Used Pass Boat for sale (1,143)

Condition: used, mileage: 67,619 km, power: 110 kW (149.56 HP), first registration: 05/2023, fuel type: diesel, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, total length: 5,330 mm, total width: 2,030 mm, total height: 2,060 mm, Year of construction: 2023, Equipment: ABS, EBS, air conditioning, cruise control, fog lights, power assisted steering, power mirror, = Additional options and accessories = Gsdpfx Aozva Rfeayekb - Autoradio - Climate control - GPS navigation - Heater - Hydraulic power steering - Individual air cooling - Individual lighting - Light alloy wheels - Parking sensor - Reverse camera - Side door - Sun visor = More information = Engine capacity: 1.995 cc Make of engine: Ford Tyre tread remainder on axle 1: 50%

Condition: used, mileage: 93,460 km, power: 75 kW (101.97 HP), first registration: 12/2022, fuel type: diesel, fuel: diesel, color: beige, gearing type: mechanical, emission class: euro6, total length: 5,140 mm, total width: 1,920 mm, total height: 1,890 mm, Year of construction: 2022, Equipment: ABS, EBS, cruise control, electronic stability program (ESP), power assisted steering, power mirror, = Additional options and accessories = - Autoradio - Hydraulic power steering - Sun visor Godpfx Aszva N Ujayokb = More information = Engine capacity: 1.950 cc Make of engine: Mercedes Benz Tyre tread remainder on axle 1: 40%

Condition: used, Level shifter, level shifter, converter, level adjustment Gkjdpjlfihvsfx Aaysb -Manufacturer: pilz, level adjustment type V24/RS485 -Interface: 9 25 pin -Voltage: 220V -Dimensions cardboard: 155/100/H80 mm -Weight: 0.4 kg

Year of construction: 2012, operating hours: 0 h, condition: new, machine/vehicle number: W6378-04A, Uraca PÜV 8/200 safety valve, bypass valve, overflow valve (pneumatic and silicone-free), similar to, but not a Hammelmann, Woma, or Kamat. Permissible operating overpressure: 50-200 bar Recommended flow rate: 10-125 l/min. Dimensions HxWxD: 260x113x113 mm Weight: 10.9 kg with MADER PEU-063-0010-I-P-M Year of manufacture: 2012 (unused) Suitable for use with demineralized water. Electro-pneumatic control: Takes over the switching command and pressure setting of the valve. Gksdjd D Aghspfx Aayob Gap seal: Ensures the exact reproducibility of the actuation pressure. Further technical data can be found in the data sheet. Maintains the operating pressure independently of the nozzle configuration. Suitable for long-term overflow operation. Excellent dynamic behavior with rapid flow changes. Special features: Very high actuation reproducibility, high actuation dynamics, cone can be used on both sides.

Condition: good (used), Powtec granulator sieve through sieve rotor sieve mill Pharmaceutical design, fully polished Capacity: 40-240 kg/h Sieve area: 226 m² Motor power: 0.75 kW See our other advertisements Gjdpfewyf Hcsx Aayskb VMA Wekerom

Condition: good (used), Features: Used roller conveyor folding element Condition: fully functional, with signs of wear Professionally disassembled and packaged Price per unit Technical data: Dimensions of the folding element Manufacturer: Overbeck Overall length: 1,070 mm Overall width: 560 mm Conveyor width: 440 mm Axle spacing: 100 mm Gksdpfogk Nx Hex Aayob Roller diameter: 50 mm Frame height: 110 mm Drive type: gravity Price per unit Custom-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly issues. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully completed projects for companies in a wide range of industries, such as logistics, pharmaceuticals, trade or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or supplementary components such as picking shelves or containers.

Condition: good (used), Features: Used roller conveyor folding element Condition: fully functional, with signs of wear Professionally disassembled and packaged Price per piece Technical data: Dimensions of the folding element Manufacturer: Overbeck Overall length: 1,070 mm Overall width: 560 mm Gkodpfx Aasgk Nxxjyeb Conveyor width: 440 mm Axle spacing: 100 mm Roller diameter: 50 mm Frame height: 110 mm Drive type: Round belt Stock quantity: 2 pieces Price per piece Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on the design or assembly. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, crafts, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or complementary components such as picking shelves or containers.

Condition: excellent (used), Passameter Manufacturer: Zeiss (108150) Measuring range: 75 - 100 mm Complete with 2 center stops and pin spanner Gsdpfx Aaeylkkvsyskb

Condition: used, machine/vehicle number: 6252, Year of construction: 2005, operating hours: 6,252 h, load capacity: 1,200 kg, fuel type: electric, construction height: 1,300 mm, .: 6252 Device details: Year of manufacture: 2005 Load capacity: 1200 kg Lifting height: 0 mm Read operating hours: 6252 h Mast type: None Mast height: 1300 mm Length/Width/Height: 1730 / 996 / 1300 mm Operating weight: 1075 kg Battery from: 2005 More device information: ---- The operating hours are always read hours. We would be happy to offer you suitable transportation. Gedpfx Aotw Agmjayjkb A further 250 - 300 forklifts, attachments and sweepers are available for you immediately. Of course, also for rent! We are happy to buy your OLD one. Do you have any questions? During our business hours from 7:30 a.m. to 4:00 p.m. you can reach us. We look forward to hearing from you! We speak English Interim sale and errors for this offer are expressly reserved. In dealer business, the device is sold in AS-IS condition, not reconditioned. All information without guarantee, errors and changes reserved.

Condition: used, machine/vehicle number: 6264, Year of construction: 2007, operating hours: 1,639 h, fuel type: electric, construction height: 1,940 mm, .: 6264 Device details: Year of manufacture: 2007 Load capacity: 0 kg Lifting height: 0 mm Read operating hours: 1639 h Mast type: None Mast height: 1940 mm Length/Width/Height: 1680 / 1010 / 1940 mm Operating weight: 1218 kg ---- Equipment: * Semi-cab ---- More device information: Battery defective New battery possible at extra charge for approx. €2600---- The operating hours are always read hours. We would be happy to offer you suitable transportation. A further 250 - 300 forklifts, attachments and sweepers are available for you immediately. Of course, also for rent! We are happy to buy your OLD one. Do you have any questions? Gksdpfjtw Agyjx Aayjb During our business hours from 7:30 a.m. to 4:00 p.m. you can reach us. We look forward to hearing from you! We speak English Interim sale and errors for this offer are expressly reserved. In dealer business, the device is sold in AS-IS condition, not reconditioned. All information without guarantee, errors and changes reserved.

Condition: new, Röhm 20641, KFM 130/2, Power Chuck 130 MO KFM 2-Jaw, ZA110 Total diameter: 130 mm PF003850 Number of jaws: 2 Jaw stroke: 5.5 Inner diameter: 46 mm Width: 63 mm Manufacturer's technical specifications: Max. actuating force: 5 kN Max. total clamping force: 11 kN Max. speed: 3950 rpm Replacement price approx. €4500 Financing through our bank is also possible. komplett-konzept.leasingo.de Gksdpfx Aoivdq Rjayob Find more power chucks - new and used - in our shop! International shipping costs upon request!

Condition: new, Year of construction: 2026, Genie AWP40S passenger lift with over 14m working height, new, used Demonstrators available ! Gkedpfx Aaevkbppsysb

Year of construction: 2013, condition: good (used), Crossover / Platform / Staircase, Günzburger – used – Ex-works price: only €1,795 (net), dismantled, packed and loaded! Manufacturer: Günzburger Steigtechnik GmbH Type: unknown Year of manufacture: 2013 Gedpfx Aewxv Eyjayskb Permissible load: 200 kg Platform / crossover height: approx. 1.25 m Platform dimensions: approx. L: 80 cm, W: 80 cm step width Total width: approx. 86 cm Steps: width approx. 80 cm Railing height: approx. 1.12 m Total height (with railing): approx. 2.35 m 2 x 6 steps Railing on both sides Original price: over €3,000 (net) Condition: good Available: immediately Location: Frankenberg warehouse

Condition: new, Year of construction: 2026, Genie AWP-30S (AC) personnel lift with 10m working height, new, used - demonstration units available Gkodsrpzftopfx Aayjb

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: W40608G00113, Year of construction: 2016, operating hours: 1,285 h, load capacity: 7,000 kg, fuel type: electric, empty load weight: 1,283 kg, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 7,000 kg MACHINE DETAILS Total weight: 1,283 kg Fuel type: electric Transmission type: automatic Battery capacity: 375 Ah Battery voltage: 48 V DGUV inspection valid until: 12/2025 Tire condition: 100% Operating hours: 1,285 h EQUIPMENT Tow hitch Matching charger Gkjdpfx Asxyv Tqeayeb

Condition: good (used), RS-Elektronik #57494 / DBZ 151 0493 854 5061 DRV11J BUS-ANPASSUNG Plug-In Card Gjdpfx Aaovx T R Ujyekb We have 12 pcs in stock. Price is for one pc only.

Condition: used, machine/vehicle number: 008379, Squaring: First and Second Pass Gjdpfx Aaozvwp Eeyekb Max Panel Thickness: 35 mm Max feed speed: 30 m/min Distance between dogs: 320 mm

Condition: new, This is a brand new binder, supplied in crate. The SpeedBind range of perfect binders meets the growing demand for professionally bound documents and books where quality presentation, quick turnaround, and ease of operation are essential. This SpeedBind 420 Pro offers the ability to produce A3/A4 Landscape/A4/A5 & A6 perfect bound books and documents. Key Features Colour touchscreen control for fast setup Adjustable spine clamping pressure and time Milling and notching spine preparation Combined spine and side gluing system Single glue tank for EVA adhesives Integrated paper dust extractor Fast warm-up time Output: up to 375–450 cycles per hour Padding mode for pad production Control System Operation is via an intuitive colour touchscreen control panel. All settings — including operation mode, glue temperature, clamp pressure, clamping time, and speed — are managed from the touchscreen. Setup is completed within seconds, ensuring consistent results across varying book sizes. Minimal operator training is required. Spine Preparation Spine preparation is performed using an extra-durable milling and notching disc equipped with: 20 milling teeth Gkodpfxjy Dr Hds Aayob 2 notching blades Before glue application, the book block passes over the disc to break down paper fibres on the spine. This process allows superior glue penetration, improving binding strength and durability. Glue System The SpeedBind features a single glue tank for both spine and side gluing. Designed for modern high-strength EVA glues, it eliminates the need for separate adhesives, simplifying operation and maintenance. A tail structure stabilizes the glue layer on the spine before the book block meets the cover. Excess glue is removed automatically, ensuring precise application and clean, professional finishes. Clamping System The adjustable clamping station allows fine control of: Clamp pressure – prevents over- or under-clamping Clamping time – adjustable for different paper and cover materials This ensures a perfectly squared spine and consistently high-quality binding results. Dust Extraction An integrated paper dust extraction system is included as standard. During milling and notching, paper dust is collected in a cloth bag, reducing internal buildup and maintaining clean, reliable performance. Padding Mode In addition to book binding, the SpeedBind includes a padding mode for producing pads and similar products, increasing production flexibility. Specifications Manufacturer Glendale Model SpeedBind 420 Pro Condition New Stock Number 114909 Mode of operation Manual, automatic & fast Max spine length 420mm Sheet capacity 2-60mm Production speeds 375-450 per hour Control panel 7" Colour Touchscreen Milling & notching 20 milling teeth and 2 notching blades Side Glue Yes Adjustable clamp pressure Yes Adjustable clamp time Yes Warm up time 25 minutes Dust extractor Included Electrical requirements 220-240v 50Hz Weight 285kg Dimensions L1600mm x D590mm x H1100mm

Condition: used, General Overview Gedeydh Agjpfx Aayekb Pasteurising, cooling, chilling, curing, emulsifying, reconstituting, incubating and mixing are all processes essential in the food processing laboratory. The Armfield Multi-Purpose Processing Vessel is capable of carrying out all of these functions as a self-contained,mobile unit. Its mobility allows it to be positioned in the laboratory adjacent to other equipment that it may be acting as a service to, and also makes it easily stowable. The hygienically designed jacketed vessel has a working capacity of between 10 and 15 litres which allows experimentation and demonstrations without the need for large quantities of raw materials. An electrical heating element positioned at the base of the jacket heats water in the jacket which in turn heats the contents of the vessel. This method gives a gentle transfer of heat to ingredients that are often heat sensitive and local 'hot spots' are avoided due to the convective distribution of the heat. Cooling is accomplished by simply metering water from a domestic supply through the jacket. Chilling involves the circulation of chilled water in a closed circuit through an ice bank circulator incorporated in the base of the unit. An emulsifier having a variable speed drive and several options of emulsor head can be lowered into the process fluid. Hands-on experience can be gained by students and full instrumentation allows a complete record of the process to be compiled. An automatic valve changeover system enables uncomplicated operation requiring the student/trainee to simply select the particular process required rather than have to operate an array of manual valves. Description Where necessary, refer to the drawings in Equipment Diagrams section 8. 9.1 Overview The stainless steel jacketed vessel (1) has a polished, hygienic finish and a working capacity of between 10 and 15 litres. Its contents are heated indirectly by cartridge heater (16) in the base of the jacket. The heater is protected from over-temperature by a thermostat (17) adjacent to it. An emulsifier (2) can be lowered into or raised out of the vessel using the locking handle (5). The on/off and variable speed control (14) of this unit are situated on the motor housing and not on the control console. A green running light (7) indicates when the emulsor motor is switched on. The emulsor head (3) can easily be interchanged with any of the alternatives supplied by simply removing the finger-nuts securing the head to the drive shaft. A lid (6) is provided to prevent any airborne contamination during long periods of heat treatment. Chilled water is circulated from an ice bank unit (12) situated beneath the processing vessel. After a period of time required to build up an ice bank, this will provide chilled water to the vessel jacket, cooling the contents to a temperature suitable for storage/curing. The ice bank is usually used after an initial rapid cooling by circulating cold water from a domestic supply. 3-way valves (10) and (11) are used to automatically select either open circuit domestic supply cooling or closed circuit chilled water cooling. In both cases the water passes through a flowmeter (13) where the flow rate can be adjusted manually by control valve (14). From the flowmeter, the water enters the base of the vessel jacket after passing through an in-line non-return valve (15). The water leaves the jacket diagonally opposite the inlet, at the top of the vessel. A pressure relief valve is incorpor...

Condition: used, Year of construction: 2006, Masterfill Filling Machine S 500 The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products. Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards. The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill S 500 integrates seamlessly into existing production lines. Key Features - High-precision volumetric filling system - Suitable for liquid and semi-viscous products - Hygienic stainless-steel construction - Easy-to-use control interface - Adjustable filling speed and volume - Low maintenance and easy cleaning - Compact and space-efficient design Applications - Milk and dairy products - Yogurt and desserts - Cream and sauces - Beverage and liquid food products Materfill S500 6 head fill while rise filler M2-AF Serial number 4716 YOM 2006 Filling capacity 2ml to 2000 ml The filler is a 6 head automatic filler, with the capacity to store 50 separate preset menus, Brief FDS • Controlled by Siemens S7 PLC via Mitsubishi Beijer HMI • Jars feed in vis constant stainless steel slat band • Jars indexed via program-controlled infeed and outfeed pneumatic gates. • Jars filled via positive pressure within 50 ltr holding tank (this could be changed easily to a constant positive pressure into manifold via modulating pump) • Volume controlled via Nixon BNO turbine flow meters communications with siemens high speed counter. • Liquid feeds into jar with rise during fill or above jar for fill time • Full SIP, CIP, and flush capability programs available Dico CapperSerial number 3/379Brief FDS  Capper with rotating starwheel Gkodpfx Ajywuczsayob  Will cap Square of round Jar/ Bottles (change parts included)  Jar enters, signals PEC starwheel turns 90⁰ under capping head  Capping lowers on cam, retracts on cam  Jar/ bottle clamp activated of adjustable cam onto 5/2 valve  Starwheel turns 90⁰ onto exit conveyor  Current capping head removable, for 40mm cap (no alternative head)  All systems work on cams and relays, no PLC  Motor runs on DOL for capping (clutch adjusted and variable speed gearbox)  Cam motor uses inverter. Guards with interlocked access doorway Required services.  3 Phase 32-amp electrical supply  7 Bar air pressure Main control panel Cap sorter and feederRNASRC-N 400-2LSerial no 00801Brief FDS  40mm cap sorter and feeder  Vibrating bowl agitates caps upwards  Air jets and cut outs sort caps placing in correct orientation  Cap chute allows smooth passage to dispensing head with some adjustment  Cap dispenser works on bottle/jar passing under and catching cap, this allows the retaining jaws to open and release cap  Side or over independent speed controlled wheel assists in cap leveling Required services.  240V electrical supply  3 Bar air pressure Filling volume: 25-2000 ml Controls: SIEMENS S7 via Mitsubishi H...

Condition: used, Year of construction: 2016, For sale Duplo 746 Cutter creaser. Year 2016 Top Spec with extra optional Modules includes: CPM-04 RTM-04 Gkjdpfx Aaezx Htfsyob Current product, fully supported by Duplo offering support, Supply of spare parts and supported! 1 owner from new, Previous client paid 90K new!! Very nice condition. These new cost £90k Plus, Machine is in stock in my warehouse. Inspecting and testing welcome in Tadley Reading. The Duplo DC-746 Cutter Creaser is Duplo’s most powerful and versatile slitter, cutter, and creaser, designed to handle high-volume production with precision and speed. Ideal for applications like business cards, brochures, and intricate direct mail pieces, it streamlines complex finishing tasks in a single pass. With advanced features, including a high-capacity feeder, automated setup for up to 30 jobs, and lightning-fast speeds of up to 50 sheets per minute, the DC-746 ensures maximum productivity. Its enhanced feeding mechanism supports a wide range of paper types, delivering unparalleled accuracy even for digital stocks prone to curl or static. The DC-746 is expandable with optional modules for rotary perforating and cross-perforating, making it a perfect choice for PSPs looking to increase efficiency, reduce manual intervention, and produce premium-quality finished products. Specification and Features Machine Dimensions W 3040mm x D 870mm x H 1730mm (with PC) Automated Set-up From barcode In-feed Paper Size Min: 210mm x 210mm Max: 370mm x 670mm Creases Max. 20 per sheet Cuts Max. 30 cuts per sheet Slits Six (standard) (8 with options fitted) Ideal for Business cards Folded flyers Tickets Perforated vouvhers

Condition: excellent (used), Year of construction: 2018, Ref:11138 . 2018 Horizon CRF-362 Creaser-Folder High speed automatic creasing / folding machine designed for both digital and offset printers to crease & fold digitally printed, heavyweight or cross-grained stock in one pass. Avoiding cracking of digitally-printed stocks. Quick and easy set-up and operation is performed through the high resolution colour touch screen. Suitable for creasing covers, restaurant menus, shop cards, invitation cards and laminated sheets. Preparing Perfect Bound Book Covers – sharp, high quality creasing prepares the spine, hinge and flap by selecting up or down creasing. High Quality Folding – two fold knives for high quality folding, even on heavy stocks. 6 different folding patterns can be set up simply by using the icon based touch screen. Specification: Maximum sheet size 364 × 865 mm Gksdszu Divepfx Aayjb Minimum sheet size 105 × 180 mm Feeding system Air suction feed belt Feeder pile height 150 mm Normal paper – crease & fold 80–350 gsm Normal paper – crease only 80–400 gsm Coated paper – crease & fold 105–350 gsm Coated paper – crease only 105–400 gsm Laminated stock – crease & fold 0.2–0.4 mm Laminated stock – crease only 0.2–0.5 mm Maximum crease lines 10 per sheet Creasing direction Positive / negative (up or down) Folding system 2 knife-fold units Speed: Up to 4,500 sheets/hour

Condition: good (used), MMM Group Vakulab HL Medical Autoclave This listing is for the MMM Group Vakulab HL Medical Autoclave. The unit is in full working condition and is ready for immediate use. Overview The Vakulab HL autoclave from MM Group Medical is a high-performance, GMP-compliant sterilizer designed for the safe, reliable, and validated sterilization of laboratory instruments, equipment, and materials. Specifically engineered for use in pharmaceutical manufacturing, biotechnology facilities, and research laboratories, the Vakulab HL combines advanced vacuum-assisted steam sterilization with robust stainless steel construction to ensure consistent results in even the most demanding applications. Key Features inc Advanced Steam Sterilization, Pre- and Post-Vacuum Cycles: Ensures efficient steam penetration and rapid drying, Optimized Steam Distribution: Uniform sterilization across all load types Programmable Cycles: Fully adjustable parameters for different sterilization needs. GMP & Cleanroom Ready, Double-Door Pass-Through Design (optional): For installation between clean and non-clean areas, Stainless Steel Chamber & Piping: High-grade AISI 316L for corrosion resistance and hygienic operation, Integrated Monitoring: Real-time cycle control with full batch documentation capability. Operational Safety & Control User-Friendly HMI: Touchscreen interface for programming and monitoring, Automatic Door Operation: With safety interlocks to prevent accidental opening under pressure, Built-In Diagnostics: Self-check functions for preventive maintenance. Technical Specifications. The Vakulab HL is a vacuum-assisted steam sterilizer available in multiple chamber volumes, typically ranging from 300 to 1,000 liters. The sterilization process operates at temperatures between 121 °C and 134 °C, controlled via a PLC-based system with an intuitive touchscreen human-machine interface (HMI). steam, water, compressed air, and electricity. It is designed to meet EN 285, PED, ISO 9001, and GMP compliance requirements, and can be validated to ISO 17665 sterilization standards. Applications - Pharmaceutical Manufacturing: Sterilization of equipment, components, and containers, Biotechnology: Sterilization of fermentation vessels, culture media, and instruments, Research Laboratories: Sterilization of glassware, tools, and lab consumables, Hospitals & Clinical Settings: Safe sterilization of surgical instruments and textiles, System Components, High-grade stainless steel chamber with polished finish, Vacuum pump system for pre- and post-cycle air removal, Steam generation and distribution system, Control panel with PLC and HMI touchscreen, Integrated temperature and pressure sensors for validation. Quality & Compliance, Manufactured in accordance with GMP guidelines, Complies with EN 285 and ISO 17665 sterilization standards, Full FAT/SAT/IQ/OQ/PQ support for validation in regulated environments, Designed for integration into cleanroom and production facilities, Benefits - Consistent, Validated Sterilization for a wide range of load types. Gedpeyifqvjfx Aayekb

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. Gkodszd Uv Eepfx Aayob 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Sliding guard for operator protection CE safety equipment

Condition: excellent (used), Year of construction: 2020, HP R2000 Very good status, in production. Year: 2020 Mileage: 45.000m² only Options: edge holders View video for extensive presentation For further technical information please refer to attached brochure The HP Latex R2000 is a high-productivity hybrid large-format printer designed for both rigid and flexible media. It uses HP Latex water-based inks, including white ink, to produce durable, high-quality prints for signage, displays, packaging prototypes, vehicle graphics, and interior décor applications. With the ability to print directly onto rigid boards as well as roll-fed materials, the R2000 combines versatility, vibrant color output, and environmental benefits in a single production system. Specification Value Print technology HP Latex water-based inks Maximum print width 2.49 m (98 in) Printer type Hybrid: rigid flatbed + roll-to-roll Maximum print resolution 1200 × 1200 dpi Ink colors 9 channels: C, M, Y, K, Light C, Light M, Optimizer, Overcoat, White Printheads 8 printheads Ink capacity 5 L (colors/optimizer/overcoat), 3 L (white) Maximum rigid media thickness 50.8 mm (2 in) Maximum roll weight 100 kg Maximum roll diameter 250 mm Connectivity Gigabit Ethernet Printer dimensions 5.10 × 2.04 × 1.75 m Dimensions with tables 5.10 × 3.64 × 1.75 m Weight 1,600 kg Operating temperature 15–30 °C Operating humidity 20–70% RH Power consumption 8–11 kW during printing Warranty (original) 180-day limited hardware warranty Print Speeds Mode Speed Outdoor (3-pass, 70%) Up to 86 m²/hr Indoor Production (6-pass, 110%) Up to 43 m²/hr Indoor High Quality (12-pass, 120%) Up to 22 m²/hr White Spot Up to 36 m²/hr White Overflood/Underflood Up to 16 m²/hr Day & Night (3 layers) Up to 5.2 m²/hr Supported Materials Rigid substrates Foam board PVC foam Corrugated plastic Acrylic Polycarbonate Polystyrene Corrugated cardboard Honeycomb board Aluminum composite panels Wood Glass Ceramic Flexible substrates Vinyl banners Self-adhesive vinyl Coated papers Polypropylene Polyester Gedpjzdtuaofx Aayokb Canvas Textile (non-porous) Leather Typical Applications Retail signage Backlit displays Vehicle graphics and wraps Wall coverings Window decoration Packaging prototypes Corrugated displays Textile graphics and soft signage