Used Pass Drill for sale (13,490)

Condition: used, tank capacity: 3,685 l, GENERAL Design: suspended Remarks: 4 mounting lugs made of Fe; 1 vessel with insulation (insulation jacket Fe, painted; external diameter approx. 1,780 mm) Speed: 347 rpm Internal diameter: 1,600 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Overall height: 3,650 mm Heating/cooling: available Power: 1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.2 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Propeller type Support type: Lugs Location: Bremen Technical documentation: Drawing, TÜV papers Cylinder temperature control: Half-pipe coil Nameplate: Podpfxsxqa Tpo Adisgw Vacuum: 1.0 bar Volume: 3,685 liters Double jacket volume: 65.0 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Last application: Chemical industry VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum double jacket / pipe space / bar: 1.0 bar Base temperature control: Half-pipe coil EQUIPMENT Manhole / Dome: on top cover (DN 500) Outlet: Flange DN80 Remark: light adhesions, metallic discolorations inside MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI316) AGITATOR Agitator manufacturer: Stelzer Voltage: 500 Volt Agitator mounting: eccentric in top cover TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5 mm Top wall thickness: 7 mm

Condition: used, Tube End Forming Machine, T-Drill SP-110, Used Machine Manufacturer: T-Drill Model: SP-110 Operation: Uncertain Overall Dimensions: Width: 930 mm Depth: 1520 mm Height: 1460 mm Weight: 600 kg Year of Manufacture: 2016 Air Pressure: 6 bar Electrical Data: 480V; 18.5 kW; 3x80A The T-DRILL SP-110 is a fully automatic tube end spinning machine capable of closing, reducing, and expanding primarily copper and brass tubes — typical applications include HVAC, refrigeration, and mechanical fittings. Technical Data (Summary): Tube diameter range: Ø 8 – 108 mm (≈ 5/16” – 4-1/8” O.D.) – T-Drill Oy Maximum reduction: 70% – T-Drill Oy Materials: primarily copper and brass (as highlighted in the manufacturer’s description) – T-Drill Oy Wall thickness / maximum wall thickness (according to used machine listings): e.g., one listing indicates 0.125" (≈3.2 mm) maximum wall thickness (depends on model/configuration) – Southern Fab Sales Podpfx Aoxu E Duediegw Machine features: automatic clamping, rotation + forming tools (tooling/dies), suitable for forming long or complex tube ends. Capable of closing, flattening, reducing, and expanding tube end geometries; the manufacturer’s brochure contains detailed shapes and examples. Especially suitable for HVAC and industrial refrigeration tubes.

Condition: reconditioned (used), Year of construction: 2002, drill gomad WU 3G 2002 YEAR LIGNUM WU drills Drill WU 3G 3 TOP UNITS Flexible task drills with adjustable spacing of top, side, bottom and swivel drilling units equipped with multi-spindle drilling heads. Designed for drilling all kinds of holes. The modular structure provides many configuration options (working length, number of units, pneumatic clamps, etc.). They enable single- and multi-stage drilling and programming the operation of units depending on the needs. Feeding and receiving of the processed material is done manually. Other drilling functions are performed automatically (material pressure, simultaneous 3-sided drilling, pressure release). Spindle spacing scale according to the order 16 - 44 mm Distance between JC head units 250 - 2500mm Podpfx Adoi Hqhfoiogw Width of JG, JB, JC, JS units 160mm Unit feed cylinder stroke JG - 100mm, JB 100 (120mm) Maximum material width 200mm Maximum material thickness 50mm Maximum drilling diameter 35mm Spindle speed 3000rpm JB units spindle center height above table 6 - 35mm (55mm) Drilling unit engine power 1.1 kW Duration of one-stage and two-stage cycle 4 - 6 sec and 6 - 10 sec Air pressure required 0.4 - 0.6 MPa Compressed air demand 2 m3/h per drilling unit Type of feed drive pneumatic with stepless speed regulation Supply voltage 400V, 50Hz Overall dimensions (L x W x H) 2200 - 4000 x 1500 x 2000mm Weight 2500 - 3000 kg Contact the advertiser Przemyslaw Kretowicz is online lignum 602 Show number

Condition: new, Year of construction: 2025, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: Pgsdeq Nfuzepfx Adiew - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance.

Condition: used, Year of construction: 2003, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, FANUC ROBODRILL T21i DL CNC DRILL-TAP MACHINE MAKE FANUC, MADE IN JAPAN MODEL ROBODRILL T21i DL CONTROL FANUC 16I-MB YEAR 2003 TABLE SIZE 850.0 x 410.0 mm Psdotnh Aljpfx Adiogw TRAVERSES X Y Z 700.0 x 400.0 x 330.0 mm SPINDLE SPEED 10 – 20,000 RPM ATC 21 STATIONS SPINDLE TRAPER ISO 30 RAPID TRAVERSE 54m/min DISTANCE BETWEEN SPINDLE NOSE TO TABLE 150.0 mm – 480.0 mm CUTTING FEEDRATE 1 – 30,000mm/min TOOL CHANGE TIME 1.6 sec MAX TOOL DIA 80.0 mm MAX TOOL LENGTH 200.0 mm MAX TOLL WEIGHT 2 kgs POWER RATING 5.5 Kw PLUS SWARF TRAY COOLANT SYSTEM SET OF TOOLING SET OF MANUALS

Condition: used, Year of construction: 1996, Serial number: 8xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21912 Specifications: 1996 model 1848 hours (I'm a little worried) 564 stroke hours 82 kW Weight: 8160 Machine width: 230 cm Winch Directional instrument Boart HD125 hammer Chassis Diesel heater Videos Ready for delivery Description: We have a 1996 Nemek 503 TXI drilling rig w/ low hours for its age for sale. Errors and defects may occur as the rig is from 1996. But the owner says it works as it should. Pedpfjxz N Ahox Adiegw It has few hours on the engine and hammer in relation to its age. Ready for delivery Own weight: 8160 Engine hours: 1848 Model: 503 TXI borerigg m/ lite timer i forhold til alder

Condition: good (used), two-arm drill, rotary drill, magnetic drill, impact drill, two-handed drill, core drill Psdevq Ic Aopfx Adijgw -Manufacturer: AEG, Two-handed drill type BZ 22 -Nominal power input: 660 W -Connection: 220 volts -Speed: 2x speed 230/350 rpm, clockwise rotation only -Dimensions: 550/370/H110 mm -Weight: 7.6 kg

Condition: good (used), Various WP boring heads and WP drills from Komet Mount: ABS Diameter from 70 to 180 mm New and used Please inquire for the required diameter Pgsdoxz Sdbjpfx Adiow Tool holder optional

Condition: excellent (used), Year of construction: 2015, operating hours: 3,093 h, Make of engine: Deutz 6 cylinder CE mark: yes Technical condition: very good Visual appearance: very good Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Delivery terms: EXW Production country: SE Please contact Christiaan Dekker for more information Atlas Copco Boomer WE3 C30 Year: 2015 Hours: 3093 1000 volt CE certified Gross weight: 54.7 ton Pgjdpfjxykvasx Adijw Diesel power180KW 6 cylinder engine Electric power 28KW/ 320Ampere Hydraulic tilt cabin Prepared for Leica GPS Rotary air drills COP 3038 drills Hydraulic waterbooster Hydraulic Compressor Hydraulic manbasket Tyres 90% good Price Euro. 129.000,-

Condition: used, Year of construction: 2007, turning speeds 2800 U/min drill diameter 2 - 40 mm drilling length 200 mm lip angle 40 - 180 ° total power requirement 0,76 kW weight of the machine ca. 170 kg dimensions of the machine ca. 850 x 850 x 1200 mm Equipment: - Chuck - Coolant device - Machine light - Operating instructions Pgjdpfxjvdxz Ao Adisw

Condition: excellent (used), Year of construction: 1997, DAREX drill sharpening machine 1/3 HP Pedpfjxyvxaex Adiogw Year of manufacture: 1998 3450 rpm 220 V Wheel diameter: 150 mm Left side with drill sharpening attachment (angle 90° - 180°), longitudinal adjustment 25 mm

Condition: used, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 21854 Specifications: 2019 model About 7135 hours (will give a little) Stroke hours: 3432 hours Compressor time: 5292 hours Chassis (see pictures) Pgjdpfx Asxypt Rediew CME grinder Water mist Leica GPS Recently serviced Carousel Vacuum cleaner Rod shifter Automatic drilling Protective cage Winch Air conditioning/ac Radio Remote control Light Ready for delivery   Description: We have a 2019 DX800i drilling rig w/ water mist and Leica GPS for sale. All services and maintenance have been carried out continuously and the rig is in good condition according to the owner. The rig has recently undergone new service. Ready for delivery Engine hours: 7135

Condition: good (used), Year of construction: 2007, Drill, pillar drill, column drill, column drill -Manufacturer: Serrmac -Type: F 28 -Engine: Lafert 1.1 kW -Speed: 250 - 2200 rpm, continuously variable right-left rotation -Table size: 290 x 190 mm, travel 635 mm -Spindle holder: MK3 -Spindle stroke: 120 mm -Projection: 205 mm Psdpfstzf Rzox Adisgw -Column Ø: 100 mm -Dimensions: 720/410/H1860 mm -Weight: 167 kg with pallet

Condition: new, mount diameter: 50 mm, clearance between the columns: 375 mm, spindle mount: MK 4, total height: 2,450 mm, total width: 1,020 mm, total length: 610 mm, table width: 600 mm, table length: 600 mm, overall weight: 820 kg, quill stroke: 230 mm, Column Drill Maximum drilling capacity Ø 50 mm Spindle holder MK 4 Spindle speed min. 54 rpm Spindle speed max. 2.090 rpm Stroke of the drill pinole 230 mm Distance column to drilling center line 375 mm Drilling table size 600 x 600 mm Length 610 mm Depth 1020 mm Height 2450 mm Pgedpfx Adoxu H Eysiow Weight 820 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Drilling capacity 13 mm Spindle mount B 16 6 spindle speeds 410 - 3400 rpm Drilling depth 60 mm - Drill head height adjustable - Motor pole reversible Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel Pgsdpjwnfarefx Adiow

Condition: new, grinding range 3 -28 mm angle adjustable from - to horizontal 0-180 Grad angle adjustable from - to vertikal 0-45 Grad angle adjustable from - to negativ 0-52 Grad clamping range 3 - 28mm mm 0 5200 U/min connected load 230 / 250 Volt / Watt wheel diameter 100 x 50 x 20 mm weight of the machine ca. 45 Kg dimensions 0,5 x 0,4 x 0,4 m This grinder is ideal for regrinding tools such as end mills, drills, TIG welding needles and much more. comes standard with: Lathe tool accessories Drill accessories Pgjdpfxovn U Ads Adiow Accessories for milling 5C spring collet (4-6-8-10-12 mm) Clutch key 38-42 Grinding wheel wrench Allen key M3-M8 screwdriver Diamond grinding disc Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond pen Spring collet: 3/16" - 5/16" - 3/8" - 1/2"

Condition: new, BRAND NEW T-TYPE FLOOR TYPE MILLING MACHINE HEIDENHAIN TNC 640 CNC Control HEIDENHAIN Package (motors, measuring systems, and handwheel) X-axis: 4,000 mm Z-axis: 1,500 mm Y-axis (cross-ram): 1,300 mm V-axis (cross-column): 1,000 mm Rotary table (C-axis): 2,000 x 2,000 mm Max. load capacity up to 15,000 kg Automatic universal swivel head 1° x 1° (optional with fixed quill Ø 210mm) Spindle taper: SK50 DIN 69871/A Pgsdoq I Nkbspfx Adisw Spindle speed: 6,000 rpm (oil-cooled) Maximum spindle motor power: 53 kW ICS - internal coolant supply - 36 bar Rapid traverse X, Y, V, Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm ATC - Tool changer: 60-station (vertical/horizontal change) Double hinged belt chip conveyor (longitudinal) Perimetric enclosure (open top) Only inquiries from Germany will be answered.

Condition: used, Year of construction: 2020, Please contact ATS Norway for more information Please provide reference number upon request: 21856 Specifications: 2020 model 5271 hours (I want to know a little) 1669 stroke hours Chassis (see pictures) New belts Recently serviced Carousel Water mist system CME grinder Leica GPS Vacuum cleaner Drill bit holds on the side Protective cage Automatic drilling Light Air conditioning/ac Ready for delivery   Description: We have an Atlas Copco T35 w/ water mist, cme grinder and gps for sale. Everything works as it should according to the owner and service has just been taken. The rig's belts have also recently been replaced. The rig is well maintained and, according to the owner, is in excellent condition. Pjdpfx Aexypqpjdisgw Ready for delivery Engine hours: 5271

Condition: good (used), Reamer, twist drill, drill -Twist drills: different sizes on request -different manufacturers -Price: Ø 10 - 30 mm 0.50 EUR/mm (drill Ø 20 mm = 10 EUR net) -Price: Ø 31 - 45 mm 1 EUR/mm (drill Ø 35 mm = 35 EUR net) -Price: Ø 46 - 80 mm 1.60 EUR/mm (drill Ø 50 mm = 80 EUR net) -Two-cutter -Diameter: 10-80mm -different lengths -Recordings: MK1 - MK6 Pjdpjv H D N Rofx Adiegw -Type: HSS

Condition: new, mount diameter: 40 mm, clearance between the columns: 350 mm, spindle mount: MK 4, total height: 2,220 mm, total width: 930 mm, total length: 560 mm, table width: 560 mm, table length: 560 mm, overall weight: 465 kg, quill stroke: 180 mm, spindle speed (max.): 1,450 rpm, spindle speed (min.): 50 rpm, Column Drill Maximum drilling capacity Ø 40 mm Spindle holder MK 4 Psdoxu Hp Espfx Adiegw Spindle speed min. 50 rpm Spindle speed max. 1.450 rpm Stroke of the drill pinole 180 mm Distance column to drilling center line 350 mm Drilling table size 560 x 560 mm Length 560 mm Depth 930 mm Height 2220 mm Weight 465 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 21855 Specifications: 2021 model 5631 kg Weight: approximately 20,000 kg Belts replaced in 2024 Winch Water mist L5 gps Services taken in progress It will be delivered with new service Rod shifter Vacuum cleaner Rod magazine Air conditioning/ac Light Radio Ready for delivery Pgsdpfxsxypp Eo Adisw   Description: We have a 2021 Sandvik DX800 drilling rig w/ water mist and L5 gps for sale. Everything works as it should and all services and maintenance have been taken care of by the owner. A new service will be taken upon sale. Ready for delivery

Condition: new, spindle mount: MK 4, total height: 2,220 mm, total width: 930 mm, total length: 560 mm, table width: 560 mm, table length: 560 mm, overall weight: 465 kg, quill stroke: 180 mm, drilling capacity: 40 mm, Equipment: type plate available, Maximum drilling capacity Ø 40 mm Spindle holder MK-4 Spindle speed min. 50 rpm Spindle speed max. 1.450 rpm Stroke of the drill pinole 180 mm Distance column to drilling center line 350 mm Psdpfexu Hnuex Adijgw Drilling table size 560 x 560 mm Length 560 mm Depth 930 mm Height 2220 mm Weight 465 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2020, Please contact ATS Norway for more information Please provide reference number upon request: 21853 Specifications: 2020 model About 5380 hours (will be a little) Straight grinder Chassis (see pictures) Recently serviced Carousel Rod shifter Vacuum cleaner Winch Protective cage Remote control Pendant on base Light Ready for delivery Pjdpfx Ajxypprsdijgw   Description: We have a 2020 Atlas Epiroc T30 drilling rig w/ L5 gps for sale. It has recently been serviced and everything works as it should, according to the owner. Services and maintenance are ongoing. The number of hours will increase slightly as the rig is in daily operation. Ready for delivery Engine hours: 5380

Condition: used, Year of construction: 2020, Please contact ATS Norway for more information Please provide reference number upon request: 21850 Specifications: 2020 model 4908 Hours (I want a little) 1602 Stroke hours (I want a little) Chassis (see pictures) About 14000 kg Winch Remote control Rod shifter Carousel Services performed continuously Vacuum cleaner Light Protective cage Pendant on base Support paws Ready for delivery   Description: We have a 2020 Atlas Epiroc T30 drilling rig for sale. The rig has recently had service and maintenance. Everything works as it should according to the owner. The number of hours will increase slightly as the rig is in weekly operation. Ready for delivery Own weight: 14000 Engine hours: 4908 Pgedpfexydkkox Adiow

Condition: used, Year of construction: 2004, Serial number: EKJ0043xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21885 Specifications: - 2004 (2012) model - Hours: Approx. 600 - Weight: 6200 kg - Chassis from 2004 - The rest is from 2012 - Drilling equipment is not included - 2 engines can be included as parts - Ready for delivery Description: The rig burned down and then everything was replaced in 2012. The chassis is from 2004, but the rest has been replaced. Pjdpfjxy Eyasx Adisgw The job was done by Epiroc. The machine is ready for delivery. Own weight: 6200 Engine hours: 600 Model: 2004 (2012) Welldrill 3050CR Borerigg