Used Pig Scales for sale (2,229)

Condition: ready for operation (used), throat depth: 1,100 mm, Heavy duty double column bandsaw sawing cap: dia 1100 mm autofeed with stroke of 500 mm (with unlimited repositioning) enlarged height of sawblade: 67 mm Dedpfxjxpggaj Adaecp chipconveyor equipped with fully motorized Weisshaupt rollerconveyors: - 6 meter in-feed rollerconveyor (outside) with 1 manual clamp for aligning workpiece - 3 meter in-feed rollerconveyor (inside) with 2 manual clamps for aligning workpiece - max workpiece width: 1100 mm - each roll is motorized - cap of one roll is 4 ton - 2 meter out-feed rollerconveyor - one rollerconveyor is equipped with scales to weigh workpiece after cutting (Sartorius system) Max height of workpiece: 1100 mm Length of band saw: 11400 x 67 x 1,6 mm

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Weiler Primus VC Precision Centre Lathe 3-axis Digital Readout K&C NEW with VC Drive, Stepless Speed Adjustment, and CE Compliance, Very Good Condition Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore: 40 mm Dodpfx Ajw Idllodajcp >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread types: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis Digital Readout K&C NEW >> Collet chuck system with collets from 3 to 26 mm, new, 1 mm increments, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 toolholders >> Electric chip guard >> Machine feet >> Splash guard About the Machine: This offer is for a Weiler Primus VC lead and feed screw lathe, built in 2003 and in very good original condition. A very nice lathe with VC drive and stepless spindle speed control. The digital readout and scales from K&C are new. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. The K&C digital readout makes operation even easier and more precise. Take the opportunity to inspect this machine under power on site and be convinced of its condition.

Condition: like new (used), Year of construction: 2022, operating hours: 10 h, functionality: fully functional, turning diameter over cross slide: 430 mm, spindle bore: 80 mm, turning length: 1,500 mm, turning diameter: 430 mm, quill stroke: 150 mm, quill diameter: 70 mm, spindle speed (min.): 3,000 rpm, bed width: 350 mm, total length: 1,900 mm, total width: 1,500 mm, total height: 1,600 mm, spindle motor power: 11 W, overall weight: 3,500 kg, rotational speed (min.): 1 rpm, rotational speed (max.): 3,000 rpm, three-jaw chuck diameter: 250 mm, Equipment: rotational speed infinitely variable, The Seiger SLZ 420K is a conventional lathe known for its robust cast-iron bed, precise slideways, and digital support features. It is well-suited for single-part production, repairs. Dimensions and capacities • Swing over bed: 430 mm • Swing over cross slide: 220 mm • Center distance: 1,500 • Bed width: 350 mm Spindle and drive • Spindle bore diameter: 80 mm • Spindle head: DIN 55027, Size 6 • Spindle diameter in front bearing: 110 mm • Main drive: 11 kW • Speed range: 1–3,000 rpm Tailstock • Quill diameter: 70 mm • Quill stroke: 150 mm • Morse taper: MK 5 Control and features • Display: Heidenhain Positip 8016 digital display • Linear scale: Heidenhain linear scales on the X- and Z-axes • Feed rates: V-constant and controllable feed rates via a potentiometer • Rapid traverse: Functionality in both the X- and Z-axes • Handwheels: Mechanical handwheels for manual operation • Bed: High-quality, torsion-resistant cast-iron bed with hardened and precision-ground slideways The Heidenhain Positip 8016 is a digital measuring instrument with a touchscreen, suitable for manually operated milling, drilling, and turning machines. The display offers various functions to increase productivity and accuracy. Key features • Touchscreen operation: The device is equipped with a robust 12.1-inch color TFT touchscreen, which can also be operated while wearing gloves. • Multiple axes: The system can control up to six axes, four of which are standard linear, angular, or coupled axes, and two are optional. Dodpfxexr U E Aj Adascp • Extensive functions: The Positip 8016 includes features such as drilling patterns, tool radius compensation, a cutting data calculator, and the ability to save positions. • Distance-to-zero function: This function helps you move quickly and accurately to the next position by working towards a zero value. • Programmable: Recurring machining steps can be saved as a program, which speeds up the production of small batches. • Interface: The display features interfaces such as Ethernet and USB for importing and exporting data. • Robust design: The device is specially designed for use in workshop environments and has a sturdy aluminum housing with passive cooling.

Condition: ready for operation (used), Year of construction: 2006, Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 18000 rpm Tool taper SK 40 Additional Equipment Tool Magazine: Additional magazine ZM157 Tool Breakage/Measurement: BLUM tool breakage/measurement Measuring Probe: Heidenhain Event Messenger: Available Electrical Heat Compensation: Provided External Blowing Air: Provided / Oil Mist Extraction: Provided / Chip Trolley: 450 liters Rotating Transparent Window: Available Additional Accessories: Manual control module, flange for extraction 1, bed flushing, sealing air for scales, machine license TCS-Soflex This 5-axis HERMLE C30U + RS Automation was manufactured in 2006, offering advanced capabilities for precision machining. Ideal for complex geometries, this vertical machining centre represents a significant asset for enhancing your production efficiency. Consider the opportunity to buy this HERMLE C30U vertical machining centre. Contact us for more information. Dsdpfx Adexn U Ayoascp Application Types Milling

Condition: used, Year of construction: 1995, grinding length 400 mm grinding width 200 mm workpiece height 300 mm table adjustment - longitudinal max. 420 mm table cross movement max. 190 mm distance spindle center to table 90 - 415 mm table speeds 2 - 28 m/min table load max. 150 kg cross feed of table intermittent 3 - 20 mm rapid traverse cross 7 mm/min rapid traverse vertical 180 mm/min Dedsxu Ntgopfx Adajcp grinding wheel size ø 225 x 25 x ø 51 mm total power requirement 7 kW weight of the machine ca. 1,5 t dimensions of machine L x W x H 2,20 x 1,46 x 2,10 m Accessories: magnetic plate 400 x 200 mm, grinding wheel with flange, balancing scale, 1 flange separate, 2 grinding wheels separate, DRO on Y-axis, wet grinding attachment

Condition: ready for operation (used), functionality: fully functional, Risco RS 450 Mixer The Risco RS 450 mixer delivers consistent and reproducible mixing for medium-scale food production. Its 450-litre bowl provides ample capacity for handling minced meats, stuffings, protein-based salads, or various preparations requiring different textures. Thanks to its intersecting paddle shafts, the mixing is performed gradually, ensuring homogeneous incorporation of ingredients while preserving the product’s structure. As a result, each batch maintains the same appearance, density, and quality, which facilitates recipe standardisation. The automatic front discharge improves workplace ergonomics, enabling direct product transfer into a trolley, screw conveyor, or emulsifier. This setup reduces manual handling, limits product loss, and shortens the interval between mixing and the next processing stage. Furthermore, the variable paddle speed allows precise adjustment of mixing intensity, making the machine suitable for both delicate mixes and denser preparations. Additionally, the option to integrate a vertical loader further boosts line autonomy and simplifies raw material loading. Microprocessor control enables up to ten programs to be stored, ensuring reliable process repeatability. Operators can instantly retrieve the optimal parameters for each recipe without complicated adjustments. The polished stainless steel construction ensures outstanding hygiene and long-term durability, even with frequent washdowns. Finally, compatibility with vacuum or CO₂ injection systems allows further improvement of absorption, texture, and product shelf life. The Risco RS 450 is thus a reliable, versatile machine, perfectly suited for organised and stable production environments. Technical specifications: Bowl capacity: 450 L (approx. 300–350 kg depending on product) Mixing system: Dual-shaft with intersecting paddles, variable speed Discharge: Automatic front discharge, large opening Loading compatibility: 100 L / 200 L trolleys (DIN 9797) Processing options: Vacuum 50–95% + CO₂/N₂ injection (depending on version) Dcedsxr Dfxjpfx Adaop Installed power: 4 kW (mixing motor) Approximate dimensions: approx. 1,750 × 1,250 × 1,550 mm Machine weight: approx. 480–600 kg, depending on configuration Construction: Polished AISI 304 stainless steel, hygienic rounded bowl design

Condition: ready for operation (used), total height: 3,340 mm, total length: 4,500 mm, total width: 1,950 mm, throat depth: 660 mm, Type: ONL 660x700 ACN Heavy duty double column bandsaw specific for high-alloy steels CNC touch control with saw parameters for various types of high-alloy steels cap round: dia 660 mm cap square: 660 x 700 mm bundle cap: 555 x 700 mm autofeed with stroke of 500 mm (with unlimited repositioning) sawing power: 18,5 kW the in-feed and sawing speeds are frecquency controlled enlarged height of sawblade: 67 mm chipconveyor equipped with fully motorized Weisshaupt rollerconveyors: - 10,3 meter in-feed rollerconveyor (outside) with 2 hydraulic clamps for aligning workpiece - 9 meter in-feed rollerconveyor (inside) with 2 hydraulic clamps for aligning workpiece - max workpiece width: 900 mm - each roll is motorized - cap of one roll is 4 ton - 4 meter out-feed rollerconveyor: one rollerconveyor is equipped with scales to weigh workpiece after cutting (Sartorius system) Max height of workpiece: 700 mm Sawspeed: 10 > 120 m/min Dedexpgggepfx Adaocp Length of band saw: 8660 x 67 x 1,6 mm Power needed: 27 kW (58 amp) Weight: 8,5 ton (only machine)

Condition: used, capacity 5 t condition gut amount 1 auf Lager +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Djdpekyzbhefx Adaocp

Condition: new, functionality: fully functional, Year of construction: 2022, operating hours: 37 h, axle configuration: 4x4, load capacity: 230 kg, mast type: telescopic, lifting height: 20,000 mm, lifting power: 230 kg/m, platform length: 1,200 mm, platform width: 920 mm, overall weight: 10,000 kg, fuel type: diesel, tire condition: 100 %, color: red, Equipment: UVV, all wheel drive, === KEY SPECIFICATIONS === Year: 2022 Operating hours: 37 h Max. platform capacity: 230 kg Boom type: Articulated Jib: Telescopic Rotation: Continuous (360°, option available) Platform rotation: Yes (180°) Platform size (L × W): 120 × 92 cm Tailswing: 8.00 m Tyres: Foam-filled Power supply: Diesel Max. working height: 20.00 m Max. outreach: 12.00 m Weight: 10,000 kg CE certification: Yes Dcjdpfx Asxct Udedasp Remote control: No === HIGHLIGHTS === Carefully selected from trusted sources with verifiable history CE certified with full documentation Ready for immediate use and transport Ideal for construction and maintenance applications indoors and outdoors === CONDITION === Excellent working condition — fully checked, maintained, and tested by professionals. Available for inspection on request. === LOCATION & DELIVERY === Located in Sittard, the Netherlands Worldwide delivery possible Price on request (EXW / excluding VAT) Reliable first-owner machine with complete service history and CE certification. 20 m working height and 12 m outreach make it ideal for large-scale projects and precise positioning. Professionally maintained and ready for immediate operation. === DELIVERY === Crane loading available on request for hassle-free handling at departure. Flexible dispatch options tailored to your destination and logistics preferences. All shipping handled professionally by the Collé Rental & Sales logistics team.

Condition: excellent (used), Year of construction: 2006, Ref:11009 . 2006 Schneider Senator 115H-CT 115cm guillotine in excellent condition Comprising: Stainless steel side tables left & right with air Stainless steel central air bed Colour display with graphic operator guidance Soft keypad programming with static back gauge Computer programme with 99 programmes, 999 cuts instructions Metric/Imperial measurement scale Motorised back gauge / fast and slow speed with micro-adjustment Variable pressure hydraulic clamp Optical cut-line indicator Overload protection circuit 10 beam light barrier with FFM guarding Djdpfxjxcymts Adaocp 2 knives Tools and manuals. Specification: Cutting width, Max: 115cm Clamp opening, Max: 170 cm Feed depth, Max: 115cm

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: CYBELEC, controller model: CYBTOUCH 15 2D, working width: 3,100 mm, throat depth: 450 mm, number of axes: 4, type of crowning: CNC-controlled, overall weight: 7,600 kg, total length: 4,360 mm, total width: 2,760 mm, total height: 1,745 mm, power: 11 kW (14.96 HP), input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, COMFORT PLUS 135T 3m Hydraulic Press Brake: Capacity: 135T Bending length: 3100 mm Distance between uprights: 2600 mm Stroke: 265 mm Throat depth: 450 mm Maximum opening: 470 mm Table height: 925 mm Approach speed: 190 mm/s Return speed: 140 mm/s Working speed: 10 mm/s Machine dimensions: 4360 x 1745 x 2760 mm Weight: 7600 kg Motor power: 11 kW Standard features: - 4-axis motorized backgauge (Y1, Y2, X, R) for precise and fast positioning - Cybelec CYBTTOUCH 15 2D CNC controller - Monoblock welded steel frame for enhanced rigidity and durability - Promecam-type quick-release clamping system for fast tool changes - High-precision linear scales for perfect bending results every time - Front and rear laser safety system by FIESSLER AKAS for maximum safety - Integrated standard tooling ready for use: 85° punch and Multi-V die along the full length - LED lighting for optimal visual comfort - Premium European hydraulic components by Höerbiger - Motorized crowning to ensure uniform bending along the entire length - Front sheet supports: 2 units Optional features: - High-precision hydraulic crowning - Pneumatic or hydraulic tool clamping systems (compatible with existing tooling) Dodpfx Ajxukbrjdaecp - Motorized bending supports for easy handling of long or heavy parts - Extended backgauge for large workpieces - Backgauge configurable up to 6 or 8 axes for increased flexibility - Wide lower table suitable for Multi-V tools - Additional backgauge fingers - Offline programming interface for preparing bend sequences from a PC - Full automation/robotic solutions for bending operations to maximize productivity The machine is available for viewing and testing by appointment at our Bréal-sous-Montfort (35) premises. We can also provide demonstration videos or arrange a live video presentation to showcase the machine in operation. Please do not hesitate to contact us for further information. Price on request. Delivery, unloading, and commissioning available upon request.

Condition: ready for operation (used), functionality: fully functional, Risco RS 450 Mixer The Risco RS 450 mixer delivers consistent and reproducible mixing for medium-scale food production. Its 450-litre bowl provides ample capacity for handling minced meats, stuffings, protein-based salads, or various preparations requiring different textures. Thanks to its intersecting paddle shafts, the mixing is performed gradually, ensuring homogeneous incorporation of ingredients while preserving the product’s structure. As a result, each batch maintains the same appearance, density, and quality, which facilitates recipe standardisation. The automatic front discharge improves workplace ergonomics, enabling direct product transfer into a trolley, screw conveyor, or emulsifier. This setup reduces manual handling, limits product loss, and shortens the interval between mixing and the next processing stage. Furthermore, the variable paddle speed allows precise adjustment of mixing intensity, making the machine suitable for both delicate mixes and denser preparations. Additionally, the option to integrate a vertical loader further boosts line autonomy and simplifies raw material loading. Dcedoxr A H Uopfx Adasp Microprocessor control enables up to ten programs to be stored, ensuring reliable process repeatability. Operators can instantly retrieve the optimal parameters for each recipe without complicated adjustments. The polished stainless steel construction ensures outstanding hygiene and long-term durability, even with frequent washdowns. Finally, compatibility with vacuum or CO₂ injection systems allows further improvement of absorption, texture, and product shelf life. The Risco RS 450 is thus a reliable, versatile machine, perfectly suited for organised and stable production environments. Technical specifications: Bowl capacity: 450 L (approx. 300–350 kg depending on product) Mixing system: Dual-shaft with intersecting paddles, variable speed Discharge: Automatic front discharge, large opening Loading compatibility: 100 L / 200 L trolleys (DIN 9797) Processing options: Vacuum 50–95% + CO₂/N₂ injection (depending on version) Installed power: 4 kW (mixing motor) Approximate dimensions: approx. 1,750 × 1,250 × 1,550 mm Machine weight: approx. 480–600 kg, depending on configuration Construction: Polished AISI 304 stainless steel, hygienic rounded bowl design

Condition: ready for operation (used), Key Specifications – MBP 14‑Head C2T Series: MBP C2 (stainless steel, central-feed, food-grade) Number of Weigh Heads: 14 Weigh Height/Capacity: Up to 5,000 g per weighment Operating Speed: Up to ~180 weighments per minute Bucket Type: Smooth stainless-steel buckets – ideal for reducing product stickiness Drive & Controls: Djdpfxewqq Nkj Adajcp Stainless-steel construction for all product contact parts Step-motor‑controlled bucket gates ensure precise portion release Windows‑based multimedia control system with remote access/diagnostics Electrical Requirements: 230 V, 1‑phase, 60 Hz, 10 A

Condition: used, Microbalance, Laboratory Balance, Precision Balance, Analytical Balance, Scale, Micro Balance METTLER TOLEDO Model XS3DU S/N 1129453969 Part No. 18.11.2.1518.756-1 Year of Manufacture: 2008 Functions: Weighing, Statistics, Formulation, Density, Percentage Weighing, Piece Counting Maximum Capacity: 3.1 g Readability: 0.01 mg Taring Range: 0 … 3.1 g Maximum Capacity (Fine Range): 800 mg Readability (Fine Range): 0.001 mg Repeatability (at nominal load): 6 μg (3 g) Repeatability (fine range at nominal load): 0.8 μg (0.2 g) Linearity Deviation: 10 μg (0.5 g) Corner Load Deviation (test load): 4 μg (1 g) Sensitivity Deviation (test weight): 45 μg (3 g) Dsdpfjwrtbxjx Adascp Temperature Drift of Sensitivity: 0.0001 %/°C Sensitivity Stability: 0.0001 %/a Repeatability (low load): 3 μg (0.2 g) Repeatability, fine range (low load): 0.5 μg (0.2 g) Linearity Deviation: 3 μg (3 g) Corner Load Deviation (test load): 1.2 μg Sensitivity Deviation (test weight): 9 μg (3 g) Minimum Sample Weight (USP): 6 mg Minimum Sample Weight (USP) fine range: 1 mg Minimum Sample Weight (U = 1%, k = 2): 0.6 mg Minimum Sample Weight (U = 1%, k = 2) fine range: 0.1 mg Stabilization Time: 6 s Stabilization Time (fine range): 10 s Interface Update Rate: 23 1/s Draft Shield Diameter: 68 mm Draft Shield Usable Height: 55 mm Weigh Pan Diameter: 25 mm - LCD Touchscreen - RS232C Interface - Printer Type RS-P42 - Tare Function Power Supply: Primary 100 – 240 V AC, 50/60 Hz; Secondary 12 V DC, 2.5 A Terminal/Display Unit Dimensions (L x W x H): 285 x 195 x 80 mm Weighing Cell Dimensions (L x W x H): 288 x 128 x 114 mm Printer Dimensions (L x W x H): 210 x 150 x 90 mm Total Weight: approx. 7 kg Good condition

Condition: new, CNC Hydraulic guillotine shear New machine Manufacturer:UMS Type : PRO. 3100 x 13 CNC Technical data: Cutting length 3100 mm sheet thickness (42 kgf/mm) 13 mm sheet thickness (70 kgf/mm) 8 mm cutting angle: 0,5 - 3 mm 15 pcs. blank holder Cybelec Cybtouch 8 monoblock: steel welded construction Automatic cutting gap adjustment Table with ball rollers High quality, hardened and ground upper and lower knives Light sensor for front side (sheet guide) Adjustable cutting stroke 1 m support arm with scale 1 m support arms ( 2 pieces ) Rear light sensor ( 10-16 mm sensor distance) Cutting line illumination Motor 30 kW throat 180 mm Cutting speed 7/13 Original Rexroth valves Rexroth hydraulic system Rexroth pump, original Eckerle Electrical parts from Siemens Operating instructions German Table height 900 mm Dedpjnl D Tfofx Adajcp Overall dimensions 3840x2830x2180 (WxLxH) Total weight 11.000 kg plus commissioning, training and transport Delivery time from order approx. 70 days

Condition: used, mileage: 599,852 km, power: 320 kW (435.08 HP), first registration: 07/2014, overall weight: 26,000 kg, fuel type: diesel, axle configuration: 6x2, maximum load weight: 14,120 kg, empty load weight: 11,880 kg, wheelbase: 4,900 mm, brakes: retarder, driver cabin: sleeper cab, gearing type: other, emission class: euro5, suspension: air/air, loading space volume: 28 m³, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, * German vehicle * 1st hand * Serviced checkbook * Condition see photos * Complete documentation available * 4-chamber special silo with 28m³ * from year of construction 2014 * from premium manufacturer Tropper * Type TN28/ 4AL * With Tropper scale and receipt printer * Superstructure with radio remote control + weight display * External boiler inspection 3-2025 * Internal tank inspection 3-2028 * Tank diameter 2,400 mm * Operating pressure 1 bar * 2 x 4 hose pipe covers with end plates and doors * 8 delivery hoses NW 100 * Filling sliding cover NW 450 * 4 discharge bowls * Conveying system Tropper Airblock * Rotary piston compressor Kaeser * Air volume up to 28m³/h * Access ladder * Pneumatic folding safety railing * Safety walkway * Anti-dust monitoring with remote control * Mobile extraction unit with blower, toolbox and extraction hose * XXL comfort cab * 1 bed * Air conditioning Dcsdpjvhp Emsfx Adasp * Auxiliary heating * Refrigerator * Retarder * Cruise control * Multifunction steering wheel * Bi-xenon headlights * Alcoa alloy wheels * Electric windows * Heated electric mirrors * Air-sprung comfort driver's seat * Heated seats * Electric roof hatch * Trailer coupling * Trailer load 18,000 kg. * Gross towing weight 44,000 kg. * Air suspension + raise/lower * Liftable trailing steering axle * Wheelbase 4.90 m + 1.40 m * GVW 26,000 kg. * GVW. 27,000 kg technically possible * Unladen weight 11,880 kg * Payload 14,120 kg If new TÜV approval is required, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: new, empty load weight: 9,150 kg, maximum load weight: 30,850 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,100 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ABS, air suspension with lifting and lowering, axle load scales, total loading area length approx. 9,100 mm, low bed approx. 6,900 mm long, loading height approx. 890 mm, 24 x lashing eyes each 10 t, 12 x stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing bar on the outside of the ramps and rear slope, loading ramps adjustable to the side, wooden floor 68 mm thick, storage box with lid for lashing chains or tensioning belts, contour marking according to regulations, rotating beacon, spring-loaded parking brake, , including axle load indicators, , vehicle hot-dip galvanized, , --  Misprints, errors and changes excepted, sample pictures --, More data at: !, More Details: ! Dedpfoxupr Njx Adascp

Condition: used, Meat without bone, sausages, cheese or fish. Max. deposit length: 1.000 mm Max. Diameter deposit: (l x w): 320 x 130 mm Max. slice thickness: 0,5 – 25 mm Max. number of slices per minute: max. 2.640 Min. product temperature: - 4°C overall dimensions (l x w x h) : ± 2.519 x 962 x 2.137 mm + Scale + Insert belt Dsdpfx Adexnlfxjaocp

Condition: used, empty load weight: 6,954 kg, axle configuration: 3 axles, first registration: 10/2018, next inspection (TÜV): 11/2025, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,950 mm, loading space volume: 99 m³, suspension: air, tire size: 445/45 R19,5, Year of construction: 2018, Equipment: ABS, Unladen weight: 6,954 kg, load securing with certificate, cargo area (L x W x H): 13,620 mm x 2,480 mm x 2,950 mm, tire size: 445/45 R19.5, certificate DIN EN 12642 (Code XL), cargo volume: 99 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, electronic braking system (EBS), toolbox, piggyback configuration, connection plugs 1x15 and 2x7 pin, antispray, lift roof (manual), new curtains, new tarpaulin. You can find our complete vehicle range at . Looking for financing? With our Value Added Service, we offer custom financing options, full service, and telematics solutions. We are happy to advise you. Dedpfx Adjxtrmmeascp

Condition: good (used), JBT M Fryer, 6m x 600mm. Fully optioned fryer. Electrically heated, Teflon infeed, sediment removal, touchscreen controls etc. The JBT M Fryer is a high-performance industrial fryer designed for large-scale food production. The M Fryer is used primarily in the food industry to fry various products such as chicken, fish, snacks, and other prepared foods. Dsdpfx Adjud Ry Ssaecp

Condition: good (used), axle configuration: 3 axles, first registration: 01/2017, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5, wheelbase: 8,960 mm, color: silver, Year of construction: 2017, Equipment: ABS, = Additional options and equipment = - EBS (Electronic Braking System) - Piggyback compatible - Air suspension - Swing doors - Stanchion pockets - Disc brakes Dsdpfx Asxtqtfsdascp - Sliding roof - Sliding curtain side = Notes = KRONE SD STANDARD CURTAIN SIDE TRAILER, SLIDING ROOF, SWING DOORS, ABS/EBS, SAF AXLES WITH DISC BRAKES, STANCHION POCKETS, PIGGYBACK COMPATIBLE, DUTCH REGISTRATION DOCUMENTS = Further information = Axle configuration Tire size: 385/65 R22.5 Axle brand: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Empty weight: 6,915 kg Payload: 34,085 kg Gross vehicle weight: 41,000 kg Condition Technical condition: good Visual condition: good Damages: none Identification License plate: OP-21-PB = Company information = Gast Trucks Venlo B.V. | Up to 30 pictures and a video available. Since 1998 specialized in purchase, sale, import, and export of used commercial vehicles. Location: Venlo (NL), 10 km from the border, 70 km from Düsseldorf Airport, 55 km from Eindhoven Airport (NL). Transport and export documents/license plates available for an additional cost to ports in the Netherlands, Belgium, or Germany. Reservation without down payment is not possible!

Condition: used, Year of construction: 2006, x-travel 1050 mm y-travel 510 mm z-travel 510 mm control Fusion 640 M Nexus spindle taper DIN 69871/SK40 Feed speed 8000 mm/min. turning speed range 35 - 12.000 U/min rapid travel x/y/z 36 m/min distance spindle /table max. 660 mm distance spindle /table min. 150 mm no. of tools in the magazine 30 Stück tool taper CAT 40 Tool diameter 80 mm wotkpiece diameter with 2 vacant positions max. 125 mm max. tool weight 8 kg max. tool length 350 mm table length 1300 mm table width 550 mm number of T-slots 3 T-slot - width 18 mm T-slot - distance 100 mm max. table load 1200 kg table height over floor 850 mm coolant tank 250 l coolant pump 4,5 bar internal coolant system feed 15 bar coolant capacity 271 l/min required air pressure 700 l/min spindle drive 18,5 connected load frequency 400 V connected load 36,6 kVA frequency 50 Hz Needed pneumatic pressure 5 (bei 200 l/min) bar weight of the machine ca. 6,9 t dimensions of the machine ca. 2,90 x 2,84 x 2,81 m Including special accessories: -Cooling through the spindle (15 bar) -Chip conveyor, hinged belt on the left side -Torque-dependent drilling cycle (Mazatrol) -Automatic determination of drilling depth increments after torque detection. (preferably in combination with HSS tool) -Interface set Contents: - Interface for keyboard - Interface for mouse - Interface for printer Retrofitting not possible Machine color gray / black -CNC Performance Option Package Package contents: - Shared variables (600 pairs) - MAZAK Tornado thread tapping (EIA/ISO) - Synchronous thread cutting - EIA/ISO input function - EIA/ISO special function Spiral interpolation (G02.1, G03.1), 3D tool correction (G40-G42) Scaling (G50, G51) etc. - EIA/ISO, Constant feed (G93) When using this function, the feed rate remains constant for straight and curved combinations on the contour. - EIA/ISO tool length measurement (G37) - EIA/ISO, programme unit stop function Programme sequence is automatically stopped at a specified programme unit. - MAZACC-2D (Mazatrol & EIA/ISO) Precision control function for precise vector interpolation and optimal acceleration and deceleration at edges and radii. This enables improved two-dimensional shape accuracy. - Additional workpiece coordinate system (G54.1 P1 - 48) 48 pairs - Spiral machining function (G33) for boring head machining Dodpfx Adexp Rywoaocp (e.g. with d'Andrea tool) - Used machine without warranty - - All dimensions, weight and performance data are non-binding

Condition: new, empty load weight: 9,150 kg, maximum load weight: 30,850 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,100 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ABS, air suspension with lifting and lowering function, axle load scales, total loading area length approx. 9,100 mm, low bed approx. 6,900 mm long, loaded loading height approx. 890 mm, 24 lashing rings each rated at 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing strip on the outside of the ramps and rear incline, laterally adjustable loading ramps, wooden floor 68 mm thick, storage box with lid for lashing chains or straps, contour marking as per regulation, rotating beacon, spring-loaded parking brake, including axle load indicators, vehicle fully hot-dip galvanized, surcharge for: hydraulic ramp displacement = price: €1,000. -- Subject to errors, mistakes and changes, sample images --, More data at: !, More details: ! Dedpjxt U Awofx Adaocp

Condition: good (used), axle configuration: 3 axles, first registration: 01/2017, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5, wheelbase: 8,960 mm, color: silver, Year of construction: 2017, Equipment: ABS, = Additional options and equipment = - EBS - Huckepack (piggyback compatible) - Air suspension - Rear portal doors - Stanchion pockets - Disc brakes - Sliding roof - Sliding curtain = Comments = KRONE SD STANDARD CURTAIN SIDE SEMI-TRAILER, SLIDING ROOF, PORTAL DOORS, ABS/EBS, SAF AXLES WITH DISC BRAKES, STANCHION POCKETS, HUCKEPACK COMPATIBLE, DUTCH REGISTRATION DOCUMENTS = Further information = Axle configuration Tyre size: 385/65 R22.5 Axle make: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Empty weight: 6,915 kg Payload: 34,085 kg Gross vehicle weight: 41,000 kg Dodpfxsxtqr Uo Adajcp Condition Technical condition: good Visual condition: good Damages: none Identification Registration number: OP-22-PB = Company information = Gast Trucks Venlo B.V. | Up to 30 images and a video at | Since 1998, we have specialized in the purchase, sale, import, and export of used commercial vehicles. Location: Venlo (NL) | 10 km from the border | 70 km from Düsseldorf Airport | 55 km from Eindhoven Airport (NL) | Transport and export documents/registration possible at extra cost to ports in the Netherlands, Belgium or Germany. Reservation without deposit is not possible!

Condition: good (used), axle configuration: 3 axles, first registration: 01/2017, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 8,960 mm, color: grey, Year of construction: 2017, Equipment: ABS, = Additional Options and Equipment = - EBS (Electronic Braking System) - Piggyback capability - Air suspension - Rear portal doors - Stanchion pockets - Disc brakes - Sliding roof - Sliding curtain (tautliner) = Notes = KRONE SD STANDARD CURTAIN SIDE SEMI-TRAILER, SLIDING ROOF, REAR PORTAL DOORS, ABS/EBS, SAF AXLES WITH DISC BRAKES, STANCHION POCKETS, PIGGYBACK CAPABLE, DUTCH REGISTRATION WITH VALID TUV UNTIL 10-2026 = Additional Information = Axle configuration: Tyre size: 385/65R22.5 Axle brand: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights: Dedpfx Ajxtqr Iedaecp Unladen weight: 6,915 kg Payload: 34,085 kg Gross vehicle weight: 41,000 kg Maintenance: MOT (Technical Inspection): valid until 10/2026 Condition: Technical condition: good Visual condition: good Damage: none Identification: Registration number: OP-36-PB = Company Information = Gast Trucks Venlo B.V. | Up to 30 photos and a video available | Since 1998 we have specialised in the purchase, sale, import, and export of used commercial vehicles. Location: Venlo (NL) | 10 km from the border | 70 km from Düsseldorf Airport | 55 km from Eindhoven Airport (NL). Transport and export documentation/registration plates available at an extra cost to ports in the Netherlands, Belgium, or Germany. Reservation without down payment is not possible!