Used Plotter Uv for sale (962)

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Fpjdpfexz Ewnjx Aayel

Condition: ready for operation (used), Year of construction: 2019, A Fujifilm UV flatbed and roll printing system is available. Roll weight: 25kg, max. roll media width: 1620mm, max. rigid media width: 1610mm, min. media width: 210mm, max. media thickness: 13mm, max. roll outer diameter: 180mm, media core diameter: 2inch/3inch, max. print length: 3030mm, media guidance: 170mm. Machine dimensions X/Y/Z: approx. 3250mm/800mm/1550mm, weight: approx. 300kg. The system was only used from December 2019 until early 2024. Documentation vorhanden. An on-site inspection is possible. Fodpfey Tav Eex Aayspl

Year of construction: 2021, condition: ready for operation (used), A complete GEW UV curing system for a Gallus Labelmaster LM 440 is offered. Max. UV output: 140W/cm, UV lamp housings: 11, including 9 housings with lamps and 2 housings for screen printing modules, Operating hours: approx. 2900h/lamp, HMI: for 10 stations, Control system: GEW RHINO HMI. Including 2 RHINO control cabinets, 2 fans, a complete exhaust duct system and mounting kit for the Gallus Labelmaster LM 440. An on-site inspection is possible. Fedszlt Rkepfx Aayspl

Year of construction: 2005, condition: ready for operation (used), Drying capacity: 2x120W/cm, total drying capacity: 14000W, working width: 600mm, lamp type: 2x120W/cm, cooling: integrated, vacuum cassette: adjustable, conveyor belt speed: adjustable, machine dimensions X/Y/Z: approx. 3900mm/1200mm/1300mm, weight: approx. 700kg, operating hours: approx. 4400h. Including ozone extraction and a new measuring device UV-Integrator Full-UV with integrated heat shield and calibration certificate. 2 converters, 2 lamps and the belt have been replaced. Documentation available. On-site inspection is possible. Fpjdpfou Afz Rjx Aayol

Condition: ready for operation (used), A 4-color central cylinder printing system WDB Systemtechnik is available. Printing units: 4, ink type: UV, max. material width: 650mm, max. printing width: 600mm, printing length range: 300mm–800mm, max. printing speed: 250m/min, material types: PET/OPP/aluminum/laminate/composite materials, material thickness range: 20µm–150µm, max. unwind and rewind roll diameter: 1000mm, operating hours: 28h, printed length: approx. 57000m. System components: unwind and rewind unit, corona, UV dryer, drying channel, IR heater, cooling unit, and supply and exhaust air fan. Including lamination unit. Documentation available. An on-site inspection is possible. Fjdpoxmkctofx Aayjpl

Condition: like new (used), Serial: 26557-PO1 Fjdpfjhxyq Ejx Aayjpl Stainless, variable speed conveyor with UV disinfection zone, the UV disinfection zone consists of two arrays of UV lamps, the top array is mounted above the wire belt and bottom array of lamps is mounted below the wire facing upwards. This is set up to achieve disinfection on all sides of a product placed on the conveyor, HMI touch screen controls, belt dimensions 3500mm x 500mm, stainless wire mesh belt, with manual, 1Ph

Condition: excellent (used), Dr. Hönle Dr. Hönle UV Technology – Bluepoint LED High-Power + Bluepoint 2 easycure – Complete System incl. LED Spots & Manuals For sale is a complete UV curing system by Dr. Hönle, consisting of two control units and several LED spots. Ideal for professional applications in electronics manufacturing, medical technology, optics, plastics processing, and laboratory operations. Description: The system includes: - Bluepoint LED High-Power Control Unit (REF 45250.c) - Bluepoint 2 easycure Control Unit (REF 33900.a) - Several UV LED spots (e.g., 365 nm, air-cooled) - BP-LED 4-1 Adapter (REF 45970.a) – for controlling up to 4 spots - Original operating manuals + CD The units enable precise control of exposure time, intensity, and energy – ideal for reproducible industrial UV curing processes. Technical Data: Bluepoint LED High-Power (45250.c): - Power supply: 36 V / 5.5 A Fpjdpszimamjfx Aaysl - Control for up to 4 LED spots - Adjustable UV intensity - Timing programs and energy measurement Bluepoint 2 easycure (33900.a): - 230 V AC, 50 Hz - 570 VA power consumption - High-performance LED control - Industrial quality, Made in Germany Total Dimensions/Weight: approx. 12–15 kg Important Note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) - Bluepoint LED High-Power - Bluepoint 2 easycure - LED spots (air-cooled) - BP-LED 4-1 adapter - Operating manuals - CD - Original documentation (subject to changes and errors in technical data and information!) We are happy to answer further questions by phone.

Condition: excellent (used), Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating sunlight and weathering effects. This device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3). Technical Details UV Spectrum: approx. 290–450 nm (UVA/UVB) Lamp type: Fluorescent UV lamps Temperature range (UV phase): approx. +20 to +80 °C Climate cycling: Alternating between UV irradiation, condensation, and spray phases Humidity range: approx. 10% to 95% r.H. (relative humidity) at temperatures above approx. +10 °C Fjdpfx Ajziiz Hsayspl Temperature change rate: approx. 3 K/min Test chamber dimensions: Height 750, Width 650, Depth 400 mm External dimensions: Height 1800, Width 920, Depth 1345 mm Voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 9.0 kW Rated current: 15.0 A Refrigerant: R 404A For your safety as a buyer! The following points are always carried out on our chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) Further questions can be answered for you by phone.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 2 h, functionality: fully functional, shaft length: 355 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: water, warranty duration: 12 months, laser wavelength: 355 nm, input frequency: 50 Hz, Equipment: cabin, UV laser engraving machine with 20-watt laser power Laser source with 355nm wavelength / 20 watts Exhibition machine, with approximately 2 hours of operation - No discernible signs of wear - Includes rotary axis - Includes Windows 64-bit PC system - Includes 22" monitor - Everything is fully installed and calibrated - Engraving software in German - 3D software (MM3D) - Very easy to operate - Simply turn on and start - UV laser source with 20 watts for high-contrast and fast marking with extremely high resolution - Engraving on virtually all metals (stainless steel, brass, aluminum, etc.) - Engraving on virtually all plastics (including PVC, silicone, etc.) - Engraving on real glass (including crystal glass) - Cutting of real glass is possible - Heavy-duty industrial quality - Complete system / ready for immediate use - Work area approximately 500 x 600 x 600 mm (L x W x H) - Clamping surface with mounting threads in a 50mm grid - LED work area lighting - 50mm pipe connection for fume extraction - Engraving area approximately 150x150 / 200x200 / 300x300 (switchable) - 3D scanner for marking surfaces of any shape - Includes foot switch to start the engraving process Sales are exclusively to commercial businesses. Delivery / Consultation / Sales only in Germany / Austria / Switzerland Please also note our attractive leasing/hire purchase offers. Fedpfxjflrnas Aayjpl Machine dimensions approximately: Width: 800mm Height: 1800mm Depth: 1000mm Weight: approx. 180kg

Condition: used, Digital color printer, Roland Versa UV LEF2-200 Location: Bad Tölz Fedpfx Aszv Sncjayopl Inspection is welcome. We have other used machines available. Please contact us.

Year of construction: 2008, condition: ready for operation (used), A large format plotter ROWE RCS 6000-4 with a longitudinal and cross folding system ROWE ROWEFOLD 721-4 and a sorter, counter reading: 170,000 linear meters/ 97,000m². Fodpspy Eu Hsfx Aayspl

Year of construction: 2013, condition: ready for operation (used), Connected load: 4kW, weight: 1t. Fpjdpehlp Efsfx Aayol

Condition: used, Hardness testing device, hardness measuring machine, hardness tester, hardness tester -Hardness tester: according to Brinell and Rockwell Accessories are missing and therefore it is sold as defective. -Handover in its current condition as inspected Fpsdpsb A Rkvofx Aayjl -Dimensions: 600/220/H660 mm -Weight: 92 kg

Condition: good (used), Simatic panel, operator panel, machine control, interface panel, operating unit, control panel, keyboard, control panel teach pendant -Manufacturer: Basler, Operator Panel from printing machine OMSO Novadisc 4 3S UV Fsdowz H Rrepfx Aayspl -Type: unfortunately without type designation -Dimensions: 615/190/H445 mm -Weight: 28.1 kg

Year of construction: 1997, condition: used, Control for UV dryer, UV lamp, UV high-performance lamp, infrared dryer, UV dryer system, UV surface lamp, UV painting system -Manufacturer: IST Metz, control for UV dryer lamp -Type: M-20-1-S-SS -UV tubes: type M 200 S 2 -UV range: 180-450mm -Quantity: 4x controls available -Price per piece -Dimensions: 600/360/H600 mm -Weight: 77kg/piece Fpsdpfx Ajrd Acpjayel

Condition: used, Machine base soil tillage machine, floor cleaning machine, floor curing machine -Manufacturer: Minuteman, Multi-Clean machine base tillage machine -Type: 670691 UV-8 Power Supply Fjdpfx Aaoqwpryjyopl -Voltage: 230V -Dimension: 600/440/H370 mm -Weight: 29 kg

Condition: used, UV dryer, UV lamp, UV high-performance lamp -The lamps come from a UV paint drying process -Working width: 1400 mm -One housing -UV range: 180 - 450 nm -UV tube type: CK 110/80 -Emitter power: 80 W / cm -Number: 2x tubes available -Price per piece -Transformers and accessories: available for an extra charge -Dimensions: 1720/340 / H630 mm -Weight: 94 kg / piece Fedpfx Ajcft Tvjayopl

Condition: good (used), UV dryer, UV lamp, high-performance UV lamp -the lamps come from a UV paint drying process -Working width: 1400 mm -Double housing -UV range: 180 - 450 nm -UV tube type: CK 110/80 - Radiator power: 80 W/cm² -Quantity: 3x dryer lamps, each with 2 tubes included Price: per piece Fedpjcft T Hsfx Aayspl -Transformers and accessories: available at extra cost (2x ID13948 and 2x ID13949 or ID13950) -Dimensions: 1720/400/H630 mm -Weight: 126 kg/piece

Condition: good (used), UV dryer, UV lamp, UV high-performance lamp, infrared dryer, UV dryer system, UV surface heater Fjdpfx Aeqw D Ebjayopl -Manufacturer: Hönle, UV drying system for drying paints, varnishes and plastics -Type: Uvaprint 420 HPLK, incl. lamp -Number: 4x UV dryers available -Price: per piece -Dimensions: 600/355/H140 mm -Weight: 16 kg/piece

Condition: good (used), Telecentric lighting, LED lighting, telecentric lens, measuring lens, industrial camera -Manufacturer: Basler, Operator Panel from printing machine OMSO Novadisc 4 3S UV -Type: TM-6CN -Lens: Schneider XNP 1.9/35-0501 -Dimensions: 600/80/H100 mm Fpedswz Ianepfx Aaysl -Weight: 2.5 kg

Condition: ready for operation (used), Year of construction: 2014, An industrial large-format digital printer is offered. Max. print area: 3020mm x 2020mm, compressed air requirement: 7-10bar (100-150PSI), short-circuit withstand strength: 10kA, control: PLC. Equipped with UV curing system, vacuum table. Weight: approx. 3750kg, overall dimensions X/Y/Z: approx. 5950mm/2900mm/1550mm. Inspection possible by arrangement. Fpedjzcfibepfx Aayel

Year of construction: 2021, condition: used, Manufacturer : Thémis Technologies Model: 5173 TT Year: 2021 Type: UV laser marking station Laser : keyence mdu1000C Application: The equipment is designed to laser mark different products with different types of materials. - Glass or plastic jars of different diameters - Coloured plastic bottles of different sizes - Coloured plastic tubes This equipment performs the following functions: - Receiving the product from a conveyor belt. - Detection of the product at the entrance of the machine. - Transition of the product to the laser. - When a bottle is detected, activation of the suction and laser marking. - Discharge of the marked product. A Bofa Ad Access vacuum cleaner is placed on the side outside the cabin and connected to a nozzle near the marking area. Height: 2150 mm (with glasses) Width: 1250 mm (without screen) Length: 2530 mm (with conveyor) Equipment included: printer, control computer, ... Fpedpfx Asx R Aqtjayel Documentation, drawings, backup, software available.

Condition: excellent (used), Henkel UVALOC 400 Loctite 97039 Curing Chamber The UVALOC 400 curing chamber (LOCTITE 97039) is a surface irradiation curing system developed for curing light-curing adhesives using UVA radiation and visible light. It is suitable for manual curing of individual parts during the manufacturing process as well as for laboratory use. The device integrates the following: a control unit with an integrated power switch and operating hour counter a lamp housing with the burner reflector igniter. Includes a UV protection box. Features: Contains a 400 W metal halide lamp Optimized for light emission in the UVA range Typical curing area 10 x 19 cm Expected UV lamp life up to 1000 hours The power supply can be detached from the lamp module and operated separately Adjustable lamp height for optimal irradiation With a glass filter to prevent short-wave UVB/UVC emission Technical data: Mains connection 230 V AC ± 4%, 50 Hz Power consumption approx. 460 W Fpjdpfx Aaozg Expjysl Mains fuse 2 x 5 A, slow-blow Glass tube fuse 5 x 20 mm Warm-up time of the UV lamp 3 minutes Lamp type 400 W high-pressure metal vapor lamp with double-ended base Lamp life approx. 1000 hours Intensity See section 5.1 Dimensions (width x height x depth): 220 mm x 472 mm x 300 mm Ambient and operating temperature +10 °C ... +30 °C Storage temperature -10 °C ... +60 °C Weight ~ 11.5 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, A laser marker that can operate anything? Indeed! This is the Wattsan UV TT, an ultraviolet marker that works with a variety of materials, including leather, ceramics, glass, rubber, wood, leather, fabric, gems, organic and electrical components. The Wattsan UV TT is suitable for QR-codes, bar-codes, data and time, and any other images. This marker can operate big workpieces; the scanning tripod can be taken off and placed on the deck. Additionally, you may alter the machine's functionality by just switching out the lenses! You can give our managers a call for additional details! Wattsan UV TT machine characteristics: Working area: from 75x75 to 300x300 mm Laser power: 3/5/10/15 W Machine size: 880x420x1000 mm Packing size: 960x500x1100 mm Weight: 82 kg Laser sourse: JPT Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 20 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. Fpjdpfor D Ngtjx Aaysl YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, This listing is for Thermo Scientific Evolution 300 UV-Visible Spectrometer The unit is in full working condition and ready for immediate use This high-performance double-beam spectrophotometer delivers exceptional accuracy and versatility for demanding research and routine quality control applications. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Fsdpozdurmjfx Aayopl