gears - Power steering - Fully synchronized 5-speed manual transmission (90 km/h) Additional equipment: - 2-circuit mobile hydraulics H03-3 with simultaneous control of the working circuits - Leak-proof, flat-sealing quick-release couplings - Rear hydraulic connections - Leak oil line at the front, socket at the front - Quick-change mounting frame SWV 500 - Increased load capacity to 5,600 kg gross weight, reinforced front axle 2.7 t and rear axle 3.8 t - Tires 285 / 65 R16 M+S - Light bar on the cab roof with adjustable auxiliary headlights and work lights (for use with front-mounted equipment) - LED rotating beacon, telescopic - LED work lights at the rear - Equipment mounting kit 2, snow removal function - Electrically heated and adjustable exterior mirrors, electric windows - CD radio with MP3 function, FM, RDS, mute, Bluetooth - interior mirror, comfort steering wheel - Ball head - trailer coupling (3.5 t trailer load) - Driver and passenger - suspension seat, headrests - Warning marking red - white, 1 set = 4 pieces Three-way tipper 2,720 x 1,495 x 400 mm with angled steel front wall extension Optional winter service attachments: Gusdpez Iidisfx Ad Rei Snowplow SIMED Type PMS 170 - 1 (year of manufacture 2019) net price 1,750,- € Total width 2.00 m, clearing width in oblique position approx. 1.70 m, blade height 0.60 m, hydraulically pivotable, quick-change attachment, overload protection by deflection spring, rubber scraper strip, warning marking, warning flags Flatbed spreader KIF SS - 1200 / E (year of manufacture 2011) net price 4,500,- € Filling volume 1,200 l Equipped with 2 conveyor screws and rotary spreader Spreader and chute made of stainless steel, incl. folding roof, protective grille, warning marking, "winter service", adjustable spreading rate and spreading width via control panel in the cab, spreading width from 1-6 m, spreader stop when vehicle stops, 4 support legs or Spreader superstructure FIEDLER FSS 1100 (year of manufacture 2020) net price 6,900,- € Filling volume 1,200 l Equipped with conveyor screw and rotary spreader Spreader and chute made of stainless steel Incl. folding roof, protective grille and spreader lighting Adjustable spreading rate and spreading width via control panel in the cab Spreading width adjustable from 1-6 m Spreader stop when vehicle stops 4 support legs Other models of winter service equipment are in stock. Errors, changes and prior sale reserved. Our general terms and conditions apply. Benefit from our many years of experience in sales + service and have us create an individual offer for you. Also take advantage of our leasing and financing options. We promise you competent advice and support from our qualified staff. You can find more offers from the commercial vehicle manufacturers MULTICAR and ISUZU as well as an extensive range of attachments at: Tel.:

Condition: used, Year of construction: 2019, Overview Complete 10 hl craft brewery around a BBC INOX Essential 1000 steam-heated two-vessel brewhouse, installed in 2019. One package from milling to bottling: brewhouse, hot liquor, wort cooling, steam and water treatment, fermentation with glycol cooling, filling, labelling and capping, a walk-in cold room for bottle conditioning, plus handling and cleaning equipment. Suited to a new brewery or a brewpub moving up to 10 hl; fermentation capacity can be extended. Technical data - Brew length: 10 hl (1,000 L) per brew - Brewhouse: 2 vessels, AISI 304, steam-heated - Fermentation: 3 x 18 hl gross (approx. 15 hl working), AISI 316, atmospheric - Cellar output: approx. 700-800 hl/year with 3 fermenters on 3-week cycles - Year: 2019 Scope of Delivery - Brewhouse | BBC INOX | ESSENTIAL 1000 | mash/boil kettle 1,600 L, steam-heated, whirlpool inlet; lauter tun 1,300 L with false bottom and rake; AISI 316 wort pump, grant, platform and stairs; control panel with 15 recipes | 2019 - Hot liquor tank | 2,000 L | AISI 304, internal steam coil, CIP spray ball, manway, level gauge, pump; approx. H 3,100 x D 1,270 mm - Plate heat exchanger | Kelvion | NT 25 PH | AISI 316 plates, 2,000 L/h, wort 98 to 12.8 °C - Cylindro-conical fermenters, 3 units | BBC INOX | 18 hl | AISI 316, 60° cone, dual-zone glycol jackets, individual temperature controllers, CIP spray ball, sampling valve - Glycol chiller | outdoor monobloc, glycol down to -5 °C, buffer tank and circulation pump - Steam generator | process steam for brewhouse and hot liquor tank - Water softener | ion-exchange column with brine tank - Bottling / priming tank | BBC INOX | AISI 304/316, polished, level gauge - Linear gravity bottle filler | 6 filling spouts, 480 L/h, 33 / 50 / 75 cl, AISI 304 on trolley - Semi-automatic labeller | OMB | front and back label on round bottles, photocell, 230 V | 2019 - Crown capper | AIR-MATIC | pneumatic column capper, 26 / 29 mm crowns - Walk-in cold room | 5.30 x 3.10 x H 2.50 m, dismountable panels, +2 to +10 °C - Malt mill | two hardened-steel rollers, adjustable gap, 25 kg hopper, 1.5 kW - Digital floor scale | stainless steel low-profile platform, tare and dosing - Semi-electric stacker | Jungheinrich | HC 110 | 1,000 kg, lift height 1,600 mm, 12 V, integrated charger | 2019 - Manual hydraulic stacker | BASIC | D 1025 | 1,000 kg, fork lift 85-2,500 mm - Floor scrubber-dryer | Lindhaus | LW 38 PRO - Stainless steel workbench | AISI 304, 200 x 70 x H 85 cm - Wire-mesh storage baskets | foldable, stackable, 112 x 77 x H 95 cm - Food-grade hoses and stock | hoses with DIN fittings; approx. 1,600 empty bottles, 250 cartons, 3 x 20 L kegs, 2,000 crown caps Condition Used, visually very good, clean installation, still installed and under power. The fermenters are atmospheric: carbonation by bottle conditioning or via an additional pressure tank. Chiller, cold room and steam generator must be disconnected by certified technicians. Gsdpoz E U Diefx Ad Rjui Availability Immediately. Location: Italy. Dismantling and loading by the buyer. The brewhouse, hot liquor tank and heat exchanger are also available as a separate package.

Condition: new, functionality: fully functional, Year of construction: 2025, SCHORR RR1000KB PETROL-POWERED SWEEPER INCLUDING SNOW BLADE AND COLLECTION CONTAINER SWEEPING MACHINE PETROL ◾ Impressive cleaning performance for outdoor applications ◾ Powerful 6.5 HP 4-stroke petrol engine – ready to use even in cold weather ◾ Robust sweeper with 100 cm working width – ideal for large courtyards, paths & expansive areas ◾ Includes snow blade, collection container & snow chains – suitable for year-round use, including winter maintenance ◾ Effortless operation – user-friendly, requires minimal effort ◾ Adjustable brush angle (left / right / straight) – efficient cleaning in all directions ◾ 3 forward gears & 1 reverse gear for optimum maneuverability ◾ Large-tread pneumatic wheels with differential lock – excellent grip on any surface ◾ Fully supported: Guaranteed spare parts supply & workshop service Maximum cleaning performance – all year round The SCHORR RR1000KB is a high-performance petrol sweeper, providing versatile all-round support on farmyards, walkways, or company premises. With a reliable 4-stroke petrol engine (196 cm³), you remain independent of weather or mains power – simply start up and go, even in frosty conditions. 100 CM SWEEPING WIDTH FOR LARGE AREAS & PRISTINE RESULTS Thanks to its wide sweeping brush with wear-resistant synthetic bristles, this petrol broom easily handles leaves, dirt, grit, spreading material, or even snow. The sweeper is perfectly suited for year-round use on driveways, pavements, forecourts, or industrial yards. The brush rotation is powerful and consistent, ensuring even compacted dirt is thoroughly removed. Built for tough outdoor applications Coarse-tread pneumatic tyres with differential lock guarantee optimal traction, even in damp or icy conditions. The robust steel frame delivers outstanding resistance to impacts and vibrations – ideal for daily, intensive use. Designed with maintenance in mind: all key components are easily accessible. COMPLETE SOLUTION WITH SNOW BLADE & COLLECTION CONTAINER Supplied with a heavy-duty snow blade featuring a rubber edge, which can be installed in just a few steps. Matching snow chains for both drive wheels are also included in the delivery. Also convenient: the large debris collection container efficiently gathers swept material. This saves time and effort, as no follow-up sweeping is needed. The motorised sweeping broom features a reliable 4-speed transmission with 3 forward and 1 reverse gear, allowing you to select the ideal speed and direction at any time. The brush unit is pivotable. Technical Data Gujdsw Af I Sjpfx Ad Rji Manufacturer (Short Code): SCHORR Manufacturer’s Model: RR1000KB Fuel type: Petrol Engine: 1 cylinder 4-stroke petrol OHV Power: 6.5 HP Main brush diameter: 1000 mm Brush rotation speed: 180 - 350 rpm Starter: Recoil starter Weight: 81 kg Main Dimensions Overall length: 1480 mm Overall width: 1100 mm Overall height: 1250 mm

Condition: new, functionality: fully functional, ✅ New stock ✅ €4,179 incl. VAT ✅ Available immediately ✅ Shipping possible Gusdpexvbw Tjfx Ad Rsi The SCHORR RR1000DHKB crawler dumper is a powerful and versatile mini dumper with hydraulic tipping drive and a payload capacity of up to 1,000 kg. Powered by a 15 HP single-cylinder 4-stroke petrol engine, it effortlessly tackles rough terrain and inclines. The self-propelled dumper is equipped with a robust track drive, ensuring a secure stand and optimal traction. The generous loading platform allows for the transport of Euro pallets, even with sidewalls closed. The hydraulic tipping skip makes unloading considerably easier, while the automatic front-opening of the skip ensures complete emptying without manual assistance. Removable side panels make the platform flexibly extendable, allowing for easy transport of larger or bulky loads. Thanks to the intuitive crawler drive, the dumper can be maneuvered safely and precisely even on uneven ground. The foldable ride-on platform enables comfortable travel over longer distances, and the 6+2 speed gearbox ensures precise control and speed adjustment. With a maximum forward speed of 6 km/h and reverse speed of 3 km/h, complex maneuvers on the construction site are easily managed. The RR1000DHKB is designed for outdoor use, combining robust construction with user-friendly operation. The engine features a recoil starter, and all fluids—fuel, hydraulic oil, and gear oil—are easily accessible for maintenance and refilling. Dimensions: Total length 2240 mm, width 900 mm, height 1235 mm. The skip measures internally 1315 × 815 × 300 mm, externally 1390 × 880 × 300 mm, filling height closed 785 mm, and 485 mm without side panels. SCHORR provides comprehensive service: spare parts are always available, and repairs can be carried out in our workshop if necessary. Our team is available to answer your questions or offer advice regarding the RR1000DHKB crawler dumper. This dumper offers excellent value for money, is available immediately, and—thanks to its compact design and high payload—is the ideal solution for small to medium construction sites, landscaping, and industrial applications. We are happy to advise you and assist with any questions regarding the SCHORR RR1000DHKB crawler dumper.

Condition: new, Year of construction: 2024, The SCHORR RR500 DHKB 2 PRO track dumper is a versatile machine powered by a powerful 270 cm3 4-stroke petrol engine with 9.2 hp. This power enables the dumper to operate effortlessly even in outdoor applications and offers sufficient power for demanding tasks. Advantages of the SCHORR RR500DHKA2 track dumper: -- Powerful 9.2 hp four-stroke engine -- Robust chain drive for high traction -- 500 kg payload -- Removable side walls for more loading volume -- Automatic opening of the front when tipping -- Folding ride-on platform as standard -- 6 forward and 2 reverse gears The box body made of robust sheet steel is equipped with removable side walls so that the loading area can be flexibly enlarged and tipping operations are possible without any problems even on slight inclines. A generous tipping angle ensures that even fully loaded skips can be emptied completely without the need for manual assistance. A major advantage of the dumper is the automatic opening of the front of the tipper body during the tipping process. This ensures particularly easy and convenient unloading, even when fully loaded. The hydraulic tipping drive enables the tipper body to be raised and lowered effortlessly, while the extra-large hydraulic oil tank with integrated oil filter extends the service life of the machine and reduces maintenance requirements to a minimum. The powerful track drive ensures that even uneven terrain, inclines and kerbs can be mastered with ease. The durable rubber tracks provide a secure footing in any working environment. Technical data: Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR500 Model: DHKB2 Load capacity: 500kg Tilt drive: Hydraulic (stepless) Travel drive: Chain Weight without/with packaging: 305kg / 335kg Drive system Engine: Air-cooled 1 cylinder four-stroke engine (OHV) Starter: Reversing starter Power: 9,2PS Gearbox: 6 forward gears / 2 reverse gears Speed: forward gear Forward gear: max. 8km/h Reverse gear: max. 5 Godpfxou Th Ekj Ad Rjui Liquids Fuel tank capacity: 6L (unleaded petrol) Hydraulic oil tank capacity: 3L (ISO VG 32) Transmission oil capacity: 1.5L (SAE 80W-90) Engine oil tank capacity: 0.9L (15W-40) Basic dimensions Overall length platform folded: 1870mm Overall length platform unfolded: 2105mm Overall width (incl. chain): 770mm Overall height: 1050mm Container dimensions (inside): 1040 x 700 x 300mm Container dimensions (outer dimensions): 1100 x 755 x 310mm Load volume (painted): ~ 218L Load volume (heaped): up to 500L (depending on load) Drive chain dimensions: 180 x 60 x 38mm Packaging size: 1600 x 770 x 1270mm Filling height with walls: 740mm without: 445mm It goes without saying that all spare parts are always in stock and available quickly if required. If technical support is required, our trained team is at your side. We can also carry out repairs for you in our own workshop. We at SCHORR will be happy to answer any questions you may have about our motorized wheelbarrows. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: used, Year of construction: 2015, operating hours: 38,000 h, functionality: fully functional, power: 70 kW (95.17 HP), 1. HKW Kuntschar + Schlüter GTK70 (70 kW electrical, MAN E0836E engine, year of manufacture 2015, in use from Q1 2020, approx. 38,000 hours, manufacturer overhaul, regular full maintenance by the manufacturer, maintenance documentation available for inspection, fully functional, out of service since 10/12/2026. Current maintenance is pending. Gusdpfx Adjz Tdfgs Rsi 2. Gas condensing boiler Wolf MGK-2-470 (~200 kW real load, max. 467 kW, approx. 11 years old), used as a peak load boiler. 3. Buffer tank approx. 8,000 liters (with insulation, approx. 11 years old). 4. Expansion tank Reflex Type N600 (600 liters): On request: Soundproof enclosure (multi-layer panels, steel frame, approx. 60 m², outdoor installation, supply/exhaust air).

Condition: used, axle configuration: 3 axles, first registration: 09/2005, total length: 12,400 mm, total width: 2,450 mm, total height: 3,900 mm, suspension: air, tire size: 385/65R22,5, color: other, Equipment: ABS, = Additional options and accessories = - EBS - Hydraulic system - Aluminum rims - Pump = Notes = Number of axles: 3, Tare weight: 6700 kg, Gross vehicle weight: 38000 kg, Chassis type: Full chassis, Chassis material: Aluminum, Kingpin size: 2 inch, Aluminum rims, Suspension type: Air suspension, ABS, EBS, Hydraulic system, Body construction year: 2005, Drum volume: 63, Drum volume in: m3, Compartment division: 1 compartment, Cargo type: Silo, Pump, Axle type: ROR = Further information = General information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual transmission Axle configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 8 mm; Tire tread depth right: 8 mm Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 8 mm Axle 3: Tire tread depth left: 6 mm; Tire tread depth right: 7 mm Weights Tare weight: 6,700 kg Payload: 31,300 kg GVW: 38,000 kg Functional Pump: Yes Environmental Emission class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none = Company information = Guodpfx Adez Tiu He Rsi Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands from various years and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: AA2328995, total height: 2,495 mm, total width: 2,280 mm, total length: 10,500 mm, overall weight: 6,000 kg, Equipment: documentation/manual, For sale is a dry cooler (air-cooled liquid cooler with forced convection) designed for outdoor installation. Air is passed over the finned heat exchanger, which contains the working fluid, for example, a water-glycol mixture. Alfa Laval VDDSE1008.1CD96 C4 ICM Dimensions approximately 10.5m x 2.28m x 2.95m (no heavy-duty transport required for transportation) Godsz S U Naspfx Ad Rjui Weight approximately 6 tons Cooling capacity 866.8 kW Airflow: 217476 m³/h Volume flow rate of cooling medium: 150.8 m³/h A cooling unit is being sold – it has already been dismantled and is ready for loading. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: new, Construction fence with Douglas fir wood panel – durable, robust, and easy to maintain. Robust construction fence with a hot-dip galvanized and hand-welded steel frame, combined with a Douglas fir wood panel. Thanks to the galvanized finish, the frame is highly resistant to rust and weather conditions, making it suitable for long-term outdoor use. Geds Aaxc Sjpfx Ad Rjui The wood panel can be replaced separately, so if it is damaged, the entire fence does not need to be replaced. 🔧 Specifications Welding: Hand-welded Panel dimensions: 2160 x 2000 mm Weight: approx. 37 kg Frame material: Hot-dip galvanized steel Vertical tube: Ø 40 mm Horizontal tube: Ø 28 mm Wall thickness: 1.5 mm Mesh size: 35 x 150 mm Horizontal wire thickness: 4.0 mm Vertical wire thickness: 3.0 mm U-profile: 40 x 42 x 40 mm Panel material: Douglas fir wood Douglas fir plank: 145 x 17 x 1090 mm ✅ Advantages Robust, hand-welded frame Hot-dip galvanized for rust and weather resistance Strong and high-quality construction Replaceable Douglas fir wood panels Suitable for long-term outdoor use Durable solution in case of damage Application Suitable for securely and attractively fencing off construction sites, areas, and other locations where both screening and durability are important.

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 2465358, load capacity: 200 kg, lifting height: 13,000 mm, platform length: 1,200 mm, platform width: 960 mm, overall weight: 6,700 kg, transport length: 4,400 mm, transport width: 1,500 mm, transport height: 2,080 mm, fuel type: electric, tire size: 0,60 x 0,19 m, color: red, Technical Data Year of manufacture: 2016 Motor: Electric Working height: 15.00 m Platform height: 13.00 m Platform dimensions (L x W): 1.20 m x 0.96 m Overall dimensions (L x W x H): 6.05 m x 1.50 m x 1.97 m Side outreach: 7.60 m Up and over height: 7.00 m Gedeyqz Ayspfx Ad Rsui Jib arm articulation range: +70° / -70° Horizontally swivelling jib arm: +70° / -70° Platform rotation: 140° Slew range: 355° Load capacity: 200 kg / 2 persons Inner turning radius: 1.87 m Outer turning radius: 3.96 m External turning circle: 4.82 m Driving speed: 0.6 - 5.0 km/h Outdoor operation: 45 km/h Max. gradeability: 25% Max. permissible tilt angle: 5% or 3% Battery capacity: 300 Ah / 2x224V Weight: 6,700 kg Fully functional, normal signs of use

Condition: used, functionality: fully functional, Year of construction: 2017, machine/vehicle number: 2465688, load capacity: 200 kg, platform length: 1,200 mm, platform width: 960 mm, overall weight: 6,700 kg, transport length: 6,050 mm, transport width: 1,500 mm, transport height: 1,970 mm, fuel type: electric, tire size: 0,60 x 0,19 m, color: red, Technical Specifications Year of manufacture: 2017 Engine: Electric Working height: 15.00 m Platform height: 13.00 m Platform dimensions (L x W): 1.20 m x 0.96 m Overall dimensions (L x W x H): 6.05 m x 1.50 m x 1.97 m Lateral outreach: 7.60 m Up-and-over height: 7.00 m Basket arm swing range: +70° / -70° Horizontally swiveling basket arm: +70° / -70° Basket rotation: 140° Slew range: 355° Load capacity: 200 kg / 2 persons Inside turning radius: 1.87 m Outside turning radius: 3.96 m External turning radius: 4.82 m Travel speed: 0.6 - 5.0 km/h Outdoor operation wind resistance: 45 km/h Maximum climbing ability: 25% Maximum permissible tilt: 5% or 3% Battery capacity: 300 Ah / 2x224V Guedpfx Adsyqz A Hj Rji Weight: 6,700 kg Fully functional, general signs of use

Condition: used, Year of construction: 2003, Manufacturer : Martin Christ Gefriertrocknungsanlagen GmbH Model: EPSILON 2-6D Year: 2003 Type : Laboratory and pilot freeze-dryer Applications: Dry or liquid drying in vials, bottles, ampoules, flanges, trays, etc. Examples of products: Biological products: bacteria, viruses, tissues, plant extracts / Pharmaceutical products: plasma, serum, antibodies, vaccines / Biochemical tests / Food products: ferments, vitamins General data : Pre-freezing, freeze-drying (sublimation) and final drying Vacuum application, < -10°C 3 + 1 shelves Area per shelf: 23 x 30 cm = ± 0.06 m² Distance between shelves: 68 mm Software: SCADA Software Cleaning flange Sample extraction system Manual stopper for vials Gujdpsygndpsfx Ad Roi Ice condenser : Capacity: 8.0 kg Performance: 6.0 kg / 24 h Temperature: -75°C Dimensions : Width: 800 mm Depth: 840 mm Height: 1640 mm Weight: ~650 kg Energy data : Power supply: 3-phase, 400 V / 50 Hz Power consumption: max. 5.0 kVA Max. ambient temperature: +25°C Refrigerant : Types : R404A, R508, Isceon 89 Heat transfer fluid: Syltherm XLT Technical connections Warm water inlet: ½" hose connection Defrost water drain: ½" hose connection Vacuum exhaust: DN 25 stainless steel pipe Ventilation: DN 6 connection Autres : Documentation and qualifications available Sold with LPC plus computer for data analysis. Spare parts

Condition: used, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 07/1994, next inspection (TÜV): 10/2024, * Grain body * 2x tippers * 1x silo * Drum brakes * BPW axles Gusdoxtibnjpfx Ad Roi * Own power unit * NATO socket ----Internal vehicle number: 11446-----Subject to errors & prior sale WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us easily via WhatsApp WhatsApp German, English -- WhatsApp German, English, Arabic

Condition: used, functionality: fully functional, Vertical insulated stainless steel tank Exterior dimensions: Dia Ø 2850/3000 mm, total height 5500 mm. Gsdpfexp Hihex Ad Rsui Vertical, insulated stainless steel tanks – 2 units. Capacity: 30,000 L 50 mm insulation, completed with aluminium TRP plates. Conical bottom with 3" outlet. Conical top with ventilation. Manhole in lower part of the cylinder. Brand: Gjettermann & Nielsen A/S Quality: AISI 316 (V4A).