Used Bottles for sale (1,204)

Condition: ready for operation (used), COMPLETE PET BOTTLES ASEPTIC STILL/GAS FILLING LINE, YOM 2002-2007 CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH THE LINE INCLUDES: PREFORM DEPALETIZATOR BLOWING MACHINE KRONES CONTIFORM S16 BOTTLE AIR CONVEYORBOTTLE RINSE, STERILIZATION, FILLING UNIT, KRONES CAF VODM 100, 60 RINSER, 80 FILLERS 28mm CAP STERILIZATION UNIT KRONES LABELING MACHINE CAPACITY 35.600 BPH LASERCODER Guedjxm Rwqepfx Ag Noh BOTTLE CONTROLLER CONVEYORS SYSTEM FOIL SHRINK MULTIPACK, KRONES TWINPACK APPLICATOR PALLETIZER KRONES ROBOT 3A BELADER WITH PALETT MAGAZINE PALLET BINDER UNIT HB PALLET CODER UNIT EAN 128 RULAND TUBULAR STERILIZATOR WITH CIP UNIT STERITANK ROTH, CAPACITY 11 TONS CARBONISATION UNIT RULAND ECOLAB HYGIENE CENTRE RULAND STERILWATER PLANT THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION.

Condition: reconditioned (used), Year of construction: 2018, STORK VS 24/8 Monobloc Bottling Line, fully refurbished by the professional company Z.M. ROBAK. The machine is virtually unused, with the protective film still on the housing. Currently, it is set up for filling glass containers – it has been test run for bottling alcohol. Filling valves: 24 pcs (with light vacuum for still beverages) Capping heads: 8 pcs (configured for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Capable of operating with bottles of the following dimensions (after format adjustment): - Diameter: 45 mm to 110 mm - Height: 105 mm to 400 mm - Standard neck diameter: 28 mm - Optional neck diameter (after format change): 18 mm to 43 mm Machine dimensions: - Width: 2,900 mm - Height: 2,200 mm - Depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture/modernization: 2018 – has not been used in production since refurbishment Condition: The machine is practically as new, with negligible signs of use. Godpju Nhiqefx Ag Nouh The machine comes with original electrical documentation.

Condition: used, Used Kosme edible oil PET bottle filling line with capacity 3000 bottles / hour and including blow moulding equipment. Made in 2012 and with only approximately 72 hours of use. Last used on sunflower oil and suitable for bottles sized 1l (3000 BPH, press cap, hot melt label), 2l (2800 BPH, press cap, hot melt label), 5l (2000 BPH, screw cap, adhesive label) and 10l (1000 BPH, screw cap, adhesive label). Line includes the following equipment: - Kosme KSB 2XL/4F blow moulder. Preform neck dimensions: smallest neck 28mm, largest neck 48mm, neck ring diameter 53mm, neck height 22mm, max length (under neck ring) 200mm. Preform bottle dimensions: max diameter 235mm, max height 430mm, base height 55mm. - Filler / capper model Weighblock 16/1440 6/540 P. - Labeller model Extra HM 4/720 Sa1 E1. - Packer model Acepack 2/4T. - Carton erector model Formapack H. - Carton sealing unit model Sealpack H. - Palletiser and stretch film wrapper. - Coders, handle applicators, elevators and conveyors. Gujdow U A Ilspfx Ag Noh - (8) 25000 litre oil tanks, compressor, dryer, air tank, spare parts, auxiliary equipment and approximately 100,000 PET preforms.

Condition: used, Year of construction: 2002, Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  Line capacity: 12,000 bph at 0.5 L 9,000 bph at 1.0 L 8,000 bph at 1.5 L 6,000 bph at 2.0 L Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L Neck finish: PCO 1810 Max. bottle diameter: 106 mm Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water Labelling: Wrap-around, pre-cut paper labels, hot-melt Secondary packaging: Film only (4×3 and 3×2) PLC: Siemens S7-300 Power supply: 400 V, 3PH, 50 Hz, TN-S Scope of Delivery Blowing machine | Krones | Contiform S8 | 2002 | Incl. preform feeding, chiller, box titling unit Rinser | Krones | Variojet | 2002 | Rotary Filler | Krones | Mecafill | 2002 | Rotary, isobaric filler for CSD and beer Labeller | Krones | SV 360-10-113 | 2002 | Rotary Labeller | Krones | Canmatic 600-10 | 2002 | Rotary, hot-melt Packer | Krones | Variopac FS-45 | 2002 | Film packer, 4×3 / 3×2 formats Palletizer | Krones | Pressant Compact 1N | 2002 Stretch wrapper | Robopac | Rotoplat | 2002 Air conveyor | Krones | Airco S | 2002 | For blown PET bottles Bottle conveyor | Krones | Synco S | 2002 | For filled and labelled bottles Pack conveyor | Krones | Multico S | 2002 | For product packs Pallet conveyor | Krones | — | 2002 | For pallet transport Peripheral equipment | Krones | — | 2002 | Cap feeding system, hopper, valve manifold Godoxhf Hispfx Ag Nouh

Year of construction: 2013, condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Godpfx Asu Thpnog Njuh Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Weight: approx. 2500kg Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Condition: used, Year of construction: 2007, This is a Sidel SBO 4 blow moulder, it’s designed to receive preforms of 38 mm neck size caps and blow mould the bottles . The speed of the machine is at 6,000 bottles per hour on 2 litre round bottles . The year of manufacture is 2007 and the condition is very good. The is delivered with the pre forms hopper and elevator. Capacity: 6000 b/h Volumes: 250-500-1000-2000 ml Neck Size of preforms: 38 mm Format: Round bottles Air consumption: 11 bar Gjdpew S Icisfx Ag Neuh Controls: SIEMENS SIMATIC MULTI TOUCH PANNEL Available: Immediately

Condition: used, Year of construction: 2002, Item: Small Bottle Filling Machine Primodan Gjdpferwnm Hex Ag Nouh Type: Primodan MK II Rotary Bottle Filling Machine for liqued up to 400 ml Used for small PET bottles 250 ml - 400 ml Complete with Crew Cups Year: 2002 CEE machine, Capacity 2.500 pc/h Stationed: Denmark

Condition: used, Year of construction: 2001, PET single-use filling line for water, soft drinks and fruit spritzers. Bottle formats: 0.5 L, 1.0 L, 1.5 L Nominal output: 24,000 bottles/hour (with 1.0 L) The new bottles are destacked on pallets at the new bottle unstacker and transported pneumatically to the rinser. The system consists of: - Markant 1ASH-PL new bottle unstacker Manufacturer: KHS Year of manufacture: 2001 - Pneumatic bottle transport Manufacturer: KHS Year of manufacture: 2001 - Premix system Intermix 240 EIÜD Manufacturer: Ortmann & Herbst Year of manufacture: 1978 with downstream Velcorin dosing - PET rinser: Innoclean FR-ZR 70/113, 1 B/RL Manufacturer: KHS Year of manufacture: 2001 With chlorine dioxide and sterile water rinsing - PET filler Innofill DRV-VF-PET Manufacturer: KHS Year of manufacture: 2001 With Alcoa screw capper and liquid nitrogen dosing - Fill level control Manufacturer: miho Year of manufacture: 1992 - Container transport Manufacturer: KHS Year of manufacture: 2001 - Labelling machine for wrap-around labels Manufacturer: KHS Year of manufacture: 2003 With hot melt glue melter and best-before date printer Features: New glass removal system; pneumatic bottle transport; premix; rinser/filler/capper; fill level control; container transport; labelling machine Gusdpfx Ajxhd Apjg Noh

Condition: used, Used Framax glass bottle filling line with capacity approximately 2900 bottles / hour made in 2017 and used for approximately 2500 hours. Equipment includes isobaric bottling machine model Modulblock RFC1-16/16/1-DPS/C and also depalletiser, packer (box former, 24 bottles/box). Gujdpfsw U A Ifox Ag Njh Previously used for craft beer and RTD (Ready To Drink) carbonated pre-mixed alcoholic drinks. Equipment list and additional photos available on request.

Condition: used, Year of construction: 2019, Overview    This filling line for returnable glass was installed in 2019 and essentially consists of a bottle washer, rinser/filler and capper block and a labeling system with laser printer. The bottling line is vacant as the previous owner is closing the brewery due to retirement. The bottling process ran smoothly until the end.  The equipment is still installed and connected and can be viewed in person at any time.   Technical details  Capacity: max. 1,500 bph (1,000 bph were actually run)  Bottled product: Beer   Included formats: 0.33l longneck, 0.5l NRW  Closure: Crown cap  Scope of delivery  Bottle washer | SEN | 1989 (overhauled and installed in 2020)  Isobaric filler block | Shandong Yuesheng | 2019   Rinsing positions: 14   Filling positions: 12   Capping positions: 5   With pre-evacuation   Counter-pressure filler incl. 2 formats 0.33 longneck 0.5 NRW  Dry tunnel | Shandong Yuesheng | 2019  Labeler incl. laser printer   Collecting table   Godpfx Agsxgfr No Njuh

Condition: used, TECHNISCHE ANGABEN Anzahl Stationen: 2 Stationen für Selbstklebeetiketten Etikett: Deckel + Boden   Etikett-Breite: 30-300 mm (zu spezifizieren) Behälterformat: runde und eckige Flaschen Seitliche Gurtbänder zum fixiren der Produkte beim Etikettieren Leistung: bis ca. 4000 Fl./Std. CE Konformität: Erfüllt die CE Richtlinie Gewicht: ca. 600 KG Abmessungen: 2800(L) x 1300(B) x 2400(H) mm   YouTube Video:   Technical Details : working direction : left-right, linear capacity bph max. : 4000 labels : self adhesive labels number of labelling stations : 2 bottle diamater max (mm) : 120 Godjwm R Tzepfx Ag Nsuh bottle diamater min (mm) : 40 bottle height max (mm) : 330 bottle height min (mm) : 60 speed adjusment : frequence converter

Condition: excellent (used), Complete line direct from Bankrupt company which was filling capsules and tablets into small tubs. Bottlea are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Gedpfxjw Hz T Ee Ag Neuh

Condition: new, Year of construction: 2025, Machine to close (seal with film onto the edge of bottles, glases, cans, etc.) container with a neck diameter of 30-90 mm. Working direction: from left to right. - Specifications: max. speed of the machine in neutral: 40 cycles/minute; 380V, 2.0kW; Machine dimensions: L1600xW800xH1160mm; weight: 180kg. Guedev Nk Tbopfx Ag Nsh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 2007, Capacity: 18000 bottles/h Features: Height adjustment, control device for closing pressure, mechanical / pneumatic testing of shackle tension, high-pressure injection device, rinsing and swelling device Gjdpfexbpdxsx Ag Neuh

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), Gedpfxjxiv E Es Ag Nsuh - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Condition: used, Year of construction: 2007, Overview  The offered filling line for returnable glass bottles is composed of a selection of high-quality machines, chosen by BEVMAQ. Most of the machines were previously used in breweries in Germany. The condition of the machines is good, as they have been regularly maintained and continuously serviced. Apart from some of the machines, the majority has been dismantled by a German partner company and are now stored in a warehouse. The line layout can be adapted to the customer's needs and his plant layout, as the conveyors will be new or refurbished. Tech Specs  Capacity: 40,000 bph at 0.5 l bottles Suitable: Carbonated water and soft drinks Beer / Beer Mix recently serviced, regularly maintained Formats processed: 330 ml  500 ml YOM: ranging from 2007 to 2016 The Line in Detail Crate Depalletizer | Krones | Pressant Duplex | 2011 Includes safety fences, conveyors, offloading table Decrater | Krones | Linapac II | 2012 Machine can work as crater and decrater Bottle Washer | Krones | Lavatec | 2013 Crate Washer | Klotzki | 2011 Empty Bottle Inspector | Miho | David 2 | 2016 Counter Pressure Filler + Capper | KHS | Innofill DRS | 2013 Fill Level Inspection | KHS | 2013 Includes bottle rejection system and conveyor belt Tunnel Pasteurizer | Krones | Linaflex | 2013 Cold Glue Labeller | Krones | Topmodul | 2015 Includes a module prepared to work with seal label With servo driven bottle orientation Crater | Krones | Smartpack | 2011 Crater Palletizer | Transpak | NEW Bornbinder | Born| - | NEW Mixer | Famix | 30,000 - 2K | 2008 Flash Pasteurizer | GEA | 25,000 | 2007 All pallet, crate or bottle conveyors will be individually adapted to the plant design, manufactured in KHS/Krones standard. Necessary format parts for bottle, label, crate and cap handling can be supplied. Gedpjxf D Dbjfx Ag Njuh

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 10449319, total height: 2,330 mm, total width: 1,560 mm, total length: 2,850 mm, type of input current: three-phase, overall weight: 1,500 kg, For sale: Labeling machine SACMI KUBE K20-600 10T ADH (S2/E2) + CG (S1/SU) + CE Year of manufacture: 2021 Serial number: 10449319 Condition: Fully functional, with complete documentation Technical parameters: Capacity: 6,000 bottles/hour Bottles produced: 166,693 pcs Number of stations: 10 Type of bonding: Self-adhesive labels Label positions: Front, back, stamp (inspection mark) Support for various bottle types: Bottle formats: Guedpjxfka Ajfx Ag Noh 0.5 l round 0.7 l round 0.7 l square 1 l round Bottle diameter: 60 – 120 mm Bottle height: 150 – 370 mm Labels: Label length: 30 – 120 mm Label height: 30 – 180 mm Machine documentation is available. The machine is currently fully functional and ready for immediate use in production. The machine is mounted on raised 30 cm supports due to the height of the conveyor belt. Last service inspection: 22.11.2024

Condition: used, Bottling line with a capacity of 30,000 bph. 0.33 litre Vichy, 0.33 litre Euro and 0.5 litre NRW non-returnable bottles can be used. The line consists of the following machines/components: - New glass unscrambler Manufacturer: Steinle Fördertechnik - Beer preheater Manufacturer: Fischer - Bottle filler Manufacturer: Krones - Crown cork filling hopper with transport Manufacturer: Gassner - Bottle level control Manufacturer: Metec - Labeller Manufacturer: Krones/Renner - Labelling control Manufacturer: Miho - Bottle carrier labeller Manufacturer: DOKU-Consult Capacity: 30000 bottles/h Formats: 0,33l Vichy, 0,33l Euro and 0,5l NRW Operation / Control: mainly Siemens S7 Position: free standing Guedpfsw Tmhasx Ag Noh Features: New glass clearer; beer preheater; bottle filler; crown cap filling bunker with magnetic transport; bottle level control; labeler; label control; packer; full crate control; palletizing system Layer patterns: 4x8 boxes, 5 layers, on Euro pallet

Condition: used, Year of construction: 2015, Overview  This glass filling line was manufactured in 2015–2016 by German manufacturer Krones/Kosme. It is designed for 330 ml longneck non-returnable bottles with a capacity of up to 5,000 bottles per hour. The line is in good working condition and is offered with all main components from depalletizing to packing. Availability is immediate. Technical data  Capacity: 5,000 bph (330 ml longneck NRB) Formats: 330 ml longneck glass bottles Neck finish: Crown cap Scope of Delivery  Depalletizer Rinser/Filler/Capper | Kosme (Krones) | Barifill | 2015 | Integrated glass filler block Labeller | Kosme | Unicol | 2016 | Bottle Inspector | Krones | Checkmat | 2016 spection system Date coder | Videojet | 1520 | – | Inkjet coding Semi-automatic packer | TilTech Gedpfexb T Sgjx Ag Nouh

Condition: used, Year of construction: 2009, Inspection system for neck, body and back labels as well as fill level and crown caps Manufacturer: Miho Model: Newton- EC 2001 Year of manufacture: 2009 Additional title: label control for bottles Capacity: 30000 Bottles/h Power: 50 W Current: 0,2 A Voltage: 230 V Guodpfxjw Tazaj Ag Neh Frequency: 50/60 Hz Length: 3100 mm Width: 1600 mm Height: 1500 mm Formats: 0.5L NRW, 0.33L Vichy, 0.33L Euro, 0.35L Lemonade Running direction: right -> left Position: free standing Base construction: Electronics cabinet on tubular feet with spherical caps Features: Electronics cabinet, measuring devices, fault container rejection

Condition: used, Year of construction: 2000, Overview This complete PET bottling line for CSDs, mineral water and other beverages dates mainly from the year 2000, with the exception of the blow molder (KHS, 2016) and some additional conveyor units. Depending on the bottle size, the line achieves an output of up to 22,000 bottles per hour and processes non-returnable PET bottles with a PCO 1810 neck finish. The bottles are packed in 6-packs on Euro pallets (120x80 cm) or DÜDO pallets (80x60 cm). The filler was originally designed as an aseptic filler, but is currently operated as a standard filler. The line is still in production in Germany until October 2025 and can be viewed there under real conditions. Technical details  Output: 13,500 bph - 1.5 l PET 15,000 bph - 1.0 l PET 22,000 bph - 0.5 l PET Neck finish: PCO 1810 Packaging formats: 6 x 1.5 L (six-pack) 6 x 1.0 L (six-pack) 6 x 0.5 L (six-pack) Pallet formats: Euro pallet 120x80 cm DÜDO pallet 80x60 cm Machine list  Blow molder | KHS | InnoPET Blomax 10S | 2016 | incl. Box Tipper BTW CDL 2000, incl. Lifting & Tipping Unit InnoPET F25R (2016), for automatic preform feeding Compressor | Atelier Francois | CE46B | 2000 | - Air conveyor | Krones | AIRCO S | 2000 | - Air conveyor | Krones / Sismatic | - | 2016 | - Mixer | Krones | MS 25/2 | 2000 | - Tribloc (Rinser, (rinser, filler, capper) | Krones | - | 2000 | 100 rinsing points (Variojet), 80 filling valves (volumetric PET), 15-head screw capper (PCO 28 - 1810), Pitch 113 mm Injector | Krones | Varojet 2520-070-113 | 2000 | - Fill level/cap inspection | Krones | Checkmat FM-G | 2000 | - Container/label inspection | Krones | Checkmat FE-G | 2000 | - Labeller | Krones | Canmatic 720-15 | 2000 | - Container transport | Krones | Synco S | 2000 | - Packaging machine | Krones | Variopac TFS-60 | 2000 | One- way packer Container transport | Krones | S | 2000 | - Pack transport (2 pieces) | Krones | Multico S | 2000 | - Carrying handle applicator | Twin- Pack | - | 2000 | - Palletizer & Depalletizer | Krones | ROBOT 3A | 2000 | - Pallet conveyor | Krones | - | 2000 | - Pallet inspection | Krones | LPKD | 2000 | - Layer pad inserter | Krones | Pressant F1M-0467 | 2000 | - Pallet labeler | Logopak | Logomatic 920 PF | 2000 | - Guedpfxjw Sux Rs Ag Noh

Condition: used, Year of construction: 2008, Overview  This complete PET water bottling line was manufactured on average in 2006 by European manufacturers including Siapi, Melegari S.p.A, P.E Srl, k, Comag, TMG, Domino and Atlanta. The line will remain in production until the end of June 2025, offering the possibility to see it live in operation. All equipment is in very good working condition with complete maintenance history, making it an immediately operable turnkey solution. Technical data  Capacity: up to 6,800 b/h for 0.5L bottles, up to 6,000 b/h for 1.5L bottles Formats: 500ml PET, 1500ml PET Neck finish: 30/25 Packing: 500ml bottles: 24-pack shrink film 1.5L bottles: 6-pack shrink film Bottle diameters: 203mm (0.5L), 317mm (1.5L) Equipment condition: very good, complete maintenance history available Scope of Delivery Blow molding machine: Siapi EA4 Filling machine: Melegari S.p.A Fill Jet 20/20/4 Labeling machine: P.E Srl 8T.540.1S.1E Shrink tunnel: k Tunnel 70S Shrink wrapper: k Nice Wrap35 SFUSO Handle applicator: Comag H 40/1 Palletizer: TMG Inkjet printer: Domino A200 Gusdpewz H Ahofx Ag Nsh

Condition: used, Year of construction: 2002, Overview  This complete PET bottling line was manufactured between 1999 and 2007 by Krones (Germany) and other European suppliers. It is currently still in operation and used for filling carbonated water and lemonades into 1.5L PET bottles. The line has an output capacity of up to 16,000 bottles per hour. It has been regularly serviced and remains in good working order. Availability: end of August 2025. Technical data  Capacity: up to 16,000 bph (based on 1.5L PET bottles) Formats: 1.5L PET bottles (short neck and lid) Bottle material: PET Type of filler: Isobaric filler Year of manufacture: between 1999 and 2007 (various machines) Cap type: short neck Type of label: OPP (Contiroll) Scope of Delivery  1 x Blow molder CONTIFORM S16 | Krones | 2002 | incl. preform hopper & cooler Air conveyors from blowing to labeler & filler 1 x Labeler CONTIROLL | Krones | 2000 1 x Tribloc 77/88/11 MECAFILL isobaric filler | Krones | 2002 | incl. metal detector 1 x Mixer for carbonated water and drinks | ca. 2000 1 x Inkjet printer HITACHI RXS Conveyors between filler and tunnel 1 x Shrink tunnel VARIOPAC | Krones | 2007 | 45 packs/min 1 x Package holder applicator TWIN PACK MDE INOX | 2003 | single-row, 45 packs/min Transport of packages to palletizer 1 x Palletizer KETTNER KR51112 Pressant Universal | 1999 Pallet feeder with lift and transport 1 x Pallet ring wrapper ROBOPAC GENESIS | 2002 Guedpfx Agowzvl Se Njh

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers. The line is suitable for still and carbonated soft drinks and includes a blow moulder with compressed air generator, rinser/filler/capper, labeller, packer, palettizer, stretcher, conveyors inspection systems, mixing- and CIP-unit. The line reaches up to 8,000 bph at 1,5 l and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 8,000 bph at 1,5 l  Formats: 0,5 l and 1,5 l bottles Filling product: Water and carbonated soft drinks Closure system: Plastic screw caps Sport caps Packing: Shrink pack: 3x2 formation at 0,5 l and 1,5 l PET bottles Pallet type: Euro (1,200 x 800 mm) Düsseldorfer (600 x 800 mm) Scope of Delivery  Blow moulder: SIPA, year 2002 Compressed air generator: Kaeser, year 2002 Rinser/filler/capper: Procomac, year 2000 Number of rinsing nozzles: 24 Number of filling valves: 24 Number of capping heads: 6 Labeller: Futura, year 2000 For the labelling of opp labels with hot melt Inspection device: Logics & Controls, year 2000 For the control of fill height, capping and label Shrink packing machine: Krones TFS Variopack, year 2001 Handle applicator: Twinpack, year 2001 Tray labeller: Logopack, year 2001 Pallet stretcher: Born, year 2001 Palletizing unit: Levanti / Profipack CIP-unit: Corosys, year 2012 CO2-degassing unit: Corosys, year 2012 Gujdowq Sfgspfx Ag Njh

Condition: used, Year of construction: 2020, Overview  This complete bottling line was last used for bottling spirits and includes a rinser filler combo with capper for t cork, conveyor belts, carton erector and sealer. The line achieves a maximum output of 2,000 bottles per hour, depending on the bottle volume and product. As production volumes are increasing, the seller has received a new line with higher capacity. To present the line in decent condition, the seller has installed it in the ware house. Technical details  Output: 2,000 bottles/hour Different bottle shapes possible as the height and width can be adjusted Bottle volumes from 0,5l to 3,0l are possible Last used for: Spirits, can also be used for other liquids Scope of delivery  Project AE PRORINS2000 Linear rinser with speed up to 2,000 bph (2020) Project AE PROFILL2000 Linear filler with 10 electrically controlled filling valvesc(2021) Borelli Capper for T-cork Conveyor belts Lantech C-300 carton erector (2021) Godpfx Aswqpkaeg Nsuh