Used Pipe Straightening Machine for sale (65,330)

Condition: new, Year of construction: 2025, tube diameter 48,3 mm wall strength 3,25 mm bending radius min. max. 180 mm Bending speed 20 °/sec total power requirement 2,4 kW weight of the machine ca. 700 t dimensions of the machine ca. 3880 x 800 x 1250 m Bjdpfx Alexcuice Iswl Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted

Condition: used, Year of construction: 1997, tube diameter 60 mm wall strength 6 mm bending radius min. 180 mm total power requirement 5,5 kW weight of the machine ca. 1300 t dimensions of the machine ca. 3500 x 1250 x 1300 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Bwodpst I D Uxjfx Al Isl Mandrel is no longer available, can be retrofitted

Condition: new, Year of construction: 2025, tube diameter 48,3 mm wall strength 3,25 mm bending radius min. max. 180 mm Bending speed 20 °/sec total power requirement 2,4 kW weight of the machine ca. 700 t dimensions of the machine ca. 3880 x 800 x 1250 m Description: Bedpfx Aexcuiijl Iewl Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted

Condition: new, tube diameter 1/2 - 2.0 Zoll wall strength 2.75 - 4.5 mm ST pressure 10.0 t weight of the machine ca. 46.0 kg With a hinged bending frame for efficient work - Various bending dies included - Universally applicable for gas, boiler, and water pipes - Fast work thanks to rapid feed - With a tripod stand for safe work Bedpfxexaac Ne Al Iewl - Also ideal for copper and coated pipes - Bends up to 90° can be created Features: - Bending dies: ½" - ¾" - 1" - 1 ¼" - 1 ½" - 2"

Condition: new, tube diameter 33,7 x 3,4 GAS mm tube diameter 35,0 x 2,5 STAHL mm tube diameter 35,0 x 1,5 EDELST mm bending radius min. R10 - R 190 mm bending angle max. 0 - 180 ° tool taper 6-kant 40 mm Bodpexab E Sefx Al Ijwl voltage 230 V total power requirement 0,9 kW weight of the machine ca. 23,0 kg Description: - MediBender "070" digital - with maximum bending performance for 35 x 2.5 mm steel tubes - Excellent bending quality with very tight bending radii . (from 2 x tube diameter) and bending angles between 0° and 180° - Easy to operate - High accuracy and reliability - Fast tool changes (within seconds) - Easy to transport - Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: new, tube diameter 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm revolutions per minute 2.0 U/min voltage 230 Volt total power requirement 1.1 kW weight 80.0 kg range L-W-H 410 x 1000 x 570 mm ERCOLINA MediBender "MB 42 M" - Capacity steel pipe 42 x 3.0mm - Capacity gas pipe 1“1/4 gas x 3.5 mm Bwedpjxaa Sdsfx Al Iol - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - 6-edge tool holder - Min. outside diameter 5 mm - 1/8“ gas Equipment: - patented fast tool change system - one bending speed - freely movable foot switch - bending tools on request for an additional charge including ERCOLINA microprocessor control: - with 30 programs each program with up to 9 bending angles programmable - in addition, the necessary correction angles can be entered . for each bending angle in the working mode BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: good (used), Thread cutting machine, pipe thread cutter -Pipe deburrer: for thread cutting machine -Pipe size: up to inner Ø 58 mm -Dimensions: see photos -Dimensions: 270/250/H75 mm Bwodpfswyu Hfex Al Ijl -Weight: 2.7 kg

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Bodpjtgvgpefx Al Iewl Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Condition: used, Technical details: plate width: 1000 mm plate thickness: 3,0 mm smallest sheet thickness: 0,5 mm distance between columns: 920 mm Number of Straightening rolls: oben 4x unten 4x Stück / pieces roll diameter: ca. 75 mm number of rollers: 2 oben und 2 unten St. weight of the machine ca.: 6,5 t dimensions L x W x H: 3,8 x 2,2 x 2,1 m This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 pull-out rollers Ø 110 x 480 mm, 2x top adjustable approx. 20 mm and 2x bottom, hydraulic Roller support Infeed height 1400 mm Hydraulic system equipment Operated externally Recommendation: complete conveyor system (decoiler + loading device + straightener with hydraulic feed) for sale with optional stock no. 0100572. Bwodpfx Alovgbgae Iol *

Condition: used, Year of construction: 1993, Technical details: tube diameter: 80 mm tube diameter min.: 6 mm control for program: Gelma MM-1 tube pipe draw up length: 1800 mm weight of the machine ca.: 0,232 t dimension machine xH: 1,9 x 0,7 x 1,3 m Semi-automatic PIPE BENDING MACHINE Operating modes are manual but also semi-automatic Application: for multiple bending of pipes The swivel unit with bending preselection for 3 different bending angles in single and automatic mode. The machine is currently equipped with a stop bar for tube size Ø 10mm for 6 angle settings. The bending machine is movable/adjustable. Equipment/accessories: Bwjdpsu Ibyyofx Al Iol 6 cam rods/stop rods 6 control disks Bending tool for Ø 12mm *

Condition: used, Technical details: plate width: 800 mm coil weight: 12 t sheet width - max.: 800 mm sheet width - min.: 300 mm thickness of strip/band: max. 5,0 mm band speed: 4,5 / 25 m/min work height max.: 1700 mm Payload: 12,0 to (Coil) Weight approx.: 7,3 + 6,62 t dimensions of coil: 3,2 x 1,9 x 2,7 m dimension machine xH: 2,5 x 2,6 x 2,45 m Decoiler with loading device Can optionally be sold together with stock no. 0100571. straightening unit: Infeed rollers: 2 x Ø 144 x 850mm Straightening rolls: 3 x bottom rolls, rigid, Ø 100 x 850mm, 30mm adjustable 3 x top rollers, Ø 110 x 850mm; 30 mm adjustable Bwedpfxju Ic Avs Al Iol Coil unwinding machine: Outer Ø 1.500mm Strip width max. 800mm Load capacity max. 12 to Clamping Ø 470 - 630 / 570 - 730mm Transport unit LxWxH: 1700 x 1500 x 1000mm; crosswise running, with prism support 1000 x1000mm Machine will be offered and sold with Stock no. 0100521 as a decoiling and streightening line. *

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, shaft straightening system -Pipe straightening system for: steel pipes or shafts, flame straightening with water cooling Bwjdpectmvzofx Al Iol -Drainage channel and water pump -2x: Counter-holder prism -Counter bearing: adjustable -Dimensions: 4000/870/H810 mm -Empty weight: 500 kg

Condition: excellent (used), Year of construction: 1990, number of straightening rollers: 23, roller diameter: 80 mm, Number off straightening rolls 23 units Roll diameter 80 mm Minimum thickess 0,5 mm Maximum thickness 12 mm Digital readout system position rolls Fine adjustment down feed   Rolling width: 1450mm Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:16mm Top Roll Ø: 80mm Bwodpfexyhhaex Al Iel Bottom Roll Ø: 80mm Number of rolls: 23 Rolling speed: 3,75 - 15 M/Min Adjustiment lower roll: 26mm/min. Power: 30kW Length: 3000mm Width: 4000mm Height: 2400mm Weight: 28000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1988, wire working range: 0,1 - 1,3 mm cutting length: 5 - 70 mm output: 400/min. Bedpfx Ale Syv Tj Iowl complete with ciller and motorized decoiler

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 106340 € 2009.83 € 150 mm 1000 mm 1900 mm 1475 mm 2700 kg 170 cm³ 150 x 7,1 mm 6" x 7,11 mm 150 x 9 mm 141,3 x 6,55 mm 141,3 x 6,55 mm 168,3 x 9 mm 168,3 x 9 mm 64 x 6 mm 88,9 x 3,65 mm 110 mm 150 x 45 stehend, 150 x 6 mm 800 mm 100 mm 10 mm 1 U/min 15 kW Bsdpfx Ajynmtlol Iswl TCPlus Control with 7“ Touchscreen Programmable bending speed for each individual bend Possibility to bend left and right Users manaul

Condition: new, neu Bwodpfx Asynmr Uel Iel ca. 8 Wochen ab Auftragse Italien 39500 € 754.45 € 127 mm 850 mm 1200 mm 850 mm 720 kg 80 cm³ 127 x 7,1 mm 4" x 8,56 mm 127 x 7,1 mm 114,3 x 5,6 mm 114,3 x 5,6 mm 139,7 x 8,8 mm 139,7 x 8,8 mm 64 x 6 mm 88,9 x 3,65 mm 50 x 4 mm 90 mm 130 x 25 stehend, 130 x 6 mm 700 mm 36 mm 10 mm 0 - 0,75 U/min 3.5 kW digital read out for bending angle 4 hexagonal tool holders (40, 50 80 and 110 mm) Possibility to bend left and right Users manaul Tools on request

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 29100 € Bwedpfx Aljynmr Ie Iol 555.81 € 100 mm 500 mm 1200 mm 850 mm 480 kg 43 cm³ 100 x 6 mm 3" 1/2 x 4 mm 100 x 6 mm 100 x 3,6 mm 100 x 3,6 mm 114,3 x 6,3 mm 114,3 x 6,3 mm 114,4 x 6,3 mm 88,9 x 3,65 mm 100 x 5 mm 70 mm 100 x 25 stehend, 100 x 5 mm 400 mm 36 mm 10 mm 0 - 1,3 U/min 3.5 kW quick-change tooling system digital display of bend material spring back compensation remote control of bend, return and emergency stop functions accurate counterbending die positioning footswitch 3 hexagonal tool holders heavy-duty steel gear case users manaul tools not included, prices on request

Condition: excellent (used), Year of construction: 1985, wire diameter range: 1,5 - 7,0 mm cutting length: up to 8.000 mm wire feeding speed: 29 - 90 mtr./min Bwedpfsmt A Svsx Al Iol

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Max. bending diameter: Ø 76 mm Max. pipe wall thickness: 3.0 mm Max. bending length: 6000 mm Min. bending angle: 0.1° Max. bending angle: 190° Max. bending radius: 260 mm Operating speed Rotation speed: 200°/second Bending speed: 30°/second Bwedoyr N Erepfx Al Iel Feed speed: max. 1000 mm/second Tolerances: Rotation (°): ±0.1° Bending (°): ±0.1° Feed (°): ±0.1° Hydraulic system: Hydraulic motor power: 7.5 kW Max. hydraulic pressure: 180 bar Hydraulic oil: 120 liters Rated power: 44 kW Voltage: 400 V AC Dimensions L x W x H: 8900 x 1200 x 1850 mm Weight: 4850 kg Description: Materials: Steel | Stainless steel | Aluminum | Brass | Copper and other flexible materials for simple to complex shapes Display: Portable 15-inch color touchscreen monitor Control panel: Servo and hydraulic motion control, plus selectable servo axis speed Foot pedal User-friendly AKYAPAK control software Hydraulic system: Bosch, Parker Operating modes: Manual, semi-automatic, and fully automatic Programming: Y-B-C or X-Y-Z mode Cooling system: Hydraulic oil cooler Pipe clamp: Hydraulic Industrial PC: Pentium processor, 256 MB RAM, hard drive, and floppy disk drive Lubrication system: Automatic Control: PLC-based Rotary axis: Servo-controlled Bending system: Hydraulic Auxiliary axes: Hydraulic Forward and reverse movement: Manual Pipe length calculation: Automatic, according to program Workpiece display: 3D 360° graphic display

Condition: used, Year of construction: 1996, sheet width 360 mm coil weight 550 kg coil internal dia. 420 - 520 mm Bodpfx Aoymp Rdol Iswl coil external diameter 1600 mm total power requirement 2,2 kW weight of the machine ca. 2 t

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, control type: NC control, degree of automation: semi-automatic, actuation type: electric, coil inner diameter: 300 mm, coil outer diameter: 1,300 mm, coil weight: 1,500 kg, product width (max.): 550 mm, sheet thickness (max.): 3 mm, power: 2.5 kW (3.40 HP), input voltage: 200 V, input current: 3 A, input frequency: 50 Hz, Equipment: documentation/manual, Manufacturer: DATEC Type: DATEC MN7-550U Year of manufacture: 2000 Max. sheet width: 550 mm Power: 3x200V, approx. 2.5kW Sheet thickness: approx. 0.3 – 3.2 mm Coil weight: up to 1–2 tons Bwsdjyangkepfx Al Ijl

Condition: used, Year of construction: 1985, material width 500 mm coil weight 1,0 t material thickness 0,4 - 5,0 mm coil internal diameter 420 - 520 mm coil external diameter 1200 mm material cross-cut 1500 mm² Bwodpfjvut Hzex Al Ijl no. of straightening rolls 9 number of draw-in rolls 2 speed 0 - 80 m/min Weight 1,70 t Dimensions (WxDxH) 2,7 x 1,3 x 1,9 m Weight 1,35 t dimensions 2,2 x 1,2 x 2,0 m Straightening machine with infinitely variable drive, intermediate lifting of the inlet rolls, hydraulic threading wedge Decoiler with auxiliary drive, hydraulic centralized expansion, snubber roll

Condition: used, Year of construction: 1995, material width 400 mm coil weight 2 x 2,0 t material thickness 0,4 - 3,0 mm coil internal diameter 460 - 530 mm coil external diameter 1500 mm material cross-cut 1200 mm² no. of straightening rolls 9 straightening roll diameter 30 mm Bwjdpfev Svaxjx Al Isl speed 0 - 40 m/min power requirement 15,0 kW Weight 5,2 t Dimensions (WxDxH) 2,15 x 4,5 x 2,85 m - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll - coil loop control via ultrasound

Condition: used, Year of construction: 1994, material width 500 mm Bsdpfxjvut Eqs Al Ijwl coil weight 3,0 t material thickness 0,2 - 2,5 mm coil internal diameter 470 - 530 mm coil external diameter 1400 mm no. of straightening rolls 9 straightening roll diameter 40 mm number of inlet and outlet rolls 4 material cross-cut 1200 mm² speed 1,5 - 30 m/min dimensions decoiler (WxDxH) 1,9 x 0,6 x 1,7 m weight decoiler 1,1 t dimensions straightener (WxDxH) 3,3 x 1,3 x 2,7 m weight straightener 3,0 t - Straightening machine RYD 40 x 500 with infinitely variable drive (driven lower straightening rolls), straightening rolls individually adjustable by motor, supporting rolls, outlet roller basket - Decoiler DY 500 x 3000 with hydraulic auxiliary drive, pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, hydraulic insertion aid, hydraulic coil lifting device - coil loop control can be offered without or with putting into operation in given condition

Condition: ready for operation (used), Year of construction: 1999, Tube diameter: 25mm, wall thickness: 2mm, bending angle: 190°, feed length: 2000mm, weight: 2t, left-bending. Accessories: CNC IsoBend 2.0. Without mandrel bending device, monitor glass has impact damage but is still functional. An on-site inspection is possible. Bedpoxcx Atofx Al Iswl