Used Plasma Cutting Device for sale (23,611)

Year of construction: 2010, condition: ready for operation (used), A plasma cutting system is offered. Cutting current: 20A - 130A, cutting voltage: 88V - 132V, supply voltage: 400V, max. current consumption: 46A, max. gas inlet pressure: 12bar, ignition voltage: 17kV, gas flow O2: 5300l/h, gas flow N2: 3300l/h, gas flow air: 3200l/h, protection class: IP22. Equipped with automatic gas console, plasma gas control PGC control unit, extensive hose package bundle, mobile machine frame. Machine weight: approx. 350kg, machine dimensions X/Y/Z: approx. 1100mm/700mm/1450mm. Inspection possible by arrangement. Tsdpfjy Tauhsx Al Aoc

Condition: good (used), Table shear cutting knife, replacement knife for table shears, replacement cutting, cutting knife, scissor knife, tape cutting device Tjdpjg I D Ngofx Al Asc -Manufacturer: Schleicher, cutting device from conveyor system WV-SYS 160-1050 -Cutting width: max. 900 mm -Dimensions: 1400/165 / H785 mm -Total weight: 300 kg

Condition: used, Precise angles and mitres from 0° to 46°, with digital display for angle indication Location: Nattheim Tedpfxewhzg Ue Al Ajc

Condition: good (used), Year of construction: 1997, machine/vehicle number: 71-000988, Offer 24820 Technical data: - Cutting current continuously adjustable 30 - 100 A - Duty cycle 80 A / 100% ED Tjdpfovqbdyox Al Aoc - 100 A / 80% ED - Max. cutting thickness - Steel approx. 32 mm - Aluminum approx. 25 mm - Stainless steel approx. 55 mm - Air connection 5 bar - Gas mixing system - Connection 400 V / max. 14.5 kVA - Space requirement approx. W 800 x H 1650 x D 700 mm - Weight approx. 250 kg

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, tapping attachment -Manufacturer: Tapmatic, thread cutting attachment with slip clutch -Integrated reversing gear: with quick return -Recording: MK2 Tsdpfxov Txm De Al Asc -Tap holder: Ø 10 mm -Dimensions: 260/160/75 mm -Weight: 2.4 kg

Year of construction: 2007, condition: ready for operation (used), - USED - CNC PLASMA CUTTING MACHINE WORKING AREA: 6000 x 2000 x 60 mm GENERATOR: HYPERTERM HPR130 CONTROL UNIT: GASPARINI MAX CUTTING SPEED: 0,1 - 30 m/min WEIGHT: 4400 Kg OVERALL DIMENSIONS: 6910 x 3150 x 1581 mm Tedpeyru Rgjfx Al Aec ACCESSORIES: FUME EXHAUSTER NOTE: MACHINE REVISED IN 2026

Year of construction: 2007, condition: ready for operation (used), A complete CNC gantry plasma cutting machine ESAB is available. Travel X/Y: 12000mm/4000mm, max. workpiece dimensions X/Y: 12000mm/3000mm, max. material thickness steel: 150mm, total system dimensions X/Y/Z: approx. 15000mm/5200mm/1500mm. System components: Cooling unit Kjellberg KWE 360, gas box Kjellberg PGV 3 and plasma connection Kjellberg PBA-360. The system has fire damage. Documentation available. On-site inspection is possible. Tedpsv Dkcfofx Al Asc

Condition: ready for operation (used), Year of construction: 2021, operating hours: 590 h, functionality: fully functional, table length: 6,000 mm, table width: 2,000 mm, Machine with only 590 cutting hours! Submitting a bid obligates you to collect the machine by June 30, 2026! TECHNICAL DETAILS Table length: 6,000 mm Table width: 2,000 mm Piercing: up to 16 mm Maximum permissible sheet metal thickness: 100 mm Tjdpfx Aszc Euqol Asc MACHINE DETAILS Operating hours Machine running hours: 5,400 h Cutting hours: 590 h EQUIPMENT Power source: Hypertherm Powermax 65 Pin marker TEKA filter system Thanks to a compatible cutting head, 125 amps are possible with the installation of a new power source.

Condition: used, Plasma cutting unit Harris Type Plasma Cutting H 35 A Machine No. Year of manufacture approx. 1994 Output 35 Amp. Cutting capacity approx. 4 mm Torch package length approx. 7 meters Compressed air connection approx. 6 bar Tsdpfx Alsxciume Ajc - with pressure reducer Power supply 380 Volt, 50 Hz Space requirement (L x W x H): 550 x 400 x 960 mm Weight approx. 50 kg Good condition

Condition: new, Year of construction: 2026, The CNC plasma burner with a water table is a device designed for shape cutting of elements from a sheet of metal (in any shape). This machine is characterized by extreme simplicity and ease of use. Our CNC cutter guarantees repeatability and high cutting accuracy (0.1 mm), thanks to which burnt shapes can be transferred directly to the next stage of production. The water table ensures low consumption of consumables, raw materials and low gas emissions. No need to use fume and flue gas extraction. Why is it worth it? water table no need to use smoke and fumes extraction small size of the machine allows it to be placed anywhere THC voltage height adjuster precise setting of the torch a very precise cut requiring no further processing plate detection system convenient control panel intuitive machine operation can cut and gouge steel machine training at the buyer's/seller's premises a library of standard geometric shapes Characteristics and equipment Workspace 1500 x 3000 Y axis range 140 mm (clearance) The use of a rigid and stable structure Water Table Voltage height regulator Torch height adjustment system Torch height and stabilization sensor FastCAM program - in Polish with a license USB port and internal and external memory Todpfeg Nknyjx Al Aec Friendly user interface - simple operation even for people who have never worked in programs like FastCAM Import of drawings in *.txt format from any type of program (e.g. AutoCAD, SolidWorks, etc.) MAKRO – a library of standard geometric shapes. This allows you to create figures without having to draw. NESTING – automatic arrangement of elements on the sheet DEMO - Shows the work cycle (path) without turning on the plasma or oxygen source The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 23200 € 445.44 € 1000x2000 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min unter 1/10 mm 300 l 400 kg/m² 2560 mm 1460 mm 1500 mm 400 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) height adjustment by arc voltage set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25mm price € 24.600,- € 26.100,- € 27.600,- € 30.600,- Options: water tank to quickly fill and drain thetrough € 2.360,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € Todpfx Aewiq Scjl Aoc 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 25400 € 485.14 € 1250x2500 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min 1/10 mm 470 l 500 kg/m² 3060 mm 1760 mm 1500 mm 500 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) height adjustment by arc voltage set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 Sync plasma type comp. air comp. air comp. air comp. air plunge power Todpfxowiryue Al Ajc 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25 mm price € 26.900,- € 28.400,- € 29.900,- € 32.800,- OPTIONS: water tank to quickly fill and drain thetrough € 2.870,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: like new (used), Year of construction: 2025, operating hours: 32 h, functionality: fully functional, type of input current: three-phase, working range: 4,000 mm, sheet thickness steel (max.): 50 mm, overall weight: 3,000 kg, total width: 2,700 mm, total length: 5,000 mm, workpiece weight (max.): 5,000 kg, Equipment: documentation/manual, Demonstration machine with large spare wear parts package for sale. Cutting table 4x2m and 300A XPR High Definition water-cooled Hypertherm power source. Core Plus mixed-gas console. True Hole function bolt guarantee —> Hole diameter equals material thickness (e.g. 20mm hole in 20mm plate). Top cutting results thanks to HD cutting technology. Todpfxjygczpo Al Aoc Very reliable and extremely user-friendly machine. Remote access and operation via office PC or smartphone possible, CAM software on board. - only 26 cutting hours - Includes approx. €3,000 (net) worth of wear parts - Includes 3 quick-change heads, HD water-cooled, price per piece approx. €1,500 (net) - Piercing up to 50mm with Argon Assist - Cuts up to 80mm in mild steel - Includes comprehensive training at our premises - Dismantling and loading included - 4-year manufacturer’s warranty - New price: €135,000 (net) Freight and installation available as separate offer.

Condition: good (used), Window rubber, cutting machine, seal cutter, pneumatic slat cutter, cutting device, pneumatic cutting device, pneumatic press -Cutting device: mechanical cutting device 2x 45° pivoting -Stroke: max. 70 mm -Individual components: see photos Tsdpfxsw Sk Uho Al Ajc -Dimensions: 350/250/H680 mm -Weight: 18 kg

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 285033, type of input current: three-phase, input voltage: 400 V, type of cooling: air, overall weight: 25 kg, electrical fuse: 32 A, cutting current: 105 A, hose package length: 6,000 mm, sheet thickness steel (max.): 50 mm, air demand: 15 m³/h, air pressure: 5.8 bar, protection type (IP code): IP23, product height (max.): 50 mm, High-end air plasma cutter for manual cutting. Although the system is equipped with a manual cutting torch, it can also be used for mechanical cutting. The interface for CNC cutting is already installed The manual cutting torch with a length of 6 meters is included in the scope of delivery. Tsdpfxerq E R Us Al Aoc The system was operated in our application center for demonstration purposes. The system has an effective cutting time of less than 30 minutes. Further technical information can be found in the attached document / data sheet

Year of construction: 2008, condition: ready for operation (used), Mains voltage: 3x 400V, 50Hz, fuse protection: 125A slow-blow, maximum connected load: 83kVA, cutting current at 100% duty cycle: 80 to 300A, output voltage: 112 to 200V, rated output current: 300A, duty cycle: 100%, maximum input current: 120A, protection class: IP22, insulation class: F, cooling method: AF (air cooling), no-load power consumption: 1.3kW, maximum operating pressure: 0.55MPa (5.5bar), impulse withstand voltage (Up): 17kV, plasma torch: PB-S80 W, compatible plasma gases: O₂, air, Ar, H₂, compatible swirl gases: air, N₂, length: 1375mm, width: 870mm, height: 1505mm, weight: 556kg. Inspection on site is possible. Todpfx Aezhnucol Asc

Condition: excellent (used), machine/vehicle number: 02 P 0587, cutting circuit: 15 - 40 A electrical connection: 230 V, 16 A kW Tedpfx Alsdyy Dij Aec space needed: 470 x 250 x 250 mm weight: 10 kg

Condition: used, Year of construction: 2007, 2007 Amada LC3015 XI NT, Co2 Laser Cutting Machine with CNC Control with Stacker, Donaldson Torit DCE Dust Collector & Riedel Chiller Tjdpfxjz E R Idj Al Aec Comprising: Amada LC3015 XI NT Laser Cutting Machine. 'X' Axis 3,100mm x 'Y' Axis 1,550mm x 'Z' Axis 120mm. Sheet Size 3,000mm x 1,500mm, Max 20mm Thick. Max Weight 730kg. 40CFX, 4,000 Watt Co2 Laser Resonator. Automatic Pallet Changer. BWS Transformer. Operating Terminal Beiyer E700 Stand Alone Control. Riedel Stand Alone PC 1001.1MS5.1 Chiller (2007). LKI, AS LUL 300XI Automated Compact Storage, Loading & Unloading Tower System (S/No. 1294) (2006). Sheet Size Max 3,000mm x 1,500mm, Minimum 2,000mm x 1,000mm, Thickness Max/Min 20mm/0.5mm. Mitsubishi Q Series PLC. (2) Sick MSLE03-24011 Beam Sensors. Donaldson Torit DCE Stand Alone Dust Extractor with Donaldson TCB Total Control Board. Weight of Laser Cutting Machine Approx 10,500kg. Dimensions Approx 6,500mm x 3,200mm x 2,100mm. Weight of Stacker Approx 11,000kg. Dimensions Approx 4,450mm x 2,700mm x 4,860mm High. Dimensions of Dust Extractor Approx 1,500mm x 1,400mm x 3,200mm High. Dimensions of Chiller Approx 2,860mm x 1,130mm x 2,000mm High. Power Supply 415 Volt, 3 Phase. Viewing Recommended. Please Note Technical Details of Stacker Shown within the Pictures.

Year of construction: 2024, condition: new, Machine dimensions: • (L x W x H) 5,240 mm x 3,600 mm x 2,400 mm • Width with console: 7,700 mm • Length with filter: 11,000 mm Technical details: • Max. sheet size: 4,000 x 2,000 mm • Cutting speed: 12 m/min • Positioning accuracy: ± 0.1 mm • Repeatability: ± 0.1 mm • Power (Hypertherm XPR 170 XD Optimix): 170 A • Cutting range: • Unalloyed steel, piercing, argon: 40 mm • Unalloyed steel, piercing, air: 35 mm • Unalloyed steel, contour cutting: 60 mm • Alloyed steel, piercing: 22 mm • Alloyed steel, contour cutting: 38 mm • Aluminum, piercing: 25 mm • Aluminum, contour cutting: 38 mm Standard equipment: • Control system: Durma Aurora CNC controller • Truehole Standard • Sheet metal measurement using laser • Torch height control • AC servo motors for X and Y axis • Software: Lantek or Metalix CAD/CAM software with autonesting • 50 pre-programmed part geometries for easy and quick modification Todpsdyfwkefx Al Aec • Consumable kit (torch nozzles, etc.) • Plasma torch • Ignition console • Remote control: remote maintenance Options include: • Hypertherm XPR 170 XD + Optimix + automatic gas control • Filter for HPR 170 XD • Safety system with surrounding safety wire • Oxy-fuel torch with sensor • Plasma torch – interruption system • Air dryer

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMBO (Plasma, Drilling, OXY-Fuel, Bevel), Equipment: CE marking, documentation/manual, * COMBO offers customers the most innovative technological solutions and features a wide range of models. * It is a highly advanced machine equipped with a 6- and 12-station automatic tool changer ISO 40 drilling system, offering capabilities such as drilling, tapping, countersinking, plasma cutting, OXY cutting, and ±45° bevel cutting. * The COMBO has a working range from 1,500 mm x 3,000 mm up to 4,000 mm x 24,000 mm and can be equipped with high-capacity plasma power sources. * Plasma Cutting * Drilling * Tapping * Countersinking * OXY-Fuel Cutting * Fully welded, heavy-duty machine frame. * High-durability cutting table designed for easy replacement. * Dual drive system with linear rails, rack and pinion. * Compliance with CE standards. ISO 40 Drilling System * 6-station automatic tool changer (optional 12-station). * CNC-controlled automatic coolant spraying system during cutting. * 26 kW spindle motor power. * Drilling capacity: Ø M5 to Ø M40 (HSS, UDRILL). * Drilling depth: 100 mm Tsdpfx Aoyy Rn Sel Asc * Drilling speed: 0.15 – 0.35 mm/rev. * Spindle speed: 1,500 rpm * Hypertherm / Thermal Dynamics power sources. * Hypertherm / Eurosoft CNC controls. * Possibility to import .dxf and .dwg files via Pronest / Cut-Expert CAD-CAM.

Condition: new, Year of construction: 2026, This is a state-of-the-art CNC machine dedicated to the industrial sector, used for cutting sheets and profiles, using a plasma torch. The machine is characterised, among other things, by a robust structure made of the highest quality steel and aluminium, a large cutting range, the possibility of cutting workpieces of any shape and low process costs. The high-end solutions used in production ensure reliable and safe operation. The cutting of the material is carried out in a short time, while maintaining the precision of the workpiece. In order to obtain the desired shape, it is only necessary to import the file into the software, so operation of this cutting machine is easy and intuitive. Our plasma cutting machines are primarily designed to process materials such as: - Black steel, - Stainless steel, CONSTRUCTION The frame of the plasma cutting machine is designed and manufactured from scratch in our factory. The high quality steel used for the machines is cut, then welded and machined. The entire frame, gantry and gantry arms have additional ribbing to achieve high rigidity and eliminate vibration and deformation. DRIVES Servo AC motors with high resolution and power have been used to drive our cutters, ensuring adequate acceleration and speed in each direction. These are highly dynamic and precise motors with feedback, guaranteeing zero defect by continuously controlling the operating parameters. The X and Y axes use classic and well-proven helical bars, which ensure long life and precision. FUEL Our plasma machines use components from the leading manufacturer PGCNC. The technologies used in the torch significantly increase productivity and cutting speed. HD technology provides better hole quality, increased piercing capacity and bevelling capabilities. This ensures high quality, repeatable cuts and maximises productivity with minimal running costs and reliability. KNIFE TABLE The knife table is made with technology that is resistant to working at elevated temperatures. This allows us to work continuously without worrying about the occurrence of burn-outs that prevent the material from being evenly positioned on the work table. The positioning of the scissors can be easily changed according to the size of the workpieces to be burnt. The knife table is an excellent solution for cutting thicker materials. SOFTWARE The machine is equipped with Starfire 2D CAD/CAM software. Various functions are available to the user, including the ability to import finished designs in vector formats: .dxf, .plt, .ai, .eps. The programme ensures fast and precise development of cutting paths. PLASMA SOURCE The basic plasma equipment includes the 120A cutting system, which is characterized by high productivity and cutting quality and speed. AUTOMATIC LUBRICATION SYSTEM Todpfx Aeiqn Uujl Asc Plasma cutting machine equipment also includes an automatic lubrication system that minimizes machine maintenance. The central lubrication system is a simple and functional device used to supply grease to the places where machine and equipment components come into contact. - POWER 400V 50Hz - MAX SPEED 45 m/min - DOOR SHAPE 200-600 mm - TYPE OF WORKING TABLE Knife table - WORKING TABLE WEIGHT 500 kg/m2

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, thread cutting attachment -Manufacturer: WMW, thread cutting device type GSA 1 -Recording: MK1 / B12 -Reversing gear: Quick return integrated -Clamping diameter: max 6 mm -Thread cutting sizes: M2-M4 Tsdotxkunepfx Al Aoc -Number: 1x thread cutting chucks available -Price: per piece -Dimensions: 125/100/60 mm -Weight: 0.7 kg

Condition: new, Year of construction: 2024, neu 2024 Todpfowva Iasx Al Aoc 2517 prompt, Zwischenverkauf v Deutschland 36720 € 701.35 € 1 1500x3000 mm Hypertherm Powermax 125 25 mm 25 mm 57 mm 25 mm 125 A 24 m/min 1/10 mm 400 kg/m² 3560 mm 1960 mm 1500 mm 650 kg DEMO MACHINE compressed air powered plasma sourceHYPERTHERM Powermax 125 CNC-workbench software (external PC not included) Height adjustment by arc voltage Set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules INCL. FOLLOWING OPTION: Suction bridge (prepared for suction diam. 160 mm)

Condition: good (used), Year of construction: 2003, Plasma cutting machine, plasma cutter for plasma cutting system, plasma/oxygen cutting system, servo motor, gear motor -Manufacturer: CR Electronic SRL / Power Automation, servo drive for plasma/oxygen cutting system -Cutting system: Type OXY 5.1 - 25 -Servo motor: Power Automation type PAT3B-S4-SRM50 -Individual components: see photos -Number: 2x drive unit available Todpfx Aowkqmiel Ajc -Price: per unit -Dimensions: 475/240/H140 mm -Weight: 12.4 kg/pc.

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, thread cutting attachment -Manufacturer: Fahrion, thread cutting attachment GA 30 -Shaft: MK3 -Reversing gear: integrated quick return, slip clutch Todpfewvfyusx Al Aoc -Clamping diameter: max 23 mm -Dimensions: 230/125/H80 mm -Weight: 6.3 kg