Used Pharmaceutical for sale (1,574)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 110362L0 / 110363L0, PKM Packaging GmbH / KOCH Pac-Systeme GmbH – Fully Automatic Pharmaceutical Packaging Line For sale is a high-quality, fully automatic packaging line from PKM Packaging GmbH / KOCH Pac-Systeme GmbH (year of manufacture 2012) for pharmaceutical, medical device, diagnostic, healthcare, and cosmetic products. The line consists of two interconnected machine modules and handles the complete secondary packaging process – from the automatic erecting of folding cartons, product insertion and grouping, to closing, labeling, marking, check weighing, and rejecting defective packages. Equipment: Automatic carton erector Collation packer Carton closer Mettler Toledo Garvens XS3 checkweigher (7–700 g / 0.1 g) BLUHM label printing and dispensing system Wolke m600 inkjet marking system Camera and inspection systems Modern touch panel operation PLC control with recipe management, user management, and fault diagnosis Servo drive technology with EtherCAT Complete protective enclosure with safety monitoring Dkedjzmp Tqepfx Anzor Technical data Manufacturer: PKM Packaging GmbH / KOCH Pac-Systeme GmbH Year of manufacture: 2012 Machine numbers: 110362L0 / 110363L0 Operating voltage: 400 V AC Frequency: 50 Hz Connected load: 6 kW + 3 kW Compressed air: 6 bar Enclosure protection class: IP44 Last used packaging formats The system was last used for the folding carton sizes shown in the appendix. The attached die drawings show the last used carton blanks and formats. Conversion to other folding carton formats is possible, depending on the packaging size and product design. Original investment value Garvens checkweigher (Mettler Toledo) – €27,695.00 KOCH carton packaging system VM0059 – €794,497.34 PKM carton packaging system VM0059 – €266,061.66 Other components and integration Total investment of the packaging line: approx. €1,351,161.00 Scope of delivery complete packaging line Carton erector Collation packer Carton closer Conveyor and roller conveyors Checkweigher Labeling and marking systems Camera and inspection technology Control cabinets technical documentation including electrical diagrams, pneumatic diagrams, drawings and parts lists The system is in very good condition and is currently installed in a pharmaceutical plant. Inspections are possible by appointment. We will gladly send functional videos, technical documents, information on disassembly, packaging, and worldwide shipping upon request.

Year of construction: 2021, condition: new, functionality: fully functional, machine/vehicle number: sn: 1100056463, This is a miniature Büchi B-290 spray dryer (Mini Spray Dryer), a high-quality piece of equipment suitable for various laboratory processes. It is a reliable and efficient tool for your laboratory experiments. Dkedszgw Tlepfx Anzsr This device is designed to provide consistent and accurate results with each use. Thanks to its excellent features, this spray dryer is ideal for the medical sector, laboratories, healthcare equipment and devices, the dental field, and industrial applications. It is a BÜCHI brand, model B-290 Mini Spray Dryer, serial number 100056463, year 2021; this equipment is NEW. Take advantage of this opportunity to acquire this exceptional tool and benefit from its practicality and performance.

Condition: used, Year of construction: 1990, machine/vehicle number: 40562, Falzmaschine - Folding Machine Stahl T 36/4-FBaujahr / Year 1990 - Serial-No. 40562/90-163585 Flachstapelanleger / Flat Pile Feeder Dkedpfxer Hfc Rj Anzsr Falztyp / Folding Type 4 Taschen Format / Size: min. 80 x 100mm - max. 360 x 650mm Papiergrammatur / Paper weight: 40 – 250g/m² Stapelhöhe / Pile height max. 580mm Geschwindigkeit / Speed min. 10 m/min. - max. 160m/min. Durchmesser Falzwalzen / Diameter of folding rollers 32mm Auslage Schuppenauslage / Delivery Stream Delivery Kompressor / Compressor include - Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, This listing is for a SWECO PH06 Pharmaceutical Separator with matching SWECO Adjust-A-Vibe Control SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFFF049 Listing name: SWECO PH06Y2 Pharmaceutical Separator Dsdpfx Anoxzia Hszokr

Condition: excellent (used), Packo PHP 2 Pharmaceutical Process Pump The Packo EHEDG and 3A-certified PHP2 series pharmaceutical process pumps are used for the most demanding sterile applications in the pharmaceutical, biotechnology, and semiconductor industries. These perfectly cleanable pumps feature pump housings made of thick, cold-rolled 316L stainless steel, which are 100% non-porous and extremely smooth. The pumps feature fully machined, open impellers made of 1.4435 material. Thanks to their gap-free design and final electropolishing, the PHP2 series pumps are perfectly cleanable, making them a reliable component in your production process. Areas of Application These perfectly cleanable process pumps are the ideal solution for clean water circuits, cleaning applications, etc. Typical fluids include pure water, WFI, CIP, syrups, etc. Your Benefits High pump efficiency leads to lower energy consumption Low NPSH values: reduced risk of cavitation Electropolished: perfectly cleanable Simple design and maintenance: less downtime Standard components Fully certified (roughness value, FDA, USP, 3.1 for wetted parts, certificate of conformity, etc.) Suitable for SIP Robust construction according to ASME BPE guidelines Wetting parts < 0.4 µm Manufacturer: Packo Type: PHP 2/40-1857752 Flow: 14 m³/h Height: 59 m Weight: 91 kg Dedpfx Asw Hc Hmjnzskr Find more items - new and used - in our shop! International shipping costs on request!

Condition: like new (used), 4 x stainless steel pressure tanks, insulated, temperature-controlled, with agitator connection Technical data / dimensions Available quantity: 4 Volume: approx. 4325 liters Tank type: Pressure tank Condition: used Suitable for food: yes Design: upright Diameter inside: approx. 1,500 mm External diameter: approx. 1,700 mm Cylindrical height: approx. 2,000 mm Total height: approx. 3,684 mm Weight: approx. 1,400 kg Specific weight of the medium: 1.0 to/m³ Operating pressure: overpressure/underpressure Operating pressure: -1/+6 bar Test pressure: 7.5 bar Wall thickness bottom: approx. 8 mm Wall thickness top: approx. 12 mm Wall thickness jacket / cylinder: approx. 6 mm Dedpfstv Rm Sex Anzekr Ground clearance: approx. 700 mm Operating temperature: 150 degrees Celsius Material / composition Material inner jacket: V4A (1.4435) Material double jacket: V2A (1.4301) Feet material: Stainless steel Outer surface: Mirror polished Ra

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: BH6721-BH1001, tank capacity: 1,000 l, Equipment: documentation/manual, BRINOX 1,000 L Pre-Filling Tank – 1.4435 – Double Jacketed – PED Module G – TÜV SÜD – FAT – 2020 – As New Dedpfxsykpqro Anzskr Manufacturer: BRINOX d.o.o. Type: SVMBBl-1000 Tag No.: BH6721-BH1001 Serial No.: 1003453 Year of Manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product type: Pre-filling tank / process vessel Nominal volume: 1,000 liters Total volume: 1,400 liters Empty weight: 762 kg Product-contact material: 1.4435 (AISI 316L pharmaceutical grade) CE Marking: CE 0036 Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 1 Design according to AD 2000 code Pressure vessel in accordance with PED 2014/68/EU Category IV Module G – Individual inspection Notified Body: TÜV SÜD Industrie Service GmbH (ID No. 0036) TÜV acceptance including final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel underwent full FAT testing and approval at the manufacturer’s site. Tests carried out include: • Pressure test in accordance with PED • Visual inspection of all weld seams • Non-destructive testing (RT, PT as per test plan) • Dimensional and drawing check (as-built) • Internal roughness measurement (Ra ≤ 0.8 µm) • Calibration test of pressure gauges • Verification of markings • Complete documentation review FAT protocols fully available. DESIGN FEATURES • Cylindrical, horizontal tank • Double jacket for heating/cooling • Internally electropolished and passivated • High-gloss product contact surface • Pharmaceutical-grade weld seams • Manhole DN 500 • CIP connections • Safety valve • Pressure gauge • Bottom diaphragm valve • Agitator port (DN 200) • Multiple spare ports • Heavy-duty trunnion/pivot bearing • Transport and lifting devices DOCUMENTATION – fully complete and well structured Comprehensive, project-specific quality and manufacturing documentation available, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with acceptance report (Module G) • TÜV design test and certification • 3.1 material certificates • Welder lists and welding procedure qualifications (WPQR/WPS) • Non-destructive testing reports (RT, PT, etc.) • Analysis certificates for welding consumables and gases • Company qualification certificate • Roughness protocol • Surface treatment report • Dimensional accuracy report • Internal pressure test report • Calibration certificates for pressure gauges • Reports and EU conformity of installed components • Parts list assembly • Component drawings • Operating and maintenance manuals Complete digital documentation portfolio available. CONDITION • Never used in production • Stock item • Internal surface absolutely as new • No corrosion • No signs of use • As-new industrial condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production plants • Biotechnological applications SPECIAL FEATURE High-quality BRINOX pharma-manufacturing with complete PED Module G individual acceptance by TÜV SÜD, CE 0036 marking, and full FAT test documentation. Not a standard tank, but a quality project vessel with comprehensive GMP-compliant documentation. Immediately available.

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: BH6723-BH1001, tank capacity: 1,000 l, Equipment: documentation/manual, BRINOX 1,000 L Pre-Fill Tank – 1.4435 – Double Jacket – PED Cat. IV Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMMBI-1000 Dkedpfsykqmzex Anzor Tag No.: BH6723-BH1001 Serial No.: 1003454 Year of Manufacture: 2020 CE Marking: CE 0036 Condition: As new / unused TECHNICAL DATA Product type: Pre-fill / process vessel Nominal volume: 1,000 L Total volume: 1,400 L Net weight: approx. 610–762 kg Product contact material: 1.4435 (AISI 316L) Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Permissible temperature TS: -10 / +150 °C Fluid group: 1 Design according to AD 2000 Pressure vessel in accordance with PED 2014/68/EU Category IV Module G – Individual inspection Notified body: TÜV SÜD Identification number: 0036 TÜV CERTIFICATION EU Declaration of Conformity (Module G) Certificate no.: Z-EU-SI-LJU-20-05-2702107-19125214 Inspection report no.: P-EU-SI-LJU-20-05-2702107-19125214 Final inspection in accordance with PED Annex I No. 3.2 carried out Pressure test in accordance with Annex I No. 3.2.2 carried out Acceptance without deviations Permissible load cycle count: 10,000 cycles (1.3 bar) Acceptance date: 20.05.2020 FAT – Factory Acceptance Test Complete works FAT carried out: • Pressure test • Visual inspection of weld seams • NDT testing (RT/PT) • Dimensional inspection • Surface roughness measurement (≤ 0.8 µm) • Calibration test • Documentation review FAT fully documented. DESIGN • Cylindrical, horizontal pressure vessel • Double jacket for heating/cooling • Internally electropolished • Pharmaceutical-grade weld finish • Manhole DN 500 • CIP connection • Safety valve • Pressure gauge • Multiple process and measuring nozzles • For pressurised and vacuum operation CONDITION • Never used in production • Factory tested • TÜV Module G certified • As-new industrial condition • No signs of use • Immediately available DOCUMENTATION Complete structured documentation available, including: • EU Declaration of Conformity • TÜV certificate with inspection report • TÜV design assessment • FAT protocols • Material certificates EN 10204 3.1 • WPS/WPQR and welders’ lists • NDT reports • Surface roughness protocols • Internal pressure test • Measurement reports • Calibration certificates • Parts list and drawings • Operating and maintenance manuals Digital documentation folder available. • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP installations • Biotechnology High-quality BRINOX pharmaceutical specification with PED Cat. IV Module G individual inspection by TÜV SÜD (CE 0036) and complete FAT documentation. Not a standard tank – tested project quality. Immediately available.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 30,000 l, Equipment: documentation/manual, BRINOX 30,000 L WWAS / Solution Tank – 316L – PED – FAT – Complete GMP Documentation – incl. Saddle Supports – 2020 – Like New Manufacturer: BRINOX d.o.o. Tag No.: LV6456-BH1001 Serial No.: 1003464 Year of Manufacture: 2020 Condition: Like new / unused Location: Europe LV6456-BH1001 Package 66 TECHNICAL DATA Product type: WWAS / solution tank / pharmaceutical process vessel Working volume: 30,000 liters Total volume: 33,213 liters Product contact material: Stainless steel 1.4404 (AISI 316L) Surface finish: Chemically pickled, passivated and cleaned Surface roughness: Ra < 1.6 µm Standards and guidelines: • PED 2014/68/EU compliant • CE marking available • GMP-compliant pharmaceutical design Djdpeykngfofx Anzskr Pressure data: Min.: –0.14 bar(g) Max.: +0.5 bar(g) Test pressure: 0.72 bar(g) Temperature range: –20°C to +50°C Hydrostatic pressure test performed. FAT – Factory Acceptance Test Fully documented FAT carried out including: • Dimensional, visual, and identification inspection • Weld seam testing and NDT • Pressure test according to PED • Testing of all connections • Documentation and quality inspection FAT successfully completed. FAT report available. DESIGN / CONSTRUCTION • Horizontal pharmaceutical process vessel • Stainless steel 316L, pharmaceutical grade • Interior surface pickled and passivated • Hygienic, GMP-compliant construction Connections include: • Manway DN500 • Inlet DN100 • Outlet DN50 • Measuring, safety, and process connections Mechanical configuration: • Original BRINOX stainless steel saddle supports included • Heavy-duty design • Lifting points for crane handling present CONDITION • Absolutely as new • Never installed or used in production • Never filled with product • No corrosion or signs of use • Original industrial packaging available • Immediately available Saddle supports are also as new and included in delivery. DOCUMENTATION – fully available (GMP-compliant) Extensive manufacturer and project documentation including: • EU Declaration of Conformity and CE documentation • PED certificates • Material certificates EN 10204 – 3.1 • Welding documents (WPS/WPQR, welder lists) • NDT inspection reports • FAT protocol and pressure test report • Roughness and surface protocols • Calibration certificates • Part drawings and parts lists • Operation and maintenance manuals Documentation fully available in digital form. TRANSPORT AND PACKAGING • Professional export packaging provided • Original industrial packaging • Crane handling possible without issues • Worldwide shipping possible SUITABLE FOR • Pharmaceutical industry • Biotechnology • WWAS, WFI, and PW systems • Sterile process solutions • GMP production plants SPECIAL FEATURE Project surplus from an international pharmaceutical new-build project with complete FAT, PED compliance, and GMP documentation. Large-capacity BRINOX 30,000 L pharma process vessel in as-new installation quality, incl. saddle supports – immediately available.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 1,500 l, Equipment: documentation/manual, BRINOX 1,500 L Process Vessel – 1.4435 – Jacketed – PED Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Tag No.: BH6722-BH1001 Year of manufacture: 2020 Condition: As new / unused CE Marking: CE 0036 TECHNICAL DATA Product type: Main/process vessel Design: Cylindrical with dished ends Working volume: 94 – 1,500 liters Empty weight: 866 kg Product contact material: 1.4435 Jacket material: 1.4307 Insulation: yes Operating pressure (vessel): -1 / +3 barg Permissible pressure (PS): -1 / +3 barg Test pressure (PT): 5.4 bar Permissible temperature (TS): -10 °C / +150 °C Date of pressure test: 2020/04 Pressure vessel according to PED 2014/68/EU Category IV Assessment procedure: Module G Notified body: TÜV SÜD Industrie Service GmbH Design code: AD 2000 SURFACES & WELDS Internal surface: Electropolished and passivated Pharmaceutical grade External surface: Industrial ground finish NDT / Inspections: RT (radiographic testing) PT (penetrant testing) Pressure testing documented 2020 EQUIPMENT • Double jacket for heating/cooling • Large frontal manway • Multiple process nozzles • CIP connections • Temperature and pressure ports • Safety fittings • Agitator mount • FDA-compliant seals • Complete piping module CONDITION • Never used in production • Stock item • Internal surface absolutely as new • No corrosion • No signs of use • Available immediately DOCUMENTATION – fully available • EU Declaration of Conformity • TÜV certificates and inspection reports • PED Module G documentation • Material certificates 3.1 (EN 10204) • Welding logs • NDT reports (RT / PT) • 2020 pressure test report Dkedpfjykuc Tox Anzjr • Surface reports • Detail and assembly drawings • FAT documents • Operating and maintenance manuals SPECIAL FEATURE BRINOX pharma process vessel in 1.4435 with electropolished internal surface, AD2000 design, PED Category IV Module G, full TÜV inspection 2020, and complete technical documentation. Project quality for sterile applications – immediately available.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,500 l, Equipment: documentation/manual, BRINOX 3,500 L Batch Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBHI-3500 Tag No.: BH6770-BH1001 Serial number: 1003460 Year of manufacture: 2020 Condition: As new / unused BH6770-BH1001 Package 28 TECHNICAL DATA Product type: Batch tank / pressure vessel Working volume: 3,500 liters Total volume: 4,304 liters Jacket volume: 202 liters Empty weight: 1,958 kg Product contact material: 1.4435 Jacket: 1.4404 CE marking: CE 0036 Permissible vessel pressure PS: -1 / +3 bar Test pressure vessel PT: 5.6 bar Permissible jacket pressure PS: -1 / +6 bar Test pressure jacket PT: 10.8 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 2 Design according to AD 2000 code Pressure vessel according to PED 2014/68/EU Category III Module G – Individual inspection Notified body: TÜV SÜD Industrie Service GmbH (ID number 0036) TÜV approval including final inspection and pressure test, fully documented. FAT – Factory Acceptance Test The vessel was fully FAT tested and approved at the factory. Tests carried out, among others: • Pressure test per PED • Visual inspection of all weld seams • Non-destructive tests (RT, PT according to test plan) • Dimensional and drawing comparison (as-built) • Internal surface roughness measurement (Ra ≤ 0.8 µm) • Calibration test of manometers • Marking verification • Complete documentation review Full FAT protocols available. DESIGN • Cylindrical, horizontal vessel • Double jacket with half-pipe system • Internally electropolished and passivated • High-gloss product contact surface • Pharmaceutical-grade welds • Manway DN 500 • Powder/product inlet DN 300 • CIP connections • Safety valve • Pressure and temperature connections • Agitator connection • Heavy-duty trunnion supports • Lifting lugs DOCUMENTATION – complete and structured Extensive project-specific quality and manufacturing documentation available, including: • EU Declaration of Conformity and guarantee certificates • TÜV certificate with acceptance report (Module G) • TÜV design review and certification • Material certificates 3.1 • Welder lists and welding procedure qualification records (WPQR/WPS) • Non-destructive test reports (RT, PT, etc.) • Analysis certificates for welding filler materials and gas • Company qualification certificate • Roughness protocol • Surface treatment report • Dimensional accuracy test report • Internal pressure test report • Calibration certificates • Reports and EU conformity of installed components • Parts list compilation • Detail drawings • Operating and maintenance manuals Complete digital documentation package available. CONDITION • Never used in production Dkedpoylng Uefx Anzjr • Stock item • Interior surface absolutely as new • No corrosion • No signs of use • Industrial new condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production plants • Biotechnological applications SPECIAL FEATURES High-quality BRINOX pharmaceutical fabrication with complete PED Module G individual approval by TÜV SÜD, CE 0036 marking, and fully documented FAT inspection. Not a standard tank – this is audited project quality with comprehensive GMP-compliant documentation.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 1,500 l, Equipment: documentation/manual, BRINOX 1,500 L Process Vessel – 1.4435 – Double Jacket – PED Module G – TÜV – FAT – 2020 – Like New Manufacturer: BRINOX d.o.o. Tag No.: BH6726-BH1001 Type: SVMBBI-1500 Year of Manufacture: 2020 Serial No.: 1003458 Equipment No.: 20051401 CE Marking: CE 0036 Condition: Like new / unused Empty weight: 866 kg TECHNICAL DATA Product type: Main filling vessel / process vessel Design: cylindrical with dished ends Working volume: 1,500 liters Total volume: 1,785 liters Product-contact material: 1.4435 Jacket material: stainless steel (double jacket design) Max. allowable pressure (PS) vessel: -1 / +3 bar Test pressure (PT): 5.4 bar Max. allowable temperature (TS): -10 °C / +150 °C Pressure vessel in accordance with PED 2014/68/EU Module: G Fluid group: 1 SURFACE & EXECUTION Internal surface: high-gloss polished, pharmaceutical design Product-contact areas made of 1.4435 Weld seams finely ground Pharmaceutical CIP-capable design EQUIPMENT • Double jacket for heating/cooling • Large manway with clamp closures • Multiple instrument and process nozzles • Pressure sensor / temperature connections • Bottom outlet Dkodpfjykuhijx Anzer • CIP/spray ball connections • Various blank flanges • Insulated media connections on jacket • FDA-compliant seals CONDITION • Never used in production • Stock item • Interior absolutely like new • No corrosion • No signs of use • Immediately available DOCUMENTATION – complete • EU Declaration of Conformity • TÜV acceptance documents • PED Module G documentation • Material certificates 3.1 • Pressure test report (PT 5.4 bar) • Technical drawings • FAT documentation • Operating manual SPECIAL FEATURE Large-volume BRINOX main filling vessel, 1,500 L in 1.4435, PED Category IV Module G, CE 0036, with complete documentation, pharmaceutical-grade surface finish, and pressure test at 5.4 bar. Project quality for sterile applications – immediately available.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,500 l, Equipment: documentation/manual, BRINOX 3,500 L Storage Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – Like New Manufacturer: BRINOX d.o.o. Type: SVBBHI-3500 Tag No.: BH6772-BH1001 Package 30 Serial Number: 1003462 Year of Manufacture: 2020 Condition: Like new / unused TECHNICAL DATA Product Type: Storage / Process Tank Nominal Volume: 3,500 litres Total Volume: 4,082 litres Jacket Volume: 226 litres Empty Weight: approx. 1,760 kg Product-contacting Material: 1.4435 (AISI 316L pharmaceutical grade) Jacket Material: 1.4404 CE Marking: CE 0036 Permissible Pressure PS (Tank): -1 / +3 bar Permissible Pressure PS (Jacket): -1 / +6 bar Test Pressure PT (Tank): 5.6 bar Test Pressure PT (Jacket): 10.8 bar Permissible Temperature TS: -10 °C to +150 °C Fluid Group: 2 Designed in accordance with AD 2000 regulations Pressure vessel according to PED 2014/68/EU Category IV Module G – Individual Inspection Notified Body: TÜV SÜD Industrie Service GmbH (ID No. 0036) TÜV approval including design review, final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel has been fully inspected and released by the manufacturer. Tests carried out include: • Pressure test as per PED • Design review by TÜV SÜD • Visual inspection of all weld seams • Non-destructive testing (RT, PT) • Dimensional and drawing check (as-built) • Review of material certificates • Calibration check of manometers • Verification of markings • Documentation review as per inspection checklist Full FAT and TÜV inspection reports available. EXECUTION • Cylindrical, horizontal storage tank • Double jacket for heating/cooling • High-quality pharmaceutical design • Manhole with round pressure closure • CIP pipework • J-pipe / internal piping • Sight glass DN80 • Multiple spare and process connections • Biocontrol flanges • Heavy-duty mounting blocks / trunnion design • Lifting lugs • Nameplate with complete PED marking DOCUMENTATION – complete and well-structured • EU declaration of conformity • TÜV certificate with inspection report (Module G) • TÜV design assessment and certification • 3.1 material certificates • Welder lists and work samples • Non-destructive test reports (RT, PT) • Dimensional inspection reports • Manometer calibration reports Dkodpfxjylnwye Anzsr • Surface and production reports • Parts list • Detailed drawings (body, lid, CIP, J-pipe, etc.) • Operating and maintenance manuals Complete digital documentation folder available. CONDITION • Never put into operation • Was in storage • Interior surface as new • No corrosion • No signs of use • As-new industrial condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Chemical media • GMP production facilities • Process and waste management plants SPECIAL FEATURE Premium BRINOX pharmaceutical-grade manufacture with full PED Module G individual inspection by TÜV SÜD, CE 0036 marking and documented FAT testing. Not a standard tank – certified project quality with comprehensive GMP-compliant documentation.

Condition: used, Year of construction: 2000, machine/vehicle number: LC593, Used complete pharmaceutical filling glass line - 3500 BPHTechnical Specifications & Performance DataThis used bottling line is a complete, second hand pharmaceutical packaging solution designed for the filling and packaging of glass bottles for infusion-type applications. The line is currently in production and supports multiple dosage formats with integrated washing, filling, capping, crimping, sterilization, inspection, labeling, cartoning, and palletizing. Engineered for sterile handling, it uses purified water (PW), water for injection (WFI), and sterile compressed air in critical stages.Production speed: 3500 bottles per hourBottle volumes supported: 0.2L, 0.25L, 0.4L, 0.5LContainer type: Glass bottles (infusion/IV-style)Line configuration: Depalletizer, Bottle Washer (PW/WFI + sterile air drying), Filler, Vacuum stage, Bottle Capper, Aluminum Crimping Machine, Tray Loader, Autoclave, De-trayer, 2 x Manual Inspection Stations, Labeling Machine, Cartoning Machine, Carton Sealer, PalletizerSterilization: Autoclave by SBMOperation status: In productionAdvanced Automation & Control SystemsThe line features integrated handling and synchronized conveyors to maintain steady flow through washing, filling, closing, and terminal packaging stages. Manual visual inspection stations are positioned downstream of sterilization to ensure product quality. Format changeover is designed to handle multiple bottle sizes from 0.2L to 0.5L, enabling efficient batch transitions. Standard pharmaceutical best practices such as sterile air drying and clean utility segregation support controlled operations. Electrical parameters and PLC/HMI specifications are line-dependent and can be aligned with site utilities.Production Line Integration CapabilitiesAs a complete packaging line, this system operates in-line from depalletizing to palletizing. The upstream sections prepare and clean glass containers, the midstream modules manage accurate filling and secure closure with crimping, and the downstream area performs sterilization, inspection, labeling, case packing, sealing, and palletizing. The line offers multi-format flexibility for 0.2L, 0.25L, 0.4L, and 0.5L glass bottles and can be integrated with site-level quality systems and traceability procedures. Conveyors and accumulation zones are configured to balance cycle times across process steps.Machine Condition & Maintenance HistoryThe line is currently in production, indicating ongoing operability and maintained status. Washing with PW/WFI and sterile air drying underscores disciplined hygienic routines aligned with pharmaceutical processing. Regular operation across all stations—from depalletizer through palletizer—demonstrates a cohesive, production-ready asset suitable for immediate deployment after site adaptation.Operational Performance & VersatilityDesigned for glass bottles and sterile liquid products, the line combines precise filling with a dedicated vacuum stage and reliable closure via capping and aluminum crimping. The presence of an autoclave enables post-closure sterilization, while dual manual inspection stations provide visual particle control. The labeling, cartoning, ... Djdjydpa Topfx Anzekr

Condition: used, This listing is for Sanyo MPR-720 Labcool Pharmaceutical Refrigerator The unit is in full working condition and ready for immediate use Designed for stable and uniform temperature control, this pharmaceutical refrigerator is ideal for storing vaccines, reagents, and sensitive laboratory materials with precision and reliability. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) Dsdpfx Aoyyxbyjnzjkr • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished)

Condition: ready for operation (used), functionality: fully functional, tank capacity: 73 l, usable tank capacity: 50 l, total length: 1,200 mm, total width: 1,500 mm, total height: 2,000 mm, Process system for the production of creams, ointments, and suppository bases Design for foaming products TECHNICAL DETAILS Useful volume: 50 L Total volume: 73 L Minimum filling volume: 10 L Homogenizer Model: Brienz RF 112 M-2 Power: 4 kW Speed: max. 2,850 rpm Mixer/Scraper Dedpfxjzrfbbj Anzskr Gearbox: SEW FAF 37 Speed: max. 28 rpm MACHINE DETAILS Space requirement: 1,200 × 1,500 × 2,000 mm

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, temperature: -75 °C, total length: 1,300 mm, total width: 1,300 mm, total height: 2,000 mm, usable tank capacity: 100 l, The system was professionally dismantled and decommissioned by the manufacturer. The plates were stacked together. TECHNICAL DETAILS Ice condenser volume: 100 l Ice condenser capacity: 12 kg Ice condenser output: 8 g/24 h Ice condenser temperature: -75 °C Dksdpfx Anezrfa Dszor MACHINE DETAILS Dimensions Space required for freeze-drying system: 1,300 × 1,300 × 2,000 mm Space required for additional component: 1,800 × 600 × 2,000 mm

Condition: used, Little used Silverson model GX10/1500 stainless steel multipurpose batch high shear mixer. Unit has general purpose disintegrated head. Unit direct driven with 7.5kW, 1470rpm motor. Includes Silverson model D/Lift hydraulic operated raise & lower mobile stand rated 300kgs safe working load. Dkjdpfey Inr Rox Anzer

Condition: used, Comprehensively tested, used Olsa Process Mixing Suite. This mixing suite comprises of: Dsdpfx Anoymaz Hjzokr 2 off Olsa Pharmaceutical grade mirror polished 316 stainless steel vacuum mixer homogenising vessels.  Full hydraulic raise/lower with electrical panels, touchscreen PLC controls, CIP pumps, diaphragm product discharge pumps, both vessels on load cell system. Manuals/drawings included. Technical specification below for each main process vessel.   Vessel 1 Gross capacity 266L, full scraped wall 2.2kw anchor mixer, contra rotating mixer 1.1kw, bottom entry high speed homogeniser 7.5kw.  Vessel rating 2.5bar plus full vacuum at 155 Degrees C.  Jacket 4.5bar 155 degrees C. CIP system.  150mm dia hinged chargeport with sight glass, vessel light.  Numerous top dish connections, vacuum pressure gauge, 30mm dia outlet.  Vessel dimensions 1.3m x 2m x 2.4m closed.   Vessel 2 Gross capacity 266L, full scraped wall 2.2kw anchor mixer, bottom entry high speed homogeniser 7.5kw.  Vessel rating 2.5bar plus full vacuum at 155 Degrees C.  Jacket 4.5bar 155 degrees C. CIP system.  150mm dia hinged chargeport with sight glass, vessel light.  Numerous top dish connections, vacuum pressure gauge, 30mm dia outlet.  Vessel dimensions 1.3m x 2m x 2.4m closed.

Condition: used, Used Netzsch model PMD VC2500 stainless steel variable capacity pre-mix disperser. Approximately 600-2500 litre working capacity. Unit has welded base and bolted dished top head. Has top entry stainless steel 3-tier 4-blade pitched paddle agitator direct driven by 7.5kW, 415 Volt, 3/50, 1435rpm motor via Renold model PM60 gearbox rated 48.2/1 reduction ratio. Unit has bottom entry stainless steel scraped surface agitator belt driven by 7.5kW, 3/50, 1,440rpm motor via Renold model SMH8 gearbox rated 25/1 reduction ratio. Has external heating/cooling jacket. Unit has bottom discharge. Dkjdpsy Ddv Dsfx Anzjr

Condition: used, Used Babcock Gardner Type 100L 316 stainless steel ribbon blender. Approximate 100 litre working capacity. Mixing trough approximately 350mm wide x 500mm deep x 1000mm long. Single interrupted ribbon direct driven by a 1.5 kw 415 volt 3/50 1420 rpm motor through a David Brown GHT 2 gearbox with a ratio of 20.34/1 and an output RPM of 71.3. Specifications: Capacity: 100 L Material of construction: 316 Stainless Steel Width: 350 mm Horsepower: 1.5 kW Dkjdjzfh U Djpfx Anzer Length: 1,000 mm Jacket: No Type Of Ribbon: Single

Condition: used, Used Hosokawa Nauta type conical mixer, approximately 750 litre working capacity. Dkedpfezbuhdjx Anzer

Condition: used, Used Morton-Lodige stainless steel ploughshare mixer. Unit believed to be FKM1200D, approximately 1200 litres capacity. Unit measures approximately 1750mm long x 1000mm diameter. Unit has stainless steel ploughshare blades and (2) stainless steel half ploughshare blades driven by motor/gearbox. Unit has a pneumatically operated bottom entry discharge valve. Has provision for (2) choppers but none currently fitted. Unit is mounted on a mild steel frame. Specifications: Dkodjy Inr Depfx Anzer Bowl Volume: 1,200 L Material Of Construction: Stainless Steel Choppers (Y/N): N Vacuum Internal (Y/N): N Jacket (Y/N): N

Year of construction: 2021, condition: excellent (used), functionality: fully functional, REF: MM6471 1 x 2021 CERTUSS complete steam generator system (Type – CERTUSS Universal 600 TC) with chemical dosing and blow-down vessel, automatically PLC controlled. The 2021 CERTUSS Universal 600 TC Complete Steam Generator System is a high-performance industrial steam generator designed to deliver reliable, energy-efficient process steam for continuous production environments. With a steam capacity of 600 kg/hour, the system is ideal for food and beverage processing, bakeries, meat and fish processing, ready meal production, pharmaceutical manufacturing, commercial laundries, chemical processing, and other industrial applications. KEY SPECIFICATIONS: Manufacturer: CERTUSS. Model: Universal 600 TC. Date of manufacture: 2021. Steam output: 600 kg/hour. Fuel: Propane (but can be converted). High-efficiency industrial steam generator. Compact vertical design. Fast start-up from cold. Automatic PLC control system. Complete steam generator package with ancillary equipment. Suitable for continuous industrial process steam applications. Djdpfszn Rcijx Anzekr Condition: Excellent - very low working hours.

Condition: used, Reportedly unused Sinclair Stainless Fabrications approximately 20,000 litre nominal capacity vertical 316L stainless steel fermenter/bioreactor, approximately 15,000 litre working capacity with (4) zone limpet coil jacket. Unit has a welded dished top and bottom. Internal rated -1/+3barG internal operating at 0-159degC. Internal coils rated -1/+5barG and limpet coils rated -1/+5barG operating at 0-159degC. Mixer Drive = Nominal Speed: 100 RPM; Motor: 55KW 1500RPM 250 IE3 IP55 3PH 230/400V 50HZ; Gearbox Input Coupling: Integral w/Gearbox; External Paint Finish: Standard Paint; Colour: Blue RAL5005 Mounting = Arrangement: Structural Nozzle w/Flange Shaft Seal = Mechanical Seal: Custom Seal - No Bearing Balanced (AES CDM C/SiC/C/SiC-AFLAS(3) - Double Mechanical Seal. ) Mounting Flange = Flange Size: DN400 [16”]; Flange Class: CL-150; Flange Dksdpfx Anjyln E Rezjr Material: 316 Stainless Steel Face & Core Shaft = Shaft Diameter: 4-1/2”; Shaft Extension: 6754 mm; Shaft Material: 316 Stainless Steel Impellers = Impeller #1: 921 mm BT-6; Impeller #2: 959 mm W-4; Impeller #3: 959 mm W-4; Impeller #4: 959 mm W-4; Impeller Material: 316 Stainless Steel Mixer Options = Gearbox with Food Grade Lubricants Design Compliance = Machinery Directive 2006/42/EU Specifications: Capacity: 15,000 L Type of stainless: 316L Internal Pressure: -13 bar Internal Temperature: 0°C Jacket Pressure: -15 bar Jacket Temperature: 0°C Diameter: 1,800 mm Straight Side: 5,900 mm Legs/Lugs: Mounted on (4) legs Weight: 6720kg Dimensions: 2400mm diameter x 7500mm height