Used Pallet Lift Table for sale (40,068)

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi3, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Gbsdpfxjz Ipclo Aansw Some images may contain options that are subject to a surcharge.

Year of construction: 2002, condition: used, functionality: fully functional, Hydraulic scissor lift table with separate hydraulic power unit lifting capacity 3000 kg Platform size 1100 x 3500 Gsdpfx Asymfmusanebw Min. height 450 mm Max. height 2500 mm Handheld controller

Condition: used, machine/vehicle number: 007278, Max. panel width: 800 mm Max. panel length: 2500 mm Max. panel stack height from the ground: 1650 mm Gbedpfxet H Txqo Aansw Lifting capacity: 4500 Kg

Condition: new, weight max. in kg 2000 kg table length 1300 mm stroke height 190-1010 mm table width 800 mm stroke of worktool slide 22 mm/sek. weight 280 kg Furnishing: - For ergonomic work at the optimal working height Gbsdpfx Aoxak Ipeanew - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Stepless lifting and lowering - Stable powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Meets the safety criteria of EN 1570 - High pressure cylinder with double safety function

Year of construction: 2013, condition: good (used), Scissor lift table with powered roller conveyor – used Price (net) ex works: only €1,500, disassembled and loaded! Manufacturer: Schwinghandl Year of manufacture: 2013 Type: Roller conveyor / Scissor lift table Length of roller conveyor: unknown Godofwr Uqjpfx Aanobw Element width approx. 75cm Roller length: approx. 68cm Roller width: approx. 5cm Element height: approx. 15cm Lifting height: currently approx. 78.5cm Motor: SEW Condition: good Available: immediately Location: Zwickau, later warehouse in Frankenberg (Saxony)

Condition: used, Sandt 530 machine available with 80 T or 100 T Punching force: 800 kN Table size: 1600 x 800 mm Punching stroke: 20 – 165 mm, infinitely adjustable Working height: without punching pad approx. 1000 mm Overhauled or Punching force: 1000 kN Table size: 1700 x 1050 mm Godpfx Asx Sdy Eoanjbw Punching stroke: 20 – 165 mm, infinitely adjustable Working height: without punching pad approx. 1000 mm Overhauled

Condition: used, Electric pallet stacker, low-platform lift truck, "Ameise" (ant), drawbar stacker JUNGHEINRICH Type EJE 116 Machine no.: 90292723 Year of manufacture: 2008 Rated load capacity: 1600 kg Lifting height: 200 mm Fork length: 1150 mm Operating voltage: 24 volts Overall length: 1750 mm Overall width: 730 mm Overall height with drawbar: 1330 mm - Battery from 2019, Type 24 V 2 PzS 180 (24 volts / 180 Ah) - Battery automatic charger Jungheinrich 24 volts, 25 amps Gbjdpjyxy Sqofx Aanew - 2767 operating hours recorded. Weight approx. 560 kg In good condition

Condition: used, Lift table with roller conveyor BARTSCHER Gedpfx Aeym Smheanjbw Load capacity 1500 kg Lifting height 1.80 m

Condition: new, Year of construction: 2026, The CORMAK TA3510R scissor lift table trolley with rollers is a mobile device designed for lifting, transporting, and transferring loads between workstations. The platform, equipped with 9 transport rollers, facilitates the movement of components and containers, while the wide height adjustment range allows the working level to be adapted to machines, assembly tables, and other loading and unloading stations. Key Benefits of the TA3510R Scissor Lift Table Trolley with Rollers - Load capacity of up to 350 kg – enables the handling of heavy components, containers, semi-finished products, and other loads used in production and logistics processes. Gjdpfx Aas Aa Nf Denobw - 9 rollers with a diameter of 50 mm – reduce resistance when moving loads across the working surface and facilitate their transfer to adjacent workstations. - Lifting height of up to 1360 mm – allows the working surface height to be adjusted to different material loading and unloading levels. - Working height range from 400 to 1360 mm – enables a single device to be used at workstations of different heights. - Mobile design – allows loads to be transported between successive stages of the production process without the need for a stationary lift table. - Transport, lifting, and load transfer functions – one trolley can perform several operations related to material handling within a facility. Roller Platform for Easier Material Handling The key feature of the TA3510R model is its working surface equipped with 9 rollers, each 50 mm in diameter. Unlike a conventional solid platform, the rollers allow properly supported loads to be moved along the working surface without having to lift them completely when transferring them to the next workstation. This solution is particularly useful when working with workbenches, assembly stations, production lines, and other material transfer surfaces. Once the platform has been adjusted to the appropriate height, the load can be moved from the trolley to the workstation or in the opposite direction. This reduces the number of manual lifting operations and improves material flow between successive stages of the production process. Wide Working Height Adjustment Range The TA3510R scissor lift table trolley operates within a height range of 400 to 1360 mm. This allows the rollers to be positioned at a level suitable for receiving or transferring loads, which is particularly important when servicing workstations of different heights. The adjustable height can also improve operator ergonomics. Instead of repeatedly lifting a heavy component from a low position onto a workstation, the trolley platform can be positioned as close as possible to the required height, allowing the load to be moved along the rollers. During repetitive production and assembly operations, this reduces unnecessary material handling. Mobile Lift Table for Production and Internal Logistics The lift table with rollers combines the functionality of a mobile transport device with an adjustable material transfer station. The 455 × 800 mm working surface allows various components, containers, and assemblies to be handled, provided that the load is properly supported and the maximum permissible load capacity is not exceeded. TA3510R Technical Specifications Load capacity 350 kg Minimum table height 400 mm Maximum table height 1360 mm Working surface dimensions 455 × 800 mm Wheel diameter 120 mm Rollers 9 × Ø50 mm Weight 106 kg

Condition: excellent (used), Year of construction: 2004, total height: 1,060 mm, empty load weight: 4,300 kg, load capacity: 4,000 kg, overall weight: 4,300 kg, total length: 6,000 mm, total width: 3,000 mm, table width: 3,000 mm, table height: 1,063 mm, without hydraulic unit Gbedjqagvzspfx Aanow

Condition: used, Electric pallet truck, low-profile lift truck, "Ameise" (ant), drawbar stacker JUNGHEINRICH Type EJE 116 Serial No.: 98008311, Year of manufacture: 2010 Rated load capacity: 1600 kg Lifting height: 200 mm Fork length: 1150 mm Gjdpfx Aeyr R Dvsanobw Operating voltage: 24 Volt Overall length: 1750 mm Overall width: 730 mm Overall height with drawbar: 1300 mm - Battery from 2013, Type 24V 2 PzS 230 (24 Volt, 230 AH) - Battery automatic charger Jungheinrich 24 Volt, 30 Amp. - 2399 operating hours recorded. Weight approx. 560 kg Good condition

Condition: used, Electric pedestrian stacker, low-lift pallet truck, powered pallet jack, tiller stacker JUNGHEINRICH type EJE 116 Serial no.: 90316421 Year of manufacture: 2008 Rated capacity: 1,600 kg Gedpfx Ajyr R Dpeanebw Lift height: 200 mm Fork length: 1,150 mm Operating voltage: 24 Volt Overall length: 1,750 mm Overall width: 730 mm Overall height with tiller: 1,330 mm - Battery from year 2013, type 24V 2 PzS 250 (24 Volt, 250 Ah) - Automatic battery charger Jungheinrich 24 Volt, 25 Amp. - 3,818 operating hours recorded Weight approx. 560 kg Good condition

Condition: new, Year of construction: 2026, functionality: fully functional, Max. lifting capacity 400 kg Height adjustment 500 - 1150 mm Perforated plate, coated, 2000 x 1015 x 30 mm Price without accessories (support rails, rack and pinion, counter-bearings, etc.) Gedpfoyrdcxex Aanobw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2400x1200x410 mm Weight 1300 kg Total power requirement 0 kw Gbedpfx Aajvz Haujnow

Condition: used, machine/vehicle number: 6352969, Year of construction: 2019, operating hours: 1,300 h, load capacity: 1,600 kg, fuel type: electric, fork length: 1,150 mm, Equipment: CE marking, UVV, full service history, Neatly used electric pallet truck. Includes AMTeK inspection. Transport/trade-in possible. Equipped with on-board charger and PIN code security. Gbodpfxeymyiqs Aansw

Condition: like new (used), functionality: fully functional, machine/vehicle number: TX25L, Year of construction: 2021, load capacity: 2,500 kg, total length: 1,219 mm, total width: 685 mm, Unused hand pallet trucks from the brand Global. Model: TX25L Manufacturer: Global Industries Year of manufacture: 2021 Capacity: ~2500 kg (5500 lb) Width: 68.58 cm (27 inches) Length: 121.92 cm (48 inches) Note, these pallet trucks are wider than standard models. Multiple units in stock. Gbedpfx Ajw A Nqkeanjw

Condition: excellent (used), Panel Beam Saw - With Automatic rear lifting table Numerical Control POWER CONTROL V2.1 (Power TOUCH) Software CADmatic 5 Cross-chains for transporting panel packs in the lifting table Lifting scissor table (mm) 4300 x 1600 Rear pushers (N.) 1 with clamps / grippers 12 Godszxn Ecspfx Aansbw Turning device (rotating unit) at 90° Max. cutting width (mm) 4300 - Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 125 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 450 / Kw 28 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 4 (3 x 2160mm x 650mm + 1 x 2160mm x 800mm) Total power (Kw) OPTIONAL: 200062) Automatic unloading system for cut panels and stacking system AUTOMATECH ROBOTECH with Robot KUKA Mod. KR 470-2 PA

Condition: as good as new (ex-display), Year of construction: 2008, *SALE WITHOUT ROLLER CONVEYOR Gbedeupzwajpfx Aanjw Technical description with the following main data: Load capacity 1000 kg static line load effective stroke 830 mm Overall height 180 mm Total height 1010 mm Platform length 1300 mm Platform width 800 mm Material smooth sheet metal Lifting time approx. 18 sec. for the full effective stroke Lowering time load-dependent Electrical connection 3 x 400 V/ 50 Hz + protective earthing, with 16 A CEE plug and 3 meter cable Motor 0.75 kW, 1,400 rpm. Valve voltage 24 V DC Sealing degree IP 54 general, solenoid valve and switch IP65 Power unit position integrated in the lift table Control box dead man's control incl. 2 m cable Total weight approx. 175 kg* incl. limit switch and thermal fuse up to 2.2 kW motor - Switch for up/down and manual operation is integrated in the control box

Year of construction: 2005, condition: excellent (used), Tabletop dimensions 200x100cm Gbodpfx Aaspq Imnonow Lifting capacity 5t NO HYDRAULIC PUMP price for 1 piece

Condition: new, Year of construction: 2026, Max. lifting capacity 400 kg Worktop: birch multiplex Gbjdpfx Aaeyrc Dusnow Worktop size: 1245 x 740 x 24 mm with recessed grips Height adjustment: 480 - 1070 mm

Condition: used, Electric reach truck, towing truck JUNGHEINRICH type EJC 214 Serial No. 90396426 Year of manufacture 2011 Rated load capacity 1400 kg Load center 600 mm Rated lift height 4300 mm Fork length 1150 mm Overall length 2050 mm Gbedpoxxmfzsfx Aanew Overall width 800 mm Overall height 1900 mm Operating voltage 24 Volt - Triplex mast with 1400 mm free lift - Electric power steering - 1619 operating hours recorded - Battery manufactured in 2012, type 24V 3 PzS 375 (24 Volt/375 Ah) - Automatic charger Jungheinrich 24 Volt, 40 Amps - Surcharge for new UVV inspection = 150 EUR net Weight 1300 kg Good condition

Condition: good (used), machine/vehicle number: 11393, Year of construction: 2012, operating hours: 6,184 h, load capacity: 2,000 kg, lifting height: 1,740 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,300 mm, battery voltage: 24 V, fork length: 1,190 mm, overall weight: 1,780 kg, enginetype: Electric, manufacturer: Jungheinrich Serial Number: 91565092 Gbedpfxoylri Ts Aanow Battery Details: 24V 3PzS 465Ah (aus 2013)

Condition: used, Gruse Steinbock Type: ELD 1-16-1 SO Gruse lifting table ELD 1-16-1 Gbjderhkimopfx Aanew Lift heavy loads with ease Scissor lift table: Lifting table with double scissor mechanism Lifting table ELD Type explanation: Type designation ELD Load capacity 1000 kg Overall height 350 mm Useful lifting height 1600 mm Total height 1950 mm Tabletop 1250 x 800 mm Base frame 1250 x 750 mm Lifting time approx. 21 sec. Power 2.3 kW Weight approx. 600 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: new, The new Holzprofi Maker scissor lift table supports ergonomic processing and handling of workpieces. Its versatile functionality increases long-term productivity and optimizes workflows in your workshop. It features a heavy-duty and sturdy construction. Advantages and Features: - The work table is characterized by high stability and easy mobility. - Robust construction yet mobile thanks to maneuverable casters. - The robust casters and the extremely durable worktop ensure stability, maneuverability, and a comfortable working height. - Versatile, storage aid, stacking trolley, and additional work table in one - MDF perforated panel with 20 mm holes and 80 x 80 mm grid as standard Technical specifications: Table dimensions 1200 x 800 mm Frame dimensions 1000 x 620 mm Height adjustment 430 - 1050 mm Weight 75 kg Max. load 350 kg Table top: 18 mm MDF Gedsx H Uf Uopfx Aanebw Hole 20 mm Hole grid 80 x 80 mm

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: M1-010090-D1, total height: 1,100 mm, construction height: 200 mm, lifting height: 900 mm, load capacity: 1,000 kg, lifting power: 1,000 kg/m, total length: 1,350 mm, total width: 800 mm, input voltage: 400 V, HYMO lifting table, Ex version Gbedpfxszpg H Hs Aanow Ex version II 3D Ex tc ec mc h IIB T-125°C IP 5X nDC Stainless steel top