Used Parts Washing for sale (15,031)

Condition: excellent (used), With acid-resistant section, with high pressure nozzles, equipped with a conveyor Overall Size: 9,5 x 1,15 x 1,9 m Dcodpot Ity Defx Amgsi Opening size: 530 x 250 mm Chemical tank (heated): 0,5m³ Rinse tank (heated): 0,3 m³ Drying fans: 12db Voltage: 380 V

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. Dedpfx Amsv Sa I Tjgjci While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Condition: excellent (used), BIO-CIRCLE Type: RWR 80L Auto KST Description: RWR 80 L KST Fully automatic PLC parts cleaning system The RWR systems from Bio-Circle are the optimal solution for cleaning internal circuit systems without dismantling. The unit is space-saving, quiet and very easy to operate. Due to the completely closed system, there is no odor nuisance from the cleaner or the dirty water. External dimensions: approx. 1200 x 800 x 1050 mm Power supply: 400 V 50 Hz, 16A CEE 5p 6h plug Drain: 1 1/4" outlet Technical specifications: Type of contamination: Limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, low quantities Component geometry: Whole components (without dismantling) Quality seals: Stainless steel, service package available Maximum filling capacity: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heater: 4.5 kW Flow rate: 25 l/min Temperature (preset): 60 °C Total weight of the cleaning system without tank filling: 180 kg Application area: The RWR 80 L KST fully automatic PLC has been developed for the field of plastic injection molding and can be used wherever cooling channels (circuit systems, lines) need to be cleaned. Application: Fill the RWR 80 L KST fully automatic PLC with Power Cleaner KST 2.0. Once the minimum fill level is reached and the system is switched on, the system begins to heat up. During the heating-up period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the change of flow direction run automatically, after the instructions displayed on the screen have been confirmed. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We would be happy to answer any further questions you may have on the phone. Dcsdezgclmopfx Amgsi

Year of construction: 2009, condition: excellent (used), Cleaning system is fully functional. Working dimensions: diameter 800mm, working height 600mm Tank volume: 90L Dcjdpfxezkkb De Amgji Options: Automatic cleaning or with washing brush Interior lighting Design / Accessories: Direct drive for the washing basket Mist extraction Low water level protection / level control Lid locking Weekly timer Chip/particle filter with bath cover plate 5 ECO rinse (fresh water) for minimal water consumption with machine-side hot water preparation Three-dimensional cold air blow-off Oil skimmer Drainage device / bottom flush with pump in gray cast iron and galvanized pipe system Hose connection and tap valve in aluminum/plastic

Year of construction: 2018, condition: good (used), Parts washing machine, full specifications available in the photos of the listing, model: CBR 60 T. The machine is in very good condition. Price is excluding VAT, invoiced. Dsdpfxey D Afde Amgsci

Year of construction: 2021, condition: used, Karl Roll RUK0200-130-150-04 Automated part washing system (2021) The automatic cleaning system is used exclusively for cleaning and degreasing metal parts using aqueous media. Including a VE-Water supply 3x400V/50Hz-415kW/647A total connected power 2000x1300x1600mm batch size/workpiece carrier size (L x W x H) 8.0 batches/hour max. throughput with a batch weight of 300kg (including workpiece carrier) depending on the program 450 kg (carrier + goods) max. batch weight/The weight must be evenly distributed in the basket Cleaning station volume 7550 liters approx. Station 1 6900 liters approx. Station 2 6900 liters approx. Station 3 7500 liters approx. VE water tank Heating - electric 96 kW Station 1 72 kW Station 2 72 kW Station 3 24 kW VE water tank 72 kW Hot air station 75 °C max. temperature cleaning baths 65°C max. temperature VE water tanks Process Station 1: Cleaning 1 in aqueous solution, hot Dedpfx Amoy Uxvtogjci Filter circuit with pressure monitoring Pressure recirculation device Fluid draining Oil separator Short stroke via trolley Re-dosing of 2 different media, Refilling directly or via pump cascade from station 2. Station 2: Rinse 1 in hot aqueous solution Filter circuit with pressure monitoring Short stroke via trolley Refilling directly or via pump cascade from station 3. Station 3: Rinse 2 in hot aqueous solution Filter circuit with pressure monitoring Short stroke via trolley DI water recirculation system, Refill directly. Station 4 on unloading track: Hot air drying Fans Heating coil with temperature monitoring Air supply via filter Adjustable Bypass exhaust air Condition: Very Good

Year of construction: 2017, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: MAXI 91-2, The machine has been thoroughly inspected by IBS, and the pump has been newly sealed. Current pictures to follow. Easy operation thanks to a fully automatic cleaning process, allowing skilled personnel to focus on other important tasks. The wash tank is filled with a mixture of water and soluble IBS special cleaner (washing solution). Contaminated parts to be cleaned are placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the device is switched on and the solution in the tank is heated. Inside the closed machine, the basket rotates at a constant speed around its own axis. The pump units draw the cleaning solution from the wash tank and distribute it via six stainless steel spray pipes with overlapping flat spray nozzles. The parts to be cleaned are intensely sprayed with the hot solution from all sides during the steady rotation of the motor-driven basket. Dcodpfeudz D Ujx Amgoi Once the cleaning cycle is finished, the device shuts off automatically. Advantages - 2 pumps arranged horizontally - 6 three-dimensionally arranged stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (diameter 170 mm) - Rotating stainless steel wash basket, V-belt drive with a separate motor - Steam extraction - Stainless steel perforated screen with filter basket above the wash tank - Low water level safety device - Individually height-adjustable feet Technical Data Capacity of immersion tank/basket: 190 l Diameter of immersion tank/basket: 910 mm Load capacity: 200 kg (optional 300 kg) Temperature min. - max.: 0-60 °C Working height: 500 mm Dimensions (W x D x H): 1310 x 1160 / 1350 x 1285 / 2000 mm Weight: 150 kg Heating output: 6 kW Spray rate: 2 x 6,600 l/h Material: Stainless steel Electrical connection: 8 kW / 400 V / 50 Hz Pump pressure: 2.5 bar

Year of construction: 2026, condition: as good as new (ex-display), These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Dcsdpfx Aefzblqomgsi

Year of construction: 2000, condition: excellent (used), 1 x Parts Cleaning System Malmkvist Turbex 2000 Year of manufacture: approx. 2000 with heating 3 selectable programs: - Washing + drying - Washing - Drying Wash and dry times are adjustable. In very good condition. Technical data: Max. load weight: 20 kg Dedoy I Nr Espfx Amgsci Drum diameter: 400 mm Drum length: 500 mm Heating capacity: 6 kW for dry air blower as well as washing medium Temperature adjustable 0 - 80 degrees Accessories: 3 x washing baskets with three different hole diameters (1.5/2.5/5 mm) + Rack (homemade) 1 x roller conveyor with loading/unloading chute Operating manual + wiring diagrams The machine can be inspected under power.

Year of construction: 1993, condition: excellent (used), 1 x parts washing machine Armleder W 25 Year of manufacture: 1969 Djdponl Ekrjfx Amgeci Technical data: Drum dimensions: 330 x 350 mm Installation dimensions: l: 0.8 x w: 1 x h: 1.1 m The machine can be viewed at our warehouse under power at any time.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), Parts Cleaning System / Spray Cleaning System Type CM13 2-Tank (Washing + Rinsing) including air knife blow-off Basket Diameter: 1,300 mm (octagonal) Max. load capacity: 1,000 kg Basket is loaded and unloaded by the operator using a transfer cart (detachable/mobile) positioned in front of the machine. Useful height: 800 mm Wash tank: Volume: 430 liters, Spray pressure: 6.0 bar Rinse tank: Volume: 280 liters, Spray pressure: 4.0 bar Total connected load: approx. 52 kW Control: Siemens S7-1200 with KTP700 touch panel Including the following features: + automatic water refill for both tanks + automatic chemical dosing 1-10% (Dosatron) + special spray system (can be optionally activated) for small components (= E-spray system) + side channel blower with height-adjustable air knife system (blow-off drying) + steam extraction including condensate return + weekly timer for electric heating Dcodpfxov Tm Aye Amgji + pre-configured for retrofitting an oil separator + media filtration via bag filter (manufacturer Eaton, Topline) in both circuits (washing and rinsing) + external cladding with stainless steel sheet + complete system fully insulated + tanks separated into two modules; fully insulated (different temperatures possible) + removable filter baskets in the return flow + stainless steel circulation pumps incl. mechanical seal and soft starter The system is exhibited at the Glogar Technology Center and is used exclusively for washing trials.

Year of construction: 2026, condition: new, Parts cleaning system, spray cleaning system, type L90 Automatically operating hot water parts washing machine with automatic basket drive via geared motor, stainless steel washing pump (manufacturer: Lowara), circulating 3-sided spray system (from below, from the side, and from above) with stainless steel nozzles. - Basket diameter: 790 mm - Usable height: 500 mm - Max. loading weight: 150 kg - Spray pressure: 3 bar - Tank volume: 105 liters - Heating: electrically adjustable (RT - 90°C) System dimensions (L x W x H): 1,150 x 1,250 x 1,900 mm Empty weight: approx. 220 kg Wash cycle timer freely adjustable via Omron timer (minutes and hours) Dcjdpfxohgh I Se Amgsi Complete cleaning machine (internal components and external housing) made of stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking Bath cover with fine filter (2,000 microns) Suction filter as pump protection Operating hour counter Steam extraction including condensate return Preparation for later installation of an oil separator The parts washing machine is in new condition and has never been used. OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Condition: as good as new (ex-display), Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Dcsdeuxuv Aopfx Amgji

Year of construction: 2026, condition: new, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Dcodpfxjfl Ufzs Amgji

Condition: new, Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Djdpfx Amjhl H Ubjgeci

Condition: new, Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Dsdeuxuwaopfx Amgeci

Condition: new, Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Dedjndcbyspfx Amgsci

Year of construction: 2002, condition: ready for operation (used), Basket diameter: 790mm, usable height: 500mm, loading height: 930mm, max. basket load: 300kg, liquid volume: 150l, pump capacity: 1.5kW, heating capacity: 6kW, machine dimensions X/Y/Z: approx. 1200mm/1000mm/1200mm, weight: approx. 220kg. Documentation available. On-site inspection is possible. Dcsdpfx Amswg E Aqogji

Year of construction: 2023, operating hours: 1 h, condition: new, machine/vehicle number: MANUWASH3128, INTERSONIK Manuwash is perfect solution for manual parts washing. It is safe economic and user friendly. Manuwash can be manufactured with options and dimensions according to your requirements. Ideal for car repair shops and auto repair services. Dodpfx Amed Tg Nnsgeci Please do not hesitate to contact with us for technical details. Please check the attached brochure for other details.

Year of construction: 2023, condition: new, INTERSONIK BOGIE WASHERS are designed for washing huge parts like train bogie. Operating Principle: Parts are loaded to conveyor with a crane or forklift, once the parts are inside the washing cabin spray wash begins. There are multiple stations inside the cabin generally speaking pre-washing, washing, rinsing or pasivation, drying. Dcedpod I E Raefx Amgsi Washing maching can be designed as continue system or step by step procedure according to your demand. Washing pumps, nozzles and other elements are decided by INTERSONIK Engineers meticulously for perfect results. Ideal for train maintenance. Please check the video and feel free to contact with us for further details.

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, maximum load weight: 500 kg, Cleaning system, type W150 Dodjga Dqlopfx Amgoci Basket diameter 1,500 mm Usable internal height 950 mm Basket load 500 kg Suitable for pre-treatment before painting and final cleaning with cleaning agent Complete stainless steel design including: - Stainless steel pump, frequency-controlled - Integration of conductivity probe into the PLC - Automatic level replenishment - Electric bath heating (indirect) - 2 tank system - Eco-rinsing - 3-dimensional pulse air blow-off - Bag filter system - PLC control, Siemens S7-300, with operating panel - Direct drive for the cleaning basket - Mist extraction - Level control - Chip/particle filter with bath cover plate - Pulse compressed air blow-off including soundproofing hood - Oil separator PPT 100 - Pump-out device/bottom cleaning with drain valve - 2 units of drive/transport system

Year of construction: 2026, condition: as good as new (ex-display), HD Wash Basin - HD Brush Washing Station The wash basin features an adjustable 60 bar HD pump, which enables cleaning to take place in a closed working area. Cleaning is carried out using an aqueous degreaser (10 kg included in the scope of supply) at approximately 45°C. Viewing window including lighting Media filtration via cartridge filter Convenient operation via foot switch includes turntable Dcodpfxod H Umrj Amgei Technical data: Working area: 800 x 600 mm Usable height: 400 mm Load capacity: 50 kg Operating pressure: adjustable up to max. 60 bar Pump capacity: 14 l/min Washing temperature: adjustable up to max. 45°C Tank capacity: 100 l Heating power: 3,000 W Total power: 7.0 kW Voltage: 400 V AC 1 P+N+PE; Frequency: 50 Hz Machine weight: approx. 140 kg Overall dimensions with open lid: 1,100 x 910 x 2,020 mm

Year of construction: 2026, condition: as good as new (ex-display), Spray cleaning system – parts washing system with a folding door 1-tank design (washing), tank volume: 320 liters Basket: W x D 1,100 x 1,100 mm Usable height: 800 mm Maximum load weight: 700 kg Washing pump pressure: 4.3 bar, pump power: 5.5 kW Heater (electric): 20 kW; heatable up to 80°C Djdpfxsd Rkmxj Amgoci Control: Siemens Logo Includes: - Steam extraction and condensate return - Automatic water refill - Automatic chemical dosing (0.8 - 5.5%, adjustable) - Insulation of the entire system - System completely made of stainless steel 1.4301 - Basket frame (removable on one side) - 7-day timer for the electric heater - Electric spray lance, h = 450 mm - Preparation for oil separator (electric and mechanical) available New unit; currently used in our technology center for washing tests.

Condition: as good as new (ex-display), Year of construction: 2024, Bath volume: 28 liters Inner tub dimensions: 500 x 290 x 200 mm Device external dimensions: 530 x 325 x 400 mm Weight: 20 kg Ultrasonic frequency: 38 kHz Ultrasonic power eff./max .: 400/800 watts Heating capacity: 1,200 watts Total power consumption: 1,600 watts Dcedpshma S Rsfx Amgoi Sweep: yes

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, Glogar Ultrasonic 600H Ultrasonic Cleaning Unit Maximum tank capacity: 58 liters Basket dimensions (usable): 400 x 255 x 220h mm Tank internal dimensions: 500 x 330 x 350h mm Unit external dimensions: 670 x 580 x 936h mm Ultrasonic frequency: 25 / 45 kHz (switchable) Effective/maximum ultrasonic power: 900 / 3,600 watts Heating power: 2,800 watts Sweep function: yes Pulse function: yes Degas / Auto-degas: yes Drainage/diameter: 3/4“ Basket load capacity: 25 kg The scope of delivery includes 1 stainless steel basket and 1 noise-reducing lid. Delivery ex works (FCA), AT-4490 St. Florian near Linz The unit is manufactured in Germany! OTHER UNIT DIMENSIONS AND DESIGNS AVAILABLE UPON REQUEST. Dsdpfx Amsfk Tt Iegsci