Used Barcode for sale (262)

Condition: ready for operation (used), functionality: fully functional, A good used barcode verification system featuring twin belt drive with speed control - system was used for automatic labelling of the underside of boxes/cartons on a production line (label applicator was removed and sold) - barcode scanner is integrated to detect the presence of the label (which contained a barcode) and if no label detected the system alarms and stops - barcode scanning can be disabled if not required - setup currently for EAN 13 Barcodes and has Teach facility built in for new barcode or changeover Conveyor could also be used for Ink Jet Printing of underside of packs Could be refitted with your own label applicator also - mounting boss still in place for original Pago Applicator Single phase 240Volt AC supply Hodpfx Aowufb Ajndenu Ready to ship worldwide

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, cutting width (max.): 530 mm, cutting length (max.): 750 mm, total width: 2,000 mm, input current: 32 A, total height: 2,400 mm, working width: 510 mm, total length: 6,100 mm, input voltage: 400 V, space requirement height: 3,000 mm, space requirement length: 7,500 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, MOTIONCUTTER® 530 – Fully Loaded 450W Digital Laser Finishing System Installed December 2024 | Only 260 Operating Hours | As-New Condition Available immediately in the UK. This is a fully equipped MOTIONCUTTER® 530 high-speed digital laser system with Automation Suite, Position Sensor, Waste Separation and Shingling Belt — essentially the complete production configuration originally supplied fully installed and trained at approx. €317,000 Installed December 2024. Only 260 total operating hours since new. This machine is barely run-in. What You’re Getting Core Machine 450W CO₂ sealed-off laser (600W guaranteed output) 510 x 510 mm working area Up to 18,000 mm/s deflection speed ±0.2 mm dynamic tolerance 20,000 hour expected laser lifetime Mistral 530 pile feeder 80–500 gsm Sheet size up to 530 x 750 mm (extendable to 1000 mm) Conveyor System Patented metal mesh belt 0–45 m/min speed Integrated cleaning station Fully Loaded Options Included ✅ Automation Suite Barcode job recognition Automated job handling Workflow XML integration 100% production control on every sheet ✅ Position Sensor On-the-fly X/Y correction to printed mark Critical for precision packaging alignment Hnedpfx Anoyk Ip Tedeu ✅ Manual Waste Separation Mechanical stripping of finished product from waste ✅ Shingling Belt High-capacity delivery system Software-controlled separation of jobs This is the configuration serious packaging converters buy. Capabilities Cut | Filigree Cut | Kiss Cut Crease | Micro Perforate | Engrave Variable Data Finishing NAMECUT® Personalisation from CSV All in one pass. No tooling. No dies. Ideal For Folding carton short runs Cartonboard packaging Personalised packaging Luxury packaging prototypes High-value sheet finishing Indigo / sheet-fed digital press finishing If you’re currently outsourcing die-cutting for short runs, this replaces that dependency overnight. Condition Installed December 2024 Only 260 hours total runtime Clean production environment Fully operational Available for inspection & test runs in the UK Reason for sale: strategic production shift. Why This Is Attractive Skip 8–10 week factory lead time Skip installation delays Skip international shipping Get a fully proven, calibrated machine Save significant capital vs buying new Serious enquiries only. Available immediately.

Condition: used, Year of construction: 2009, HERMA provides specialized automated and semi-automated labeling systems designed for boxes, cartons, and packaging lines, built around the HERMA 500 High-Performance Labeler. [[1](/), [2](/)] Key Box and Carton Labeling Solutions Hnedpfx Anez Rvb Iodou - Print & Apply Systems: Integrates a label printer and applicator unit to print variable data (such as shipping labels, barcodes, or tracking info) in real-time right before dispensing onto boxes. - Tamper-Evident Seal Labelers (e.g., HERMA 362E TE): Designed for sealing rectangular, dimensionally stable folding boxes and cartons with L-shaped or C-shaped security labels, achieving speeds up to 200 products per minute. - Top and Bottom Labelers (e.g., HERMA 652C): Compact, space-saving systems equipped with dual HERMA 500 applicators to apply labels simultaneously or sequentially to the top and bottom of packages at speeds up to 250 products per minute. - Two-Side Labelers (Series 362 - E, C, M, and TE variants): Provides accurate side or corner labeling for primary and secondary carton packaging, featuring synchronous centering devices and quick, tool-free format adjustments. Core Features - Modular Architecture: Built with standardized components allowing easy integration of thermal inkjet or thermal transfer printers, vision inspection systems, and automated rejection units. - High Precision & Speed: Powered by the HERMA 500 applicator series for high-cycle rates and stable label positioning. - Connectivity & Control: Features touch-screen operation, PLC/Ethernet interfacing, and automatic line-speed synchronization Type: Labeller for Boxer, top Jars, Bottles, Small Boxes, etc

Year of construction: 2020, condition: used, This listing is for Agilent MagnisDx NGS Prep System The unit is in full working condition and ready for immediate use Hnsdpozw Dv Iofx Andou The Agilent MagnisDx is an automated benchtop system for NGS library preparation and target enrichment. It supports automated workflows using Agilent SureSelect chemistry, with barcode checking, pre-set protocols and integrated workflow automation for reproducible results Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized

Condition: used, Year of construction: 2019, Vitronic Barcode Scanner RA1941 Manufacturer: Vitronic Components: Power Suppla Module PSM-R3.2-115/230-240-23.5-60 LED line scanner 108963, 77005 and 108961 VICAM SSI2 112350 Line Scan CAmera LSC-AF-R4.2-100-var-8K-38.40-TX-TX-60 LED-Illumination LEDI-AF-R8.0-650-23.5-150-var-var-60 VIDU compact 12861 Hedpfx Anek Abl Esdjnu VIPAC Decode Unit Vers. 4.0 122244 Speed sensors and connecting cables. Year of manufacture 2019

Year of construction: 2018, condition: used, This listing is for a Grant Controlled Rate Freezer - CRF-1 The unit is in full working condition and is ready for immediate release Product Overview: The CRF-1 Liquid Nitrogen-Free Controlled Rate Freezer is designed for precision-controlled freezing and cryopreservation of biological samples, such as embryos, stem cells, mammalian cells, spermatozoa, antibodies, tissue sections, and rodent organs. Unlike conventional liquid nitrogen-based freezers, the CRF-1 is liquid nitrogen and cryogen-free, eliminating contamination risks and making it suitable for use in cleanrooms and barrier facilities. It offers superior performance in terms of cell viability post-freezing and poses no fire hazard, unlike alcohol-based systems. The CRF-1 allows for highly accurate, reproducible, and controlled freezing rates, crucial for the cryopreservation of biological samples, ensuring optimal recovery upon thawing. Key Features: Cryogen-Free Design: The CRF-1 is free from liquid nitrogen and alcohol, offering a safer, cleaner alternative to traditional freezing methods. No contamination risk, making it ideal for use in sterile environments. Precise Cooling Control: The cooling rate is accurately controlled, especially for the critical nucleation/seeding phase, which ensures consistent and optimal recovery of cells. Wide Temperature Range: Capable of cooling down to -100°C with straws, offering a broad application range for biological cryopreservation. Simple Operation: The CRF-1 operates with or without a PC, and it can log data via PC software. Cooling profiles are displayed directly and can be customized. High Versatility: Compatible with cryovials, straws, bags, microplates, and Matrix-96-well block plates, allowing for research across multiple areas like stem cell research, transgenic embryos, mammalian cells, and more. Low Operational Costs: The CRF-1 runs at approximately 1% of the cost of liquid nitrogen-based freezing systems. Safety Features: Includes an optional Un-interruptible Power Supply (UPS) for complete cycle continuation in case of power failure. Compact & Quiet: Fits neatly on a bench-top and operates quietly, making it suitable for laboratory settings. Main Applications: Hsdpfxjxv Dz Io Andjnu Transgenic embryos research Stem cell research Clinical and research samples like lymphocytes and tissue cell lines Mammalian cell preservation (e.g., cardiomyocytes, adipose, liver, muscle) Cord blood-derived stem cells Adherent cells and stem cells in microplates Cell suspensions in numbered/barcoded arrays Robotic integration for high-throughput applications Veterinarian IVF applications Technical Specifications: Dimensions (w x d x h): 264 x 367 x 445 mm Weight: 9.8 kg Max Plate Temperature: 30°C Min Plate Temperature: -80°C (standard) or -100°C (dependent on model) Temperature Accuracy: ±0.5°C Temperature Stability: ±0.1°C Temperature Uniformity: ±1.0°C Max Cooling Rate: 10°C/min Max Temperature Stabilization Time: 5 minutes Key Benefits: Accurate and Reproducible Cooling Rates: Ensures controlled freezing rates and precise sample temperature management. Customizable Cooling Profiles: Choose from linear and non-linear profiles, or create your own tailored profile. No Cryogen or Liquid Nitrogen: Ideal for reducing contamination risk and the cost of liquid nitrogen. Low Running Costs: Estimated to cost only 1% of traditional liquid nitrogen-controlled freezing methods. End-of-Cycle Cooling Stability: Maintains a steady -100°...

Condition: used, Year of construction: 2018, Label dispenser Macro SP12 right side RA1956 Manufacturer: Schwinn Model: Macro SP 12 Year of manufacture: 2018 Alignment: right Label passage: up to 115 mm Hnjdpfx Anjk Abm Asdju Label speed: 1-18 m/min Maximum diameter label roll: 300 mm Core diameter 40 mm expandable with adapter Power supply: Euro plug 230/50Hz Integrated control with control parameters, controllable inputs and outputs, fault messages,... Additional equipment: Start triggering external AP 010-500 Vacuum Applicator Module Maintenance - equipment - combination Core adapter AP 031 Prewarning - label supply Mounting frame Control box Warning light, 3-stage

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Trotec SpeedMarker 156Wx Industrial Laser Marking System Brand: Trotec Model: SpeedMarker 156Wx Type: Industrial Laser Marking System Application: Permanent marking, engraving and identification of industrial components Available for sale is a Trotec SpeedMarker 156Wx, a professional industrial laser marking system from Trotec Laser. The SpeedMarker series is designed for high-quality, permanent marking and identification of a wide range of industrial components and products. It is suitable for applications including product identification, serial numbers, barcodes, QR codes, logos, text, part numbers and traceability markings. The SpeedMarker 156Wx is particularly suited to industrial and manufacturing environments where accurate, repeatable and permanent marking is required. Typical Applications: Hsdpfx Asz Hzvhondenu - Industrial component marking - Serial number and part number marking - Barcode and QR code marking - Logo and branding - Product identification - Traceability marking - Metal component marking - Engineering and manufacturing applications - Tool and equipment identification - Permanent asset marking Device was removed from IMA manufacturing line that was never commissioned. Marking system is in "as new" condition. Sold as seen in images.

Condition: used, Year of construction: 2012, Accu-Sort Axiom-X 2L Barcode Scanner RA2283 Manufacturer: Accu-Sort Model: Axiom-X Number of lasers: 2 Hedjr Dwbgspfx Andsnu Maximum scans per second 1120 SPS Voltage: 230V AC (12-30V DC) , 24V output Size L 311 mm x W 354 mm x D 176 mm Weight of scan head 6.6 kg Mounting bracket: 1.9 kg Cable base 0.8 kg Power supply unit 1.1 kg Housing Powder-coated cast aluminum, high-impact plastic, protection class IP54 Operating temperature: 0° to +50° C Storage: -20° to +70° C Relative humidity 10% - 90% non-condensing Laser type Visible laser diode 650 nM (standard) Power consumption < 40 W Optical indicators (LEDs) Status, trigger, read, RX/TX, network, link, read quality (5 LEDs) Barcode types All standard 1D symbologies Connections Dedicated setup connection, optional RJ45 connection for Ethernet Communication Standard On-board EtherNet/IP, Ethernet TCP/IP, Serial RS232, RS422 and 4 programmable I/O relays Communication Optional DeviceNet, Profibus MTBF > 71,949 hours at 30° C Conformity UL, cUL, CE, FCC (Class A), 21CFR1040, IEC-60825-1 Year of manufacture 2012 Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 5-axis CNC machining center as a cantilever table design Working area in X = 4375 mm Working area in Y = 1550 mm Working area in Z = 250 mm with 12 kW milling spindle, liquid-cooled 5-axis spindle Homag Drive 5 C+ max. speed 24,000 rpm with torque support Tool holder HSK F-63 18-position disc tool changer 17 drilling spindles, vertical 2 drilling spindles, horizontal in X 2 drilling spindles, horizontal in Y Notch saw, 90° swiveling with LED light strip as positioning aid with 2 vacuum pumps, each 300 m³/h with special workpiece clamping system for small parts with barcode scanner Hedpez Rrbwefx Andjnu Safety device: bumper with chip conveyor with powerControl PC 85 control system with handheld operating device Software: Homag Woodwop 8.0 WoodScan CollisionControl Space requirement: approx. L x W x H 7650 x 4710 x 2850 mm Availability: approx. July 2027 Location: NRW (North Rhine-Westphalia)

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 327.112, total height: 4,910 mm, total width: 3,270 mm, total length: 1,155 mm, load capacity per storage section: 127 kg, construction height: 4,910 mm, construction width: 3,270 mm, type of input current: three-phase, input voltage: 400 V, empty load weight: 2,972 kg, input frequency: 50 Hz, input current: 7 A, Hänel Rotomat 900 vertical carousel storage system, year 2010, in working order and currently in use. Removed only due to warehouse relocation. Ideal for high-density storage of small parts, jewellery, components, engineering stock, pharmaceuticals, archive items and order-picking applications. Manufacturer: Hänel Model: Rotomat 900 Year: 2010 Specification: 22 carriers Max load per carrier: 127 kg Max total load: 2,794 kg Carrier size: 2,838 mm wide x 416 mm deep Machine dimensions: 4,910 mm high x 3,270 mm wide x 1,155 mm deep Stainless work surface 400V 3-phase supply MP12N-S-TFT control system Ethernet / webserver / barcode interface Hsdpfx Ajyu Rrxsndenu Condition: Machine is powered and can be seen operating Clean, well-kept unit from a jewellery business environment Sold only because of warehouse move Sale terms: Viewing available by appointment Buyer responsible for disconnection, dismantling, loading and transport Further photos / video of operation available on request

Condition: used, functionality: unexamined, Year of construction: 2019, The Dematic line is disassembled and ready for transport. Manufacturing date: 2019/2020. Technical throughput: – Conveyor capacity from the mezzanine to the induction stations – 1,800 cartons per hour – Conveyor capacity from the TTU sorter to VAS and the outbound sorter – 1,560 cartons per hour Loading units: a) Cartons on internal conveyors: – Average weight: 15 kg/carton – Dimensions: 600 x 400 x 400 mm – Weight: from 1 to 30 kg/carton b) Cartons on outbound conveyors: – Dimensions: 800 x 400 x 340 mm – No lid – Lid is applied at the end before shipment – Weight: from 1 to 25 kg/carton – Average weight: 15 kg/carton The line is equipped with two TTU sorters. The TTU sorter is a compact sorter that works perfectly in narrow spaces. The TTU is capable of sorting both plastic bags and cartons. Each sorter consists of 2 infeed areas and 300 discharge locations. The two combined sorters have 4 infeed lines and 600 discharge locations. Cartons on the conveyor are identified and transported to the appropriate zone on the sorter. Sorter equipment: – 32 workstations with 16 screens – 16 screen supports – 20 RF scanners (10 per sorter) – 4 pallet discharge locations – SCS server – 2 Lantech case erectors and Robatech glue applicators – 2 Altek 700 kg scissor lifts, located on the outside of each sorter. Access to the platform is secured by a Troax system – when the lift is activated, access to the loading area is prevented by an electromagnetic lock. Additionally, the platform is enclosed with welded wire mesh. – 2 Fischer platforms – workstation for 12 employees (6 on each side), equipped with Data Logic barcode scanners and a Beckhoff CP3716-1071-0010 monitor. Hedpozxrtksfx Andjnu

Condition: like new (used), Scanner with charging dock and cable Width: 270 mm Height: 120 mm Depth: 245 mm Weight: 2 kg including packaging Hnodpfoy Uvtpox Andeu Condition: Like new

Year of construction: 2012, condition: used, COMPLETE CUP FILLING AND STERILISATION LINE – BABY FOOD 100 g / 200 g – 140 JARS/MIN Manufacturers: Filpack, Mondini, Guelt, Steriflow, Ariès, Jyga Process, Fanuc Type: Line for filling, sealing, sterilising and packaging cups Years: 2003–2016 (main part of the line: 2012–2013) Previous industry: Food and drink – baby food CARACTÉRISTIQUES GÉNÉRALES - Cadence : 140 pots/min - Formats : 100 g et 200 g - Pots en PP thermoformé, Ø 89,5 mm - Inertage sous vide ou azote à l'operculage - Pasteurisation / stérilisation en autoclaves rotatifs, avec contre-pression - Chargement et déchargement automatique des autoclaves (robots et navette) - Prélèvement automatique d'échantillons - Contrôle caméra par lecture de code-barres, et contrôle pondéral des cartons LINE-UP 1. Dépileur de pots – Mondini – 2012 2. 6-head brushless dosing unit – Filpack – No. 120111 – 10/2012 3. Vacuum/nitrogen-flushed sealing machine – Mondini – No. A/12/A-00464 – October 2012 4. Robot for loading trays and assembling autoclave loads – Guelt – 2013 5. Transfer shuttle for trains to autoclaves – Steriflow – 2012 6. 3 rotary autoclaves, each with 5 baskets – Steriflow – 2012 7. Robot for unloading trains and placing cups onto a conveyor belt – Guelt – 2013 8. Automatic sample collector – Guelt – 2013 9. Autoclave-exit lid applicator – Mondini – No. A/12/A-00464 – 2013 10. Fitting cardboard sleeves onto the jars – Mondini 11. Clustering (grouping of cups) – Ariès – No. 415 038A – 2012 12. Wrap-around cartoning machine – Jyga Process – No. D4303 – 2016 13. M-410iB/160 palletising robot (type A05B-1041-B201) – Fanuc – No. R03Z46888 – December 2003 DOSING – FILPACK - 6 dispensing heads, brushless motor - Products with or without chunks SEALING – MONDINI - Vacuum or nitrogen purging - 2 sealing tools (1 in use, 1 spare) - Lid: 65 mm print area STÉRILISATION – STERIFLOW - 3 rotary autoclaves - 5 baskets per autoclave, i.e. 4,320 jars per autoclave - 1 load = 5 baskets; 1 basket = 1 base tray, 11 trays and 1 lid - 1 tray = 144 jars; 1 stack = 6 trays - Tray stock: 24 base trays, 21 lids, 228 trays, i.e. 4 complete sets plus enough to start a 5th set ÉCHANTILLONNAGE – GUELT - 1 cup sampled for every 432 jars PACKAGING – ARIÈS / JYGA PROCESS / FANUC Hnjdpfxjz S N S Nj Andeu - Clustering into 4 formats: 1 × 1 jar, 1 × 2 jars, 1 × 3 jars, 2 layers × 2 jars - Camera monitoring via barcode scanning - Wrap-around cartoning with carton weighing and ejection of non-compliant cartons (example format: 6 × (4 × 100 g)) - Palletising according to pre-recorded palletising plans COMPATIBLE CUPS (MANUFACTURER’S DRAWINGS: RPC BEBO PLASTIK) 100 g jar – Item 1-89-40-M - External diameter: 89.5 mm - Internal diameter: 81.5 mm - Height: 40 mm - Capacity to the brim: 145 ml 200 g jar – Item 1-89-60-M - External diameter: 89.5 mm - Internal diameter: 81.5 mm - Height: 60 mm - Capacity to the brim: 230 ml DOCUMENTATION AVAILABLE - Line layout diagram - Technical drawings of the 100 g and 200 g jars - Cutting-out templates: lid, 4 × 100 g pack, 6 × (4 × 100 g) wrap

Condition: used, HR 2K inkjet printer barcode labeling RA2309 Printer manufacturer: REA-JET Printer type HR Operation: Control unit with control panel Print type: Inkjet printer interfaces: Eternet Stainless steel control unit in IP65 design Full-color graphic display, diagonal of 14.4 cm (5.7 inches) Graphic user guidance in many languages Support for True Type Fonts (TTF) and Unicode character set Operation: ten-key keypad, cursor block, push and turn operation REA JET HR 2K (with 2 writing heads, up to 25.4 mm writing height) Maximum speed of the system: 762m/min at 60 dpi resolution. 142m/min at 300 dpi. Maximum is 600 dpi. Condition: Worked until dismantling, we have no cartridges available for prior testing. Electrically everything seems to work perfectly (see photos) Abrasion on the rotary encoder (see photo) and USB cover is missing (see foro). Hnsdpfeukxv Nex Andeu Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany

Condition: used, Legi-Air 4040Z with Zebra110pax4 label printer and pneumatic stamp. RA1933 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status indicator and buttons Hnjdpsk Ablljfx Andju Print type: thermal transfer printing or direct thermal printing selectable Interfaces: RS 232 Seriel, IEEE 1284 Print media: standard media, tags and RFID media (reading and coding of RFIF labels) label length min: 12,7mm width print media: 16-114mm ribbon width: 25,4-107mm Ribbon length max: 900m Roll size diameter core: 25,4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) dot size 0,125mm x 0,125mm Print speed: 12 inch/second

Year of construction: 2017, condition: excellent (used), Pipe cutting system with optical laser marking detection The FZH Vario Flex is a fully automated pipe cutting system. It is specifically designed for the precise and reliable cutting of stainless steel pipes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser marking detection. The control panel allows you to choose whether the cut is triggered mechanically (e.g., on the back of a union nut) or fully automatically via the optical detection of a laser marking applied to the pipe. Thanks to the integrated rotating 3-jaw cutting head and a micro-spraying unit (minimum quantity lubrication), the processing is extremely tool-friendly. Hodpfxjzw Ukce Andenu The pipes remain almost completely dry and free of coarse contamination. The entire process, from loading to clamping, cutting, and unloading, is highly automated and carried out in a material-saving cycle. Fully integrated labeling & traceability system: The system is designed for modern quality standards (Industry 4.0 / Automotive). After the cutting process, the barcode label is automatically generated, assigned, and printed for complete part traceability (traceability & system logging directly integrated). Due to two separate box output stations (rear sluices with sliding doors), the system automatically switches to the second station when a box is full. The removal of the finished KLT boxes takes place in parallel with the main operating time without machine downtime. Advantages of the Vario cutting head series compared to conventional cutting methods Shortest changeover times in non-cutting separation Material-saving and free of contaminants Chip-free Easy to maintain No cooling and lubricating agents required Short processing times Cuts all common materials Can be combined with common pipe magazines or from a coil Special designs are possible Technical data & capacities Maximum pipe length (feed): 1,000 mm Material specification: Optimized for stainless steel pipes (also with pre-assembled union nuts or crimped ends) Sensors & positioning: Optical sensors for the automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feed (for manual or automatic loading) Length adjustment: Manually adjustable to different pipe lengths using a mechanical handwheel Cutting method: Chip-removing sawing / Rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant system: Integrated micro-spraying unit (MMS) for minimum quantity lubrication Control: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard and mouse Setup operation: Mobile Siemens Teach-In terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety polycarbonate windows Logistics / output Integrated box placement station 2 separate box output stations for rear removal via protected sluice systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario flex Special features: Pipes with union nuts Diameter Ø 6-76 mm Output length L = 150-1,000 mm Separation based on laser marking Wall thicknesses: 1 to 1.3 mm Condition: The system is in excellent optical and mechanical condition.

Year of construction: 2003, condition: good (used), functionality: fully functional, Highly Automated CNC Pipe Bending Cell: Rosenberger RB20 Hnsdpfx Anozz Hn Isdeu Typical Applications The RB20 series is designed for the cold bending of pipes with one or more bends. It is used in industries such as the automotive industry, furniture manufacturing, and plant engineering, where precise, repetitive bends are required. Technical Features and Function Type: ROSENBERGER RB20 (manufactured in 2003) Performance & Geometry: Servo-electric precision drive with a cold bending capacity of up to Ø 20 x 1.5 mm in steel. High flexibility thanks to freely selectable bending planes within the 78 mm die height and generous 3-axis travel ranges (X/Y/Z: 260 × 146 × 1,170 mm) Control Technology: The logic is managed by a robust Siemens Simatic S7-300 PLC, paired with an industrial operator panel from B&R Robotic Automation: Fully automatic handling (loading/unloading) via an integrated Motoman industrial robot, complete with XRC controller and the corresponding teach-in terminal for path programming. Product removal is carried out reliably via a discharge conveyor belt. Marking system (upgraded in 2021): A modern, high-performance VideoJet 1860 inkjet coder (manufactured in 2021) with microprocessor control enables direct product marking (e.g., lot numbers or barcodes) immediately after the bending process System Safety & Peripherals: CE-compliant safety measures via a SICK safety light curtain and a perimeter safety fence. Optical status indication via R

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 05/22, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 45 mm, workpiece height (max.): 1,200 mm, number of slots in tool magazine: 12, actuation type: electric, Equipment: CE marking, documentation/manual, CNC MACHINING CENTER TOP PROXIMA – 6 SIDES, AUTOMATIC LOADING, DOWEL INSERTION, AND RETURN For sale: CNC machining center TOP PROXIMA, year 2022, designed for the automatic machining of furniture components and panels. Machine in very good condition, well-maintained, and currently installed in a production facility. It allows for drilling, milling, and automatic dowel/hardware insertion operations, with the possibility of machining the part on up to 6 sides. It features two independent work units, one for the main side and one for the back side, reducing handling and intermediate operations. Automatic loading and buffer stock. The machine incorporates an automatic loader that acts as a production buffer. Parts can be identified using a barcode reader/scanner, associating each part with its machining program. It can also be integrated into an automatic line, receiving parts directly from previous processes. Before machining, it incorporates an automatic system for checking and measuring part height. Main functions: Vertical and horizontal drilling. CNC milling. Machining of up to 6 sides. Front machining unit. Rear machining unit. Automatic tool change. Hnsdpfx Ansztkqdsdou Automatic dowel insertion. Dowel insertion on the X-axis. Automatic dowel feeding. The machine has various spindles, electro-spindles, and specific units for drilling, milling, and dowel insertion. Direct output or automatic return Once machined, the part can continue with direct output to the next process or automatically return to the beginning using the conveying system. The return system also incorporates a loader/accumulator, allowing for the storage of machined parts and functioning as an output buffer. The machine can operate independently or be integrated into an automated manufacturing line. Main data: Manufacturer: TOP Model: PROXIMA Year: 2022 Maximum part length: approx. 3,000 mm Processes: drilling, milling, and dowel insertion Machining: up to 6 sides Loading: automatic with storage/buffer Identification: barcode Part control: automatic height measurement Output: direct or automatic return Control: industrial CNC Safety: enclosed installation Condition: Machine in very good overall condition, well-maintained. Operating hours are not available on the control panel. Availability: Availability to be confirmed. The machine is currently installed, and its removal will depend on the implementation of the new production line. Disassembly and loading: Disassembly, loading, and transport are not included. These tasks must be carried out by an external, specialized company at the buyer's expense.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: serie nr 3149, overall weight: 11,800 kg, total width: 6,615 mm, total length: 8,890 mm, total height: 2,050 mm, spindle diameter: 50 mm, type of input current: three-phase, space requirement length: 16,000 mm, space requirement width: 8,000 mm, milling spindle length: 650 mm, compressed air connection: 8 bar, spindle speed (min.): 3,500 rpm, spindle speed (max.): 3,500 rpm, length stop: 3,450 mm, input voltage: 125 V, power: 65 kW (88.38 HP), main saw diameter: 450 mm, corner unit for window and door frames, including tools. controlled from the office (Groeneveld). interpolation (angled pins). barcode laser. return transport. documentation available. complete sets of spare blades/saws, including router bits, linked to Groeneveld. automatic counter-piece. maximum workpiece length 6000. sticker printer for barcode. automatic waxelite pump. automatic central lubrication. connections for pin holes and counter-molds. automatic length stop and rotation for workpieces. including extraction pipes with automatic valve. thicknesses from 38 to 150 mm. pin bank: 1x saw blade 40mm. 2x pin shaft 50x650. 2x edge breaker 30x40. router: 1x rounding router 30x40. 3x router bits 50x600. Hnjdpfxjztptqj Andju machine can be picked up here; in conjunction with Bos Machines (dismantling and transport not included in the price). price excludes VAT.

Condition: like new (used), Year of construction: 2023, machine/vehicle number: 320539B, functionality: fully functional, power: 1.7 kW (2.31 HP), type of input current: three-phase, workpiece width (max.): 1,250 mm, workpiece height (max.): 50 mm, number of axes: 3, number of slots in tool magazine: 4, actuation type: electric, total height: 1,890 mm, total length: 2,900 mm, total width: 1,650 mm, overall weight: 1,400 kg, table length: 99,999 mm, table width: 1,300 mm, Equipment: CE marking, We are offering this virtually new Vitap K3 throughfeed machining center, manufactured in 2023. Additional equipment: 20" LCD TFT monitor Industrial PC WSC user interface with Lister, parameter tools, and parametric settings Graphical CAD programming TPA EDI32, basic version USB port Storage of all files Macro programming DXF file import CE compliant Advantages of the machine: Qualitative machine advantages Hnedpfezv U Ncox Andju Technical advantages of the machine: Feed rate: 25 m/min Automatic 4-position tool changer Max. Horizontal tool Ø: 12 mm Max. Vertical tool Ø: 35 mm Motor: 1.7 kW Number of independent vertical axes: 12 // number of independent horizontal axes on the X-axis: (2+2) Max. Horizontal drilling depth on X and Y axes: 35 mm // max. Vertical drilling depth: 43 mm // number of horizontal drilling spindles on the Y-axis: (2+2) Electrospindle: 5 kW with ISO30 taper (rpm 12000-24000) Max. Workpiece dimensions: Y 1250 mm, Z 50 mm Min. Workpiece dimensions: X 270 mm, Y 150 mm, Z 3 mm Additional information: Axes: 3 controlled axes (X, Y, Z) X-axis: DDT feeding system Y-axis: drilling head movement Z-axis: drilling operations Optional upgrades (at an extra cost): Tool set for production start Tool holder ISO 30 / ER 32 Lubricant cartridges PC with more powerful processor Extra pneumatic top pressure Nesting system Barcode scanner Post-processor for MPR files License for TPA office software Front and rear roller support Narrow part guides Optional clamping opening for 60 mm thickness Options for angular transmission CAD design software for furniture construction *There may be differences between the displayed data and the actual values. *There is no warranty on this machine; the price is an "as is" price. If you have any questions or would like more information, please feel free to send us a message or call us. Available for pickup in Enkhuizen around the beginning of October 2026.

Condition: used, Year of construction: 2015, functionality: fully functional, We are offering for sale an X-BELT SORTING SYSTEM (FLEXSORT SC3) from the manufacturer DEMATIC. GENERAL DESCRIPTION: - The system offered is a Dematic X-Belt FlexSort SC3 sorter, ideal for logistics centers, sorting hubs, e-commerce, retail, and high-throughput operations. - Pre-owned (2015) X-Belt sorter providing precise, fast, and silent sorting thanks to its motorized trays with electromagnetic drive. The equipment has been dismantled from an active site and is available immediately. MAIN FEATURES: Circular sorter: - Up to 12,000 items/hour - Positive sorting on both sides - Maximum sorter speed: 2 m/s - Sorter designed for rapid maintenance (removal in under 5 minutes) - Powered by linear motors - Total footprint: ~2,700 m² Cross-belt trays: - Cross-belt tray size: 800 mm x 450 mm - Minimum item size: 150 × 150 × 5 mm – 0.25 kg - Maximum item size: 600 × 400 × 400 mm – 35 kg - Item discharge left and right CHUTES: - 155 chutes + 1 reject lane - Chute equipment: (Saturation indicator light stacks [1/10 chutes], PTL displays, motorized chutes with automatic diverter + idle rollers, multiple fill level sensors, and a saturation sensor) INDUCTIONS: - 4 hybrid induction stations, total capacity 2,400 items/hour each - Automatic item feeding on belts - 36 PTL sort destinations per induction DWS: - Dimensioning - Automatic barcode reading Hnedpfxjx Sw Rqe Andeu - Dynamic weighing SUPPORTED ITEM TYPES: - Plastic trays - Cartons - Soft parcels (pouches, envelopes, polybags) KEY BENEFITS: - Low energy consumption - Simplified maintenance - WMS / WCS compatibility - Dual-sided sorting (left/right) - >99% sorting accuracy - Quiet operation (

Condition: used, This listing is for Stratec Gemini 6280 Compact Microplate Processor The unit is in full working condition and ready for immediate use The Stratec Gemini 6280 is a fully automated microplate processor optimized for low to mid-throughput ELISA assays. It seamlessly integrates sample pipetting, incubation, washing, and photometric reading into a space-saving, walk-away platform. Equipped with barcode tracking and intuitive software, it ensures exceptional process safety and reproducible results for clinical and research laboratories Hjdpfjzavi Tex Andjnu Transparency Report and Technical Audit: • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform full diagnostic assay validation • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original)

Condition: used, Year of construction: 2021, controller model: , _____ Description: Year of manuf. : 2021 TruBend Center 5030 :- Robust machine frame : - Angular direct drive :- Crowning system :- Machine control with touchscreen operation :- TecZone Fold programming – floating licence :- 2-axis part manipulator with suction modules :- 5-axis backgauge :- Optical angle assistant :- ToolMaster :- Hold-down tools :- OBW90 and UBW90 bending tools Hnsdpfxoz Sw Nis Andsu Technical specifications Minimum bending depth (standard tool):145 mm Minimum bending depth (with additional hold-down tool):40 mm Maximum bending length:3,123 mm Minimum bending length:80 mm Hold-down force:101 t Maximum box height:220 mm Minimum material thickness:0.4 mm Maximum steel material thickness:3 mm Maximum stainless steel material thickness:2.2 mm Maximum aluminium material thickness:4 mm Rapid traverse Y-axis (press beam):250 mm/s 5-axis backgauge:1,700 mm/s ToolMaster Bend:2,400 mm/s Dimensions and weight:6,500 x 3,150 x 2,995 mm / 26,000 kg Features :- ACB Laser :- DMC Bluetooth 2D barcode scanner :- Set of 3-surface suction modules (12 pieces) :- Support brackets (2 pieces) :- Additional hold-down tool function (ENW) :- Additional bending tool function (ZBW) :- ENW110-50 – Length 3,123 mm :- ZBW400 – Length 940 mm

Condition: used, Year of construction: 2019, Vertical packaging machine (VFFS) with servo drives and Videojet printer This Wolf VPC 250 is a vertical form-fill-seal machine built in 2019 by Wolf Verpackungsmaschinen. It forms bags from reel-fed film, fills and seals them, and can be combined with multihead weighers, linear weighers, auger fillers and other dosing systems. According to the specifications for the VPC 250 series, it makes bags of approx. 50 to 250 mm wide and 80 to 450 mm long, from film up to approx. 600 mm wide, with a fill volume of up to approx. 6 litres. What is achievable depends on the installed forming set, the product and the film. The machine has a Siemens SIMATIC touchscreen with PackML control, SEW drives and servo-controlled functions, dual vacuum-assisted film pull belts, a photocell for printed film and an integrated knife. The front and rear cross seals and the vertical seal each have their own temperature control. An integrated Videojet DataFlex 6320 thermal transfer printer prints dates, batch numbers and barcodes directly onto the film. Spare film pull belts and parts are available with the machine. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Vertical form-fill-seal machine (VFFS) Bag width: approx. 50–250 mm Bag length: approx. 80–450 mm Max. film width: approx. 600 mm Max. fill volume: up to approx. 6 litres Hodpfx Ansz I Inasdjnu Controls: Siemens SIMATIC touchscreen, PackML Drives: SEW, servo-controlled Printer: Videojet DataFlex 6320 (thermal transfer) Construction: Stainless steel Machine number: 2511