Used Plasma Cutting for sale (13,954)

Condition: used, Year of construction: 2014, ■ V304 plate cutting machine capable of processing plates up to 1.500mm x 3.000mm ■ V304 plate processing machine (including gantry beam 2.500mm and side trucks) ■ X-rail (5.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ■ Plasma cutting and extraction table (1.600mm x 3.090mm, 1 pcs) ■ Plasma cutting unit Kjellberg HiFocus280i (1 pcs) ■ Torch suspension for plasma cutting unit (including IHT M4000 PCS automatic height control) ■ Carriage for cutting unit (motor driven, including laser pointer, 1 pcs) ■ Kemper fume extraction unit 81 0550 090 (including spark trap 1 pcs) ■ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module) ■ Safety devices (safety bumpers, emergency stop cord) Technical specifications PLASMA CUTTING UNIT HIFOCUS 280i Material Mild steel, stainless steel, aluminum Min. thickness 3 mm Max. thickness 70 mm Max. pierce capacity 40 mm Cedpjy E Nyksfx Ac Nogt Dross-free cutting max. 35 mm Automatic height setting Yes, IHT M4000 PCS Marking lines Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / air (99,9% pure clean, dry, oil-free) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.100 mm / min 90A 12 mm Approx. 3.200 mm / min 160A 25 mm Approx. 2.000 mm / min 280A 40 mm Approx. 720 mm / min 280A 50 mm Approx. 400 mm / min 280A 70 mm Approx. 150 mm / min 280A * Grounding max. 6m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. COLOUR Plates RAL 3003 Red Frames RAL 7011 Grey GENERAL INFORMATION Working height 700 mm (+/- 20 mm) Voltage stabilizer Not included Ambient temperature 0 – 35°C max. 95% relative humidity

Condition: used, Year of construction: 2014, functionality: fully functional, ■ Infeed roller conveyor (length 6m, width 2000mm, roll diameter 159mm, roll distance 800mm, capacity 1250kg/m, including liftable datum line) ■ V320-2000 Plate processing system (base frame with vertical drilling unit, automatic tool changer and automatic discharge table) ■ Feeder trucks (servo driven, master truck with 3 hydraulic clamps, support truck with 2 hydraulic clamps) ■ Swarf brush (automatic swarf removal after drilling operations) ■ Oxy-fuel cutting torch (1 pcs, with automatic height control IHT M4000 Cap) ■ Plasma cutting unit Hypertherm HPR260XD (1 pcs, automatic gas console, complete with cutting parameter database) ■ Fume extraction unit Donaldson DFPRO6 ■ Product conveyor belt ■ Outfeed roller conveyor (length 3m, width 2000mm, roll diameter 159mm, capacity 1250kg/m) ■ Hardware and software (including VACAM ‘Machine Edition’, VACAM ‘Office Edition’) ■ Safety devices (safety fencing, light curtain, light curtain muting) ■ Year of construction 2014 Technical specifications Operating range V320-3000 Min. / max. plate length 850 – 6.100 mm Min. / max. plate width 200 – 2.050 mm Min. / max. plate thickness 6 – 75 mm Max. capacity 7.500 kg Material Mild steel Drilling unit VD40 Automatic tool changer 10 positions Feed Synchronous driven servomotor, servo-inverter Spindel rpm Step less 0 – 2.500 rpm (servomotor) Nominal power 30 kW Lubrication Internal and external by mist of air / oil Tool holder SK 40 Drill diameter 5 – 40 mm Thread tapping M6 – M24 Centre point marking possibility Yes Countersinking possibility Yes Layout marking possibility Yes Hydraulic clamping Yes Plasma cutting unit HPR260XD Max. thickness 64 mm Max. pierce capacity 38 mm Cgedpfx Acjy E Nxgo Not Dross-free cutting max. 32 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / Air (99,9% pure clean, dry, oil-free) Cutting speed 6 mm Approx. 4.035 mm / min 130A 12 mm Approx. 3.060 mm / min 200A 25 mm Approx. 1.660 mm / min 260A 50 mm Approx. 590 mm / min 260A 64 mm Approx. 195 mm / min 260A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. Oxy-fuel cutting unit Type Nozzle mix Automatic height setting Yes Gas supply Magnetic valve with back-fire protection Ignition Automatically Max. thickness 75 mm Gas Propane Optional gas Acetylene Cutting gas O2 Operating direction From left to right General information Voltage stabilizer Not included Current Transformer Not included Ambient temperature 0 – 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm)

Condition: ready for operation (used), Year of construction: 2018, This KERF RUM 2500P plasma cutting machine was manufactured in 2018. It features a large cutting area of 15000mm x 2000mm and is equipped with two bridges, each with 275amp plasma. Full history from the manufacturer is available. Contact us for more information about this machine. Application Types Cutting Csdpfx Acex Hbkqo Nogt

Condition: new, cutting range for steel to 15.0 TS mm cutting range for steel to 10.0 QS mm capacity at 100% 25.0 Ampere cutting medium Druckluft output von 20 - 40 Ampere voltage 230 V Air consumption 230 l/min. output Eingang 4.9 KW weight 8.0 kg range L-W-H 505 x 147 x 305 mm The Avalon 40.1 is a lightweight, handy plasma cutting system with high cutting cutting performance and top cutting quality. Its low weight and easy handling handling make it the ideal candidate for trade, workshop and industry. industry. Cuts carbon steel, stainless steel, aluminum, copper ... Features - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch for activating the air flow to set the test air pressure Cgsdpfx Aexaavcsc Net . without having to trigger the burner. - Powerful compact unit - Intelligent protection function protects the plasma torch from damage * such as incorrect air pressure, missing wearing parts, overloading of the . pilot arc max. cut for carbon steel .. 15.0 mm Optimum cutting thickness carbon steel .. 10.0 mm Stainless steel .. 10.0 mm Aluminum .. 6.0 mm Copper .. 5.0 mm Special equipment included : - 1x 3.0 m / earth cable - 1x 6.0 m / hand cutting torch "IPT-60 Coax" * Hand torch 70° * 6.0 m hose with rubber cover

Condition: new, cutting range for steel to 35.0 TS mm cutting range for steel to 25.0 QS mm ampere 20 - 65 Ampere cutting medium Druckluft voltage 400 V output Eingang 7.8 KW weight 51.5 kg range L-W-H 595 x 250 x 890 mm Avalon 65 AIR with integrated compressor Cutting - clean and reliable The Avalon 65 AIR air plasma cutting system with integrated compressor compressor is your reliable partner for demanding applications. use. With the Avalon 65 Air, you can make cuts up to a material thickness of material thickness of 35.0 mm. Features : - IGBT technology - with integrated compressor - Microprocessor control system for excellent and dynamic . Arc characteristics - CNC interface - HF-free arc starting system for increased reliability . and low EMF exposure - Manual switch for activating the air flow to set the test air pressure Csdpfxjxaaico Ac Negt . without having to trigger the torch - Intelligent protection function protects the plasma torch . from damage such as incorrect air pressure missing wear parts , . overloading of the pilot arc. * max. cutting thickness carbon steel = 35.0 mm (separating cut) * Optimal cutting thickness carbon steel = 25.0 mm (quality cut) * Stainless steel = 25.0 mm * Aluminum = 20.0 mm * Copper = 14.0 mm Special equipment included : - 1x 3.0 m / ground cable - 1x 6.0 m / hand cutting torch "IPT-60 Coax" * Hand torch 70° * 6.0 m hose with rubber cover

Condition: new, cutting range for steel to 12.0 TS mm Cgsdpjw U U Tgefx Ac Nst cutting range for steel to 8.0 QS mm capacity at 100% 30.0 Ampere cutting medium Druckluft output von 20 - 40 Ampere output Eingang 4.9 KW voltage 230 V weight 17.9 kg range L-W-H 480 x 210 x 340 mm The Avalon 40.1 is a lightweight, handy plasma cutting system with high cutting cutting performance and top cutting quality. Its low weight and easy handling handling make it the ideal candidate for trade, workshop and industry. industry. Cuts carbon steel, stainless steel, aluminum, copper ... Features - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch for activating the air flow to set the test air pressure . without having to trigger the burner. - Powerful compact unit - Intelligent protection function protects the plasma torch from damage * such as incorrect air pressure, missing wearing parts, overloading of the . pilot arc max. cut-off cut for carbon steel . 12.0 mm Optimum cutting thickness carbon steel .. 8.0 mm Stainless steel .. 8.0 mm Aluminum .. 4.0 mm Copper .. 3.0 mm Special equipment included : - 1x 3.0 m / earth cable - 1x 6.0 m / hand cutting torch "IPT-60 Coax" * Hand torch 70° * 6.0 m hose with rubber cover

Condition: used, Year of construction: 2012, functionality: fully functional, Zinser 2325-N plasma cutting system incl. oxy-fuel torch and Füchtenkötter extraction unit - Power source: HYPERTHERM HPR 260XD - CNC track control: Zinser 4010 with Windows XP Zinser cutting table with extraction system KE-L 21/91 - Working width: 2000 mm - Working length: 9000 mm - Working height: 720 mm Cgedpfoy I Snpsx Ac Not Overall length: 11,000 mm Track gauge: 3,100 mm This is a fully operational, used machine Sale is without warranty or guarantee Price excludes delivery and dismantling Subject to prior sale and errors.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 4,000 kg, table length: 14,000 mm, Equipment: documentation/manual, FOR SALE: Voortman MO Compact 900 — 6-Axis CNC Pipe Plasma Cutting Machine (2025) Manufacturer: Voortman Steel Machinery / Müller Opladen GmbH Model: MO Compact 900 Commissioned: 2025 Condition: Demo machine — less than 200 production hours, essentially as-new Type: CNC plasma pipe profiling machine (6-axis) Category: Plasma cutter / Pipe cutting machine Machine description: This Voortman MO Compact 900 is a state-of-the-art 6-axis CNC pipe cutting machine capable of processing round pipes with diameters up to 914 mm and lengths up to 12,000 mm, with wall thicknesses between 3 and 50 mm. Installed in 2025 in Belgium, this machine has less than 200 running hours, making it virtually new but available at a pre-owned price point. The 6th CNC axis ensures a constant torch-to-material distance for perfect weld preparations and bevel cuts up to ±45°. The proprietary 3D Azimuth cutting head offers torch adjustment of ±60° and 380° rotation, allowing highly accurate contour cutting for any pipe geometry. Included equipment: — Voortman MO Compact 900 pipe profiling machine (6 CNC axes with x-rail, truck, column, and cutting unit) — Hypertherm MAXPRO200 plasma source (200 A, 100% duty cycle, manual gas console) Codpfx Acoy H I Trj Njgt — 3D Azimuth cutting head with intelligent torch positioning for x-, y-, and v-bevel weld preparations — Electromechanical tracer arm for continuous pipe circularity measurement — Self-centering three-jaw chuck (1,200 Nm torque) — Pipe conveyor system on rails — Dual-point fume extraction (at cutting head and through the chuck) — Voortman Filter Unit ECO6/HCS with Donaldson Ultra-Web® cartridge technology and spark arrestor — Electrical cabinet with CNC unit, PLC, IP54 protection, and power buffer — Industrial PC with 22” touchscreen and mobile control panel — All safety devices (CE certified to 2006/42/CE and 2004/108/CE standards) — Complete technical documentation, operator manuals, and installation drawings Key specifications: — Clamping diameter range: 50 – 914 mm — Max pipe length: 12,000 mm — Max pipe weight: 4,000 kg (with pipe carriages) — Plasma bevel angle: +45° / −45° — Cutting capacity: 3 – 50 mm (mild steel) — Pierce capacity: 32 mm — Chuck rotation speed: 0 – 10 rpm — Torch carriage speed: 0 – 15,000 mm/min — Installation dimensions: 7.0 × 4.0 × 4.0 m — Machine weight: 6,000 kg Important: COROBS machine control software licenses are not included and must be obtained separately from Voortman. Voortman offers professional reinstallation, commissioning, operator training, and maintenance contracts at the buyer's site. Why choose this machine? A new MO Compact 900 currently costs over EUR 350,000 and comes with a 6–12 month delivery time. This unit delivers identical capabilities, is immediately available, and represents significant savings. Full OEM support from Voortman is available to the buyer. Location: Belgium (inspection by appointment) Delivery: Ex-works. Dismantling and transport subject to agreement. For questions or further information, please send us a message or call.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: HYFRA TYPE, CNC laser cutting machine Lasercomb, model MTL1510, 400V, year of manufacture 2000, machine dimensions 276 x 196 x 215 cm high (control panel), cooling unit Hyfra type VWK904-S, year of manufacture 2000, 84 x 82 x 143 cm high, currently dismantled. Csdpfoy D Ilpjx Ac Nsgt

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 240 h, control type: CNC control, controller manufacturer: Hypertherm, controller model: Edge Connect TC, sheet thickness steel (max.): 40 mm, working length: 3,000 mm, working width: 1,500 mm, positioning accuracy: 0.05 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 5,000 kg, warranty duration: 12 months, Used Esprit Automation CNC Plasma – High Definition XPR170 This Esprit Automation CNC plasma cutting system is presented in exceptional, near-new condition with less than 300 operating hours. Csdpfxoyzuw Tj Ac Nsgt Built for precision and reliability, this machine is equipped with a Hypertherm XPR170 high-definition plasma system, delivering superior cut quality and performance across a wide range of materials. Key Specifications: Cutting Area: 3000 x 1500 mm Plasma Source: Hypertherm XPR170 (High Definition) Gas System: VWI Gas Module Included Piercing Capacity: Up to 40 mm Mild Steel Operating Hours: < 300 hours Condition: The machine is in pristine condition, having seen minimal use in a controlled environment. Fully maintained and ready for immediate operation. Additional Information: 12-month parts warranty included Ideal for high-precision fabrication, engineering, and production environments Excellent opportunity to acquire a premium CNC plasma system at a fraction of new cost

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, CNC Plasma Cutting System 6000x3000 mm – EPL 3060 ERMAKSAN 5 AXES – Hypertherm XPR300 with OPTIMIX – Bevel Unit YEAR OF MANUFACTURE: 2024 The machine was newly sold at the end of 2024 and is being offered for sale due to the company’s insolvency. The photos in the listing were taken during the commissioning phase; current photos will be provided at a later date. CNC Plasma Cutting System • Machine type: CNC plasma cutting table • Condition: Used – in good operating condition Cgsdpfx Acey Ipb Tj Njt • Availability: Immediately available Working Area • Cutting table size: approx. 6000 × 3000 mm Plasma System • Plasma power source: Hypertherm XPR300 High-definition plasma system for precise and fast cutting of mild steel, stainless steel, and aluminum. Features • Bevel unit: BEVEL-R (5-axis bevel cutting system) for weld seam preparation and bevel cuts Extraction System • Sturdy, industrial gantry construction • High precision and productivity • Bevel cutting capability for complex parts

Condition: used, Year of construction: 2019, Waterjet cutting machine with plasma Manufacturer: TCI Cutting Model: BP-C 4020 Year of manufacture: 2019 CNC control: TCI CNC 4.0 Working area: 4x2 m Equipment: 1 cutting head KMT OEM SL-VI 50 HP 4,000 bar with high-pressure pump 1 plasma cutting head with Hypertherm XPR300 power source High voltage control system TCI SRA 4.0 Abrasive transfer system Abrasive measurement system Collision protection system Water treatment unit TCI HIDROSYSTEM 2.0 Sludge removal system Cedjykqwtjpfx Ac Negt Software: Lantek Expert 2D with automatic nesting function

Condition: used, Year of construction: 2024, CNC plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 3001.15P Year of manufacture: 2024 Working area: 1,500 x 3,000 mm Codpeytqmmjfx Ac Negt 1 x plasma torch with Kjellberg Q1500 plasma source with automatic O² gas console (O², N²) 1 x TEKA filter unit for outdoor installation 1 x nesting software on the machine control Availability: immediately

Condition: used, Year of construction: 2005, CNC portal plasma cutting machine Manufacturer: Messer Model: Omnimat L8000 Year of manufacture: 2005 CNC control: Global Control Plus Cjdpfxeykruas Ac Nogt Track gauge: 8,000 mm Equipment: 1 x oxy-fuel bevel cutting unit DAF/L for weld seam preparation (bevels) 1 x Skew Rotator with Kjellberg FineFocus 800 power source 3 x ALFA oxy-fuel torches 1 x FineMarker marking unit Without table, filter, and rail track ID 16426

Condition: used, Year of construction: 2006, CNC Portal Plasma Cutting Machine Manufacturer: Messer Model: Multitherm 4000 Year of manufacture: 2006 CNC control: Global Control Cgjdoykpd Eopfx Ac Njt Working area: 3 x 12 m Track width: 4,000 mm Travel length: 15 m Extraction table 1 x plasma torch with Hypertherm HPR260 1 x plasma torch with Skew Rotator Delta and Hypertherm HPR260 Without filtration system ä16426

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Messer Cutting Systems Model: MetalMaster 2.0 6025 Year of manufacture: 2023 CNC control: Global Control 2.0 Working area: 2,500 x 6,000 mm Cedpfxoyhd Rbe Ac Nogt 1 x plasma torch with Kjellberg HiFocus 280i neo power source Automatic gas console Donaldson DFPRO 6 Cyclopeel filtration system Cutting software: Omniwin Standard Availability: immediately Ref.: ä16426

Condition: used, Year of construction: 2019, CNC Gantry Plasma Cutting Machine Codpfxoyay H Ae Ac Njgt Manufacturer: Microstep Model: MG 4501.20 BkP Year of manufacture: 2019 CNC control Working area: 2,000 x 4,500 mm 1 x 2D plasma torch with Hypertherm XPR300 power source incl. Optimix gas console 1 x 26 kW drilling spindle, up to 40 mm diameter, incl. 8-station automatic tool changer 1 x preparation for retrofitting a rotator (for bevel cutting) 1 x nesting software integrated in CNC control ä5526 Availability: May 2026

Condition: used, Year of construction: 2022, Plasma Cutting System Manufacturer: Swift Cut Model: Pro 3000 Year of manufacture: 2022 Travel range X/Y: 3,000 x 1,500 mm Power source: Hypertherm Powermax65 SYNC Cgodpfxoyazzbj Ac Njt Max. sheet thickness, mild steel: 16 mm Max. sheet thickness, stainless steel: 12 mm Max. sheet thickness, aluminum: 12 mm Table length: 3,000 mm Working width: 1,500 mm Table width: 1,500 mm ä5526

Condition: used, Year of construction: 2019, CNC portal plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 4001.20Ptk Year of manufacture: 2019 CNC control Working area: 2 x 4 m Plasma rotator “MasterCut” with fully automatic support for weld seam preparation Csdjxnmbnepfx Ac Nsgt 1 plasma torch with Kjellberg HiFocus 280i power source TEKA filter unit ä5526

Condition: good (used), Year of construction: 2012, CNC Gantry Plasma Cutting Machine Manufacturer: Microstep Model: SPL PAA 9001.25 Year of manufacture: 2012 CNC control Working area: 2,500 x 9,000 mm Cgedpfx Aeu U Hm Aoc Nst 1 plasma torch with Kjellberg HiFocus 280i power source 2 propane oxy-fuel torches Beuting oscillating conveyor table Donaldson DFPRO12 filter unit for outdoor installation

Condition: good (used), Year of construction: 2008, CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 CNC Control: Global Control Plus Year of Manufacture: 2008 Retrofit: 2019 Extraction Table: 2,000 x 3,000 mm 1 Oxy-fuel Torch ALFA 1 Plasma Torch Power Source: Kjellberg HiFocus 280i Filtration Unit: Z-Line 9 ZDC Csdpfjiff Daex Ac Nsgt Own technicians available for installation, commissioning, and training! All spare parts in stock

Condition: used, machine/vehicle number: 10334, overall weight: 1,350 kg, This W+W PlasmaCut CNC plasma cutting machine is being auctioned online in our industrial auction / machinery auction for operating equipment of ZINK NFZ GmbH & Co. KG. Codpfxsy Hqtbj Ac Njgt

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input current: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control system: IMSNC Oxy-fuel cutting table: 3000 x 1500 mm Extraction duct left / right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Cjdpey Nd Hyefx Ac Njgt Power source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process control with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source • Operating status and error display via LED and screen • Analog and serial interfaces for adaptation to CNC controllers • Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A • Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise • Adjustable current reduction for cornering, start, and end signals of the guidance system • Automatic display of the preset cutting current • Serial data transmission for PC-based diagnostics Plasma cutting technology: Contour Cut • Further development of HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cutting quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 range 2-4 • Minimal angular deviations and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No tedious post-processing – high productivity and low costs • No additional equipment, software, or new consumables required • Standard equipment Plasma torch PerCut 200/210 • PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting • Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping • Special torches available for special applications • Higher cutting speeds reduce cost per meter • Long service life of consumables conserves resources • Narrower kerf means fewer emissions and less waste • Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip • Lower noise levels due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power source HiFocus 161i Power supply: 400 V; 3 Ph; 50 Hz Max. power input: 28 kVA (100% duty cycle) Main fuse, slow-blow: 50 A Protection class: IP22 Open circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: Max. 50 mm Recommended: 0.5 – 38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma machine torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Condition: used, Year of construction: 2016, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Eco (A) Plus Year of manufacture: 2016 CNC control Working area: 1,500 x 3,000 mm 1 x plasma with Kjellberg HiFocus 161i power source Prepared for retrofitting of an oxy-fuel torch Filtration unit Kemper System 8000 with pre-separator Cedjy Auxmepfx Ac Nogt Nesting software Asper Basic on the CNC control ä16426

Condition: excellent (used), I sell plasma cutter hypertherm powermax 800 d very good condition. /////Price listed for 1 pc ///// Plasma cutter Hypertherm Powermax 800 Plasma cutter description Cjdpoulc Ixjfx Ac Nsgt The Powermax800 plasma cutting system uses an inverter power supply to provide a smooth DC output voltage for superior cutting and gouging of mild steel, stainless steel, aluminum and other metals. The Powermax800's power supply provides a constant output current that varies from 20 to 50 amps, providing optimal performance for all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and cut metals up to 1 inch (25 mm) thick.