Used Plastic Pipe Welding Machine for sale (69,025)

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm Dcodpfx Asykvdlsnfog - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Year of construction: 2012, condition: used, Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder, socket welding tool set Dedpfx Ansqy Rl Hjfjcg -Manufacturer: Ritmo, socket welding tool set type R 63 TFE -Voltage: 230V -Power: 1400W -Sleeves: Ø 16 - 63 mm, see photo -Dimension box: 450/350/H130 mm -Weight: 8.4 kg

Condition: good (used), Year of construction: 2001, Offer 24367 Orbital welding system + pipe cutting machine Technical data: - Orbital welding unit AXXAIR SALS 150 ( AIR LIQUIDE Prestotig 180 ) - Cooling unit ACW 015 ( SAF Prestocool ) - Circular seam welding unit AXXAIR CC 220 with motorized rotation - Raw cutting machine AXXAIR CC 80 - Transport trolley - Table height 830 mm Dsdpfx Ajvhchhonfjcg - 220 V connection - Space requirement approx. W 1400 x H 1450 x D 1000 mm - Weight approx. 150 kg

Condition: ready for operation (used), PE-KPE pipe welding machine, butt fusion machine, plastic pipe welder, mirror fusion machine, DYTRON ST 160, Used machine Manufacturer: DYTRON Model: ST 160 Overall dimensions: Length: 1000 mm Width: 530 mm Height: 1160 mm Electrical data: 230 V DYTRON – Welding Bench ST-160 The ST 160 welding bench is designed for socket and mirror welding of thermoplastic pipes. It supports: Mirror (butt) welding: 40 – 160 mm diameter Socket welding: 40 – 110 mm diameter To facilitate mirror welding, the set includes: Special mobile workbench Electric pipe planer POLYS P-4a welding unit (1200 W) Clamp inserts in sizes: d40, 50, 63, 75, 90, 110, 125, 140 mm Welding pair sets: d40, 50, 63, 75, 90, 110 mm Vise-style clamping mechanism for fittings Mirror insert: d170 Metal case for accessories Support stand Allen keys: 4 mm and 8 mm The ST-160 welding bench is equipped with a microprocessor-controlled welding unit. The standard set also includes a special workbench and a metal case with accessories. Dcedpfx Ajxnqt Uonfog ST-160 Technical Specifications Feature Specification Socket welding range 40 – 110 mm Mirror (butt) welding range 40 – 160 mm Welding unit power 1200 W Planer power 630 W Power supply 230 V / 115 V Temperature control Electronic regulator Temperature range 180 – 280 °C Temperature indicator LED diode Planer Electric Weight 70 kg

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, pipe diameter (max.): 9,000 mm, input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, model: GS-HG Maximum length of pipe: Dcjdpfjwwqvwsx Anfjg

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, travel distance X-axis: 6,000 mm, workpiece weight (max.): 1,000 kg, laser power: 20,000 W, pipe diameter (max.): 6,000 mm, Equipment: cooling unit, safety light barrier, Max. Length of Tube: 6m Cutting Capacity of Round Tube: Φ360mm Cutting Capacity of Square Tube: Φ360mm Max. Load: 1000kg Zero Waste Cutting Full stroke movement, capable of cutting both ends of the pipe, improving material utilization Full Pipe Cutting available Standard auxiliary loading and unloading system loading, unloading, and cutting of 6m full pipes available Bevel Cutting Function available Bevel angle adjustable from 0-45° Dedpsv D T H Tefx Anfocg Capable of V, X, Y, K type bevel cutting Optional Automatic Loading and Unloading Saves labor costs, and increases production efficiency Intelligent production for high efficiency

Year of construction: 2025, condition: new, functionality: fully functional, High Speed · High Precision · High Stability The VS series high-speed laser tube cutter for small pipes has arrived! This machine features a high-precision chuck system designed specifically for tube cutting. With excellent sealing and dust protection, it delivers clamping accuracy within ≤0.1mm ideal for ultra-precise small tube processing. The chuck rotates up to 160 RPM, with acceleration reaching 1.5G, easily enabling high-efficiency processing of small-diameter tubes. easily enabling high-efficiency processing of small-diameter tubes. it supports true ultra-short tail cutting saving cost from the very beginning. Available in 3000W and 6000W, Dcsdpfx Ajwwzudjnfeg Handles square and round tubes from 10mm to 120mm in diameter, Also capable of cutting angle steel, channel steel, and I-beams A true all-rounder for small pipe fabrication. Supports automatic or semi-automatic loading Effortlessly enables smart and automated processing. One machine replaces three workers — A powerful and efficient tool for small pipe manufacturing!

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 1,500 W, positioning speed: 80 m/min, repeat accuracy: 0.03 mm, input frequency: 50 Hz, warranty duration: 24 months, working range: 6,000 mm, Equipment: cooling unit, safety light barrier, G-12A HIGH SPEED PROFESSIONAL TUBE LASER CUTTING MACHINE 1500-3000W The G series is equipped with many high-quality components with extreme performance and powerful cutting functions,suitable for tube cutting of various types and diameters ● The Highest Standards of Chucks in the Industry ● Two Methods for Fewer-tailing Cutting ● Variable Diameter Wheel Supporting ● Automatic Unloading Device ● Super Dust Removal System ● Patented Dust Baffle ● High-strength Cage Structure Welded Machine Bed Technical Parameter: Power: 1500W-3000W Maximum Tube Processing Size: 6000mm*φ120mm Max. Rotating Speed of Chucks: 160r/min X/Y-axis Positioning Accuracy≤0.05mm X/Y-axis Repositioning Accuracy≤±0.03mm Maximum positioning speed: 80m/min Max. Acceleration: 1.5G Round Tube Processing Dim: Φ10mm-Φ120mm Square Tube Processing Dim: 10mm*120mm Overall Dimensions: 9000mm*2700mm The Highest Standards of Chucks in the Industry The highest standards of chucks in the industry with strong clamping force, high rigidity, high speed, and stable performance Two Methods for Fewer-tailing Cutting Support two fewer-tailing cutting methods , choose one of them on the software interface according to different tube diameters Chuck double jaws: standard double jaws, small tube cutting precision is guaranteed Dsdpjuc Sifjfx Anfjcg Support: 2 sets of variable diameter wheel support standard (optional to increase to 3 sets)/optional servo support Unloading: [3M/4M] cylinder unloading rack/optional-[3M/4M] servo unloading rack/optional Loading: [Fully automatic loading rack/simple fully automatic loading rack/semi-automatic loading rack]/optional Dust removal: standard rear card hollow dust removal Short tail: chuck fixed, crossbeam fixed, short tail, front card open, rear card Continue to move forward, shorten the tail, ≥80 mm; if the short tail function is not used, the tail is about 200 mm Variable Diameter Wheel Supporting G Series has a wide range of cutting for various types and diameters of tubes, supported by the variable diameter wheel Automatic Unloading Device Efficient automatic unloading, saving time and labor costs, greatly improving production efficiency Super Dust Removal System The super dust removal system with ventilation design inside the chuck and the tube reduces the slag hanging in the tube, which is independently researched and developed by Glorystar Patented Dust Baffle Patented dust baffle protects important components from pollution and ensures stable performance High-strength Cage Structure Welded Machine Bed The industry’s highest-quality high strength cage structure welded machine bed with long life, anti-vibration, anti-torsion and anti-deformation

Condition: used, functionality: fully functional, Industrial pipe welding and positioning system designed for repeatable circumferential welds. Includes: Rotating pipe positioner (adjustable angle) Automated welding torch assembly (water-cooled) Control unit Cooling system (chiller) Overhead support arm Function: Suitable for precision welding of pipes and tubular components, maintaining consistent torch position and rotation. Dcjdpfsy N U D Nex Anfsg COMPLETE SETUP AS SEEN

Condition: good (used), 2 used water-cooled spot welding machines Technical data: Max. welding output: 23.7 kVA Rated output at 50% duty cycle: 8 kVA Short-circuit current: 8.8 kA Open-circuit voltage in 4 steps: from 2 – 3.2 V Electrode force: 17 – 235 daN Cooling water flow rate: 4 l/min Dcjdpfx Aney Naq Iefjg Weight: 85 kg per machine Price: 550,-- EUR net per machine Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2006, tube diameter 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm revolutions per minute 2.0 U/min voltage 230 Volt Control ERCOLINA total power requirement 1.1 kW weight ca. 75.0 kg range L-W-H 410 x 1000 x 570 mm current new price incl. accessories ~ 10.000 euros conditions like new ! special price on request ERCOLINA MediBender "MB 42" - Capacity steel tube 42 x 3.0 mm - Capacity gas pipe 1"1/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. Bending radius 10-260 mm - Minimum radius 2 x D - Hexagonal tool holder - Min. outside diameter 5 mm - 1/8" gas Equipment : - patented quick tool change system - one bending speed - free-moving foot switch Dcsdpfx Anoy Ig R Ssfog * Bending tool included in the scope of delivery : - D 20 sliding shoe new bending segment R 67 mm - D 32 sliding shoe new bending segment R 82 mm - D 35 Sliding shoe new bending segment R 90 mm - D 42 Sliding shoe new bending segment R 130 mm - D 26 Sliding shoe without bending segment * the bending segments are on order * approx. delivery end of MAY 2026

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Features of Gala Underwater Pelletizing Systems • Die-Face Cutter: Utilizes a die-face cutter where molten polymer strands are cut directly at the die face, ensuring uniform pellet sizes tailored to customer specifications. Dodpowm Nq Esfx Anfjcg • Centrifugal Dryer: Equipped with a centrifugal dryer that efficiently removes moisture from the pellets, eliminating the need for extended drying times. • Compact Design: The system's design eliminates the requirement for long water tanks, allowing for a more compact footprint and flexible layout in production facilities. • Ease of Operation: Designed for stable and continuous production, the system offers excellent operability, enabling a single operator to manage multiple lines effectively

Condition: used, Straightening and welding plate made of steel Machined steel plate from a tool frame Length: 2980 mm Width: 1380 mm Thickness: 74 mm - solid steel plate - milled surface Dcodjy N Du Rspfx Anfeg - 4 rectangular cutouts - plate equipped with several symmetrical bores - 4 bolted towing brackets Net weight: 2175 kg

Condition: used, Spot Welding Machine DALEX Type SL 16 - 2 Machine No. ZZH/N-10183 Year of manufacture: approx. 2002 Rated power at 50% duty cycle: 16 KVA Maximum welding power: 50 KVA Max. throat depth: 500 mm Max. electrode force: 17 - 278 daN Electrode arm Ø 45 mm Electrode holder Ø 25 mm Arm spacing: 150 mm / 300 mm Operating pressure: 1–6 bar Open circuit voltage: up to 3.6 Volt Connected load: 37 kVA Dedpfxey N Duko Anfscg Mains connection: 400 Volt, 50 Hz - Weld control MPS 200-003 - Welding cycle triggered via electric foot switch - Water-cooled Required space (L x W x H): 1100 x 720 x 1450 mm Weight: 230 kg Very good condition

Condition: excellent (used), Year of construction: 2004, Carl Cloos GLC 503 Quinto SD welding machine. A total of 4 units available. Year of manufacture: 2004-2004-1999. Price refers to 1 unit. Djdjtkuk Ropfx Anfocg

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system Dcsdpfx Ajx Hi I Djnfog -Manufacturer: Ess, MIG/MAG welding machine -Type: Pulsarc 350 -Max. welding power: 350 A -Water-cooled -Wire feeder case: ESS DVK 400 4-roller drive -Dimensions: 970/670/H1040 mm -Weight: 209 kg

Year of construction: 2023, condition: used, voltage 400 V 50 Hz V current intensivity 100 A output 36 kw compressed air 4,5 bar weight 3.200 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features: - Welding of pressed-in components in the cooling plate - 3000W fiber laser - Pneumatic suction of the cooling plate including rotary device - Siemens control Dcjdpfey Hl Nqsx Anfjg Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 2,200 h, functionality: fully functional, type of input current: three-phase, Equipment: documentation/manual, Recycling plant for plastic windows with granulate output (12 mm / 40 mm) The recycling plant is designed as a modular processing line for the treatment of dismantled plastic windows. The aim of the plant is the efficient shredding, separation, and classification of material into reusable plastic granulate of defined grain sizes (approx. 12 mm or 40 mm). Dcodpfxey I Urdj Anfog The plant consists of the following main components: 1. Feeding and infeed system The input material (plastic windows including attachments such as gaskets, metal fittings, and contaminants) is manually fed via a designated loading area. 2. Pre-shredding (Shredder) A powerful four-shaft shredder carries out the coarse shredding of window frames. The objective is to reduce bulky components to a manageable format and prepare the material for subsequent processing stages. 3. Conveyor technology Several conveyor belts link the individual process stages. They ensure a consistent material flow and optionally allow for manual visual inspection or re-sorting. 4. Metal separation To remove metallic components (e.g. steel reinforcements, screws, fittings), a magnetic separator is installed. This is designed as an overband magnet and reliably removes ferrous metals from the material stream. 5. Screening unit (Classification) The shredded material is passed through a screening unit, which separates particles according to grain size. Depending on the installed screen deck, defined fractions are produced, for example: • approx. 12 mm granulate (fine) • approx. 40 mm granulate (coarse) 6. Cleaning / Removal of impurities Light contaminants (dust, gasket residues, foreign materials) are removed by mechanical or air separation processes, which improves the quality of the final granulate. 7. Discharge and storage The finished granulate is discharged via conveyor belts into Big Bags.

Condition: new, functionality: fully functional, Year of construction: 2026, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need fior additional installation. Dcsdohwrhiepfx Anfjg Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Year of construction: 2000, condition: good (used), Offered from an insolvency is a pipe end processing machine Manufacturer unknown Model ?? Djdpefynfwsfx Anfecg Year of manufacture ?? Machine no.?? Technical data: Compressed air driven Tube diameter up to 401mm possible Accessories as shown

Year of construction: 2004, condition: excellent (used), Offered from an insolvency is a DC TIG welding machine Manufacturer Migatronic Model Pilot 2400 Year of manufacture 2004 Machine No. 04050694 Technical data: Dsdsfthy Rspfx Anfscg 380 volts Welding range 5-240Amps Welding power: 240Amps at 35% ED 170Amps at 100% ED 2/4 beat Pulse function HF ignition additional water cooling KG 2 No.25730509 220 Volt 8meter burner package with ground cable ---- without pressure reducer-- Dimensions in mm approx. 510x370x220

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Operating hours: approx. 3,000 h Djdpfx Ansy Nl U Sefecg

Condition: not inspected (used), functionality: unexamined, total height: 1,000 mm, total width: 800 mm, total length: 1,100 mm, overall weight: 150 kg, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you commit to collecting the items within the period from 23/06/2026 to 26/06/2026! Dedpfx Aoy D Nqaonfocg Auction of an ELEKTRA BECKUM electrode welding machine & an oxy-fuel welding unit! MACHINE DETAILS Dimensions (L x W x H): 1,100 x 800 x 1,000 mm Weight: 150 kg Note: The gas cylinders pictured are not included in the scope of delivery. External reference: 17

Condition: good (used), functionality: fully functional, power: 55 kW (74.78 HP), fuel type: diesel, operation weight: 14,300 kg, maximum load weight: 14,300 kg, emission class: euro5, Year of construction: 2023, operating hours: 419 h, Drill Arm Type: BUT 29 L Drill Feed Carriage Type / Length: HM 2X31R / 3090 mm Dcsdpfsy Enpwex Anfsg Drifter Type: COP 1638HD + T38 07 Electric Drive: 75 kW 400 Volt 50 Hz Diesel Engine / Type / Power / Emission Standard: Deutz / TD 3.6 / 55 kW / Stage V Compressor / Type / Capacity: GAR30 / 62 l/s at 10 bar Lubrication System: automatic and manual High Pressure Cleaner: for cleaning the drill arm and feed carriage Fire Suppression System: ANSUL Auxiliary Socket: CEE 400 Volt 32 Ampere Operating Weight: 14,300 kg Cable Reel 400 Volt: Cable length 110 meters Minimum Drilling Diameter: 45 mm Dimensions: 11,040 x 1,750 x 2,828 mm (L x W x H) with cab roof raised Operating Hours Electric Motor: 1041 Operating Hours Drill Motor: 512

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed, lowering column Dcjdpfjy A Iftjx Anfeg -Manufacturer: Nucleus, Absen column 35 for ultrasonic welding machines -Eco FR361101 -Servo motor: Dunkermotoren GR 42x40, voltage 24 V -Receiver: Shaft Ø 20 x 18 mm see photo -Dimensions: 270/230/H85 mm -Weight: 2.5 kg