Used Photocell for sale (199)

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: AI/086060718, overall weight: 3,450 kg, total length: 5,500 mm, total width: 2,400 mm, total height: 2,400 mm, operating pressure: 6 bar, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, rotational speed (max.): 1,400 rpm, Denver Skema Logic from 2018, in good condition, for automatic and manual operations. New wooden bed has been fitted, cleaned and tested. Front safety photocells can be added on request. Dcsdjzcm Uxjpfx Apmep

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, SEMI-AUTOMATIC TURNTABLE, FOR PALLET WRAPPING WITH STRETCH FILM Power Prestretch Pallet Wrapper from the UK agent for Noxon (Robopac is manufacturered by the same company) Upward-downward carriage speed Top and bottom reinforcement wraps Film tension Table rotation speed Ergonomic carriage stop at the end of the cycle Upward-downward cycle Only upward cycle Manual cycle Self learning cycle Altimeter and photocell delay VAT to be added to final price Loading ramp available at £250 plus VAT Dodpfx Ajxwa Iyjpmscp Delivery within 200miles available at £225 plus VAT

Condition: good (used), Year of construction: 2024, functionality: fully functional, Manufacturer: Pony Model: KITE Type: Shirt finishing machine Year of manufacture: 2024 Used, with minor signs of wear, in good condition (the fabric of the dummy attachment has a small tear on the left side) Without power plug From a business liquidation Technical data according to the manufacturer: With air blast technology for ironing dress shirts, women's blouses, and polo shirts Steam-heated SMALL dummy attachment Shirt tensioning slide, photocell for automatic positioning Automatic device for lateral tensioning of the shirt Semi-automatic front pressing bar, with pneumatic closure Two sleeve tensioning clamps, height-adjustable by gas spring Anatomical attachment of the sleeve in an oval shape, suitable for long and short sleeves Hot air recovery system Touch screen - PLC control for storing programs, diagnostics & programmed maintenance Adjustable feet Mirror Electrically heated 400V/50Hz connection Fan motor: 1.5 kW Extraction motor: 0.25 kW Dimensions (W x D x H): approx. 198 x 126 x 230 cm Weight: 360 kg Accessories: electric ironing unit Dcjdpfx Aoz Ibduopmjp Inspection or collection is possible by appointment.

Condition: used, Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. The format on the machine is Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 40 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a later build on photocell on the paper infeed, to control the exact position of the print on the foil. Outfeed conveyor.  Dedpszhlmiefx Apmecp Type of Machine: Butter Packaging Machine Capacity: ± 600 Kg/h Butter Brick Dimensions: 125mm length x 55mm width x 40 mm height Weight: 250 grams Machine Weight: 840 kg Packaging type: Aluminium and Parchment Paper Motor power: 1,5 kW

Condition: used, Year of construction: 1979, functionality: fully functional, working width: 1,100 mm, working height: 160 mm, type of input current: three-phase, input voltage: 380 V, OTT RS-O 110 Wide-Belt Calibrating and Sanding Machine Dcjdsz Dxkdjpfx Apmjp Used industrial wide-belt sanding machine manufactured by OTT. The machine is equipped with two sanding units and is suitable for calibrating, pre-sanding, and fine sanding solid wood, furniture components, and panel materials. Technical specifications: Manufacturer: OTT Model: RS-O 110 Year of manufacture: 1979 Machine number: 354 Maximum working width: 1,100 mm Maximum workpiece height: 160 mm Number of sanding units: 2 Total installed power: 30 kW Power supply: 380 V Feed speeds: 2 Operating pressure: 8–10 bar Dust extraction connections: 2 × Ø 200 mm Approximate dimensions: 2,230 × 2,020 × 2,050 mm Approximate weight: 3,000 kg Machine configuration: Grooved rubber calibration roller Pneumatic sanding pad with metal rollers Pneumatic sanding-belt oscillation with photocell control Electrically adjustable working table Integrated cleaning brush Industrial heavy-duty construction The machine is offered in used condition. Its actual condition, equipment, control panel, and internal components are shown in the photographs. Inspection is possible by prior appointment. Location: Gātciems, Latvia Loading assistance can be provided. European transport can be arranged upon request. Price: EUR 2000 net, excluding VAT.

Condition: ready for operation (used), functionality: fully functional, working width 950 mm calibrating unit with metallic roller Dcedpfxozz Nkrs Apmop combination unit with rubber roller and automatically engaged shoe star-delta start pneumatic oscillation controlled by photocells two conveyor feed speeds motor power 11 kW year of manufacture 2000 power supply 400V weight 975 kg

Condition: used, Year of construction: 2019, Vertical packaging machine (VFFS) with servo drives and Videojet printer This Wolf VPC 250 is a vertical form-fill-seal machine built in 2019 by Wolf Verpackungsmaschinen. It forms bags from reel-fed film, fills and seals them, and can be combined with multihead weighers, linear weighers, auger fillers and other dosing systems. According to the specifications for the VPC 250 series, it makes bags of approx. 50 to 250 mm wide and 80 to 450 mm long, from film up to approx. 600 mm wide, with a fill volume of up to approx. 6 litres. What is achievable depends on the installed forming set, the product and the film. The machine has a Siemens SIMATIC touchscreen with PackML control, SEW drives and servo-controlled functions, dual vacuum-assisted film pull belts, a photocell for printed film and an integrated knife. The front and rear cross seals and the vertical seal each have their own temperature control. An integrated Videojet DataFlex 6320 thermal transfer printer prints dates, batch numbers and barcodes directly onto the film. Spare film pull belts and parts are available with the machine. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Dsdpfsz I Inaex Apmjcp Type: Vertical form-fill-seal machine (VFFS) Bag width: approx. 50–250 mm Bag length: approx. 80–450 mm Max. film width: approx. 600 mm Max. fill volume: up to approx. 6 litres Controls: Siemens SIMATIC touchscreen, PackML Drives: SEW, servo-controlled Printer: Videojet DataFlex 6320 (thermal transfer) Construction: Stainless steel Machine number: 2511

Condition: excellent (used), functionality: fully functional, Working width: 900mm Steel calibrating roller Combination unit with a rubber roller Motor power: 11kW Pneumatic shoe adjustment Pneumatic oscillation with a photocell Element thickness gauge Dcodpfszxp Npex Apmop Electric table adjustment Star/Delta start-up Power supply: 380V

Condition: excellent (used), functionality: fully functional, working width 950 mm Dedpfx Apjz D Ackemocp calibrating unit with metal roller combination unit with rubber roller and automatically adjusted sanding pad star-delta start pneumatic oscillation controlled by photocells two feed speeds of the conveyor motor power 7.5 kW year of manufacture 2000 power supply 400V weight 976 kg

Condition: excellent (used), functionality: fully functional, working width 1350 mm, calibration unit with metal roller, combination unit with two rubber rollers and multi-segment pad, oscillation by photocells, machine function activation from control panel, belt blow-off, stepless feed speed regulation for sanding belt on 2nd unit, pneumatically controlled multi-segment pad with adjustment, year of manufacture 2007, electric table adjustment, material thickness gauge, vacuum under-table. Dcjdpfx Apozz Nmmemop

Condition: used, Year of construction: 2021, Overview This Robopac Helix 4 EVO pallet winder was built in 2021, with less than 500 operating hours - technically close to new. The arm carries the pre-stretch carriage around the stationary pallet, so the load itself is never turned - the configuration for unstable, fragile or heavy loads at high output (capacity below). Built as a stand-alone unit. Technical data - Manufacturer: Robopac - Model: Helix 4 EVO - Year of manufacture: 2021 - Machine type: automatic rotating-arm stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: 82 pallets/h (11 wraps, 1,000 mm H), 73 (15 wraps, 1,600 mm H), 64 (19 wraps, 2,000 mm H) - Wrapping cycle time: approx. 36.3 s at H 1,600 mm, 15 wraps (conveyor excluded) - Pallet sizes: 800 x 1,200 mm and 800 x 600 mm; industrial pallets and quarter pallets can be wrapped as well, centred on the conveyor - Load height: 1,000 - 2,000 mm incl. pallet; mechanical max. 2,550 mm incl. pallet and conveyor - Load weight: 100 - 1,200 kg - Conveyor speed: 15 m/min - Machine height: 4,721 mm; hall height from 7,000 mm - Pre-stretch: PGSA carriage, electronically adjustable 100 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. dia. 250 mm, core 76 mm, max. weight 16 kg - Control: Siemens SIMATIC S7-1500 PLC, TP700 7" colour touch panel - Wrapping programs: 15, expandable to 64, 12 control steps per recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry and oil-free - Documentation and HMI languages: German / English / Italian Equipment - Rotating arm on a four-column steel structure, geared slewing ring with central lubrication - Patented PGSA pre-stretch carriage with load cell, film tension corrected at the corners, set from the display - Automatic film clamping, cutting and impulse-sealing unit, spring gripper with 300 mm horizontal stroke - Easy Lock tilting roller and roping device for narrowing the film web from below - Pantograph top press unit for load stabilisation during wrapping - Photocell for automatic pallet-height reading - Integrated roller conveyor, pallets loaded and unloaded by forklift - SEW IP55 geared motors for arm rotation and carriage lift, FESTO pneumatic components - Glazed enclosure with Sick M4000 light curtains, 30 mm resolution, 1,800 mm field height Dodpfx Aozzz Rdepmscp - Enlarged illuminated switch cabinet and a separate, independent operator panel - TPM package: centralised lubrication points, gauges with red/green rings, maintenance intervals on the display - Troubleshooting in the HMI with fault location and remedy - R-Connect remote connectivity with cloud portal for production data and teleservice - Documentation printed and on USB: manual, CE declaration, diagrams, spare parts catalogue, layout Condition Used - virtually new, dismantled and professionally packed for transport; photographs show it assembled before dismantling. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: used, Year of construction: 2010, The solution has been developed for the production of prefabricated exterior wall panels intended for house manufacturers. The system consists of three main components: one rail-mounted nailing bridge and two worktables. Nailing Bridge: The nailing bridge is designed for automated panel nailing using four nail guns interconnected with the corresponding opposite side. The system includes four nailing units which automatically perform nailing operations according to predefined nailing patterns at the respective worktables. The nailing portal is mounted on a floor-installed rail system bolted to the concrete floor, allowing the bridge-type nailing system to move between the two worktables as required. The system is equipped with photocells for positioning and safety control. Function • The rail-mounted frame is positioned in a neutral loading position between the two worktables. • The nailing operation is initiated from either of the two worktables. Djdpfeykqxdjx Apmocp • The selected nailing pattern is executed automatically. • The nailing portal is activated to carry out the nailing process in accordance with the chosen pattern. Worktables: The worktables are designed with support grooves for positioning timber studs. These grooves are adjustable via sliding mechanisms, enabling adaptation to different panel types and configurations. Function • The outer edges of the table are adjusted towards the panel using a manual control. • The selected battens are manually positioned to provide support for accurate panel placement. • The operator positions the components to be assembled into the appropriate grooves and against the battens. • The bridge-mounted nailing system is activated to perform nailing according to the selected pattern.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 578 034 05, Bobst Autoplatine SP 104 ER Year: 2001 Serial Number: 0578 034 05 / 0531 021 05 Automatic die cutter for paper and cardboard converting, processing sheets up to 1,040 x 740 mm at up to 8,000 sheets per hour. The press is fully equipped with a waste stripping station and a blank stack delivery station with automatic non-stop and pallet changing device. Operation is controlled via the Bobst C.U.B.E. control system with an additional panel at the feeder, supported by Bernoulli sheet braking at the stripping and delivery stations. Equipment Machine Platform with safety barrier Centerline system for quick job changeovers Electronic sheet travel control Adjustable centerings at stripping and delivery stations Anti-static stainless steel plate Sheet synchronization with machine stopped 4 front lays, adjustable in pairs, with front register control Pull guide (OS) with side register control Pull guide (OOS) with side register control Double sheet detector Feed belt slow-down device Support plates at platen entry Sheet hold-down device Upper frame with manual lifting device Upper transport for paper, paperboard and corrugated board up to 4 mm 4 laterally guided transport belts Platen Press Gripper reopening device Die cutting without gripper margin Equipment centering and locking Locking of the chase against the upper beam Cutting force measurement with strain gauge Synthetic supporting plate, 22.5 mm Upper chase with quick locking, fixed bottom plate Compensating plate, 4 mm ground steel Adjustable supporting plate centerings, ±0.9 mm Lowering of the chain guides Waste Stripping Station System with 3 pull-out frames 2x upper pull-out frame 2x lower pull-out frame Central quick locking pull-out frame Blank Stack Delivery Station Automatic binder sheet inserter Gripper opening device for full sheet stacks Automatic non-stop device Special non-stop rack for small boxes below 140 mm Pile raising security Waste / skeleton removal apron Braking brush of the waste skeleton Front trim ejection control by photocells 2x upper pull-out frame Lower pull-out frame Pallet changing device with conveyor Technical Details Parameter Value Production Rate 8,000 sheets/hour Max Sheet Size 1,040 x 740 mm Min Sheet Size 400 x 350 mm Djdj Afwrvepfx Apmecp Max Die-Cutting Size (with gripper margin) 1,040 x 725 mm Max Cutting Die Size 1,050 x 746 mm Convertible Stock Paper from 80 g/m², board up to 2,000 g/m², corrugated up to 4 mm Parameter Value Max Platen Pressure 2.5 MN (250 t) Max Pile Height Feeder 1,815 mm (non-stop 1,515 mm), delivery 1,430 mm Max Pallet Size 1,200 x 800 mm Compressed Air min. 6 bar; without central supply, a compressor of 80 m³/h with 500 l tank is required Net Weight 20,000 kg Electricity Main motor 11 kW, total connected load max. 25 kVA still connected to power

Condition: used, Year of construction: 2023, Overview This Robopac Genesis Futura HS pallet winder was built in 2023. It has under 500 operating hours - technically close to new. The rotating ring carries the pre-stretch carriage around the stationary pallet for high throughput without moving the load (see Capacity below). Delivered as a stand-alone unit with integrated roller conveyor, prepared for line integration over Ethernet TCP/IP. Technical data - Manufacturer: Robopac - Model: Genesis Futura HS - Year of manufacture: 2023 - Machine type: automatic rotating-ring stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: up to 92 pallets/h (13 wraps, H 1,000 mm), 77 pallets/h (17 wraps, H 1,600 mm), 70 pallets/h (19 wraps, H 2,000 mm) - Pallet size: 800 x 1,200 mm - Load height: 1,000 - 2,000 mm (incl. pallet) - Load weight: 100 - 1,200 kg - Conveyor height: approx. 550 mm; speed 15 m/min - Machine height: approx. 4,862 mm; hall height from 7,000 mm - Pre-stretch: SCV-B carriage, electronically adjustable 150 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. diameter 250 mm, core 76 mm, max. weight 20 kg - Control: Siemens SIMATIC S7-1200 PLC, Siemens TP700 7" colour touch panel - Wrapping programs: 15 (expandable to 64), 12 steps/recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry, oil-free - Documentation and HMI languages: German / English Equipment - High-speed rotating ring: power transfer to the pre-stretch carriage via sliding contacts, Wi-Fi commands - Integrated roller conveyor with pneumatic pallet lifting station (SMC PL-D) - Automatic film clamping, cutting and wide-band sealing unit - Fixed vertical hold-down (top press unit) stabilises the load during wrapping - Roping device gathers the film web from below - Photocell for automatic pallet-height reading, plus a pre-scan photocell with 3,800 mm reflector mast - Inverter-controlled IE3 motors, SEW geared, IP55, FESTO pneumatic components, SICK photocells - Siemens Scalance S615 VPN / firewall router and Scalance XB005 Ethernet switch, TCP/IP link to up-/downstream machines - Safety: Reer Safegate SMPO 1803 light curtain, fenced enclosure, dynamic fall protection on the ring - Operator panel separate from the main switch cabinet, plus remote control unit with emergency stop Dcedpfx Aozzz R Djpmsp - R-Connect remote monitoring hardware: cloud portal for production data and teleservice - TPM package (centralised lubrication points, maintenance intervals on display), integrated HMI troubleshooting - Complete documentation on USB stick and in print: operating / maintenance manual, wiring / pneumatic diagrams, spare parts catalogue, layout Condition Used - almost as new, no visible production wear. Still installed and under power; inspection in operation on request. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: excellent (used), functionality: fully functional, pressing force: 160 t, table width: 1,600 mm, table height: 2,000 mm, Equipment: documentation/manual, KAEV Hydraulic Cutting System Available Complete KAEV hydraulic cutting system, originally used for die cutting acoustic composites and laminated automotive parts. 1. Hydraulic beam cutting press Four-column press with double-balanced yoke, self-lubricating bushings, column covers and two hydraulic cylinders integrated into the frame. The two-stage hydraulic pump provides fast approach and a slower, high-power cutting stroke. Hydraulic unit capacity: up to 300 litres; oil included. Features include automatic die-finding to set the lowest cutting point and infinitely adjustable return stroke. The control cabinet has a touch-screen panel and OMRON PLC, with scope for extensions and additional equipment. Standard software includes error indication, modem for internet connection, setup/manual/automatic modes and German/English interface. Protective covers and safety photocells are fitted. Technical data: • Cutting force: 160 t / 1,600 kN • Table/beam: 2,000 × 1,600 mm • Table height: approx. 950 mm • Daylight: 200 mm • Adjustable stroke: 15–180 mm • Stroke speed: 51 mm/s • Pump motor: 22 kW or 18 kW • Max. cutting oil pressure: 314 bar • Weight: approx. 16,000 kg 2. Pneumatic clamping beam feeder Rear-mounted feeder with one travelling beam pair for feeding material under the press and one pair for pulling and holding material. Feeding is driven by toothed belts and a frequency-controlled geared motor. The servo-driven pulling beams hold material securely and can reposition it backwards to a programmed position. PLC-controlled electro-pneumatic cabinet. Feed length is set at the touch-screen panel. Material is supported by a belt; the feeding area by a steel plate. Technical data: • Clamping width: 2,000 mm • Max. feed length: 1,600 mm • Beam opening: 60 mm • Beam speed: up to 800 mm/s, adjustable • Feed accuracy: ±1 mm • Pull-off force: 200 kp 3. Cutting pad shuttle unit Dcsdpsz E S Ilefx Apmep The cutting pad moves in sync with material feeding to the front of the press, allowing convenient removal of cut parts. A linear drive and frequency-controlled geared motor move the shuttle frame. An automatic pad-shifting system connected to the cutting block changes the cutting position within a defined area, reducing repeated cuts in the same spot and extending pad life. A horizontal safety light curtain (approx. 1,200 mm) stops movement if the operator enters the shuttle area.

Condition: new, Year of construction: 2024, functionality: fully functional, SEMI-AUTOMATIC TURNTABLE, FOR PALLET WRAPPING WITH STRETCH FILM Power Prestretch Pallet Wrapper from the UK agent for Noxon Djdpfjxwa I Tex Apmjcp Upward-downward carriage speed Top and bottom reinforcement wraps Film tension Table rotation speed Ergonomic carriage stop at the end of the cycle Upward-downward cycle Only upward cycle Manual cycle Self learning cycle Altimeter and photocell delay 6 recordable programs N-Connect: remote wifi connection for machine total control

Condition: used, functionality: fully functional, TORSION BAR PRESS BRAKE, 2500x40T, used, overhauled and updated to standards, OMAG PI 4020. OPERATES ONLY AT SLOW SPEED, FOR STANDARD-COMPLIANT USE WITHOUT PHOTOCELLS. New electrical system, machine overhauled, and UPPER BLADE AND LOWER PRISM WITH 5 GROOVES, GROUND WITH 2 MANUALLY ADJUSTABLE REAR POSITIONERS. Dedpszhknlefx Apmjcp

Condition: used, Year of construction: 2019, Overview Complete 10 hl craft brewery around a BBC INOX Essential 1000 steam-heated two-vessel brewhouse, installed in 2019. One package from milling to bottling: brewhouse, hot liquor, wort cooling, steam and water treatment, fermentation with glycol cooling, filling, labelling and capping, a walk-in cold room for bottle conditioning, plus handling and cleaning equipment. Suited to a new brewery or a brewpub moving up to 10 hl; fermentation capacity can be extended. Technical data - Brew length: 10 hl (1,000 L) per brew - Brewhouse: 2 vessels, AISI 304, steam-heated - Fermentation: 3 x 18 hl gross (approx. 15 hl working), AISI 316, atmospheric - Cellar output: approx. 700-800 hl/year with 3 fermenters on 3-week cycles - Year: 2019 Scope of Delivery - Brewhouse | BBC INOX | ESSENTIAL 1000 | mash/boil kettle 1,600 L, steam-heated, whirlpool inlet; lauter tun 1,300 L with false bottom and rake; AISI 316 wort pump, grant, platform and stairs; control panel with 15 recipes | 2019 Dcjdpfxsz E U Dij Apmjp - Hot liquor tank | 2,000 L | AISI 304, internal steam coil, CIP spray ball, manway, level gauge, pump; approx. H 3,100 x D 1,270 mm - Plate heat exchanger | Kelvion | NT 25 PH | AISI 316 plates, 2,000 L/h, wort 98 to 12.8 °C - Cylindro-conical fermenters, 3 units | BBC INOX | 18 hl | AISI 316, 60° cone, dual-zone glycol jackets, individual temperature controllers, CIP spray ball, sampling valve - Glycol chiller | outdoor monobloc, glycol down to -5 °C, buffer tank and circulation pump - Steam generator | process steam for brewhouse and hot liquor tank - Water softener | ion-exchange column with brine tank - Bottling / priming tank | BBC INOX | AISI 304/316, polished, level gauge - Linear gravity bottle filler | 6 filling spouts, 480 L/h, 33 / 50 / 75 cl, AISI 304 on trolley - Semi-automatic labeller | OMB | front and back label on round bottles, photocell, 230 V | 2019 - Crown capper | AIR-MATIC | pneumatic column capper, 26 / 29 mm crowns - Walk-in cold room | 5.30 x 3.10 x H 2.50 m, dismountable panels, +2 to +10 °C - Malt mill | two hardened-steel rollers, adjustable gap, 25 kg hopper, 1.5 kW - Digital floor scale | stainless steel low-profile platform, tare and dosing - Semi-electric stacker | Jungheinrich | HC 110 | 1,000 kg, lift height 1,600 mm, 12 V, integrated charger | 2019 - Manual hydraulic stacker | BASIC | D 1025 | 1,000 kg, fork lift 85-2,500 mm - Floor scrubber-dryer | Lindhaus | LW 38 PRO - Stainless steel workbench | AISI 304, 200 x 70 x H 85 cm - Wire-mesh storage baskets | foldable, stackable, 112 x 77 x H 95 cm - Food-grade hoses and stock | hoses with DIN fittings; approx. 1,600 empty bottles, 250 cartons, 3 x 20 L kegs, 2,000 crown caps Condition Used, visually very good, clean installation, still installed and under power. The fermenters are atmospheric: carbonation by bottle conditioning or via an additional pressure tank. Chiller, cold room and steam generator must be disconnected by certified technicians. Availability Immediately. Location: Italy. Dismantling and loading by the buyer. The brewhouse, hot liquor tank and heat exchanger are also available as a separate package.

Condition: used, Year of construction: 2023, Coalza Stainless Steel Modular Belt Elevators/Conveyors – Units Used Coalza stainless steel conveyor and elevator units, offered as shown in the pictures. Each unit is equipped with a white modular belt with cleats, an inclined conveying section, a geared motor drive, and transparent protective covers. These conveyors are designed for product transfer and elevation and can be integrated into a packaging or food-processing line. Coalza’s range includes modular belt elevators with profiled belts and horizontal loading and discharge ends, as well as L-type and straight elevating conveyor configurations. Depending on the configuration, the conveyor can be synchronized with a Coalza packaging machine using photocells. Coalza states that its conveyor belts are suitable for transporting food products. Manufacturer: Coalza Stainless steel construction White modular belt with cleats Inclined elevator sections and horizontal conveying sections Geared motor drives Transparent protective covers Dcjdpfxe Agq N He Apmop Coalza conveyor, Coalza elevator conveyor, stainless steel conveyor, modular belt elevator, cleated belt conveyor, inclined conveyor, product elevator, food processing conveyor, food handling conveyor, packaging line conveyor, VFFS packaging line conveyor, product transfer conveyor, industrial belt conveyor, used Coalza conveyor.

Condition: used, Year of construction: 2011, Automatic labeling machine for glass bottles Manufacturer/Model: Makro MAK-1 4P Ua2 L2 Version with 2 self-adhesive labeling units MAK-A50 Suitable for front label and back label Output: up to approx. 3,000–3,500 bottles/hour Container diameter: 40–130 mm, container height: 140–380 mm Label length: 10–195 mm, label height: 10–180 mm Stainless steel version AISI 304, safety enclosure in accordance with CE PLC control with touch-screen display Automatic speed regulation and electric head height adjustment Optical orientation via sensors, plate rotation via stepper motors Dodpfx Apj Ahk Uremscp Installed power: approx. 4 kW Technical data: working direction: left-right, clockwise capacity bph max.: 4500 labels: self adhesive labels number of labelling stations: 2 number of bottle plates: 4 orientation: bottle plate with stepper motor, optical orientation using a photocell bottle diamater max (mm): 130 bottle diamater min (mm): 40 bottle height max (mm): 380 bottle height min (mm): 140 motor height adjustment: yes speed adjusment: frequence converter

Year of construction: 2001, condition: used, functionality: fully functional, Bobst Autoplatine SP 104-ER (2001) Automatic die-cutting machine for paper and cardboard converting, processing sheets up to 1,040 x 740 mm at up to 8,000 sheets per hour. The machine is fully equipped with a waste stripping station and a blank stack delivery station with automatic non-stop operation and a pallet changing device. Operation is controlled via the Bobst C.U.B.E. control system, with an additional panel at the feeder, supported by Bernoulli sheet braking at the stripping and delivery stations. Equipment ### Machine Dcjdpfxo Afv Szj Apmop Platform with safety barrier Centerline system for quick job changeovers Electronic sheet travel control Adjustable centering at stripping and delivery stations Control cabinet cooling unit Gripper bars Bobst C.U.B.E. electronic machine operating system Additional C.U.B.E. control panel at the feeder Bernoulli sheet braking device at the stripping station Bernoulli sheet braking device at the delivery station Motor with frequency converter control ### Feeder Pile tray with handle for lateral adjustment during production Pile height adjustment with front photocell Rear pile guides (OS and OOS) Side blowers adjustable with Centerline marks Suction unit with multiple adjustments Vertical adjustment of the suction head Automatic lateral pile correction Manual non-stop device Synchronization of sheet arrival against the front lays Safety system for lowering the pile tray ### Feed Table Anti-static stainless steel plate Sheet synchronization with machine stopped 4 front lays, adjustable in pairs, with front register control Pull guide (OS) with side register control Pull guide (OOS) with side register control Double sheet detector Feed belt slow-down device Support plates at platen entry Sheet hold-down device Upper frame with manual lifting device Upper transport for paper, paperboard, and corrugated board up to 4 mm 4 laterally guided transport belts ### Platen Press Gripper reopening device Die cutting without gripper margin Equipment centering and locking Locking of the chase against the upper beam Cutting force measurement with strain gauge Synthetic supporting plate, 22.5 mm 3x upper chase with quick locking, fixed bottom plate Compensating plate, 4 mm ground steel Adjustable supporting plate centering, ±0.9 mm Lowering of the chain guides ### Technical Details Production Rate: 8,000 sheets/hour Max Sheet Size: 1,040 x 740 mm Min Sheet Size: 400 x 350 mm Max Die-Cutting Size (with gripper margin): 1,040 x 725 mm Max Cutting Die Size: 1,050 x 746 mm Convertible Stock: Paper from 80 g/m², board up to 2,000 g/m², corrugated up to 4 mm Max Platen Pressure: 2.5 MN (250 t) Max Pile Height: Feeder 1,815 mm (non-stop 1,515 mm), delivery 1,430 mm Max Pallet Size: 1,200 x 800 mm ### Net Weight 20,000 kg ### Electricity Main motor 11 kW, total connected load max. 25 kVA ### Note The buyer is responsible for disassembly; no tools are provided. Still connected to power.

Condition: used, Year of construction: 2019, machine/vehicle number: LC681, Used complete 10hl craft brewery lineTechnical Specifications & Performance DataThis complete 10 hl craft brewery and bottling line is built around a BBC INOX Essential 1000 steam-heated, two-vessel brewhouse. Designed for bottle-conditioned beer production, the plant combines brewing, fermentation, glycol cooling, gravity filling, labeling, crown capping, cold storage, cleaning and handling equipment in one integrated industrial packaging installation.Brew length: 10 hl / 1,000 L per brewBrewhouse: BBC INOX Essential 1000, two vessels, AISI 304 stainless steel, steam heatedHot liquor tank: 2,000 L AISI 304 tank with internal steam coilFermentation: 3 x 18 hl gross-volume cylindro-conical fermenters, approximately 15 hl working volume eachFilling system: six-head linear gravity bottle filler, 480 L/hBottle formats: compatible with 0.33L, 0.5L and 0.75L bottlesWort cooling: Kelvion plate heat exchanger, 2,000 L/hCellar output: approximately 700–800 hl/year with the installed fermentation capacityAdvanced Automation & Control SystemsThe brewhouse is equipped with a digital control panel featuring recipe programming, with capacity for 15 stored recipes, brewing-temperature display and control, and management of the wort pump and lauter rake. Individual temperature controllers on the fermenters support controlled glycol cooling across cone and shell zones.The semi-automatic OMB labeling machine uses an electric drive, label photocell and micrometric adjustments for accurate front and back label application on round bottles. The bottling section includes quick couplings and supply hoses, while the pneumatic AIR-MATIC crown capper requires compressed air for operation.Power supply: 380–400 V, three-phaseOMB labeling machine: 230 VMalt mill motor: 1.5 kWGlycol operation down to -5 °CProduction Line Integration CapabilitiesThis used bottling line forms part of a complete brewing and beverage production plant. The process moves from malt milling and wort production through cooling and fermentation, followed by priming, gravity filling, labeling, crown capping and cold-room bottle conditioning. It is suited to craft beer operations requiring a compact, coordinated production line with packaging machinery for glass bottles.Machine typeManufacturer / modelYearVarious EquipmentBBC INOX Essential 1000 Brewhouse2019ChillerMonobloc glycol chillerFilling MachineLinear gravity bottle filler... Dcodpfx Ajz E Dfcspmjp

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 4514927-4514928, Printed manuals are available both for the SLAU 80-60 shrink wrapper and the TR 65-150 shrink tunnel. Automatic “L” sealer packaging machine, brand ULMA, model SLAU, equipped with a shrink tunnel, designed for packaging all types of products using either shrink film or non-shrink film, reaching outputs of up to 45 cycles/min. Highly versatile machine: its simple adjustment systems allow for rapid adaptation to different products to be packaged. Produces seamless packages on both the top and bottom of the product, ensuring high product visibility, whether shrink wrapping is applied or not. The SLAU was specifically designed to facilitate frequent size/format changes, and therefore features systems that enable all changes to be carried out easily and quickly, with no need for additional tools. Automatic in-line feeding via conveyor belt, featuring product separation and alignment, as well as manual belt width adjustment. Motorized 90° film reel holder, with mechanical perforation system and end-of-film detection. Manually adjustable former triangle height. Horizontal and vertical photocells for product detection. Three film sealing and cutting options: STD: by nichrome wire, OPC: knife or hot bar for PE films. The latter two feature electronic temperature control. Jaw opening adjustment by pneumatic actuator in three positions, increasing output with low-profile products. Sealing die equipped with safety end-pieces to prevent products from getting stuck should obstacles be encountered along the path. Belt closure system facilitates the transfer of small and/or unstable products. Sealing center alignment via jaw height adjustment. Easy-access automatic film waste rewinder with film break detector. Function and parameter control and adjustment via programmable PC. Sturdy frame built from painted welded steel tubing. Fitted with wheels and adjustable feet for transport and positioning. Right-to-left machine version. Easy integration into existing production lines. Full accessibility to all components. Ventilated electrical cabinet. Guards and safety systems compliant with CE regulations. Available in both painted and stainless steel versions. --- ULMA TR 65-150 hot air tunnel, designed for film shrink-wrapping of products discharged from side-seal wrappers, bundlers, flow packers, overlap, and other types of packaging machines. High thermal efficiency tunnel, low consumption, and minimal heat loss. Robust frame built from painted rolled steel. Easily integrated into existing production lines. Fitted with wheels and adjustable-height feet. Dodpoykqhfsfx Apmscp Right-to-left working direction. Electronic adjustment of temperature and conveyor speed. Homogeneous distribution system of hot air flow inside the chamber to ensure significant energy savings. Maximum insulation minimizes heat loss.

Condition: used, Year of construction: 2016, Overview This Haloila Octopus Compact is an automatic rotary-ring stretch wrapper for palletised loads, built in 2016 by Oy M. Haloila Ab in the inline version. It is sold together with its pallet roller conveyor with pallet lifter and its control cabinet. The machine was specified for wrapping barrels and canisters on pallets, is in very good condition and fully functional, and has been out of production since July 2024. It is still installed and under power and can be inspected on site. The rotating ring carries the film carriage around the stationary pallet, so the load itself is never turned - a compact layout suited to lines where the pallet runs straight through the winder on the conveyor. Technical data - Manufacturer: Haloila - Model: Octopus Compact, inline version - Year of manufacture: 2016 - Machine type: automatic rotary-ring pallet stretch wrapper (pallet winder) - Designed output: 32 pallets per hour (reference pallet height 1,200 mm, 14 wraps per pallet, double wrapping) - Pallet formats: 1,000 x 1,200 mm, Euro 800 x 1,200 mm and special 1,200 x 1,200 mm - Load: up to 1,200 x 1,200 mm, height 500 to 1,200 mm, up to 1,000 kg Dodpfxez R Sxdj Apmjcp - Conveyor: roller conveyor, height 390 mm, speed 15 m/min, effective width 1,285 mm, roller pitch 166 mm, Movimot geared motors - Film carriage: AC-powered, pre-stretch up to 230 % - Film seaming: heat-seal pad - Power supply: 3 x 400 V, 50 Hz + N + PE - Connected load: 4 kW - Rated current: 10 A - CE mark on the machine plate Equipment - Rotating ring with film carriage and film pre-stretch unit - Roping device - Pallet roller conveyor through the winder, with chain transfer section and pneumatic pallet lifter with sensors - Photoelectric sensors for pallet and load height detection, photocells for load position - Control cabinet and touchscreen operator panel (German), signal tower - Signal exchange interface (DP/DP coupler) for connection to a line control - Safety fencing around the wrapping zone, safety light curtains at infeed and outfeed with muting - Restart push-buttons at the infeed Condition Used, very good condition and fully functional. Out of production since July 2024. Sold without warranty. Availability Available immediately. The machine is still installed: dismantling and loading are to be arranged by the buyer. The matching oil filling line from the same site can also be offered on request. Location: Germany.

Condition: excellent (used), Working width: 110 cm First unit: steel roller Second unit: combination – rubber roller plus pad Pneumatic belt cleaning Pneumatic oscillation with photocells Electric table height adjustment (up/down) Pneumatic belt tensioning Two feed speeds Abrasive belt size: 2200 x 1130 mm Dcsdpfszxzkfex Apmop Voltage: 400 V Motor: 12 kW Weight: 1542 kg Year of manufacture: 2004