Used Plank for sale (182)

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis Manufactured in a self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Subframe made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering system, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st and 3rd axles can be lifted separately with starting aid (without central control unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Nwedpfsgcw Riex Abuon Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel rims + approx. 120 kg) Kingpin Aluminum landing legs, manufacturer: Alu-Leg, 2 x 10 tons support load, for air suspension, we use swivel feet. Braking System According to E.E.G. standard, two-circuit braking system, EBS E system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator. Electrical System According to the guidelines of the STVZO with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear panel, 24-volt system with 1x 15-pole and 2x 7-pole socket, with side marker lights in LED design, 2 work spotlights at the rear, 2 LED work spotlights on the side at the height of the kingpin, 1 LED work spotlight inside at the front left, operable from the outside. Body/Tipping Body "Body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with upper and lower belt, plank profiles fully welded inside, floor as a sliding floor system installed on 140 mm aluminum crossmembers, floor load approx. 7 tons/m2, crossmembers mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30 mm thick with 4 swivel rod locks, mounted in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, a following aluminum wall suspended in the reinforced aluminum upper belt with "Kevlar tarpaulin" for complete discharge, lateral brush seal and additional Kevlar tarpaulin on the side, integrated discharge chute with folding cover plate in the floor end, operable from the outside on the left rear, viewing window at the rear left, 1 sample slide in each rear door, i.e. 2 pieces, service door on the left in the front wall. Hydraulic System "Cargo Floor" 24-plank system - smooth design Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD gliders, approx. 8 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed brackets on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed brackets, line size NW 21, fixed brackets with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operation in a lockable, waterproof box, without hydraulic hoses. Accessories PVC fenders wi

Condition: new, axle configuration: 2 axles, total width: 25,500 mm, total height: 32,600 mm, Equipment: ABS, Humbaur HBT 106224 BS Basic, sloped Technical data: Internal dimensions: approx. 6,200 mm x 2,450 mm x 400 mm Overall dimensions: approx. 8,400 mm x 2,550 mm x 3,260 mm Permissible total weight: 11,900 kg Payload: approx. 9,100 kg Wheelbase: 990 mm Tires: 235/75 R17.5 inches Loading height: approx. 920 mm Drawbar length: approx. 1,800 mm Coupling height: approx. 750-1000 mm Njdpfx Asyfvg Asbuewn Ramp angle: approx. 16° Plank length: approx. 2,600 mm Plank width: approx. 540 mm 3 pairs of lashing rings, 3,000 kg per lashing point, lashing rings recessed in the floor 7 pairs of lashing rings, 1,000 kg per lashing point, lashing rings in the outer frame Standard equipment: Axles: axles from renowned manufacturers Suspension: low-maintenance parabolic suspension with load compensation Tires: tires according to the manufacturer's choice on steel rim Braking system: ABS braking system according to ECE directive with ALB function, ABS plug connection ISO 7638, spindle parking brake, 2 fail-safe coupling heads red/yellow ISO 1728 Towing device: drawbar with DIN screw eye Ø 40 mm, galvanized, steplessly adjustable via crank Electrical system: 24V lighting system with multi-chamber tail lights and LED side marker lights, 15-pin connector for lighting Frame: solid, welded and hot-dip galvanized frame, sloped rear area, incline 12° Floor: floor made of 40 mm softwood planks Side walls: side walls made of anodized aluminum, foldable and removable on the side, corner posts galvanized, pluggable at the front and rear Ramps: 2 foldable steel ramps, 1-piece, galvanized, laterally adjustable, ramp lift 1 gas spring per ramp, ramp locking on the rear crossmember, ramp surface made of galvanized grating Support: reinforced 12 t geared support with load and quick gear, 2 telescoping folding supports on the left and right at the rear of the vehicle Equipment: steel fenders with anti-spray mats, side impact protection up to the 1st axle, foldable, 2 chock blocks with holder, contour marking on the side and rear, space for a two-line license plate on the left ramp On request, we will provide you with a leasing or financing offer. Mr. Seidel (Tel.) will be happy to assist you. You can find more information on our website. ... Errors, changes and prior sale reserved!!! = Further information = GVWR: 11,900 kg Please contact Tobias Ebert for further information.

Year of construction: 2026, condition: used, NEW, built in 2026 Automatic loading and unloading station. Suitable for solid wood, MDF, gypsum board, cement fiber board, and planks. Examples: Doors, planks, MDF panels, cabinet fronts, gypsum board, and facade panels. Adaptations to other products are possible. The machine operates at a constant speed andwith a set loading and unloading capacity. Nodpfxey S S Hto Abuown This allows you to easily automateyour loading and unloading processes and increase process reliability. The system operates with a 2-circuit vacuum system. Siemens control panel. Technical Specifications: - Manufacturer: Ka-Ma - Model: KR-1300-1 - Working width: 1,300 mm - Includes belt conveyor, length 3,000 mm - Working height: 930 ± 50 mm - PLC control, operated via a touch panel, Siemens S7-1200 - Loading and unloading of parts via 2 suction plates, length 442 mm - Automatic signal upon completion of the loading process - Max. horizontal speed: 0.5 m/s - Horizontal working stroke: 1,300 mm - Max. vertical speed: 0.5 m/s - Stack height approx. 1,000 mm (including pallet under the plate stack) - Loading side on the left in the direction of travel - Vertical working stroke: approx. 1,200 mm - Max. lifting capacity: approx. 85 kg, continuous operation 65 kg - Max. component width: 1,300 mm - Max. component length: approx. 2,850 mm - Max. conveyor belt speed: continuously variable up to max. 10 m/min. - Electric motor power: 1.5 kW- Electronic components: Schneider Electronics and Siemens - Weight: 1,200 kg Optional: 2-circuit vacuum system with 4 additional suction cups and the ability to lift the panels 15 mm on one side before vertical movement; required for all materials that can be vacuum-sealed. YouTube link:?v=WpRUnvPFqN0

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,500 kg, maximum load weight: 15,500 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, loading space width: 2,520 mm, loading space height: 890 mm, total length: 11,940 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-Tailored Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. More Information Chassis Steel welded construction Turntable with heavy-duty ball bearing Foldable rear support 2 outrigger plates with holder Aluminum side impact protection Splash guards at the rear, covering the entire width Semi-elliptical fenders for 1st and 2nd axles with anti-spray splash guards behind each axle, anti-spray splash guards in front of and behind the 3rd and 4th axles Excavator arm recess starting above the rear axles and extending to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing points, each 5 tons, in the excavator arm recess on the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm in front of the rear slope. 1 plastic toolbox with insert, w=620/h=360/d=440 mm, lockable with a padlock (lock not included). 1 storage box recessed into the gooseneck with a cover, W=720 mm / L=520 mm / D=170 mm Extendable widening sections to 3,000 mm Wooden planks, 70 mm, for widening to 3,000 mm Storage compartment for wooden planks under the loading area Lashing points for low-bed trailers (40 lashing options) 1 pair of lashing points on the gooseneck, each 5 tons 9 pairs of lashing eyes recessed on the top and side of the outer frame, each 10 tons 2 x at the front on the gooseneck 7 x in the low bed 6 pairs of lashing points in the outer frame of the low bed, each 5 tons (tie-down strap attachment) 3 pairs of folding lashing points, each 10 tons 1 x inside next to the main frame at the beginning of the low bed Nwodpfx Aboi Ri A Seujn 1 x on the gooseneck (overhanging) 1 x behind the last axle, recessed into the floor Coupling device, trailer turntable Tow hitch with tested 50 mm drawbar eye, drawbar eye inclined 8°, D-value min. 160 kN Axles + Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization at the front and rear (rocker arm equalization) Wheels and Tires 235 / 75 R 17.5, according to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS connector at the front, with connecting cable Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe connectors at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking lights (beacon removable) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at the front with steel/diamond plate covering followed by 70 mm soft wood flooring, steel/diamond plate covering in the wheel arch area Rear slope with 70 mm soft wood flooring Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable covered with wood with spring-assisted support Country of Registration/Signs Country of Registration: Germany 24/7 service hotline prepared for license plate holder, two lines Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Warning sign according to ECE - 70 Paintwork Frame hot-dip galvanized including passivation, 15-year

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Nedotp H Erepfx Abuown Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15

Condition: good (used), Year of construction: 2002, functionality: fully functional, Nailing machine Brand: LG Machine (Swedish) Year: 2002 Assembly nailing machine full automatick, high cpacity, stacking output. Normal wear, chains and sprockets changed a couple of years ago Techn info: Capacity pallet 800x1200mm approx. 600/day Dimensions of finished pallet Min-max: 60x80mm, 120x160mm Nedpoua A T Aofx Abuown Thickness of boards: 16,19,22,25mm Width of wood plank min-max 70-150mm Number of nail pipes 6, mechanical Loose nail dimension 80, 90 mm Saw machine (4 saw blades) for cutting the corners Total dimension/set up approx: 15x7m Price: ask for offer

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 9,900 kg, maximum load weight: 14,100 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, tire size: 235 / 75 r 17,5, Custom-tailored transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further information Chassis Steel welded construction Turntable with robust ball bearing, storage box recessed Turntable extension Foldable rear support 2 wheel chocks with holder Aluminum side impact protection Mud flaps at the rear across the entire width Extendable wideners to 3,000 mm (not in rear slope) (However, the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the center of the loading area Wooden planks 70 mm for widening to 3000 mm Tie-down eyes, low-loader type 3 pairs of tie-down points, each rated at 10 tons, integrated in the front of the floor 6 pairs of tie-down anchor plates, top and side in the outer frame, each rated at 10 tons 1 x in the neck area the rest distributed in between with a maximum distance of 1200 mm 1 x rear slope 5 pairs of pocket slots recessed in the outer frame, inside 70 x 40 mm, (can be converted to 5-ton ring tie-down eyes, not included in the scope of supply) Towing device, turntable trailer Tow bar with tested 40 mm towing eye Note! With a 40 mm towing eye, the permissible total weight of the truck must not exceed 18000 kg; otherwise, a 50 mm towing eye is required. Axles + Suspension SAF drum brake axles Axle / chassis laser-aligned, reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization in the front and rear (rocker equalization) Wheels & Tires 235 / 75 R 17.5, according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be pulled by towing vehicles which guarantee the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking light (beacon can be removed) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Nodpfx Asi Ri I Eobuewn Front area: steel floor followed by 70 mm softwood floor, steel / diamond plate in the wheel arch area Rear slope with 70 mm softwood floor Access Ramps Steel ramps, 2800 mm long, 750 mm wide, laterally movable covered with wood with gas spring support Operating Instructions With an axle load of 10,000 kg, an exemption permit is required, only indivisible loads are possible!!! The stated total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle / support and saddle loads. Country of Registration / Signs Country of Registration: Germany 1 with Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for license plate holder, two-line Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint finish Frame: RAL 3002 Carmine Red 10-year warranty against rust-through Tow bar: galv

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 12,800 kg, maximum load weight: 44,200 kg, overall weight: 57,000 kg, axle configuration: > 3 axles, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are individually tailored to customer specifications. Chassis, Low-bed Semi-trailer Steel welded construction, drawbar plate with interchangeable 2 kingpin and 2 kingpin positions 24 tons, 2-speed landing gear, one-sided operation Foldable rear support 2 chock blocks with holder Aluminum side guard 1 plastic toolbox, with insert tray, w=620/h=360/d=440 mm, lockable with a padlock Extendable widening sections to 3,000 mm Storage compartment for timber planks on gooseneck, transverse at the front Timber planks 70 mm for widening to 3,000 mm Telescoping Central tube frame in cleanly welded, interlocking telescoping frame sections. Extendable by a maximum of 6,000 mm and lockable approximately every 1,000 mm Locking with mechanical pin lock With sliding platform Tie-down eyes, low-bed 2 pairs of ring-type tie-down eyes, each 5 tons, at the front on the gooseneck; 11 pairs of tie-down loops embedded at the top and side in the outer frame, each 10 tons; 2 on the gooseneck, 9 distributed in the low-bed area; first tie-down eye 250 mm from the front and last at most 250 mm from the rear, spacing of tie-down eyes not greater than 1,100 mm 8 pairs of socket pockets embedded in the outer frame, inner dimensions 70 x 40 mm, (can be converted to 5-ton ring-type tie-down eyes, not included in the scope of supply) 3 pairs of folding tie-down eyes additionally embedded in the low-bed area, each 10 tons; 1 at the front of the low-bed, 1 in front of the 1st axle, and 1 behind the 3rd axle Axles + Suspension SAF drum brake axles Axle/chassis laser-measured, reducing tire wear and fuel consumption Last 2 axles steerable, with automatic reverse locking via reversing light and manual locking function via a button on the vehicle Air suspension with lift and lower valve Wheels and Tires 235 / 75 R 17.5, manufacturer Fulda Steel rims in twin configuration, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake Vehicle - Driving Stability System Nodji Ri Hnepfx Abujwn Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab; truck must be appropriately prepared; no truck installation (no calibrated scale) 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 1 LED revolving beacon with holder, switched via parking lights (beacon removable) 2 pairs of warning panels, double LED-lit and extendable to 3,000 mm 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Floor Gooseneck with steel / chequered plate surface Storage box embedded in the ramp to the gooseneck Then with 70 mm soft wood floor, steel/chequered plate surface in the wheel arch area Rear slope with 70 mm soft wood floor Side Walls 25 mm aluminum hollow profile, 400 mm high, at the front and side on the gooseneck, pluggable Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally movable Covered with wood Hydraulically operated via tractor PTO with flow control Hydraulic connection with SVK coupling NW 10/3, without connect

Condition: as good as new (ex-display), Year of construction: 2024, Pre-crusher Base machine starting from €29,950 net *Options available at an extra charge Ideal for pre-crushing bulky materials such as pallets, planks, beams, fruit crates, polystyrene, plastics, and more. To produce wood chips, the pre-crusher can also be installed directly above a single-shaft shredder. Machine in pre-production *Special options available at an extra charge Nsdpfxofd Icij Abujwn Your advantages: + Volume reduction of up to 70% + Significantly lower transport costs + Low disposal costs + Production of fuel material + Also ideal as a pre-crusher for a single-shaft shredder to produce wood chips Weight: 1,200 kg Dimensions: 2050x850x1600 mm Cutting head opening: 1300x700 mm *also available optionally in 1600x700 mm (motor then 11 kW) (Extra charge: + €4,995 net) Throughput: up to 50 pallets/pieces per hour *strongly material-dependent Motor: 7.5 kW Options: Industrial hopper attachment (3-sided closed) + €4,950 net Extra emergency/off button + €495 net 200 mm extension + €497 net Requirements for the raw material: - Moisture content less than 30% ATRO - The machine must be installed in accordance with CE guidelines, and measures must be taken on site to prevent access from below (into the cutting head). - Pallets up to a size of 1200x800 mm can be processed. - Longer parts can also be processed vertically.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 14,300 kg, maximum load weight: 9,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, loading space height: 900 mm, total length: 12,000 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Nedpfxji Ri I Nj Abuewn Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further Information Chassis Steel welded construction Turntable with robust ball bearing Foldable rear support 2 wheel chocks + holder Aluminum side underrun protection Splash guards at the rear over the entire width Quarter panel fenders in front of the 1st axle Excavator arm recess starting above the rear axles to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing points of 5 tons each in the excavator arm recess on the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm in front of the rear slope 1 storage box recessed in the gooseneck in the floor with a lid, W=720 mm/ L=520 mm / D= 170 mm 1st pair of wheel recesses recessed in the gooseneck in the low-loader wheel well area, sloped for access, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! Frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses between the axles recessed in the low-loader in the wheel well area, sloped for access, length at the bottom approx. 600, approx. 300 mm deep. Note! Frame in the main beam area is 300 mm higher than the wheel recess. Wheel recess cover pull-out from the main frame, with wood inserts. Distance from the outer frame, beam to beam, approx. 1280 mm Extensions pull-out to 3,000 mm, foldable at the wheel recess extensions (extension not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for wooden planks in the middle of the loading area or under the loading area, depending on technical feasibility Wooden planks 70 mm for extension to 3000 mm Lashing points, low-loader 1 pair of ring lashing points recessed at the front on the gooseneck, each 5 tons 8 pairs of lashing eyes at the top and on the side recessed in the outer frame, each 10 tons 2 x at the front on the gooseneck 6 x in the low-loader, the first lashing point 250 mm from the front and the last one max. 250 mm from the rear, the distance between the lashing points is no more than 1100 mm 5 pairs of ring lashing points recessed in the outer frame, each 5 tons (can be converted to stake pockets) Coupling system, trailer, turntable Drawbar with tested 50 mm drawbar eye with 8° inclined drawbar eye Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned, reducing tire wear and fuel consumption Air suspension with lifting and lowering valve, can be operated separately at the front and rear Wheels and tires 235/75R17.5 according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake Trailer Info Center for displaying vehicle data such as axle load (no calibrated scale) and odometer Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be suitably prepared, no truck installation (no calibrated scale) Vehicle-driving stability system Duomatic connection at the front, with connecting cable to the towing vehicle EBS, Electronic Braking System with EBS plug at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plat

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, overall weight: 24,000 kg, axle configuration: > 3 axles, loading space height: 900 mm, total length: 11,940 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Additional Information Low-bed semi-trailer chassis Steel welded construction Turntable with heavy-duty ball bearing ring Folding rear outriggers 2 support wedges with holder Aluminum side impact protection Rear splash guards covering the entire width Semi-fender for 1st and 2nd axles with anti-spray splash guards behind each axle, anti-spray splash guards in front of and behind the 3rd and 4th axles Excavator arm recess above the rear axles, extending to the rear, approximately 1800 mm long, approximately 650 mm wide and approximately 150 mm deep, 2 pairs of lashing points of 5 tons each in the excavator arm recess, laterally on the longitudinal frame, approximately 300 mm from the front and approximately 200 mm in front of the rear slope 1 plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock (lock not included) 1 storage box recessed in the gooseneck at the bottom with lid, W=720 mm/ L=520 mm / D= 170 mm Extendable widening elements to 3,000 mm (not in the rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Wooden planks 70 mm for widening to 3000 mm Storage compartment for wooden planks under the loading platform Lashing eyes for low-bed trailer (40 lashing options) 1 pair of lashing eyes on the gooseneck, each 5 tons 9 pairs of lashing eyes embedded above and on the side in the outer frame, each 10 tons 2 x at the front on the gooseneck 7 x in the low bed 6 pairs of lashing eyes in the outer frame from the low bed, each 5 tons (for attaching tie-down straps) 3 pairs of folding lashing eyes additionally, each 10 tons 1 x inside next to the main frame at the beginning of the low bed 1 x on the gooseneck (protruding) 1 x behind the last axle, recessed in the floor Nwjdsi Ri Daepfx Abuon Coupling device for the trailer turntable Drawbar with tested 50 mm drawbar eye, drawbar eye inclined by 8° / D-value min. 160 kN Axles + Suspension Drum brake axles Parabolic spring suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization at the front and rear (rocker equalization) Wheels and Tires 235 / 75 R 17.5 according to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking lights (beacon removable) 2 pairs of warning signs double LED illuminated and extendable to 3,000 mm Floor Gooseneck at the front with steel / checkered plate covering followed by 70 mm softwood floor, wheel arch area with steel / checkered plate covering Rear slope with 70 mm softwood floor Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable covered with wood Hydraulically operated via towing vehicle auxiliary drive with throttle, operation on the left-hand side at the front Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Country of Registration / Signs Country of Registration: Germany 24/7 Service Hotline prepared for two-line license plate holder Contour marking with reflective strips ac

Condition: new, mileage: 10 km, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, loading space volume: 21 m³, loading space length: 4,200 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, tail-lift, Welcome to carmax24 Today, you have the opportunity to purchase one of our selected, inspected vehicles. Vehicles that have been professionally inspected and offer high quality ensure high customer satisfaction, and have done so since 2008. This is our daily approach, because you, as a customer, are our top priority at carmax24. Renault Master chassis with single cab, FWD, EXTRA 3.5 t, L3 Engine: * Blue dCi 170 diesel engine * Displacement: 1,997 cm³ * Power: 170 hp (125 kW) * Torque: 380 Nm at 1,500 rpm * Emission standard: Euro VIe * Front-wheel drive * 6-speed manual transmission Dimensions and weights: * Permissible total weight: 3,500 kg * Wheelbase: 4,215 mm * Fuel tank: 80 l * AdBlue tank: 22 l * Permissible towing capacity (braked): 2,500 kg * Permissible towing capacity (unbraked): 750 kg Exterior: * Mineral White * 16'' steel wheels * Tires 205/75 R16 * Single tires at the rear * Front apron with unpainted elements * Extended exterior mirror arms * Fog lights * Heated windshield * Front mud flaps ----Equipment Conversion package: * Extended wiring (+65 cm) for superstructures * Extended exterior mirror arms * eCall antenna integrated into the exterior mirror Safety equipment: * ABS * ESP / ASR * Cruise control with speed limiter * Lane keeping assist * Emergency brake assist * Traffic sign recognition * Driver fatigue warning * Tire pressure monitoring system * Rain sensor * Light sensor * Rear parking sensors * LED daytime running lights and LED low beam headlights * Driver airbag * Central locking * Wide-view interior mirror * Steel engine underbody protection * RCall emergency call system Comfort equipment: * Manual air conditioning * Electric windows * Electrically adjustable and heated exterior mirrors * Height-adjustable seat belt * Multifunctional bench seat "Mobile Office" for 2 people * Comfortable driver's seat with suspension * Lockable glove compartment * Pull-out glove compartment * Interior lighting * 12-volt socket * Steering wheel adjustable in two levels Multimedia: * OpenR Link multimedia system with 10-inch touchscreen * Wireless smartphone integration (Apple CarPlay / Android Auto) * Inductive smartphone charging station Other equipment: * 230-A alternator * Full-size spare wheel * Preparation for trailer coupling * Steel partition with window ----Superstructure description Platform body with tarpaulin frame for 8 Euro pallets Superstructure construction: * Aluminum side boards, 400 mm high * Symmetrically divided side walls * Cassette closure system * Waterproof 15 mm screen-printed floor with non-slip coating * Underside sealed and silicone-sealed * Subframe and longitudinal beams made of aluminum profiles System 70/90 * Folding access ladder on the rear side board * Front wall protection made of aluminum profiles * 8 galvanized lashing points for load securing * Plastic mudguards with splash protection * Triple wood planking in the superstructure * Aluminum tarpaulin frame * Custom-made tarpaulin SIOEN, 670 g/m² * Color: Silver (RAL 9006) * Translucent tarpaulin roof Additional superstructure equipment: * Right side tarpaulin (curtainsider version) * Quickly detachable center supports * Extended rear light carrier * MAX sleeper cab * Four side wind deflectors * Painted in Polar White * Speedometer * Tail lift 750 kg with tailgate ----Superstructure dimensions Internal dimensions: * Length: 4,200 mm * Width: 2,200 mm * Height: 2,300 mm External dimensions: Nwedpfx Aszlm Uvjbujn * Length: 4,250 mm * Width: 2,270 mm * Height: 2,

Condition: used, Adjustable cutters on a hydraulic sleeve for the production of log planks (tongue and groove). Current settings: Nwjdpfx Ajzvnbfobuon Groove profile width: 58.45 mm Tongue profile width: 53.25 mm Technical data: - Cutter: HW - Cutting circle (ø): ~ 160 mm - Bore: 50 mm - Material: Steel

Condition: new, Year of construction: 2026, Robust guardrail package for double row (2 x 1,100mm) External dimensions: 2,550mm, including mounting material 1 x center support base 2 x Z-profiles 2 x U-impact guards SIGMA PROFILE as guardrail Year of manufacture: New Height: 400mm Width: 2,550mm Color: yellow Price: incl. VAT Please request shipping with your postal code. Our guardrails can also be used in other applications, e.g., on a glass wall with several components, see images 4 and 5. If desired, please send us an inquiry. Other items such as: Floor fixings Connectors Load warning signs Impact guards Guardrails Grating Njdpfxjzux A Rj Abuswn Back wall grating Deep shelves Barrier railings and much more… Just ask us! “Benefit from over 20 years of industry experience – we will provide you with competent and personalized advice as your experienced specialist retailer for new and used shelving systems” Sales and delivery conditions (B2B) - Prices & Logistics: All prices are net, ex works. Express delivery via our own fleet is possible after individual agreement. - Offer status: All offers are subject to change. Subject to prior sale. - Reservation of title: The goods remain our unrestricted property until full payment (no right of disposal or processing). - Warranty: Exclusive distribution to commercial enterprises (§ 14 BGB). For used and IIa goods, liability for defects in materials is excluded. For new goods, the respective manufacturer's guarantees apply.

Condition: used, 1 Pair of Transport Dollies, Platform Trolleys, Transport Carts GORR 1 pair = 2 transport dollies, each equipped with 4 swivel castors Load capacity per dolly: 1000 kg Platform size per dolly: 1050 x 255 mm Material thickness of support plate/platform: 4 mm Overall height: 145 mm Wheel diameter: 100 mm Wheel width: 37 mm Load capacity per fixed castor: 300 kg - Each dolly has 4 swiveling fixed castors with white polyamide wheels, bolted to the support plate - Each dolly is equipped with two fixed castors with brakes - Steel support plate as the platform surface with reinforced side edge Dimensions L x W x H: 1050 x 265 x 145 mm Net weight per dolly: 17 kg Njdpfx Asxcixlebuswn Net weight (pair): 34 kg Used, in good condition Pricing per pair = 2-piece heavy-duty dollies Included in delivery are 2 of these universally and flexibly applicable heavy-duty transport dollies. Currently 50 pairs in stock. Both dollies together offer 8 swivel castors and a combined load capacity of up to 2 tonnes. Our customers use them to transport squared timber, boards, planks, and sawn lumber. Others use them for moving angle steel, beams, and heavy pipes in the workshop. Also suitable for transporting electrical cabinets, control cabinets, heavy tables, and furniture. Ideal as machinery skates, material dollies, or machine moving gear.

Condition: new, Year of construction: 2026, warranty duration: 12 months, TRSI Automatic Saw: Power, Precision, and Optimization TRSI Ø600 Push-Feed Saw – 90° Cut: Perfect for Beech Sawing The TRSI Ø600 is an automatic optimizer push-feed saw, designed for cutting beech planks with constant thickness and variable width. Its modular monoblock structure and Ø600 blade make it ideal for high-precision operations. Key Features: Programmed and Optimized Cutting: Precise and repetitive operations, or optimization to reduce waste and maximize material yield. TRSI Ø700 Push-Feed Saw – 90° Cut: Beam and Packaging Cutting The TRSI Ø700 is designed for high-performance cutting of beams and packaging. With a Ø700 blade and a robust structure, it provides high productivity in both sawmills and packaging industries. Key Features: Programmed and Optimized Cutting: Maximizing material usage while minimizing waste. TRSI: The Customizable Solution for Every Sector The TRSI is the ideal automatic saw for companies seeking speed, reliability, and precision. Customizable to your needs, it fits perfectly into various production sectors. Advanced Technology: Advanced Software: Easy programming and process optimization. Full Integration: Compatible with your business systems. Remote Assistance: Technical support always available. Superior Performance: Ultra-Precise Movement: Rapid push-feed on ball screw guide for smooth and accurate cuts. Brushless Motors: High performance and reliability. Nwedsv Iqddepfx Abusn Reinforced Structure: Guarantees smooth operation without vibrations. Accessories for Maximum Productivity: Customized Loaders: Reducing downtime. Manual and Automatic Printers: Clear marking of semi-finished products. Optimized Discharge Systems: For all types of processing. Trust Cursal for Innovation and Performance With the TRSI, you can achieve maximum efficiency and precision, customizing every aspect of the machine to optimize production flow. Contact us for a tailored consultation and take your production to new levels of quality.

Condition: new, Wooden impact protection, 240 cm, new Nwjdpfozfakdjx Abusn 🧰 Product features • Manufacturer: various • Color: yellow, wood • Condition: New • Length: approx. 245 cm • Width: approx. 18 cm • Height: approx. 40 cm • Scope of delivery: 2x U-profile, 2x wooden plank 240 x 75 cm, and 8x M12 concrete anchors Various designs available, please inquire! 💰 Price €135 net, excluding VAT • Quantity discount: upon request • Shipping costs: available throughout Europe, upon request • Delivery time: immediately available • Inspection and pickup: possible by appointment • Product number: P10432 Constantly over 5,000 linear meters of pallet racking in stock from numerous manufacturers (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & heavy-duty racking, used & new Description: Are you looking for high-quality warehouse racking for sale? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of warehouse platforms & steel structure platforms immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether you want to buy pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS, USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Warehouse Technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi Cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest, SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete, all-round worry-free package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including a clean-sweep removal. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: Cataloging, office preparation, inspection, goods delivery, logistics, dismantling and clean-sweep handover. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, Year of construction: 2026, machine/vehicle number: TRV 2000 Ø700R, warranty duration: 12 months, High-Speed Optimization in Sawmills: TRV 2000 Makes It Possible! Discover TRV 2000, the perfect optimizer for both planed and unplaned boards, designed to deliver high precision, large cutting capacity, and incredible speed. A perfect combination of performance that will revolutionize your sawmill's workflow! Nodpfx Absv Ip U Ijuewn Advanced Technology for Outstanding Results The TRV 2000 is equipped with the tried-and-tested CURSAL software, the technological core powering other optimizer series as well. This software is the ideal solution to speed up the production process, optimizing logs by recovering the lateral part, which traditional machines cannot efficiently utilize. It synchronizes perfectly with the multi-blade system to complete the cycle efficiently. With a feed speed of 150 m/min (auto-limited), thanks to the Brushless motor, TRV 2000 eliminates the risk of accumulations, maintaining a continuous flow that integrates seamlessly with the fastest log saws. Uncompromising Precision TRV 2000’s precision is so high that re-sawing after passing through the multi-blade system is unnecessary. Thanks to its innovative technology, it is ideal for optimizing medium-sized, precious woods, making it the perfect choice for those seeking flawless results. Superb Design and Functionality The machine body is equipped with a reliable feed system, enabling movement from right to left through 8 toothed rollers. Pneumatic pressure wheels are specifically designed for unplaned boards, and the in-line optimization capability within the monoblock of the cutting machine allows it to work on curved and twisted boards. Explore Incredible Performance Watch the video on the side and see how TRV 2000 can optimize your production with extraordinary performance. Ideal Applications: Semi-finished wood products for furniture Packaging industry Recovery of boards from the sides of the log Windows, construction, and flooring Laminated, planks, structures TRV 2000: The Ultimate Solution for Modern Sawmills.

Condition: new, Year of construction: 2026, TRV 1700: High-Performance Optimizing Saw for Finger Joint and Moulders The TRV 1700 is the ultimate solution for woodworking professionals, offering precision, speed, and advanced optimization. Designed in three different configurations with Ø 500, 550, and 600 mm blades, this optimizing saw is available in the following versions: TRV 1700A – Automatic with programmed cutting TRV 1700E – EB – Optimized cutting to maximize yield and reduce waste TRV 1700S – Simple cutting on mark for essential operations Thanks to its high versatility, the TRV 1700 is perfect for quickly removing knots and defects from wooden boards. It is the ideal machine for applications where maximum length is a priority, such as parquet flooring, or when only defect selection is required. Advanced Optimization Software Over 100 cutting plans, customizable by width and quality Smart optimization algorithm for: Commercial value Waste reduction Quantity Length Mixed optimization Pre-cut simulation for maximum efficiency Real-time monitoring of processed quantities Integrated optimization within the saw, simplifying the workflow Machine Structure & Technical Features Reliable conveyor belt traction system without adhesive parts Non-slip rubberized pressure wheels, suitable for all materials Thick pressor for safe clamping of chips and irregularities PLC-controlled silent blowers for continuous workspace cleaning The TRV 1700 integrates seamlessly with moulders and finger jointers via Cursal’s feeding systems, ensuring a smooth and efficient in-line production process. Nsdpfx Ajv Iqbpobuewn With a wide range of customizable accessories (see the dedicated section), it can be upgraded from a standard version to a fully equipped high-end configuration. Recommended Applications Parquet flooring – Ideal Windows and construction – High compatibility Furniture components – Well-suited Laminated beams, planks, structures – Well-suited Finger joint recovery – Ideal Choose the TRV 1700 for optimized cuts, reduced waste, and maximum production efficiency.

Condition: new, Year of construction: 2025, the SQUALO 615 multi-blade or multi-blade circular saw with single shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. moreover it is 2-in-1 as it can be configured as a trimming machine with 1 or more movable blades. ideal for the production of strips, squares, sawn timber, profiles, edged planks, prisms, boards, elements for pallets. Rollers / conveyor belt width 620 mm Width of infeed / outfeed conveyor rollers 620/720 mm Max saw unit width 590 mm Max cutting height (without pad) mm 150 (mm 125 Trimming machine) Min. Length working mm 800 Max width passage 800 mm Nsdpfshpbxiex Abuown Blades hole diameter mm 80 (mm 104 Trimming machine) Circular blades diameter 250/470 mm (480 mm Trimming machine) Blade shaft speed rpm 3.800 Variable feed speed with ROLLS 3 - 36 m / min Variable feed speed with CARPET m / min 4 - 25 optional: softstarter start

Condition: new, axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, total length: 17,700 mm, total width: 2,990 mm, total height: 3,810 mm, suspension: hydraulics, tire size: 245/70 R17.5 Double Fitted (143/141J), color: red, Equipment: tail-lift, Color: Red Payload: 100,250 kg Weights: King-Pin load: 38,000 kg Axle load: 12,000 kg Total axle load: 96,000 kg Nwsdpfxsuu E Tis Abusn GVW: 134,000 kg Empty weight: 33,750 kg Loading capacity: 100,250 kg Axles: Axle brand: BPW ECO PLUS Hydraulic suspension 7-axle steering (Axle 2 rigid) First two axles liftable Drum brakes Brake SN 3020 for ABS, with sensors Tires: 245 / 70 R17.5 Double fitted Load index 143/141J Measurements: Length: 17,700 mm Extensions: 19,500 mm Max extended length: 37,900 mm Loading floor width: 3,990 / 3,450 mm Loading floor height: 1,050 mm +/- 150 mm Height: 3,815 mm Additional information: NATO plug Hydraulic foldable ramps Outriggers + planks for widening loading floor Electro-hydraulic pump for trailer functions Spare wheel + holder Working lamps Rear bumper with lights King-pin 2.0” Central lubrication Lashing rings Wooden loading floor Marker boards for oversize load Remote control = Further information = General information: Year of construction: 2024 Design year: 2024 Axle configuration: Tire size: 245/70 R17.5 Double Fitted (143/141J) Axle brand: BPW ECO PLUS Brakes: Drum brakes Suspension: Hydraulic suspension Rear axle 1: Double tires; Lift axle; Max. axle load: 12,000 kg; Steered; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Rear axle 2: Double tires; Lift axle; Max. axle load: 12,000 kg; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Rear axle 3: Double tires; Max. axle load: 12,000 kg; Steered; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Rear axle 4: Double tires; Max. axle load: 12,000 kg; Steered; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Rear axle 5: Double tires; Max. axle load: 12,000 kg; Steered; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Rear axle 6: Double tires; Max. axle load: 12,000 kg; Steered; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Rear axle 7: Double tires; Max. axle load: 12,000 kg; Steered; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Rear axle 8: Double tires; Max. axle load: 12,000 kg; Steered; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Weights: Empty weight: 33,750 kg Payload: 100,250 kg GVW: 134,000 kg Functional: Loading floor height: 105 cm Extendable superstructure: Yes Condition: Overall condition: very good Technical condition: very good Optical condition: very good Financial information: Price: On request

Condition: new, Year of construction: 2026, Stable guardrail package for single row (1,100 mm) External dimensions: 1,500 mm, including mounting hardware 1 x end piece with perforation 1 x Z-profile 1 x center support foot 1 x U-shaped impact protection SIGMA PROFILE as a guardrail Year of manufacture: New Height: 400 mm Width: 1,500 mm Color: yellow Price: including VAT Please request shipping with the postal code. Our guardrails can also be used in other applications, e.g., on a glass wall with several components; see images 4 and 5 for details. If desired, please send us an inquiry. Other items, such as: Nwodpfozuxz Tsx Abujn Floor mount Connectors Load warning labels Impact protection Guardrails Grating Back wall grating Deep shelf profiles Barrier railings and much more... Just ask us! "Benefit from over 20 years of industry experience – we offer competent and personal advice as your experienced specialist retailer for new and used shelving systems." Sales and delivery conditions (B2B) - Prices & Logistics: All prices are quoted net ex works. Express delivery via our own fleet is possible after individual consultation. - Offer status: All offers are non-binding. Subject to prior sale. - Reservation of ownership: The goods remain our unrestricted property until full payment has been received (no right of disposal or processing). - Warranty: Exclusive distribution to commercial enterprises (§ 14 BGB). For used and IIa goods, liability for defects in materials is excluded. For new goods, the respective manufacturer's warranties apply.

Condition: new, Year of construction: 2026, The PIRANHA 310 Multi-blade or Multi-blade Circular Saw with single shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. ideal for the production of strips, squares, sawn timber, profiles, edged planks, prisms, boards, elements for pallets. SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE Nwedpfx Ashpbu Rjbuon

Condition: excellent (used), The scope of delivery includes: 01x crash barriers, second choice Clear width: approx. 2,500 mm consisting of each: 01 x C - profile, used Material color: galvanized Profile dimensions: 300 x 85 x 28 x 15 mm Material thickness: 3.0 mm Length: 2,400 mm 02x L- collision protection corners, new Material color: yellow / black according to DIN standard Height: 400 mm Unit weight: 6.10 kg Outer width: 305 mm Side length: 170 x 170 mm Hole diameter: 15.5 mm Material thickness: 5 mm 08x screws: M12 08x nuts: M12 16x washers: M12 The crash barrier guardrail is supplied compl. delivered pre-assembled. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Nodpfx Absvir Hiouswn General information about the article: This item is only offered for collection. Any other desired transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), The scope of delivery includes: 01x crash barrier, second choice Material color: yellow / black / galvanized Total height: approx. 400 mm Total depth: approx. 180 mm Clear width: approx. 2,000 mm Consisting of each: Nwjdpfx Abstq Ebdoujn 01x CS Sigma profile, used Material color: sendzimir galvanized Profile dimensions: CS: approx. 300 x 80 x 25 x 15 mm Material thickness: approx. 2 mm Length: approx. 2,000 mm 02x L - collision protection corners, new Material color: yellow / black according to DIN standard Total height: approx. 400 mm Side length: approx. 170 x 170 mm Material thickness: approx. 5 mm Weight/piece: 6.10 kg 08x screws: M12 08x nuts: M12 16x washers: M12 The crash barrier guardrail is supplied completely delivered pre-assembled. Remark: Other lengths are available on request. Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.