Used Plaster Washer for sale (1,322)

Year of construction: 2026, condition: new, IWR 2000D - The fruit washer with mill for fruits and vegetables is made entirely of high-quality stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water and, after pre-washing, transported via the conveyor belt where they are thoroughly cleaned with fresh water. Afterwards, the cleaned fruits enter the mill, where they are processed to the desired mash consistency using the selected sieve. The washing system is also equipped with a dosing attachment for pack presses. Technical Information • Nominal capacity: 1500 kg/h Godpfx Astu Ikcebmeit • Power requirement: 3 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Washing tank water capacity: 120 L per batch • Water consumption: 12 L/min • Water connection: 3/4” quick coupling • Electric control cabinet with IP65 protection rating • Swiveling Rätz mill • Equipped with rollable wheels • Easy to clean • Through the frequency converter, the conveyor capacity can be easily adjusted Dimensions: Length: 3250 mm Width: 840 mm Height: 2270 mm Weight: 160 kg

Condition: new, Year of construction: 2026, The fruit washer for fruits and vegetables is made entirely of high-quality stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. Initially, the fruits are immersed in water for thorough pre-cleaning. Afterwards, they are transported further via the conveyor belt and carefully cleaned with fresh water. Technical Information • Capacity: 1000 kg/h • Power requirement: 0.75 kW, 230 V, 6 A • Material: WNr. 1.4301, AISI 304 stainless steel • Water connection: 3/4” quick coupling Giedpjv Srp Ajfx Abmot • Electric control cabinet with IP65 protection rating • High-quality workmanship • Equipped with rollable wheels • Low maintenance requirements Dimensions: Length: 2915 mm Width: 840 mm Height: 2270 mm

Year of construction: 2026, condition: new, The fruit washer with a mill for fruits and vegetables is made entirely of stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water for a pre-wash. Afterwards, they are transported further via the conveyor belt, which thoroughly cleans the fruits with fresh water. After cleaning, the fruits enter the mill, where they are processed with the desired sieve to achieve the required mash consistency. • Easy to clean • Low maintenance requirements • Belt speed is steplessly adjustable in both directions • Equipped with 2 swivel wheels • Equipped with 2 fixed wheels Technical Information • Nominal capacity: 2000 kg/h • Power requirement: 3 kW, 400 V, 10 A • Mash discharge height: 1400 mm • Connection for washing tank: G 6/4” • Connection for cleaning: G ½” Gisdjv Srguepfx Abmot • Material: WNr. 1.4301, AISI 304 stainless steel • Water consumption: approx. 12 L/min Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg

Condition: good (used), Year of construction: 2007, 347 USED Hobart tunnel washer. EXTERNAL DIMENSIONS (in cm): - H: 220, Gijdoyt Nwwopfx Abmst - W: 145, - L: 540. ENTRANCE DIMENSIONS (in cm): - W: 86, - H: 46. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, The machine is ready for operation Gjdpsyrxr Uofx Abmoit

Condition: used, The machine is ready for operation Giodpfoyrxr Iox Abmot

Condition: used, Year of construction: 2000, operating hours: 15,800 h, Used Bottle Washer KLINGER up to 9600 bph This Bottle Washer handles up to 9,600 bottles per hour. The machine features 20 bottles per row, ensuring a long soaking time and double lye pumps. Constructed entirely of stainless steel, this bottle washer uses a Siemens S7 control system, ensuring reliable and precise operation. Technical Specifications of the Washing System The Used Bottle Washer KLINGER up to 9600 bph includes double heaters and overflow pumps, providing a high cleaning capacity. Consequently, this configuration treats each bottle uniformly, enhancing the efficiency of the washing process. The Siemens S7 control system, furthermore, offers a user-friendly interface via a touch panel, simplifying operational management. Potable Water Treatment Plant Potable water treatment plays a crucial role in the proper functioning of the bottle washer. Hager + Elsässer provides the plant, which includes cation and anion exchangers, a salt container, a pre-filter, and a UV probe. This system processes 5 m³/h, ensuring high-quality water. Additionally, the reverse osmosis (RO) plant delivers a total desalination capacity of 2.5 m³/h, ensuring pure water for the washing process. Electrical Configuration and Control Panels This Bottle Washer features three electrical panels, arranged from left to right, with a Siemens touch panel for centralized control. This configuration allows for accurate monitoring and optimal operational management. In addition, the upper panels handle cooling, with a total residence time of 4.13 minutes and a treatment time of 1.63 minutes. Technical details Bottle cells: width and diameter: height 100 mm. 360 mm spray hole in the base of the cell diameter 20 mm. The bottle cell is not round on the lower insertion side, but flattened , so that even bottles with small diameters can be inserted into the cell without any problems. Bottles from 200 ml to 1,500 ml can be rinsed. The diameter of the bottle mouth must not be smaller than the spray hole in the bottom of the cell, i.e. at least 20 mm. If the bottles are very light, or made of PVC, the spray pressure of the pumps could be reduced using software, so that the bottles are not sprayed out of the cell. Fort PVC bottles the diameter of the bottles should not be smaller than 50 mm, depending on the shape and weight. The higher the weight, the better… Giodpfxexqmrfs Abmst PVC bottles do not cause problems because of their shape or diameter, but are usually too light… So your bottles can be easily worked. Treatment and Spraying Details of the Used Bottle Washer KLINGER up to 9600 bph The central panel, on the other hand, manages the spraying times with the following specifications: Spraying soda: 0.5 min. Residual soda: 0.83 min. Hot water: 0.38 min. Warm water: 0.38 min. Cold water: 0.38 min. Fresh water: 0.

Year of construction: 2026, condition: new, The fruit washer elevator mill is made from stainless steel. Firstly, the operator of the machine pours fruits and vegetables into the washing tub with clean water. Conveyor lifts the products up to the mill. During the lifting process, water nozzles spray the fruits and vegetables with clean water. The mill crushes the products after they reach the top of the conveyor. Finally, the fruit and vegetable mash comes out of mill. Capacity – 3000 kg/h. - The crushing head of the machine is round, so all the crushed mash goes directly out for further processing. This feature significantly helps when washing the head as there are no corners. - Our round shape technology is superior to other producers’, because a lot of fruit mash gets stuck in the corners of square-shaped heads for hours and can cause juice fermentation! - Machine has additional table in front of the basin for putting fruits or boxes on it. - V form washing basin helps fruits and vegetables move directly to the conveyor, therefore less fruit stay in the basin. Integrated water-spraying system provides additional washing when lifting the fruits up the conveyor. - Belt conveyor has a water drainage and speed regulation system. - Optional replaceable cutting graters/sieves are available for different fruits and berries. - The mill does not damage the fruit seed. - Powerful 4 kW crushing engine can crush various fruits, berries and vegetables – from soft raspberries to hard apples, beets, etc. - Machine is entirely made of stainless steel and easy to clean after using. Gedoflpmkjpfx Abmoit

Year of construction: 2026, condition: new, The fruit washer mill is made from stainless steel. Firstly, the operator of machine pours fruits and vegetables into the washing tub with clean water. Conveyor lifts the products up to the mill. During the lifting process, water nozzles spray the fruits and vegetables with clean water. The mill crushes the products after they reach the top of the conveyor. Finally, the fruit and vegetable mash comes out of mill. Capacity – 1000 kg/h. - The crushing head of the machine is round, so all the crushed mash goes directly out for further processing. This feature significantly helps when washing the head as there are no corners. - Our round shape technology is superior to other producers’, because a lot of fruit mash gets stuck in the corners of square-shaped heads for hours and can cause juice fermentation! - Machine has additional table in front of the basin for putting fruits or boxes on it. It facilitates the process of pouring the products into the basin. - V form washing basin helps fruits and vegetables move directly to the conveyor, therefore less fruit stay in the basin. Integrated water-spraying system provides additional washing when lifting the fruits up the conveyor. - Belt conveyor has a water drainage and speed regulation system. - The speed of the belt conveyor is adjustable in the control panel. - Optional replaceable cutting graters/sieves are available for different fruits and berries. - The mill does not damage the fruit seed. Gjdpfxsflpfbo Abmsit - Machine is easy to clean after using. - Powerful 2.2 kW crushing engine can crush various fruits, berries and vegetables – from soft raspberries to hard apples, beets, etc. - Machine is entirely made of stainless steel.

Year of construction: 2026, condition: new, Fruit and vegetable washer AQUA 3000 is designed for washing and cleaning fruits and vegetables before processing. Fresh water and soft brushes leave product intact, wash gently and cleanly. Giodpfx Abeflpg Njmst Capacity – 3000 kg/h. - Entirely made of stainless steel. - Mounted on pivoting wheels. - Easy cleaning of the whole washer after use. - Washer cover can be opened for inspection and cleaning. - Operation at the central command box. - The speed of the washer is adjustable – the speed of the washer dictates the capacity of the processing line. - Gradual exchange of water during the washing: the inflow of fresh water comes in at the exit of the washer, the outflow of the wastewater goes out through the small tube at the entrance of washer. - Long slide at the outlet for draining fruits and removal of dirt (e.g. leaves, branches, etc.).

Condition: used, Year of construction: 2000, Used Bottle Washer Dryer Cames WDT8  Introduction Firstly, the Cames WDT8 is a highly effective and reliable solution for the bottling industry. Specifically, this advanced washing and drying system is designed to ensure optimal bottle treatment, combining cutting-edge technology with precision engineering. Moreover, the machine is encased in stainless steel, offering robustness and longevity, coupled with safety features to ensure secure operation. Giedpfx Abovgt Ucemjt Technical Features of Washing Secondly, the Cames WDT8 is equipped with an 8-head brush carousel for washing. This system effectively treats bottles, ensuring deep and uniform cleaning. Importantly, the carousel’s primitive diameter is 480 mm with a pitch of 188.4 mm, demonstrating its efficiency in handling various bottle sizes. Drying and Energy Efficiency Additionally, a distinctive element of the Cames WDT8 is its two-way drying tunnel, complete with blades and blowers, and a heated blowing bar with resistances at the top. This configuration ensures quick and effective drying, reducing processing time and increasing productivity. Notably, with a total power of 15.25 Kw and water consumption between 120 and 220 l/h, the system shows high energy efficiency. Production Capacity and Versatility Furthermore, the production capacity of this Bottle Washer Dryer ranges from a minimum of 2,750 bottles per hour to a maximum of 5,500 bottles per hour, offering great versatility for different production needs. The machine can handle a cylindrical bottle format, with the bottle entry positioned on the left, facilitating integration into the existing workflow. Conclusions of the used washer dryer Cames WDT8 In conclusion, the Bottle Washer Dryer Cames WDT8 is an excellent choice for those seeking a used bottle washing and drying system that combines high efficiency, versatility, and safety. Its robust design and advanced technical features make it a wise investment for any company in the bottling industry.

Condition: used, Year of construction: 2012, Technical Summary and Application Scope – ATES Giorgia 8000 bph The ATES Giorgia 8000 bph is a continuous-motion washing and rinsing system for glass bottles, suitable for both returnable and new bottles. It is designed for stand-alone use or seamless integration into existing or new bottling lines. Built primarily from AISI 304 stainless steel with plastic baskets and continuous-motion conveying, the machine ensures robust performance with industrial-grade safety protections. Main Technical Data Type: Industrial glass bottle washer and rinser, suitable for recycled and new bottles. Nominal output capacity: up to 8,000 bottles/hour depending on bottle format, contamination level, and line configuration. Materials: AISI 304 stainless steel structure; plastic baskets; stainless-steel doors and inspection windows. Mechanical composition: Shelves, baskets for bottle housing, and automatic loading/unloading with push bars. Easy inspection access for maintenance. Water treatment: Hot-water washing with caustic detergent (soda) followed by multi-stage rinsing. Installed electrical power: approx. 20 kW. Electrical supply: 400 V, 3-phase, 50 Hz; auxiliaries 24 V; PLC/SCADA integration (Siemens, Omron, Allen-Bradley). Water consumption: 1.0–1.5 m³/h via 1″ G (BSPP) supply, minimum 1.5 bar. Drainage: integrated rinse and tank drainage via 2″ pipeline. Compressed air: 6 bar operating pressure; approx. 20 Nl/h; 1/4″ connection. Thermal energy: approx. 250,000 kcal/h (~291 kW) via dedicated heat exchanger, compatible with steam or hot water supply; typical wash temperature around 70 °C for caustic stage. Filtration: internal filtration plus 0.2 μm microfiltration for process water. Giedpfxjxqmqzj Abmst Sanitation: cleaning and sanitization stages including pre-wash and rinse, with detergent and disinfectant dosing; thermal insulation of tanks and piping for energy efficiency. System Architecture and Process Flow Returnable bottle cycle (full washing and rinsing) Automatic loading into baskets via push bars. Pre-wash spray to remove dirt and label residues. Immersion in hot caustic bath to disintegrate adhesives and organic matter. High-pressure internal and external washing through jetting manifolds. Multiple recirculating rinses followed by a final rinse with clean water or potable/demineralized water. Continuous label and debris extraction with filtration to prevent clogging. New bottle cycle (rinsing only) Spray pre-wash. Pre-treatment with detergent solution. Internal and external washing as required. Multi-stage rinsing and transfer to filling or storage. Immersion and label management stage Pre-wash and wash for removal of labels and residues. Sequential immersion and spray jets with controlled dosing and temperature.

Year of construction: 2013, condition: good (used), functionality: fully functional, working width: 2,300 mm, Equipment: documentation/manual, GTA, Standard Line, 2300 mm (Low-E) Giedpfswplgbjx Abmjt Horizontal glass washer-dryer Manufacturer: Glastechnik-Anlagenbau, Germany Year of construction: 2013/2014 6 brushes, diameter: 160 mm Working width: 2300 mm Glass thickness: 2 - 19 mm Minimum glass size: 260 x 150 mm Feed speed: 2 - 8 m/min. Electrical connection: 400/230 V, 50 Hz, 35.5 kW In good working condition. Disassembled and ready for transport.

Condition: new, Year of construction: 2026, functionality: fully functional, The workshop washer is a universal tool that should be found in every service, garage or workshop. It is an indispensable device for fast and inexpensive dirt removal. The possibility of using the washer in a closed room is a great advantage. Washing takes place in a closed circuit, using a washing liquid heated to a temperature of up to 70 °C. The product is discharged from the gun nozzle at a pressure of up to 8 bar, thus thoroughly cleaning hard-to-reach areas and heavily soiled parts of scale, grease or oil. Both the temperature and the fluid increase cleaning efficiency. It has adjustable, level feet. The washer is very suitable for the regeneration of turbochargers and the cleaning of heavily soiled parts made of steel, cast iron, aluminium and other alloys. The lid of the washer is equipped with pneumatic cylinders to increase the safety and quality of working with the washer. The washer has a two-function gun from which either air alone or air with detergent can be discharged. The washed object can be dried with compressed air. The washer is equipped with an intuitive control panel. The water temperature is adjustable. Infinitely adjustable air pressure. Pressure gauge. Separate switch for heating the washing liquid/water. Separate switch for power supply. Technical specifications: Capacity: 160 L Detergent heating: up to 70°C Liquid tray capacity: 8-14 L Operating pressure: 5-8bar Weight: 47 kg Dimensions: 770 x 600 x 1330 mm Air adjustment Pneumatic gun Illuminated cabin Giedpfxeuc Tn Ao Abmet Ventilation We kindly inform you that the washer is for self-assembly.

Condition: new, Year of construction: 2026, functionality: fully functional, A workshop washer is a universal tool that should be found in every service center, garage or workshop. This indispensable device allows you to quickly and inexpensively remove dirt. A very big advantage is the ability to use the washer in a closed room. Cabinet parts washer ensures effective removal of various contaminants, from oils to hard-to-reach residues, ensuring safety and prolonged efficiency of components. The applied technology not only guarantees cleanliness but also provides protection against corrosion. It should be noted that cleaning results depend on the detergents used. The parts washer is designed to use up to 90 liters of cleaning solution, with a maximum tank capacity of 140 liters. To achieve maximum efficiency, the pump inlet should be covered. The pump operates in a flow range of 2.7 to 3.6 liters per minute, allowing precise cleaning of surfaces, even those with minor cracks, using a strong stream. The liquid is drawn from the bottom of the tank in a closed circuit and delivered under pressure through a flexible hose. The workshop washer has four legs, ensuring stable operation and an optimized working height. The cover locks automatically when opened. The device is also equipped with a worktop below the tank level, which can be used to place accessories for washing or cleaned parts to allow them to dry. Assembly of the device is required. Technical data: Tank capacity 140L Maximum volume of washing liquid 90L Maximum pump efficiency 2,7–3,6 l/min Power supply 230 V Dimensions 1130x540x885 mm Tray dimensions 800x500 mm Weight 43 kg Power supply 230V Gedsrh Ey Repfx Abmjit We kindly inform you that the device requires self-assembly. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, functionality: fully functional, WORKSHOP PRESSURE WASHER MP150 Features: Washing takes place in a closed circuit, using a washing liquid. The preparation comes out of the nozzle of the gun at a pressure of up to 8 Bar, thanks to which it thoroughly cleans hard-to-reach places and heavily soiled parts with carbon deposits, greases or oils. The washer is very well suited for the regeneration of turbochargers and for cleaning heavily soiled parts made of steel, cast iron, aluminum and other alloys. The cover of the washer has been equipped with pneumatic cylinders that increase the safety and quality of work with the washer. The cabin is equipped with lighting of the working area as standard. The washer has a two-function gun, from which air alone or air with a washing agent can come out. The washed item can be dried with compressed air. *We kindly inform you that the washer is for self-assembly. Technical data Capacity: 160L Liquid tub capacity: 8-14 L Working pressure: 5-8bar Weight: 29 kg Air regulation Pneumatic gun Illuminated cabin Ventilation working Dimensions: 770x610x700mm Gedpfx Abovugwmomsit

Condition: new, Year of construction: 2026, functionality: fully functional, A workshop washer is a universal tool that should be found in every service, garage or workshop. It is an irreplaceable device for quick and inexpensive removal of dirt. A very big advantage is the possibility of using the washer in a closed room. The parts washer is a guarantee of effective removal of all contaminants, from oils to hard-to-reach deposits, while ensuring safety and long-term performance of the components. The technology used guarantees not only cleanliness, but also protection against corrosion. It should be noted that the cleaning effects will depend on the detergents used. The parts washer is made to use up to 60 liters of cleaning agent, with a maximum tank capacity of 80 liters. To achieve maximum efficiency, the pump inlet should be covered. The pump operates in a flow range of 10 to 12 liters per minute, which allows for thorough cleaning of surfaces, even those with small cracks, using a strong stream. The liquid is drawn by the pump from the bottom in a closed circuit and fed further under pressure through a flexible hose. The workshop washer has 4 legs, thanks to which we have stable operation and an optimized working height. The cover locks automatically after opening. The device is also equipped with a worktop below the level of the bathtub, which can be used to place washing accessories or washed parts so that they can be left there to dry. Gjdpfx Abevugvvemoit The device requires self-assembly. Technical data: Bathtub capacity 80L Maximum pump capacity 10-12 l/min Power supply 230V Dimensions 775x540x915mm Overall dimensions inside 710x480x260mm Shelf under the bathtub 700x420mm Power supply 230V Weight 23kg

Year of construction: 1988, condition: new, Ingramatic RP1/R for washer assembly M6x75/40mm. Fixed die length: 85 mm. Godjlcbkgopfx Abmeit Moving die length: 95 mm. Die height: 65 mm. 230-600ppm. Completely overhauled like new. Machinery visible in Calolziocorte (LC) REVISION ACCORDING TO CE STANDARDS. The review includes: - Disassembly and cleaning of each piece - Replacement of all bearings - Correction of guides or possible replacement - Introducer group revision - New washer assembly group - Slide unit overhauled with bronze gibs replaced - New lubrication system with hydraulic unit complete with pump, level switch, pressure switch and distributors - New die water pump - New cup vibrator diam. 670 mm. complete with vibrator control panel and overflow photocell - Revision of the roller evacuation group - Protective casing complete with lamp and micro - Solenoid valve installation with new air system for vibrator and guides - New electrical system in accordance with CE standards complete with inverter - New engine - Belt replacement - RAL painting indicated by you

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: 20161220, For sale: FS1000 friction washer in very good working condition, ideal for plastic recycling lines. Designed for intensive cleaning of flakes and films using mechanical friction and a water injection system. * High-speed rotor system (approx. 1000-1200 rpm) * Corrosion-resistant steel construction * Continuous in-line washing operation * 3 mm screen ensures efficient separation of impurities * Can be integrated with flotation tank and drying system * The machine is fully refurbished and in perfect working order Gsdpeymy Dnofx Abmoit

Condition: good (used), For sale: stainless steel washer / water rinsing machine, previously used for processing green beans, with a working length of 4 meters, width 1.9 meters, and a height of approximately 3 meters. Giedowzwzbspfx Abmst

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Washer for plastic cans and bags Brand: Boldt Systems Model: W 400.4.3.1 Serial number: BW0 04 122 Gedpfx Aowxy Hzobmjit Year of manufacture: 2005 Steam heated Stainless steel mesh belt Belt width: (3x) 380 mm Overall dimensions: 6000 mm x 2100 mm x 2400 mm

Year of construction: 2025, condition: new, Spray cleaning plant - parts washing plant - NEW SYSTEM / pilot plant Basket useful dimensions: LxW 1.100 x 1.100 mm net height: 800 mm max. loading weight: 700 kg tank volume: 320 liters, spraying pressure: 4,3 bar, heatable up to 90°C plant completely made of stainless steel 1.4301 (AISI 304) plant incl. loading trolley in front of the plant included special equipment: - steam vapor extraction incl. condensate recirculation - autom. water refilling and level control - filter unit (coarse filter) in the return to the washing tank - preparation for retrofitting of an oil separator Giedpfx Abjhl Icqsmst - weekly timer - E-spray tube for optimized component cleaning - Inspection hatch in the tank area - Siemens Logo control with colored touch panel (4,3") On request, commissioning can be carried out by qualified personnel.

Condition: as good as new (ex-display), Year of construction: 2025, Ultrasonic washing system - ultrasonic cleaning device chamber made of stainless steel 1.4401 (AISI 316L) - incl. insulated hinged lid - incl. level control /dry run protection - incl.1 piece stainless steel basket - floor ultrasound, frequency: 38 kHz, power (eff./peak): 1.600/3.200 Watt - Heating adjustable up to 80°C; power: 6,000 watts - Basket dimensions: LxWxH 920 x 380 x 350h mm - Basin dimensions: LxWxH 1,000 x 450 x 450h mm - Outer dimensions: LxWxH 1.210 x 690 x 900h mm Giodpfxjkuy D He Abmet - max. loading weight of the basket: 50 kg - total weight of the unit: 160 kg - unit is mobile

Condition: good (used), Year of construction: 2009, Mega brand washer for preliminary cleaning of root vegetables with water spray and rotating rollers transporting the vegetables. Gjdpfx Aewydnlsbmjit

Year of construction: 2007, condition: good (used), functionality: fully functional, machine/vehicle number: 203 / 232, HIGHLIGHTS - cost-reduced ECO model - with effective and gentle HELICAL washing system - HELICAL washing system makes the machine versatile and space-saving - reduced water consumption with perfect washing results - optimal separation of foreign bodies - for example sand, stones and insects - continuous washing process - with automatic filling no operator necessary - washing, disinfection, mixing and rinsing possible in one machine - usable for e.g. lettuce, vegetables, herbs and fruit, both for cut and whole products - ideal accessibility for cleaning and maintenance TECHNICAL DETAILS Gsdpfx Abjnl Dzxomjit capacity: 1800 kg/h inlet height: 1103 mm Outlet height: 771 mm Water tank: 785 l Water outlet: 2 x 2". Fresh water connection: 2 x 3/4 inch (GEKA coupling) MACHINE DETAILS power: 5,7 kW voltage: 3 ~ 400 V; N/PE dimensions: 3807 x 991 x 1500 mm weight: 583 kg