Used Paper Drill 2 Spindle for sale (50,807)

Condition: used, Year of construction: 2000, number of heads 2 drilling capacity diameter min. 2 mm drilling capacity diameter max. 15 mm serial no. 230 spindle distance 45 - 120 mm bore depth 50 mm Tjdjv T Nrqepfx Adlef Hole distance 3/380 mm

Condition: used, Year of construction: 1986, Technical details: bore capacity in steel (diameter): 18 mm throat: 250 mm bore stroke: 100 mm Tsdpfswiwwfsx Adlsf drill capacity in cast iron: Ø 23 mm metrical thread cutting: ST60: M10 / GG20: M 14 M spindle taper MT: MK 2 spindle speed:: 400 - 630 - 1000 - 1600 - 2500 U/min feed: manuell mm/U Distance spindle/table max.: 75 / 605 mm table clamping surface:: 250 x 250 mm column diameter: Ø 90 mm total power requirement: 0,55 kW weight of the machine ca.: ca. 170 kg dimension machine xH: 0,4 x 0,8 x 1,8 m

Condition: used, Year of construction: 1983, turning speed range 40 - 3.600 U/min bore stroke 105 mm tool adaptor MK throat 250 mm transmission ratio 2x table surface area 660 x 320 mm T-slots 3x T-slot - distance 100 mm Tjdpfxjxgu I Hs Adlof T-slot - width 18 mm total power requirement 2 kVA weight of the machine ca. 720 kg dimensions of the machine ca. 1,2 x 1,0 x 1,8 m Pillar Drilling Machine ACIERA - 22 S 2-1 E - Only 523 operating hours

Condition: ready for operation (used), Year of construction: 2002, For sale used Rilesa Unix drilling machine Todpsu Shx Djfx Adljf - 4 drilling units top - 4 drilling units rear - Right and left

Condition: excellent (used), CATALOG NUMBER 6059 Todegq I I Eopfx Adlsf TECHNICAL DATA - Number of horizontal spindles: 2×20 pcs - Number of vertical spindles: 1×20 pcs - Distance between the outermost spindles: 610 mm - Distance between spindles: 32 mm - Feed cylinder stroke: 60 mm - Max length of workpiece: 3400 mm - Horizontal spindle adjustment: up/down, front/back - Vertical spindle adjustment: right/left - Each drilling unit can operate independently - Right/left drill bits, threaded mounting (screw-in) - 3 pneumatic clamps - Motor power: 4×1.85 kW - Air requirement: 6-8 bar - Dimensions (L/W/H): 4600x1180x2200 mm - Weight: approx. 1500 kg Net price: PLN 12,900 Net price: EUR 3,070 depending on exchange rate, reference 4.2 EUR (Prices may vary depending on exchange rate fluctuations)

Condition: used, Bohrunterlage mit Bohrbandmechanik inklusive eines Bohrbands / Drilling pad with drill band mechanism including a drill band Papierbohrmaschine / Paper Drilling machine Dürselen Corta PB 04 N  Baujahr / Year 2013 - Serial-No. PB04.01.03.1629 4 Bohrköpfe / 4 Drilling Heads Stapelhöhe / Stack high max. 50mm Einlegetiefe hinter den Bohrern / Depth behind the Drilling heads 42mm Lochabstand / Hole distance 31,7 - 293mm Tjdpfx Aoxn S Itsdlsf Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Code: 0233 Brand: REIMALL - ITALY Model: 105 Vertical multiple boring machine with adjustable spindles for panels, armchair elements, chairs, backrests, curved elements, and various Technical data: Table size mm 1000 x 500 Tsdoxrzggepfx Adlsf Vertical table stroke mm 120 N° 2 motors Max opening between table and tools mm 350 N° 6 drilling units Compressed air 6 atm Overall dimensions mm 1500 x 1050 x 1600 h Weight kg 680

Condition: good (used), Year of construction: 1995, Electrical connection rating: 1.75 kW 380/220 V/ 5.2 A Todpfx Asxrp Niedlof Total length with side tables: approx. 2520 mm Depth max. approx. 1170 mm Height max. 1550 mm

Condition: good (used), Year of construction: 2004, TBT ML 200-2-800 deep hole drilling machine TECHNICAL DATA Type: ML 200-2-800 Year of construction: 2004 Control: Simatic OP17 Number of spindles: 2 Spindle distance: 12 mm Drilling slide stroke: 800 mm Drilling range: 1 - 10 mm Process: Single-lip drill Drilling depth: Immersion spindle: 110 mm Seal housing: 430 mm Sealing housing with steady rest: 400 mm Spindle drive: Todpsvcbg Sjfx Adlof Power: 1.7 / 2.9 / 1.3 Voltage: 240 / 350 / 350 V Frequency: 100 - 800 Hz Weight: Approx. 2.6 T We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: ready for operation (used), Year of construction: 2023, This VITAP BLITZ 2.0 multi-spindle drilling machine was manufactured in 2023. It features a drilling head at 3500 rpm, three horizontal and vertical independent spindles, and a glue and dowels inserting unit. The machine is equipped with a 19" LCD TFT monitor, Windows PC system, and Albatros TPA software. Ideal for "JUST IN TIME" or mass production. Contact us for more information about this machine. Application Types Todpjxb E Imsfx Adlsf Boring & Drilling (Wood)

Condition: good (used), functionality: fully functional, 2-spindle paper drilling machine Hang Powerful and robust Register table with adjustable stops 400V/50Hz Tsdpfx Adext Ub Tjljf

Condition: new, Part Number M0297 – For custom furniture manufacturing – Drilling horizontally, vertically, and at an angle in wood-based panels and solid wood – 1500mm fence frame – Complete set of spacers included Todsxbzkwspfx Adlof – Brand new machine TECHNICAL DATA - Number of spindles: 23 - Distance between spindles: 32mm - Total center-to-center distance: 704mm - Maximum tool diameter: 40mm - Maximum drilling depth: 65mm - Max. workpiece size: 740 x 3000 x 200mm - Height of worktable: 860mm - Worktable dimensions: 949 x 350mm - Drilling head tilt: 0-90° - 2 independent pneumatic cylinders - Spindle speed: 2800 rpm - Motor power: 1.5 kW - Operating pressure: 6/8 bar - Dust extraction port diameter: 80mm - Machine package dimensions: 1115 x 950 x 1050mm - Frame package dimensions: 1500 x 120 x 60mm - Net/gross weight: 271kg/301kg Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) (Prices are subject to change with significant exchange rate fluctuations) PRODUCT FEATURES The Maggi Ms704 is a multi-spindle drilling machine designed for rapid production of custom furniture. The MS 704 is a compact machine capable of managing the production process from start to finish, including drilling carcasses, hinge fronts, and any type of system drawers from any brand. The drill allows comprehensive machining of all hole types, in all common technologies: for confirmats, dowels, connectors, mounting holes for runners, shelf pins, hinge cups, and mounting holes for guides and actuators. The worktable width, without removing side stops, is 740mm, so you can drill components with greater-than-standard depths without limitations. The machine is equipped with a patented 1500mm fence frame, allowing processing of workpieces up to 3000mm long, independent of the 32mm system. A new concept for furniture element drilling allows for fast material processing without needing to retool the machine. The fence frame is a fixed part of the device. Unlike conventional drilling machines, the main operational axis is perpendicular to the drilling head, not parallel. The MS 704 is also equipped with adjustable pressure beam height, making it possible to work with materials up to 200mm thick. The clamps are powered by independent circuits and are equipped with valves for safe operation, allowing one clamp to be switched off when machining smaller components. The MS 704 comes as standard with a drill bit magazine and a complete set of spacers for positioning elements along the axis parallel to the spindle head.

Condition: good (used), Year of construction: 1998, 4 spindle paper drilling machine Dürselen PB 04 year 1998 Machine works perfectly complete with instructions, spare parts list, drills and tools - Drill hole diameter 3 - 15 mm - drill distance between the drill heads 31.7 - 293 mm - max. drilling distance over sliding table 420 mm - min. drilling distance above sliding table 1 mm - Insertion depth behind the drills 65 mm - Sliding table width 450 mm Tjdpsuiy Snofx Adlsf - Sliding table size in front of the drills 300 mm - Max. stacking height 50 mm The sliding table can be "programmed" for individual drilling can be "programmed" for individual drilling patterns. Dimensions W 77 cm x D 76 cm x H 135 cm Power connection 380 V Weight 275 kg

Condition: ready for operation (used), Year of construction: 1989, functionality: unexamined, machine/vehicle number: 1441, spindle speed (max.): 3,000 rpm, spindle speed (min.): 200 rpm, total height: 1,500 mm, total width: 560 mm, total length: 800 mm, table width: 240 mm, table length: 250 mm, overall weight: 250 kg, With 2 grooves, including frequency converter for stepless speed use. Todpfx Ajv Iqqdsdlsf

Condition: good (used), Year of construction: 1997, TBT ML 200-2-850 deep hole drilling machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drill carriage stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with bezel: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed - own drive Feed speed: 20 - 500 mm/min Rapid traverse speed NC operation: 12 m/min Feed force: 1.5 kN Motor power: 2.2 Nm at 3000 rpm Clamping tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Stroke max: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and up-to-dateness of the information provided Todpfsvca Rcjx Adlof

Condition: excellent (used), Oscillating window milling machine OMG Pneumatic clamping of material Automatic strip feeding Aggregate angle adjustment 0-90° Pneumatic movement of spindles Tjdpfx Aou Iwcwsdlef Guide bar supports Adjustment of oscillating movement of drills

Condition: excellent (used), Year of construction: 2009, Year 2009 VOORTMAN V600 CNC SINGLE SPINDLE DRILLING MACHINE with 5 station automatic tool changer. 18 metres length, drilling capability 16.3 metres. Tedpsw D Uqfofx Adlof Profile Capacity 35mm -1050mm. Drill capacity 8mm-40mm.

Condition: new, CATALOG NUMBER M0252 PRODUCT FEATURES Main features of the machine: - Single-head drilling machine for drilling at an angle range of 0 - 90° - Head tilt angle adjustable pneumatically - Side stops adjustable with an accuracy of up to 0.1 mm - Securing clamps allow quick panel positioning without adjustment - Spindles adapted for quick couplings - Patented pneumatic material clamps - Work table made of MDF - Fast and precise adjustments - Accurate drilling - Italian-made Tjdpfx Adjdf S Rzsljf Standard machine equipment: - 2 aluminum rulers, 1.5 m long (right and left), each with four stops - 5 quick couplings - Wooden crate for safe transport of the machine ADVANTAGES - Drilling vertically/horizontally/at an angle - Multiple spindles - New machine - CE certificate - Robust - Professional TECHNICAL DATA - Number of spindles: 23 - Distance between the first and last drill bit: 704 mm - Distance between centers of adjacent spindles: 32 mm - Max. size of workpiece: 950 x 3000 mm - Max. workpiece thickness: 60 mm - Max. drilling depth: 65 mm - Number of pneumatic clamps: 2 - Working pressure: 6-7 bar - Air consumption: 10 l/cycle - Motor power: 1.5 kW - Noise level: 76.1 dB - Spindle speed: 2800 rpm - Overall dimensions: 1235/950/1310 mm - Weight: 310 kg Net price: 19,500 PLN Net price: 4,650 EUR Net price calculated at an exchange rate of 4.15 PLN/EUR (price may change if the exchange rate fluctuates significantly)

Condition: used, The COMEC MM05/3L is a multi-spindle oscillating drilling machine equipped with seven spindles, designed for automatic drilling of holes in materials of specific dimensions. The machine features an automatic feeder that streamlines the machining process by automatically feeding and clamping the material. The MM05/3L's technical specifications include: - 7 oscillating spindles, - adjustable oscillation, - pneumatic material clamps, - production capacity of several hundred pieces per hour. Tsdpfexrpciex Adlef The machine features a robust construction, flexible work settings, and CE certification, ensuring safety and compliance with European standards. It is suitable for production applications requiring precise multi-point drilling on a variety of materials, typically found in the furniture and woodworking industries. The automatic material feeder, working in conjunction with the multi-spindle drilling unit, increases the efficiency and repeatability of production processes, minimizing operator involvement and improving work ergonomics.

Condition: excellent (used), Somex max 2 drilling unit Manufacturer: Somex Model: Max 2 Spindle carrier: place sleeve ø 12 mm kW: 0.37 V: 380-420V / 220-240 V A: 1.1 / 1.9 Rpm: 2820 Hz: 50 There are a total of 3 pieces. The above price is per piece. Todpfx Aed Huvysdljf

Year of construction: 2010, condition: good (used), Main Technical Specifications Profiles to be processed • Max. section volume mm 1100 x 1100 • Bar length max. metres 12 Drilling Capacity • Drill heads no. 1 • Spindles per vertical drill head no. 1 Tedpfjig T Axjx Adlef • Drilling diameter max. mm 31.75 • Drilling diameter (with reduced feed) max. mm 40 • Power per head (a.c.) kW 5,5 • Program controlled spindle rotation speed with continuous variation RPM 180 - 1000 Other Specifications • X axis positioning speed (portal) mt/min. 20 • Y axis positioning speed (drill head) mt/min. 4

Condition: excellent (used), CATALOG NUMBER 6608 TECHNICAL DATA - Number of spindles: 21 pcs - Distance between outermost spindles: 640 mm - Spindle pitch: 32 mm - Max drilling depth: 60 mm - Vertical drilling width: 60 mm - Adjustable drilling (up/down and at an angle) - Right/left drill bits, mounted with hex screws - Pneumatic clamps: 2 pcs - Table surface dimensions: 490x1040 mm - Height to table surface: 920 mm - Main motor: 2.2 kW - Operating pressure: 6-8 bar - Dimensions (L/W/H): 2830/1150/1320 mm - Weight: 442 kg - German manufacture - Original DTR documentation - Unpainted - Mobile Net price: 7,900 PLN Tedpoh I N Sqjfx Adljf Net price: 1,880 EUR (based on a rate of 4.2 EUR) (Prices may vary in case of significant fluctuations)

Condition: used, Automatic drilling machine/multi-spindle drilling machine with units for front-mounting sleeves. - 2 horizontal units - 2 vertical units Tsdpfx Ajxrmptjdlsf - 4 front-mounted units (two on each side)

Year of construction: 2007, condition: good (used), ■ V600 Drilling machine (moveable drilling cabinet, executed with 1 horizontal drilling unit and automatic tool changer) ■ Drilling table with power rail length 15 metres, effective length 12 metres ■ Hardware and software (includes VACON 110 machine control) Tsdpfsq Hgg Ujx Adlof ■ Safety devices (safety bumpers) ■ Year of construction 2007

Condition: excellent (used), Year of construction: 1993, Catalogue number 7718 TECHNICAL DATA - Number of spindles: 23 pcs - Head prepared for screw-in drills - Distance between outermost spindles: 704 mm Tjdpfx Adew I R Tijljf - Distance between spindles: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 1200x850 mm - Height to table surface: 930 mm - Feed cylinder stroke: 70 mm - Max drilling diameter: 12 mm - Drilling adjustment vertical/horizontal and at an angle - Drilling unit adjustment pneumatic - Main motor: 2×0.75 kW - Dimensions L/W/H: 1270x1330x1350 mm - Weight: approx. 700 kg ADVANTAGES – Made in Poland – 23 spindles – Head prepared for screw-in drills – Not repainted – DTR technical documentation – Used drilling machine, very good condition Net price: 8900 PLN Net price: 2120 EUR based on exchange rate of 4.2 EUR (Prices may change depending on currency fluctuations)