Used Wheelchair Scales for sale (2,496)

Year of construction: 2013, condition: excellent (used), functionality: fully functional, REF: MM6423 Complete weighing and bagging system which has previously been used to pack frozen peas and vegetarian products into pillow packs. This system comprises of the following equipment: 1 x Infeed swan-neck conveyor with flighted belt mounted on mobile frame (stored outside). Date of manufacture - 2013. Belt width - 245mm wide. Kjdpfx Aqsy Um T Hoqedr 1 x Yamato Scale Dataweigh (UK) Ltd ADW-514AWCC 14-head multi-head weigher with dimple pans. Manufacturer - Yamato Scale Co., Ltd. Speed - up to 120 drops/minute (depending on product and weight). Weighing range - up to 1000g. Rated to IP66 (waterproof). 1 x Gantry unit with steps. Footprint dimensions - 5.7m long x 2.7m wide x 2.72m high. 1 x Gainsborough Engineering Ltd GV2K3 vertical form, fill and seal bagging machine. Manufacturer - Gainsborough Engineering Ltd. Date of manufacture - 2013. Sealing jaws: Horizontal - 360mm wide / Vertical - 420mm long. Packing speed - up to 60 packs/minute (depending on bag size). Bag size range: Smallest - 80mm wide x 80mm long / Largest - 320mm wide x 350mm long. Supplied with jaws for poly and laminate film, block-bottom and gusseted bags as well as 3 x forming tubes. Forming tubes: for forming pillow/’fin-seal’ packs measuring 130mm, 220mm and 270mm wide. 1 x Outfeed inclined conveyor. Belt dimensions – 2250mm long x 425mm wide. Outfeed height – 1000mmm. Some spare parts are also included. Videos available on request.

Condition: good (used), Floor weighing scale K-PZ Weigher indicator Type: KPZ 52E-9-1 Maximum weight: 300 kg Kdedex Hz Dqepfx Aqqer Minimum weight: 2 kg, e=: 0.1 kg, T=- 300 kg Dimensions: 800 mm x 1100 mm x 100 mm Including ramp

Condition: used, 5 x Horiba Analyser Units Kdjdpfxszvc U Hj Aqqor MEXA-7400 SLE, CVS-7200SLE & MEXA-7500D Analysing Accuracy +/- 1 % Full Scale, Response 2.0 Seconds Analysing: THC,CO,CO2,NOx,CH4. Horiba Analysers With Dilute 3 Phase Bagged Emissions And 2 Direct Raw Sample Lines (Pre & Post Cat)

Condition: used, This listing is for the Minebea Intec Combics 3 Scales The unit is in full working condition and is ready for immediate use Key Features of Combics 3 Display & Interface High-contrast graphic display, backlit for good visibility. Softkey-supported application packages and menus. Integrated traffic light indicators (red/yellow/green) for control applications. Kdedeymdpuepfx Aqqsr Functionality & Applications Combics 3 provides extensive weighing functions, including: Classification and sorting by weight Counting Fill-quantity control and dosing Formulation and statistical processes With the appropriate software, it also supports percentage weighing, gross/net/tare processes, and other advanced weighing operations. Connectivity & Interfaces Multiple data interfaces such as RS232, RS485/422, analogue 4-20 mA, Profibus DP, and Ethernet TCP/IP for integration into production systems. Robustness & Construction Designed for industrial environments with stainless-steel housing and high protection ratings (e.g., IP44 up to IP69K depending on configuration). Typical Use Cases The Combics 3 indicator is suitable for industries like food, pharmaceutical, chemical, metal, and electrical manufacturing — anywhere precise and configurable weighing with advanced control and reporting is needed. How It Fits Into Combics Scales Combics scales are modular systems: a weighing platform (bench or floor) is paired with an indicator like Combics 3 to form a complete weighing solution. The platform’s range can span from small 3 kg units up to heavy 3 t systems. If you want, I can also explain the differences between Combics 1, Combics 2, and Combics 3 indicators in more detail.

Condition: used, Used Becomix model Beco Mini RW 2.5 lab scale homogenising mixer.  Manufacturer: Becomix. Kdodpoyx Ibgsfx Aqqjr Capacity: Working capacity 0.5-3.5L. Dimensions: 800mm x 800mm x 900mm high. Also includes: -Integrated CIP system. -Agitator with scrapers. -Intuitive touch panel PLC control.  -Compact device with tempering unit. -Vacuum pump. - PLC control integrated into a mobile table. -Mixing vessel full vacuum to 1 bar, double jacket 4 bar.

Condition: good (used), Marel Stainless Steel floor weighing scale Marel weigher indicator M2200-P02 110-230 Vac, 0.24-0.12 A Kdsdpfx Aqox Il Ntsqer Dimensions scale: 900 mm x 900 mm.

Condition: used, This listing is for a Solent Scales Weight Set. The unit is in full working condition and is ready for immediate release. Weight Range from 1g - 500g Supplied in wooden box Kedpfx Aqsxxzbweqodr

Condition: used, This listing is for the Minebea Intec Combics 3 Scales The unit is in full working condition and is ready for immediate use Key Features of Combics 3 Display & Interface High-contrast graphic display, backlit for good visibility. Softkey-supported application packages and menus. Integrated traffic light indicators (red/yellow/green) for control applications. Functionality & Applications Combics 3 provides extensive weighing functions, including: Classification and sorting by weight Kjdpfxjylnybs Aqqsdr Counting Fill-quantity control and dosing Formulation and statistical processes With the appropriate software, it also supports percentage weighing, gross/net/tare processes, and other advanced weighing operations. Connectivity & Interfaces Multiple data interfaces such as RS232, RS485/422, analogue 4-20 mA, Profibus DP, and Ethernet TCP/IP for integration into production systems. Robustness & Construction Designed for industrial environments with stainless-steel housing and high protection ratings (e.g., IP44 up to IP69K depending on configuration). Typical Use Cases The Combics 3 indicator is suitable for industries like food, pharmaceutical, chemical, metal, and electrical manufacturing — anywhere precise and configurable weighing with advanced control and reporting is needed. How It Fits Into Combics Scales Combics scales are modular systems: a weighing platform (bench or floor) is paired with an indicator like Combics 3 to form a complete weighing solution. The platform’s range can span from small 3 kg units up to heavy 3 t systems. If you want, I can also explain the differences between Combics 1, Combics 2, and Combics 3 indicators in more detail.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, This microprocessor-controlled, fully automatic filling scale is designed for weighing and filling powders, granulates, or similar materials. The containers to be processed are manually placed underneath the filling station. The product is dispensed via a stainless-steel hopper with a capacity of approx. 20 liters and conveyed forward into the weighing area by means of a vibratory feeder. Once the preset weight is reached, the load tray opens, and the product is dispensed into the container below via a stainless-steel chute. Technical data: - Current weighing range: 1 – 10 g - Resolution: from 0.1 g - LC display with operator guidance Kodpfoyux Tdox Aqqedr - Automatic control of feeder speed - Statistics with counter, mean value, and standard deviation The output is up to 15 weighing cycles per minute.

Condition: like new (used), Year of construction: 2024, Twin lane linear weigher. All stainless steel. Kedpfxex Hgb Io Aqqjdr

Condition: like new (used), Year of construction: 2024, operating hours: 2,468 h, power: 39 kW (53.03 HP), input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, workpiece length (max.): 1,700 mm, workpiece width (max.): 800 mm, workpiece height (max.): 800 mm, workpiece weight (max.): 1,500 kg, number of slots in tool magazine: 60, total height: 3,000 mm, total length: 5,800 mm, total width: 4,300 mm, overall weight: 15,000 kg, table length: 1,700 mm, table width: 800 mm, mount diameter: 40 mm, number of spindles: 1, power of the milling unit: 39,000 W, rapid traverse Z-axis: 32 m/min, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, space requirement width: 4,300 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 1 rpm, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, POSmill E 1600 Control system: Heidenhain iTNC 640 Travel in X: 1600 mm Travel in Y: 800 mm Travel in Z: 800 mm Table size: 1700 x 800 mm SK 40 tool holder Number of tool positions: 60 Max. spindle speed: 10,000 rpm Rapid traverse rate: 32 m/min Weight: 13.5 t Operating hours: only 2,468 h (as of August 20, 2026) Equipment: - Glass scales in all 3 axes - Hexagon 3D infrared probe system - Air through the spindle - Coolant system 20 bar with band filter unit - Mobile electronic handwheel - Heidenhain iTNC 640 Kdjdpfx Aovwlp Hjqqjr - Tool changer with 60 positions, accessible from the front The machine is currently in our production facility and is still in use. Delivery is possible on short notice, subject to agreement. Training on the machine, transport, and commissioning are available for a separate fee. The machine has been regularly maintained and is in very good condition. Sale without accessories such as clamping devices, chip containers, workbenches, and tools.

Condition: repair required (used), Year of construction: 1985, functionality: limited functionality, machine/vehicle number: 11710519, spindle bore: 1,250 mm, spindle motor power: 56,000 W, quill travel distance: 1,000 mm, workpiece weight (max.): 1,600 kg, Equipment: documentation/manual, Basic machine information Machine type: CNC vertical lathe Manufacturer and model: Schiess AG - Schiess Moweg GmbH; Type 12DS100 Schiess Year of manufacture: 1985 Serial number: 11710519 Technical condition: Machine is operational; used, requires repair Technical specifications Working range: Table dimensions - Pallet D=1000 [mm], max. turning height H=800 [mm], max. turning diameter D=1250 [mm] Tailstock stroke S=1000 [mm]; adjustable cross slide - positioning every P=500 [mm] Table load capacity: 1600 kg Control system type: Siemens - Sinumerik 840 D Main drive power - 56 kW; Maximum spindle speed: 500 rpm Axis positioning accuracy: 0.02 [mm] - axis measuring system: optical scales Axis feed rate - "rapid": 6000 mm/min Axis feed rate - "working": 0.1 - 2000 mm/min Coolant - yes - through the tool Number of axes: 2-axis lathe Drive type: servo drives Additional equipment Tool magazine: 12 positions Kedpfxozvnbxo Aqqsdr Material feeding system: loading station at the pallet magazine Palletizing system - 2-pallet magazine; pallet loading station; machine table - total of 2 pallets Chip transport system - yes Cooling system - control cabinet air conditioning - yes Operating manual - paper version in Polish and German, digital version in German

Condition: excellent (used), Sartorius Combics 3 platform scale Stainless, platform scale with ramp, weigh range 1Kg to 300Kgs, platform 1000mm x 1000mm, 1Ph Ksdpeyifqiefx Aqqodr

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1990, operating hours: 10,000 h, machine/vehicle number: 3936990, Equipment: all wheel drive, compressor, emergency stop, hydraulics, Complete MacFab Wet-Cast Concrete Panel Production Line and 29 steel moulds. Kedpfx Aqjzndccsqodr Comprehensive Mould Package for the production of concrete sectional garages. Alternatively the moulds could be altered to produce products in a variety of sizes, shapes, textures and colours. Excellent / In Perfect Working order In daily operational use. Available for live operational viewings. Location: United Kingdom Terms: Ex Works (EXW) – Buyer to arrange decommissioning and transport. Overview, An exceptional opportunity to acquire a complete, turnkey precast concrete panel manufacturing setup from industry-leading manufacturer MacFab. This system is not sitting in storage; it is currently in day-to-day production, meticulously maintained, and performing to perfect operational standards. Ideal for an established precast yard looking to rapidly scale capacity, or an agricultural/civil contractor looking to bring high-volume panel manufacturing in-house without the long lead times of ordering new plant equipment. Fully operational hydraulic systems, premium vibration consolidation setup, and robust chassis engineering. Regularly serviced and completely reliable. 29 Heavy-Duty Steel Moulds Included: A massive inventory of robust commercial steel panel moulds engineered for high-cycle wet-cast production. Excellent face-side finish quality and squareness. Complete Turnkey Solution: Includes all necessary integrated controls and ancillaries to begin pouring immediately upon reassembly Zero Operational Risk: Buy with 100% confidence. Because the machine is in active use, buyers can verify hydraulic integrity, vibration consistency, and overall cycle efficiency first-hand. Massive Mould 29 commercial steel moulds independently represents substantial capital expense and manufacturing lead time. This package provides immediate scaling capability. Live Video / Inspections Available: Serious buyers are invited to visit the facility to see the machinery running in real-time. PRICE £59950.00 Plus VAT 70270 Euros (Open to sensible offers for a swift transaction) Sold Ex Works (EXW).

Condition: used, This listing is for an OHaus Harvard Trip 1400/1500 Scales 2-5ib Capacity Mechanical Balance The unit is in full working condition and is ready for immediate release The Harvard Trip series is a precision, mechanical two‑pan (comparative) balance. Kjdsxv Afljpfx Aqqjdr Its principal use is for comparative weighing (i.e. comparing masses, not simply reading off an absolute weight) — you place an unknown object on one pan and “poise” weights / sliding masses on the other pan until balance is achieved. Because it is mechanical, it requires no external power supply (no battery or electronics). The Harvard Trip balances are known for durability, low maintenance, and long service life.

Condition: used, This listing is for the Ohaus Harvard trip 1400/1500 series scales The unit is in full working condition and is ready for immediate use Kjdpsxv Difsfx Aqqjdr OHAUS Harvard Trip 1400/1500 Series Scales The OHAUS Harvard Trip 1400 and 1500 series are precision mechanical beam balances ideal for comparative and direct mass measurement. They operate on the Roberval principle, maintaining accuracy regardless of pan placement, and feature durable construction suited for education, laboratory, and industrial settings.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1162068, SPECIFICATION Table size 1370mm x 620mm X axis traverse 1016mm Y axis traverse 660mm Z axis traverse 635mm Spindle nose to table 102 – 737mm Spindle BT40 Spindle speeds 0-12,000rpm Spindle motor 22.4kW Rapid feed rate 18m/min Toolchanger capacity 30+ 1 tools Approximate weight 7750Kg Kdodpfszr H Tljx Aqqor MACHINE EQUIPPED WITH: - Haas CNC Control Swarf auger High speed machining Co-ordinate rotation and scaling Rigid tapping 5 off BT40 toolholders Filtermist extraction system Programmable coolant nozzle Lighting Guarding

Condition: good (used), machine/vehicle number: 923577, Year of construction: 2005, operating hours: 6,607 h, €6,500 net BT RR B2 electric reach truck with scale and height indicator Year of manufacture (equipment): 2005 Operating hours: 6,607 h Year of manufacture (battery): 38/2023 Battery capacity: 560 Ah at 48 volts Load capacity: 1,600 kg Overall height: 2,980 mm Lifting height: 6,750 mm; of which approximately 2,330 mm is free lift Overall dimensions approximately: 1,300 mm wide; 2,500 mm long (retracted) With integrated scale via oil pressure in 50 kg increments and lifting height indicator from 2.33 m Side shifter Tilting function 360-degree steering possible For a reach truck, this unit is very "off-road capable" and does not get stuck on every small obstacle. Weight approximately 3,500 kg including battery Including charger The equipment is in perfect working order and is immediately ready for use. Affordable delivery with a specialist company is possible. Please also check out our other listings. We constantly have many more high-lift and low-lift trucks and reach trucks in stock. Do you need spare parts for your reach truck, high-lift truck, etc.? Simply contact us. Not the right equipment? Just send us an email with your requirements and we will see if we can find the right one for you. Kdedpfszhx Umsx Aqqjr ID: 923577

Condition: excellent (used), Year of construction: 2018, Ref: 11136. 2018 Scodix Ultra Pro B2+ digital embellishment press designed to apply raised UV, spot varnish, metallic, foil and other premium effects to digital or litho printed sheets. Used for luxury packaging, book covers, greetings cards, high-end commercial print etc. Features: The Ultra Pro differs from the standard Ultra by offering: • Up to 4 polymer tanks • Automatic polymer switching • Ability to change between different embellishment polymers without manual cleaning • Support for multiple embellishment types on one platform This makes it much more productive if you regularly switch between: • Raised Scodix Sense • Flat Spot UV • Metallic effects • Digital foil • Other speciality polymers The Ultra Pro can produce: • Raised Spot UV (Scodix Sense) Kdjdezq Hmpepfx Aqqer • Flat Spot UV • Digital Foil • Metallic effects • Variable Data Enhancement (VDP/VDE) • Cast & Cure • Crystal effects • Braille • High-gloss textures Specification: Maximum sheet size 545 × 788 mm (B2+) Minimum sheet size 297 × 420 mm Maximum print area 504 × 748 mm Speed Up to 1,250 B2 sheets/hour Resolution Up to 2,540 × 450 dpi Registration 4 CCD camera Scodix RSP™ (Rotate, Scale & Position) Polymer thickness 5–250 microns Stock weight 135–675 gsm Maximum stock thickness 700 microns (0.7 mm) Supported substrates Offset, digital, laminated, coated, plastics and PVC Variable data PDF workflow with optional barcode system Machine dimensions: 6,327 × 1,788 × 1,889 mm Weight: approximately 4,400 kg Power: 3-phase, 220V, average 13.5 kVA (30 kVA max) Compressed air: 7 bar regulated

Year of construction: 2018, condition: used, functionality: fully functional, The 2018 Kronen GS10-2 is a versatile and efficient slicing machine suitable for a variety of food processing applications. Designed by the reputable manufacturer Kronen, this equipment is engineered to deliver consistent performance in both small and large-scale operations. With its precise blade adjustments, it accommodates different slicing thicknesses, making it ideal for preparing fruits, vegetables, and other foods with ease. Ksdpfjzqnlasx Aqqedr This used model maintains its robust build and reliability, ensuring long-lasting service while maintaining high safety standards. The machine's intuitive design simplifies operation and cleaning, contributing to reduced downtime and increased productivity. With user-friendly controls and efficient processing capability, the Kronen GS10-2 is a valuable addition to any food processing line seeking quality and efficiency.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 7,672 h, functionality: fully functional, machine/vehicle number: 0040000281C, turning length: 500 mm, spindle speed (max.): 6,000 rpm, overall weight: 4,300 kg, controller model: Heidenhain Plus IT DinPlus/TurnPlus V7, Note: The seller can offer disassembly and loading for an additional charge. TECHNICAL DETAILS Turning length: 500 mm Y-axis stroke for cross slide: ±40 mm Spindle type: Integrated spindle motor ISM 52 Plus Drive power: 20/27 kW at 100/40% duty cycle Spindle speed: 6,000 rpm Turret: 12-station disc turret Sauter Tool holder: VDI 30, DIN 69880-30 Tool drive: Connection/drive according to DIN 5480 MACHINE DETAILS Control: Heidenhain Plus IT DinPlus/TurnPlus V7 Clamping system: Hydraulic sub-collet chuck Draw tube inner diameter: 52 mm Measuring system: Direct measuring system Kdodpfx Asztb Adsqqor Glass scale: X-axis Connection power: 25 kVA Rated current: max. 40 A Fuse: 44 A Mains voltage: 400 V Mains frequency: 50/60 Hz Input voltage: 230 V Output voltage: 24 V Weight: 4,300 kg Operating hours (according to counter) Spindle hours: 7,672 h 2nd counter: 22,936 h EQUIPMENT C-axis Hydraulic spindle brake Tailstock Chip conveyor with coolant system Connection nozzle for oil mist separator including electrical connection Coolant spray gun Separate speed limiting device for the main spindle for power chucks with reference speeds below the maximum machine speed Documentation Tool case for disc turret Ø 30

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Kdodpfx Aszi Awhjqqer Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Digi AW 5600AT 1 Weighing, Wrapping & Labelling Machine This modern automatic packaging machine weighs, wraps, and labels products. The integrated weighing, packaging, and labelling system can be operated by a single person, making it a highly efficient and cost-effective solution. The large touchscreen display is easy to program with different PLU codes, allowing for quick and easy switching between different products. This weighing and labelling machine is equipped with two top labelling units and one bottom labelling unit. It is an ideal packaging solution for supermarkets, butcher shops, catering companies, and producers of fish, fruit, and vegetables. Kdjdpfxezvdfge Aqqor Technical specifications: - Production capacity: up to 36 packages/min - Product dimensions: Width: 130–380 mm / Height: 10–130 mm / Depth: 80–254 mm - Film width: 350–450 mm - Weighing range: max. 3/6 kg - Graduation: e = 1/2 g - Label type: thermal paper (width: 40–80 mm, length: 28–105 mm) - Number of labels: 2 × top, 1 × bottom - Voltage: 230 V (1+N, 50/60 Hz) - Power: 2.2 kW - Weight: 445 kg - Year of manufacture: 2017 - Machine dimensions (W × D × H): 1,430 × 1,535 × 1,465 mm

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, Equipment: cooling unit, Agie Charmilles FI 440 SLP Kedpfx Aqezgu Igjqodr year of manufacture 2008 operating hours 32,820 x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool option for wire chopper automatic wire threading/cutting and repair documentation and software machine powered up for inspection

Condition: good (used), functionality: fully functional, power: 398 kW (541.13 HP), gearing type: automatic, color: green, machine/vehicle number: 100114331.Y, PRICE IS FOR 2 UNITS - CAN BE SOLD SEPARATELY! Froling Biomass Boiler with CORDIVARI Buffer Tank - Complete Commercial Heating Systems Offered for sale is a high-capacity biomass heating system comprising a Froling TX 200 biomass boiler and CORDIVARI thermal buffer tank (puffer). This is a commercial-grade installation, designed for high-demand environments such as agricultural operations, industrial units, estates, and large-scale residential projects. The system has been installed and powered on for testing. Boiler Specification (Froling TX 200): • Boiler class: EN 303-5 Class 5 (high-efficiency, low-emissions standard) • Nominal heat output: 199 kW • Heat output range: 59 – 199 kW • Nominal fuel input rate: 214 kW • Permitted fuels (EN 14961): Wood pellets (Part 2: D06, Class A1) Wood chips (Part 4: P16A – P45A, Class A2) • Max. operating temperature: 90°C • Max. operating pressure: 3 bar • Water content (boiler): 570 litres • Electrical connection: 400V / 50Hz / C35A • Power consumption: 285 – 650 W • Production number: 100114331.Y The Froling TX 200 is a premium biomass boiler known for high efficiency, automated operation, and reliability in continuous-use environments. Paired with a CORDIVARI thermal buffer tank, the system delivers improved heat management, reduced cycling, and optimal energy utilisation. The system is also equipped with an automatic biomass feeding system from upper storage containers, ensuring consistent fuel delivery and minimal manual input. Important: The biomass system has not been used in full operation - it has only been tested. Operating time can be verified via the built-in digital counters, which display the total minutes the system has run. This combination provides a stable and efficient renewable heating solution, ideal for buyers looking to reduce long-term energy costs while meeting environmental targets. Ksdpfjyw I Hmjx Aqqsdr